Is it easy enough to change an electric light fixture that I can do it without hiring a contractor?

Is it easy enough to change an electric light fixture that I can do it without hiring a contractor?
by

1 Answer

Answer :

It can be dangerous my dad does it but you need to turn the power off.
by

Related questions

Do you have to pay a deposit when hiring an air conditioning contractor?

Description : Do you have to pay a deposit when hiring an air conditioning contractor?

Last Answer : A deposit is up to the individual contractor. Sme contractors may start the work with no deposit.

Hiring a Kitchen Sink Repair Contractor?

Description : Hiring a Kitchen Sink Repair Contractor?

Last Answer : Your kitchen sink Plumbing is the most crucial in your house, as it is where much of your time is spent preparing meals and washing dishes. To avoid paying extra for plumbing contractors, you ... top contractors in your area and eliminating from your list the ones who fail to meet your criteria.

Is it normal for a light bulb to break and hang from the light fixture by a wire?

Description : Is it normal for a light bulb to break and hang from the light fixture by a wire?

Last Answer : answer:Incandescent bulbs? If so, then yes, they often do that. Turn off the light switch when unscrewing them. If you can’t get the base out, a potato (or in my case a pliers) can assist in getting out the remains. Did you by any chance buy really cheap bulbs?

Sound Technical advice for wiring a room that already has a sconce light for a ceiling fixture?

Description : Sound Technical advice for wiring a room that already has a sconce light for a ceiling fixture?

Last Answer : If the wall is an interior wall then it should be an empty cavity. If it is an old home you may have fire stops inside the walls that will be a dead end when you attempt to fish the wire down. Make ... a good idea to know how much load is already on the circuit if you want to still use the sconce.

How to find 120v double contact bayonet light bulbs for an antique light fixture from Australia?

Description : How to find 120v double contact bayonet light bulbs for an antique light fixture from Australia?

Last Answer : I’d bet that the lamp uses bulbs based on the British standard. Chances are good that it takes a BA22d bulb. This was the only one commonly used for domestic lighting, and the base diameter (22mm) is right.

Ceiling Light Fixture?

Description : Ceiling Light Fixture?

Last Answer : form_title= Ceiling Light Fixture form_header= Light up your life with a ceiling light fixture. What is the height of your ceiling?*= _ [50] Do you want to include a ceiling fan? How many light fixtures do you need installed?*= {1, 2, 3, 4, 5, More than 5}

How to Replace an Exterior Light Fixture?

Description : How to Replace an Exterior Light Fixture?

Last Answer : How to Replace an Exterior Light FixtureReplacing an exterior light fixture is not difficult at all and you can do it even if you have limited electrical experience.Cutting the PowerBefore you do any ... . Turn the power back on at the circuit breaker box and test your new fixture connection.

Do you remember the smelly green modeling clay that was a fixture of my youth, and is it still available?

Description : Do you remember the smelly green modeling clay that was a fixture of my youth, and is it still available?

Last Answer : I had to make a model of the human brain with that stuff. Went straight into the garbage after it was marked.

What do you call the fixture that cooks use to hang things from?

Description : What do you call the fixture that cooks use to hang things from?

Last Answer : Pot racks

Coast Guard Regulations (46 CFR) require that lighting fixture globes must be protected by guards if the fixtures are located in the ____________. A. steering gear room B. galley C. living quarters D. wheelhouse

Description : Coast Guard Regulations (46 CFR) require that lighting fixture globes must be protected by guards if the fixtures are located in the ____________. A. steering gear room B. galley C. living quarters D. wheelhouse

Last Answer : Answer: A

Mark the incorrect option a) The articles of stock such as plant and machinery, furniture and fixture are classed as “Dead stock” b) Consumable and perishable articles come under the term “Stores” c) Both the A and B d) None of these

Description : Mark the incorrect option a) The articles of stock such as plant and machinery, furniture and fixture are classed as “Dead stock” b) Consumable and perishable articles come under the term “Stores” c) Both the A and B d) None of these

Last Answer : d) None of these

Which type of splice is used to splice a lighting fixture to a branch circuit?

Description : Which type of splice is used to splice a lighting fixture to a branch circuit?

