Is it best to get a turntable with one speed, 33.3 RPM, or one with an additonal speed as well?

Is it best to get a turntable with one speed, 33.3 RPM, or one with an additonal speed as well?
by

1 Answer

Answer :

Is better to have a turn table with different speed options, you can mix music/vinyls that have different speeds.
by

Related questions

In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Description : In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Last Answer : e. 25.5 m/s

What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Description : What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Last Answer : c. 78.94 mts/sec2

Hooking up vintage receiver and turntable?

Description : Hooking up vintage receiver and turntable?

Last Answer : answer:It could be one of a few things. The OHMs on older Marantz don't match with some turntables. Also, some turntables are made specifically for the same model of receiver and will feed back on ... unplug a wire. It's really hard to say without looking at your rig. Answer by Seek's Hubby

Help with old turntable cartridge...how do these work?

Description : Help with old turntable cartridge...how do these work?

Last Answer : Could it be a spring or something which controls the tonearm? Not the cartridge at the end, but the whole arm?

Can I connect a 5.1 surround sound system to a turntable pre-amp?

Description : Can I connect a 5.1 surround sound system to a turntable pre-amp?

Last Answer : I think you’re missing a dolby 5.1 receiver/amp in between them. The pre-amp you cite does not seem to have an amp that can drive speakers.

Vintage electronics gurus: would you kindly help me troubleshoot my turntable home audio set up?

Description : Vintage electronics gurus: would you kindly help me troubleshoot my turntable home audio set up?

Last Answer : If that is an old receiver it may need to have the controls (knobs) turned briskly back and forth to loosen up any corrosion on the contacts. Don't do this with it on. At low volume if you ... . Does the record machine have a ground wire? Really important it's connected or you will get wicked hum.

What kind of turntable/record player should I buy?

Description : What kind of turntable/record player should I buy?

Last Answer : I have an Emerson' that is a record/CD/cassette/radio combo. I don't have anything to compare it to as it's the only record player I've owned aside from a really old, really huge one ... ) works well, but the CD player never worked correctly. Of course I only realized this after the warranty ended

What is the best USB turntable on the market under $200?

Description : What is the best USB turntable on the market under $200?

Last Answer : I bought an Ion TTUSB10 for $79.00 at Costco. It performs very well. Costco isn’t selling it any more, but you can get it for $100 at Amazon.

Would you consider buying a portable turntable , with all the components or rather a turntable, amp, and use my speakers I already have for my 13 year old's foray into records?s?

Description : Would you consider buying a portable turntable , with all the components or rather a turntable, amp, and use my speakers I already have for my 13 year old's foray into records?s?

Last Answer : answer:Hi, and welcome to Fluther. I'm sorry, but I wouldn't consider buying anything for your 13-year-old. I don't even know the child! But it might be a good idea for you to do, though. One ... played and saved as an .MP3 file on an attached computer (or other USB device that can save the file).

Everything old is new again? I'm listening to my old albums on the turntable, reading old books and shunning the kindle, laptop and mp3,4,5,6,7, - are you?

Description : Everything old is new again? I'm listening to my old albums on the turntable, reading old books and shunning the kindle, laptop and mp3,4,5,6,7, - are you?

Last Answer : I so get what you mean.

How do i power my turntable using the phono component of my NAD amplifer which is connected to my new marazants amplifer? the speakersare connected to the marantz amplifer?

Description : How do i power my turntable using the phono component of my NAD amplifer which is connected to my new marazants amplifer? the speakersare connected to the marantz amplifer?

Last Answer : Try pluging the stereo phono plugs into the NAD preamp, and the preamp stereo outputs into the auxillary imputs on your Marantz amp. Mind you, you must ground the phono leads, or you'll get a loud ... , = Vinyl is far superior to CD's. get a really great cartridge. it makes all the difference!!

Do I need a turntable amplifier if I have powered speakers?

Description : Do I need a turntable amplifier if I have powered speakers?

Last Answer : You may need a preamp: A turntable preamp or pre-amp is a small electronic circuit that will amplify the very small electrical signal coming out of a cartridge. It brings the cartridge signal up ... output directly into a computer sound card, that's when you must get a separate turntable preamp.

Can you recommend a nice turntable? (playing vinyl, not DJ'ing)

Description : Can you recommend a nice turntable? (playing vinyl, not DJ'ing)

Last Answer : I haven’t had a turntable for about 10+ years, but I still have all of my albums-including the woodstock album. Have you gone online?

