What is a hammer toe and how do I prevent this?

What is a hammer toe and how do I prevent this?
by

1 Answer

Answer :

Hammer toe is a term used to discribe a person whos toe bends downward and the middle joint curls up. This eventually results in the toe getting stuck into a claw-like position. When a person's shoe rubs against a hammer toe they can develope corns, blisters, and calluses that may form on the toe itself or on the bottom of their foot. This can make walking very painful. If you wish to read more about hammer toe you can find some great information here http://www.clevelandclinic.org/health/health-info/docs/0900/0953.asp.
by

Related questions

Can a hammer toe be treated without surgery?

Description : Can a hammer toe be treated without surgery?

Last Answer : If you are able to straighten the toe by pulling on it, then it can be treated without surgery. A podiatrist can use padding or splint the toe to help keep it straight, and a switch to deeper shoes with more room in the toe area will help keep all toes in a more natural position.

What is hammer toe and how is it treated?

Description : What is hammer toe and how is it treated?

Last Answer : Hammer toe is an irregularity that causes the toe to be bent awkwardly at the second joint. This is a very painful issue that can be treated surgically or non surgically. Instead of doing ... about the deformity and treatments that are best for you, your financial situation, and overall health.

What causes and how can I treat or prevent this toe nail pain?

Description : What causes and how can I treat or prevent this toe nail pain?

Last Answer : I had a similar problem a few months ago. A podiatrist advised me to soak it in warm water with Epson Salts and buy sneakers with more toe room. Took a few weeks but the pain finally went away. Good luck.

What is the ambient temperature in hammer-space?

Description : What is the ambient temperature in hammer-space?

Last Answer : The temperature of hammerspace is around 294 degrees Kelvin. This temperature is maintained by the transdimensional fold or warp energy produced when objects are brought into or taken out of hammerspace. To ... to the second law of thermodynamics, is manifested as heat. Doesn't everyone know that?

This is the most important question ever asked in the history of humanity. Could Son Goku lift up Thor's hammer?

Description : This is the most important question ever asked in the history of humanity. Could Son Goku lift up Thor's hammer?

Last Answer : I despair for humanity if this is the most important question confronting it. All is lost!

How long does discoloration last from having bashed my nail with a hammer?

Description : How long does discoloration last from having bashed my nail with a hammer?

Last Answer : That's not all that long for it to last and it's small so I wouldn't worry about it too much. I've done it so the entire nail turns black and eventually falls off. That's usually quicker, about two to ... out, but it doesn't sound that bad that you need to do that. And don't try it on your own.

Could BP's closing off the well create a hydraulic hammer?

Description : Could BP's closing off the well create a hydraulic hammer?

Last Answer : answer:That is why they closed the valves off gradually, to allow the pressure to build up slowly. Also - this is not entirely hydraulic. There is a considerable amount of methane in the flow, which ... Potentially, you have more of a blowout risk from the gas pressure than you do from the oil.

What can you fix with a hammer and duct tape?

Description : What can you fix with a hammer and duct tape?

Last Answer : Everything. Might not work or last. But you can “fix” it.

Hammer flipping mystery (see details)

Description : Hammer flipping mystery (see details)

Last Answer : answer:well i believe that it is simply that the differences in mass cause a torque about the handle, causing it to spin, but it may not be as simple as that. i also like the tags for this question :)

To kill a fly with a hammer: a language question.

Description : To kill a fly with a hammer: a language question.