Last Answer : Fixture joint.

Explain general principles of jigs/fixture design

Description : Explain general principles of jigs/fixture design

Last Answer : 1. Before planning the design of a tool, compare the cost of production of the work with present tools with the expected cost of production, using the tool to be made. Confirm that the cost of ... nearly as possible opposite to some bearing point of the work to avoid springing. 11. Round all corners

Enlist general principle of jig and fixture design.

Description : Enlist general principle of jig and fixture design.

Last Answer : General principle of jig and fixture design. 1. The jig and fixture should be as open as possible to minimize chip or burr accumulation and to enable the operator to remove the chips easily with a ... . Inserts 9. Design for safety 10. Sighting surfaces 11. Simplicity in Design 12. Economical 

Draw the labelled sketch of turning fixture.

Description : Draw the labelled sketch of turning fixture.

Last Answer : Figure: Back plate of Turning Fixture

State at least eight principles of jigs/ fixture design

Description : State at least eight principles of jigs/ fixture design

Last Answer : The following principles should be considered for design of jigs/ fixtures 1.Rigidity: jigs/ fixtures should be sufficiently stiff/rigid to achieve required accuracy during machining. 2.Fool ... or clearance grooves should be provided for easy removal of metal chips, burrs after machining

Differentiate in between Jig and fixture.

Description : Differentiate in between Jig and fixture.

Last Answer : Difference between jig and fixture. 

What is the penalty for hiring a foreigner without permission ?

Last Answer : : A new section 165C has been added to the existing section 165B of the Income-tax Ordinance through the Finance Act , 2015 . According to the provisions of the new section added, hiring a foreign ... three months to a maximum of three years or a fine not exceeding five lakh rupees or both.

How easy or difficult would it be for you to alter your beliefs if the reward were great enough, or if achieving the desire was worth the loss of credibility that came of it?

Description : How easy or difficult would it be for you to alter your beliefs if the reward were great enough, or if achieving the desire was worth the loss of credibility that came of it?

Last Answer : answer:For one example: If you were morally against stealing and someone approached you and told you that you could get away with it, it would hurt no one, no loss would be felt by ... , or completely retain your values against it and never bat an eyelash? Psychology and Behavioral science question

Will a Snow Leopard installation be easy enough for a 15 year old?

Description : Will a Snow Leopard installation be easy enough for a 15 year old?

Last Answer : You can gail should get together for a group install. I predict great things…

Is the iPhone SDK easy enough for a person who has no experience in software developing?

Description : Is the iPhone SDK easy enough for a person who has no experience in software developing?

Last Answer : No, not at all.

‘While it is easy enough to represent a ruler through a portrait or a statue, how does one go about giving a face to a nation.” -SST 10th

Description : ‘While it is easy enough to represent a ruler through a portrait or a statue, how does one go about giving a face to a nation.” -SST 10th

Last Answer : Visualizing the Nation: (i) Artists personified the nation-portrayed nation as a female figure. (ii) Artist used the female allegory to portray ideas such as liberty, justice and the republic. (iii) ... of the German nation. She wears a crown of oak leaves, as in Germany oak stands for heroism.

What is the way to get rid of headaches ? I am 23 years old. I have been suffering from cold since I was a child. The problem of cold and cough can be seen only when it is mildly hot or cold . Headaches occur almost every day due to tension , riding a bike , poor sleep at night or not getting enough sleep. Mild forehead tingling and it gradually becomes more. But it is difficult to sleep in such a situation. It is not easy to fall asleep. I face this problem almost every day more or less like this. Seen more in the afternoon. Please someone help with the right solution. This daily pain has become unbearable.

Description : What is the way to get rid of headaches ? I am 23 years old. I have been suffering from cold since I was a child. The problem of cold and cough can be seen only when it is mildly ... this. Seen more in the afternoon. Please someone help with the right solution. This daily pain has become unbearable.

Last Answer : The problem is migraine. I have my own. The problem is a little cold. There is no prescriptive drug that will stop the flow of emotions, though their effects can be curtailed. However, it can be ... do , I am currently controlling myself from using the phone. And I am doing math for the test.