How to turn on the sound on a turntable connected to your computor having a Vista operating system

Description : How to turn on the sound on a turntable connected to your computor having a Vista operating system

Last Answer : Need Answer

How to Repair a Microwave Turntable?

Description : How to Repair a Microwave Turntable?

Last Answer : Although microwaves are small and useful tools in the kitchen,they may have a risk of danger trying to repair. They emit largeamounts of radiation, due to the high voltage. You must be carefulwhile trying to ... in the center to see underneath. Lookin to see if there is any food stuck on the insi

How does an automatic turntable work?

Description : How does an automatic turntable work?

Last Answer : An automatic turntable will play vinyl albums with the touch of a button. The arm will swing over to begin play and return to resting after play is finished. http://www.needledoctor.com/Denon-DP-300F-Fully-Automatic-Turntable

What turntable is best for copying old records to CD?

Description : What turntable is best for copying old records to CD?

Last Answer : The TEAC GF-350 Turntable / CD-Recorder is great for transferring vinyl to CD format.

Which turntable company provides the best customer support service?

Description : Which turntable company provides the best customer support service?

Last Answer : The Sony turntables have great support and come with a three-year warranty, though the turntables are almost certain to last quite a bit longer.

Can I plug speakers directly into a turntable, or do I need a receiver?

Description : Can I plug speakers directly into a turntable, or do I need a receiver?

Last Answer : Most turn tables have speaker plugs.

Which turntable offers the best sound?

Description : Which turntable offers the best sound?

Last Answer : The Sony turntables, if you can find them, offer good sound.

Does the Sony PS LX300USB Turntable plug into a PC?

Description : Does the Sony PS LX300USB Turntable plug into a PC?

Last Answer : The Sony LX300 can connect to your computer via a USB cord.

How can I use my turntable with my laptop and alter mixes and songs?

Description : How can I use my turntable with my laptop and alter mixes and songs?

Last Answer : Rane produces a software/hardware package called "Serato Scratch Live" which will allow you to link your turntables directly to a laptop and manipulate MP3's or other audio files as if they were real ... dollars on vinyl, as well as eliminate the need to carry huge boxes of records with you.

Does this microwave have a turntable?

Description : Does this microwave have a turntable?

Last Answer : Yes, this Jenn Air microwave oven does have a turntable for you to place food on.

How many revolutions will a turntable that rotates through an angle of 3 over 2 pi in one second make in 60 seconds?

Description : How many revolutions will a turntable that rotates through an angle of 3 over 2 pi in one second make in 60 seconds?

Last Answer : I guess you mean 3 pi over 2, ie 3Ï€/2 though it may have been given to you as (3/2)Ï€ To solve this, find the total angle turned in 60 seconds and divide by the angle in a whole ... radians = 90Ï€/2Ï€ revolutions = 45 revolutions (45 rpm - the figure calculated - was the standard for a single).

A small mass is placed on a turntable that is rotating at 45 r.p.m. The acceleration of the mass is (a) Greater the closer the mass is to the centre of the turntable (b) Greater the farther the mass is from the centre (c) Independent of the location of the mass (d) Zero

Description : A small mass is placed on a turntable that is rotating at 45 r.p.m. The acceleration of the mass is (a) Greater the closer the mass is to the centre of the turntable (b) Greater the farther the mass is from the centre (c) Independent of the location of the mass (d) Zero

Last Answer : Ans:(b)

A 3 phase 50 Hz induction motor has full load speed of 970 rpm. Calculate no of poles and slip frequency.

Description : A 3 phase 50 Hz induction motor has full load speed of 970 rpm. Calculate no of poles and slip frequency.

Last Answer : The number of poles in an induction motor can be calculated using the following formula: No. of poles = (120 * frequency) / speed In this case, the number of poles would be calculated as follows: No. of poles = ( ... ) - 50 Hz = 8.08 Hz So the motor has 6 poles and a slip frequency of 8.08 Hz.

A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Description : A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Last Answer : c. 502 rad/min2

determine the speed of rotation of a 20 tooth gear when it is driven by a 40 tooth gear and rotating at 10 rpm?

Description : determine the speed of rotation of a 20 tooth gear when it is driven by a 40 tooth gear and rotating at 10 rpm?