Last Answer : answer:I’m not fully understanding what you’re asking here. There’s a clear escalation in the four possible endings you suggested. But what about it is supposed to trouble me? If I thought you were going to eat the cookie and you said I was on crack? I could use a cookie…

A hammer gains 50 Ns momentum in 0.05 sec. The average force on the hammer will be a.500 N b.2000 N c.1500 N d.107 dynes e.1000 N

Description : A hammer gains 50 Ns momentum in 0.05 sec. The average force on the hammer will be a.500 N b.2000 N c.1500 N d.107 dynes e.1000 N

Last Answer : e. 1000 N

The fight is almost coming to an end after a five minute battle. Team one lost all of the members, except for leader Joe who carries a big hammer, which is very dangerous and strong. Team two had two remaining people with no leader but one person who uses a bat and one person that uses an axe. Team two tried cornering Leader Joe, who then surrendered. Despite the fact that leader Joe had a bigger and much more dangerous weapon than the two on the other team, why did he surrender? -Riddles

Description : The fight is almost coming to an end after a five minute battle. Team one lost all of the members, except for leader Joe who carries a big hammer, which is very dangerous and strong. Team two ... bigger and much more dangerous weapon than the two on the other team, why did he surrender? -Riddles

Last Answer : It was a checkmate!

Write the missing half of each word pair ?11. Peace and12. Thunder and13. Back and14. Thick and15. Tooth and16. Sticks and17. Aches and18. Bread and19. Hammer and20. Hide and -Riddles

Description : Write the missing half of each word pair ?11. Peace and12. Thunder and13. Back and14. Thick and15. Tooth and16. Sticks and17. Aches and18. Bread and19. Hammer and20. Hide and -Riddles

Last Answer : 11. Quiet 12. Lightning 13. Forth 14. Thin 15. Nail 16. Stones 17. Pains 18. Butter 19. Nail 20. Seek

I can slash but I have no knife, I can dash but I have no legs, I can pound but I have no hammer, I can star but I have no stage.What am I? -Riddles

Description : I can slash but I have no knife, I can dash but I have no legs, I can pound but I have no hammer, I can star but I have no stage.What am I? -Riddles

Last Answer : A Keyboard.

What is the energy conversion of a hammer and strikes a nail into a plank?

Description : What is the energy conversion of a hammer and strikes a nail into a plank?

Last Answer : john lifts a hammer and strikes a nail into a plank. Which of the following energy conversion take place?a. Kinetic energy→potential energy→heat and sound energy b. ... energyc. Kinetic energy→potential energy→heat energy→sound energyd. Potential energy→heat energy →sound energy and kinetic energy

john lifts a hammer and strikes a nail into a plank. Which of the following energy conversion take place?

Description : john lifts a hammer and strikes a nail into a plank. Which of the following energy conversion take place?

Last Answer : a. Kinetic energy→potential energy→heat and sound energy b. Potential energy→kinetic energy→heat and sound energyc. Kinetic energy→potential energy→heat energy→sound energyd. Potential energy→heat energy →sound energy and kinetic energy

Does the back of the head hurt like a hammer after a while ? What are the symptoms ?

Description : Does the back of the head hurt like a hammer after a while ? What are the symptoms ?

Last Answer : answer:

What kind of scales does hammer fish have ?

Description : What kind of scales does hammer fish have ?

Last Answer : Hammer fish has placoid type scales on its body.

What is a hammer ?

Description : What is a hammer ?

Last Answer : Hammer or hammer , hammer or hammer is called hammer.

Why is the smooth thicker drawing quarter called 'hammer'?

Description : I can't think of any connection .... or maybe this name is somehow related to the production process?

Last Answer : In the background of the term hammer paper is the logo of the Schoellershammer paper mill, which has been operating in North Rhine-Westphalia, Germany, for about 200 years. In the name of the founder of ... paper from this paper mill used to be marked with an embossed mark in the shape of a hammer.

How to set a hammer on a roof?

Description : I don't want to start my motorcycle. Mustang 50 (roof). How far are the hammers set? Thank you

Last Answer : I guess at 1.6 mm. The advance value is the displacement of the piston from the top dead center to the closing of the breaker contacts when turning the crank counterclockwise. We adjust by turning ... oil so that the breaker tappet is not abraded and thus the detachment is not detuned in advance.