During a merger and acquisition transaction, the ability to find and use good comparable data for a valuation is relatively ____________. a) easy because each successful company within an industry uses the same ratios b) easy because public stock price fluctuation is not sufficient or erratic enough to make a difference c) difficult because book value is adjusted in small companies as FIFO is the method of choice and in public companies’ book value is static due to LIFO d) difficult because size differential, management depth, product diversity and access to lines of credit seldom match the company being valued

Description : During a merger and acquisition transaction, the ability to find and use good comparable data for a valuation is relatively ____________. a) easy because each successful company within an industry ... depth, product diversity and access to lines of credit seldom match the company being valued

Last Answer : d) difficult because size differential, management depth, product diversity and access to lines of credit seldom match the company being valued

The interference in thin films is because (a) The film reflects some light (b) The film is thin enough so that refracted ray is close to reflected ray (c) The reflected ray undergo path change of λ/2 (d) All of above

Description : The interference in thin films is because (a) The film reflects some light (b) The film is thin enough so that refracted ray is close to reflected ray (c) The reflected ray undergo path change of λ/2 (d) All of above

Last Answer : (d) All of above

Is there an easy way to put a light down on my shed without running power to it?

Description : Is there an easy way to put a light down on my shed without running power to it?

Last Answer : There are many ways that you can accomlish this. You can use a solar powered light or you can fix a cordles mount light to your shed.

What kind of a contractor do I need for a bathroom job?

Description : What kind of a contractor do I need for a bathroom job?

Last Answer : I know you don’t really use Facebook, but if you’re still a member, join your town page and ask on there. You’ll get some honest reviews and good recommendations. Last summer I did that for an electrician and hit gold.

I want to find a general contractor who can build a pedestrian concrete bridge. Where can I find some?

Description : I want to find a general contractor who can build a pedestrian concrete bridge. Where can I find some?

Last Answer : Where are you? Who did the design (Professional Engineer) ? Who is going to use the bridge, city sidewalk traffic or mall?

How hard is it to act as your own general contractor for a renovation?

Description : How hard is it to act as your own general contractor for a renovation?

Last Answer : Well. A contractor would have their own subcontractors, and could be easier to hold accountable for any issues. If it were just one trade, I'd be more likely to try to find just a guy, to do it. ... you have some different rules in Fla, than in SC (where I have been a subcontractor.. Good luck. .

What are the common problems people have when hiring and working with freelance writers?

Description : What are the common problems people have when hiring and working with freelance writers?

Last Answer : Freelance writers may be temperamental. They may not be used to meeting deadlines and producing a finished product on time. They may not be familiar with contracts and obligations. Depending on what ... non-fiction, instruction book, etc.) the writer may not work well and creatively under pressure.

Can a contractor put a lien on my house?

Description : Can a contractor put a lien on my house?

Last Answer : Yes, the work has not been completed to your satisfaction. Threaten to get an attorney, That will probably goose him to finish up. I think that he is just saber rattling. (Keep checking wit the bank on when the check clears.) Then I still would not pay the full amount until he replaces the fascia.

Is there less of an advantage to hiring family or is there a greater advantage?

Description : Is there less of an advantage to hiring family or is there a greater advantage?

Last Answer : I think that would entirely depend on the type of business, how the family interaction plays out, and of course, the type of individual involved. I have known families in business that do very ... will, or because emotional coercion was brought to bear. Those situations tend to not be successful.

How does one go about hiring a legal or financial professional from among so many potential choices?

Description : How does one go about hiring a legal or financial professional from among so many potential choices?

Last Answer : I would ask them for references. It’s a bit more work for you to check their references, but it gives you an opportunity to talk to people that have worked with them first hand.

If interviewing for a contractor job, are you going up against others?

Description : If interviewing for a contractor job, are you going up against others?

Last Answer : If Aerotek has the contract, they may or may not be offering other candidates. Be patient. It takes employers a while to decide.

Contractor costs were way off, do I still pay it?

Description : Contractor costs were way off, do I still pay it?

Last Answer : answer:Do you have an estimate or a contract? An estimate is not a promise, after all, but an educated guess. A contract, on the other hand, is more authoritative. If the contractor made you a solid ... loss on the project since it was his mistake, but that doesn't mean you have to make him suffer.