Last Answer : i am the one that asked i dont know the answer

A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke engine (b) Be half that of the four stroke engine (c) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Description : A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke ... ) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Last Answer : Ans :c

Piston speed is equal to a. stroke x rpm b. (stroke x rpm) / 2 c. 2 x stroke x rpm d. 4 x stroke x rpm

Description : Piston speed is equal to a. stroke x rpm b. (stroke x rpm) / 2 c. 2 x stroke x rpm d. 4 x stroke x rpm

Last Answer : ANSWER c. 2 x stroke x rpm

A four pole turbogenerator is used in conjunction with a 160 pole propulsion motor. If the generator is turning at 3,200 RPM, what is the current speed of the propeller? A. 40 RPM B. 60 RPM C. 80 RPM D. 100 RPM

Description : A four pole turbogenerator is used in conjunction with a 160 pole propulsion motor. If the generator is turning at 3,200 RPM, what is the current speed of the propeller? A. 40 RPM B. 60 RPM C. 80 RPM D. 100 RPM

Last Answer : Answer: C

An AC generator produces 60 Hz at 1800 RPM. If the generator speed is increased to 1830 RPM, the cycles will _____________. A. remain at 60 Hz B. increase to 61 Hz C. decrease to 59 Hz D. increase to 63 Hz

Description : An AC generator produces 60 Hz at 1800 RPM. If the generator speed is increased to 1830 RPM, the cycles will _____________. A. remain at 60 Hz B. increase to 61 Hz C. decrease to 59 Hz D. increase to 63 Hz

Last Answer : Answer: B

The most practical method of controlling the RPM of a step-speed AC motor is to _____________. A. change input voltage B. vary the number of poles C. vary power factor D. change the number of brushes

Description : The most practical method of controlling the RPM of a step-speed AC motor is to _____________. A. change input voltage B. vary the number of poles C. vary power factor D. change the number of brushes

Last Answer : Answer: B

A four-pole 60-hertz induction motor has a synchronous speed of 1800 RPM and a slip of 4 percent at full load. What will be its full load speed? A. 1728.0 RPM B. 1730.7 RPM C. 1800.0 RPM D. 1872.0 RPM

Description : A four-pole 60-hertz induction motor has a synchronous speed of 1800 RPM and a slip of 4 percent at full load. What will be its full load speed? A. 1728.0 RPM B. 1730.7 RPM C. 1800.0 RPM D. 1872.0 RPM

Last Answer : Answer: A

A four-pole, 60 cycle, squirrel-cage motor has a full load speed of 1725 RPM. What will be the percent of slip at full load? A. 4.16 B. 4.34 C. 95.66 D. 95.84

Description : A four-pole, 60 cycle, squirrel-cage motor has a full load speed of 1725 RPM. What will be the percent of slip at full load? A. 4.16 B. 4.34 C. 95.66 D. 95.84

Last Answer : Answer: A

If the synchronous speed of a 12 pole, polyphase, induction motor operating at 60 Hz were 600 RPM, how many poles will be required in a similar motor operating at the same frequency but having a synchronous speed of 900 RPM? A. 4 B. 6 C. 8 D. 18

Description : If the synchronous speed of a 12 pole, polyphase, induction motor operating at 60 Hz were 600 RPM, how many poles will be required in a similar motor operating at the same frequency but having a synchronous speed of 900 RPM? A. 4 B. 6 C. 8 D. 18

Last Answer : Answer: C

The prime mover of an AC two pole main propulsion generator drives the generator at 3600 RPM. If the main propulsion motor has 80 poles, what will be the propeller speed? A. 45 RPM B. 80 RPM C. 90 RPM D. 180 RPM

Description : The prime mover of an AC two pole main propulsion generator drives the generator at 3600 RPM. If the main propulsion motor has 80 poles, what will be the propeller speed? A. 45 RPM B. 80 RPM C. 90 RPM D. 180 RPM

Last Answer : Answer: C

What is the rotor speed of a four pole, 60 cycle, induction motor operating at full load with 3% slip? A. 270 RPM B. 540 RPM C. 873 RPM D. 1746 RPM

Description : What is the rotor speed of a four pole, 60 cycle, induction motor operating at full load with 3% slip? A. 270 RPM B. 540 RPM C. 873 RPM D. 1746 RPM

Last Answer : Answer: D

The speed of a multi-speed, squirrel-cage, induction motor operating in a fixed frequency system can be changed by _____________. A. reconnecting stator windings for different numbers of poles B. changing the RPM of the rotor flux C. changing the phase sequence of the applied voltage D. reconnecting the stator so that no poles have the same polarity

Description : The speed of a multi-speed, squirrel-cage, induction motor operating in a fixed frequency system can be changed by _____________. A. reconnecting stator windings for different numbers of poles B. ... sequence of the applied voltage D. reconnecting the stator so that no poles have the same polarity