I burned a cd of hammer sounds and it will not play on a cd player it will only play on my laptop

Description : I burned a cd of hammer sounds and it will not play on a cd player it will only play on my laptop

Last Answer : Need Answer

What role did Fannie Lou Hammer play in the civil rights movement

Description : What role did Fannie Lou Hammer play in the civil rights movement

Last Answer : Need Answer

What eats a northern hammer hawk eat?

Description : What eats a northern hammer hawk eat?

Last Answer : Need answer

If the gravitational force between the earth and object always causes the same acceleration why does a feather fall more slowly than a hammer does?

Description : If the gravitational force between the earth and object always causes the same acceleration why does a feather fall more slowly than a hammer does?

Last Answer : Need answer

What is a good personification for hammer?

Description : What is a good personification for hammer?

Last Answer : a hammer danced on the wood

How is the red soft face hammer insert classified per the hardness matrix?

Description : How is the red soft face hammer insert classified per the hardness matrix?

Last Answer : extra hard

How does James gleick suggest a book and hammer are alike?

Description : How does James gleick suggest a book and hammer are alike?

Last Answer : H

What is the proper name for the hammer a doctor uses to test your reflex?

Description : What is the proper name for the hammer a doctor uses to test your reflex?

Last Answer : The proper name for the hammer a doctor uses to test your reflex is just "reflex hammer". It is a medical instrument used by physicians to test deep tendon reflexes and is an important part of a neurological physical examination.

Is it possible to fix a fiber glass hammer handle?

Description : Is it possible to fix a fiber glass hammer handle?

Last Answer : Unfortunately, fiberglass is very difficult to fix. It may be best to purchase a new hammer.

Is it true that actor armie hammer is secretly a bisexual?

Description : Is it true that actor armie hammer is secretly a bisexual?

Last Answer : yes

The sales tax on a $20 hammer is 7 percent, or $1.40. Why is this tax a bigger burden for Josh, who has a $15,000 income, than for Aaron, who has a $150,000 income?

Description : The sales tax on a $20 hammer is 7 percent, or $1.40. Why is this tax a bigger burden for Josh, who has a $15,000 income, than for Aaron, who has a $150,000 income?

Last Answer : The tax represents a larger proportion of Josh’s income.

An iron hammer, lying in the sun, appears much hotter than its wooden handle because (a) iron is at a higher temperature (b) iron is darker than wood (c) iron absorbs more heat (d) iron is a good conductor of heat

Description : An iron hammer, lying in the sun, appears much hotter than its wooden handle because (a) iron is at a higher temperature (b) iron is darker than wood (c) iron absorbs more heat (d) iron is a good conductor of heat

Last Answer : Ans:(d)

A hammer in the hands of a house-wife is a ______ good. (1) consumer (2) capital (3) free (4) intermediary

Description : A hammer in the hands of a house-wife is a ______ good. (1) consumer (2) capital (3) free (4) intermediary

Last Answer : (4) intermediary Explanation: Good is any tangible item, whether produced or found naturally and which is available for exchange. Free good is a good that is so abundant is supply that it has no ... product that is used as an input into the production process of either the same firm or another.

Which one of the following is not a true fish? (1) Silver fish (2) Saw fish (3) Hammer fish (4) Sucker fish

Description : Which one of the following is not a true fish? (1) Silver fish (2) Saw fish (3) Hammer fish (4) Sucker fish

Last Answer : (1) Silver fish Explanation: Lepisma saccharina, frequently called a silverfish or fish moth is a small, wingless insect in the order Thysanura. Silverfish are always wingless and are 'silvery ... while the scientific name indicates the silverfish's diet of carbohydrates such as sugar or starches.