Would it be weird to contact a hiring manager through LinkedIn?

Description : Would it be weird to contact a hiring manager through LinkedIn?

Last Answer : Those people generally troll Linked-in for contacts. They won’t be at all surprised to hear from you in that way. I generally get about one or two contacts a week from head-hunters looking to pad their rolls.

Do hiring managers actually contact references?

Description : Do hiring managers actually contact references?

Last Answer : answer:Some do. Some don't. I've been a reference, and I've been contacted. I've been told by some hiring managers that they contacted my references, and I've been told by some references that ... of 30,000 might behave differently from a hiring manager in a six-person shop, just as one example.

What is the process for hiring and working with a DP for film?

Description : What is the process for hiring and working with a DP for film?

Last Answer : answer:I'm going to assume you are the/one producer of this thing. In that respect, here are some things to consider: Do you have a finished script? If not, it's hard to take you seriously. And ... (to make sure you get the shots you need), script supervisor (because, yes, there will be changes.)

Can someone please explain this law for hiring Aliens?

Description : Can someone please explain this law for hiring Aliens?

Last Answer : I would say that any hospital costs for the “alien” and for those who contracted diseases from this “alien” must be paid by the employer of the “alien”.

What do you think of asking a recruiter for a contractor position after rejected from an offer?

Description : What do you think of asking a recruiter for a contractor position after rejected from an offer?

Last Answer : What could it hurt? They will know you are very interested and the worst that could happen is they could say no.

Do you loathe the idea of hiring help?

Description : Do you loathe the idea of hiring help?

Last Answer : answer:Yes. I have tried a cleaning person (PC okay?) once or twice a week - ended up cleaning the house before she came - then working with her all morning. Not a good idea. Yard work and ... their room in a hotel before leaving. Edit: Didn't read the details responded to the question. Sorry.

What kind of government regulations are keeping businesses from hiring?

Description : What kind of government regulations are keeping businesses from hiring?

Last Answer : Obama

What can be done when someone is hired as an independent contractor, but does not receive compensation for their work for several months?

Description : What can be done when someone is hired as an independent contractor, but does not receive compensation for their work for several months?

Last Answer : I worried about the difference between being an independent contractor qualified through the elected agency versus temp employee of that agency, in regard to receiving what I am owed by the company. If I was just ... then there is an issue with what I am owed, it could be harder to get a resolution.

Do hiring policies usually forbid hiring someone who's committed a felony, ever, or just within the past x number of years?

Description : Do hiring policies usually forbid hiring someone who's committed a felony, ever, or just within the past x number of years?

Last Answer : The policies vary so much from place to place, it is impossible to say. Each company and organization is free to make their own policy.

What questions should I ask the Roofing Contractor?

Description : What questions should I ask the Roofing Contractor?

Last Answer : answer:Get three written estimates. Licensed in your state with insurance, also ask for references and check them out.

What part time jobs can I apply for that will not drug test upon hiring?

Description : What part time jobs can I apply for that will not drug test upon hiring?

Last Answer : A car wash.

Has anyone had experience with hiring a trapper to set snares for Coyotes?

Description : Has anyone had experience with hiring a trapper to set snares for Coyotes?

Last Answer : I don’t think that will solve your problem. There’s too many of them and they’re too widespread any more. Eliminating the local population will just invite other coyotes into your area. I think you’ll need to adapt to them as is.

Why isn't a person criminally charged when they pose as a licensed contractor and they are are lying and comitting fraud?

Description : Why isn't a person criminally charged when they pose as a licensed contractor and they are are lying and comitting fraud?

Last Answer : answer:How do you know he wasn't licensed? Did you ask to see the license when you hired him? That's the point of it, after all. So that you can review and verify his credentials. If ... in prosecution. But it doesn't happen automatically just because you aren't happy with the work that was done.

Are there any places in Central Florida that are hiring graphic design interns?

Description : Are there any places in Central Florida that are hiring graphic design interns?

Last Answer : answer:How have you managed to get to the end of your college career without meeting anyone that is involved in your field, or researching any related businessed in the area? I have a feeling you ... your professors - maybe they could give you a letter of recommendation and provide you with a lead?