Last Answer : Answer: A

As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay #6 C. the RPM 'function generator' and 'thrust levers' have no control D. the 'E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Description : As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay ... E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Last Answer : Answer: C

The synchronous speed of an induction motor is the ________. A. speed at which the rotor turns B. speed of the rotating field C. frequency of the rotor current D. slip in per cent of rotor RPM

Description : The synchronous speed of an induction motor is the ________. A. speed at which the rotor turns B. speed of the rotating field C. frequency of the rotor current D. slip in per cent of rotor RPM

Last Answer : Answer: B

The speed of a rotary drum vacuum filter may be about __________ rpm. (A) 1 (B) 50 (C) 100 (D) 500

Description : The speed of a rotary drum vacuum filter may be about __________ rpm. (A) 1 (B) 50 (C) 100 (D) 500

Last Answer : (A) 1

rpm of a trommel at critical speed is given by (where, D = Diameter of trommel in ft) (A) 76.65/D (B) 76.65/√D (C) 76.65/D2 (D) 76.75 √D

Description : rpm of a trommel at critical speed is given by (where, D = Diameter of trommel in ft) (A) 76.65/D (B) 76.65/√D (C) 76.65/D2 (D) 76.75 √D

Last Answer : (B) 76.65/√D

A propeller agitator (A) Produces mainly axial flow (B) Is used for mixing high viscosity pastes (C) Runs at very slow speed (2 rpm) (D) All (A), (B) and (C)

Description : A propeller agitator (A) Produces mainly axial flow (B) Is used for mixing high viscosity pastes (C) Runs at very slow speed (2 rpm) (D) All (A), (B) and (C)

Last Answer : (A) Produces mainly axial flow

A flywheel of moment of inertia 9.8kgm 2 fluctuates by 30 rpm for a fluctuation in energy of 1936 joules. The means speed of flywheel is (in rpm) 1. 600 2. 900 3. 968 4. 2940

Description : A flywheel of moment of inertia 9.8kgm 2 fluctuates by 30 rpm for a fluctuation in energy of 1936 joules. The means speed of flywheel is (in rpm) 1. 600 2. 900 3. 968 4. 2940

Last Answer : 1. 600

The coefficient of fluctuation of speed, when the maximum and minimum speeds are 300rpm and 290 rpm (A) 0.034 (B) 0.017 (C) 0.008 (D) 0/004

Description : The coefficient of fluctuation of speed, when the maximum and minimum speeds are 300rpm and 290 rpm (A) 0.034 (B) 0.017 (C) 0.008 (D) 0/004

Last Answer : (A) 0.034

Different types of bearings are designed to operate at different operating speeds. Speed is specified as the maximum (a) rpm (b) metres/second (c) metres/minute (d) metres/hour

Description : Different types of bearings are designed to operate at different operating speeds. Speed is specified as the maximum (a) rpm (b) metres/second (c) metres/minute (d) metres/hour

Last Answer : (b) metres/second

Rotor shaft of a large electric motor supported between short bearings at both ends shows a deflection of 1.8 mm in middle of motor. Assuming rotor to be perfectly balanced and supported at knife edges at both ends, likely critical speed (rpm) of shaft isA 350 B 4430 C 705 D 2810

Description : Rotor shaft of a large electric motor supported between short bearings at both ends shows a deflection of 1.8 mm in middle of motor. Assuming rotor to be perfectly balanced and supported at knife edges at both ends, likely critical speed (rpm) of shaft isA 350 B 4430 C 705 D 2810

Last Answer : C 705

When the speed of a turbine is 6000 rpm, it takes _____ seconds for the turbine to complete one revolution. a)0.1 sec b)0.0001sec c)10sec d)0.001sec

Description : When the speed of a turbine is 6000 rpm, it takes _____ seconds for the turbine to complete one revolution. a)0.1 sec b)0.0001sec c)10sec d)0.001sec

Last Answer : c)10sec

Which is the correct relationship for a centrifugal pump? (Where, D = Impeller diameter, inches H = Head developed, ft of liquid pumped N = Speed of pump, rpm) (A) D = 1840 H0.5 /N (B) D = 1840 N/H0.5 (C) H = 1840 D0.5 /N (D) D = 1840 H/N

Description : Which is the correct relationship for a centrifugal pump? (Where, D = Impeller diameter, inches H = Head developed, ft of liquid pumped N = Speed of pump, rpm) (A) D = 1840 H0.5 /N (B) D = 1840 N/H0.5 (C) H = 1840 D0.5 /N (D) D = 1840 H/N

Last Answer : (A) D = 1840 H0.5 /N