The most effective method of locating a loose commutator bar in a D.C. motor is by _____________. A. visual inspection B. jiggling each by hand C. sounding each bar with a light weight hammer D. checking with a calibrated torque wrench

Description : The most effective method of locating a loose commutator bar in a D.C. motor is by _____________. A. visual inspection B. jiggling each by hand C. sounding each bar with a light weight hammer D. checking with a calibrated torque wrench

Last Answer : Answer: C

Encrusted dirt accumulated inside a motor should be removed with a _____________. A. fiber scraper B. pointed welding rod C. hammer and chisel D. paint scraper

Description : Encrusted dirt accumulated inside a motor should be removed with a _____________. A. fiber scraper B. pointed welding rod C. hammer and chisel D. paint scraper

Last Answer : Answer: A

When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Description : When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Last Answer : Answer: C

If concrete compression test fails, should Schmidt hammer test be adopted as an alternative test to prove the concrete strength?

Description : If concrete compression test fails, should Schmidt hammer test be adopted as an alternative test to prove the concrete strength?

Last Answer : The Scmidt hammer test is based on the elastic rebound of hammer which presses on concrete surface and it measures the surface hardness of concrete. Since the test is very sensitive to the ... strength of concrete. Therefore, it may not be considered a good substitute for concrete compression test.

Run of mine (ROM) coal is crushed by a __________ for use in domestic ovens. (A) Jaw crusher (B) Hammer crusher (C) Ball mill (D) Tube mil

Description : Run of mine (ROM) coal is crushed by a __________ for use in domestic ovens. (A) Jaw crusher (B) Hammer crusher (C) Ball mill (D) Tube mil

Last Answer : (B) Hammer crusher

The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Description : The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Which of the following is not an ultrafine grinder (colloid mill)?(A) Micronizers (B) Agitated mills and fluid energy mills (C) Toothed roll crusher (D) Hammer mills with internal classification

Description : Which of the following is not an ultrafine grinder (colloid mill)? (A) Micronizers (B) Agitated mills and fluid energy mills (C) Toothed roll crusher (D) Hammer mills with internal classification

Last Answer : (C) Toothed roll crusher

For grinding of cereals, grains, spices, pigments, saw dust, cork etc., the most extensively used size reduction equipment is a(A) Buhrstone mill(B) Ball mill(C) Crushing rolls(D) Hammer mill

Description : For grinding of cereals, grains, spices, pigments, saw dust, cork etc., the most extensively used size reduction equipment is a (A) Buhrstone mill (B) Ball mill (C) Crushing rolls (D) Hammer mill

Last Answer : (A) Buhrstone mill

The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

To get ultrafine particles, the equipment used is a (A) Ball mill (B) Rod mill (C) Hammer crusher (D) Fluid energy mill

Description : To get ultrafine particles, the equipment used is a (A) Ball mill (B) Rod mill (C) Hammer crusher (D) Fluid energy mill

Last Answer : (D) Fluid energy mill

In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)

Description : In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In case of a hammer crusher, the final product size depends on the (A) Feed rate (B) Rotor speed(C) Clearance between hammer & grinding plates(D) All (A), (B) and (C

Description : In case of a hammer crusher, the final product size depends on the (A) Feed rate (B) Rotor speed (C) Clearance between hammer & grinding plates (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Size reduction of asbestos and mica is done by (A) Hammer mills (B) Rod mills (C) Gyratory crushers (D) Crushing rolls

Description : Size reduction of asbestos and mica is done by (A) Hammer mills (B) Rod mills (C) Gyratory crushers (D) Crushing rolls

Last Answer : (A) Hammer mills

. To produce talcum powder, use (A) Ball mill (B) Hammer mill (C) Jet mill (D) Pin mill

Description : . To produce talcum powder, use (A) Ball mill (B) Hammer mill (C) Jet mill (D) Pin mill

Last Answer : (A) Ball mill

Limestone is normally crushed in a (A) Roll crusher (B) Hammer crusher (C) Ball mill (D) Tube mill

Description : Limestone is normally crushed in a (A) Roll crusher (B) Hammer crusher (C) Ball mill (D) Tube mill

Last Answer : (B) Hammer crusher