shurtron r.v. power converter, alarm sounds when plugged into 110, unless there is a 12v load. why is alarm sounding with this use combination?

1 Answer

Answer :

It may be made for something other than 110 or you are over loading it.

Related questions

Description : One of the ports on my "5.1" Surround Sound console makes whatever speaker is plugged into it weak sounding. Anything i can do to fix it myself?

Last Answer : If you don’t have any warranty left on it, you could hack it open and take a look, and if the problem is obvious, you could maybe try to fix it.

Description : My hp cyhromebook wont stay on unless plugged in. Bad battery?

Last Answer : Sulfation can happen when battery is not fully charged and remains discharged

Description : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is (A) sinusoidal current (B) constant dc current (C) continuous rectangular pulses (D) alternating rectangular pulses

Last Answer : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is alternating rectangular pulses

Description : When I put a new battery in my "Coleman Sheltra" smoke detector. The alarm doesn't stop sounding. What should I do?

Last Answer : Chances are your smoke detector is faulty and needs to be replaced . They are very sensitive and break very easy. But most likely your detector got damaged when you changed the batterys.

Description : Where can I get an outlet converter for my trip to Thailand? sorry for sounding like such a girl but i don't know where to find these things.

Last Answer : ebay? I know the Apple store has them but they were kind of expensive.

Description : When the nurse auscultates chest sounds that are harsh and cracking, sounding like two pieces of leather being rubbed together, she records her finding as a) pleural friction rub. A ... wheezes are continuous, musical, high-pitched, whistle-like sounds heard during inspiration and expiration.

Last Answer : a) pleural friction rub. A pleural friction rub is heard secondary to inflammation and loss of lubricating pleural fluid.

Description : I set the alarm for 6.30 in the morning ______ I wouldn't miss the train. (1) in case (2) unless (3) until (4) so that

Last Answer : (4) so that

Description : A `100 V` voltmeter of internal resistance `20 k Omega` in series with a high resistance `R` is connected to a `110 V` line. The voltmeter reads `5 V`

Last Answer : A `100 V` voltmeter of internal resistance `20 k Omega` in series with a high resistance `R` is ... B. `315kOmega` C. `420kOmega` D. `440kOmega`

Description : what kind of voltage converter do I Need To Run A Clothes Dryer When I Just Have Standard 110 voltage In My Home ?

Last Answer : A step down converter will convert the voltage from 220/230 volts to 110 volts. Converters are labeled to display their capabilities, such as "110V to 220V Converter". Read the instruction manual for ... a step down converter after discussing the plug type and voltage found in the owner's manual.

Description : The alarm system for an engine order telegraph uses small selsyn motors attached to the indicators. The alarm sounds when the rotors are _____________. A. in synchronous position, no current is flowing, ... and the relays are open D. not synchronized, current is flowing, and the relays are closed

Last Answer : Answer: D

Description : As shown in the illustration, what happens when 'A' is closed, 'B' is in position '2' and component 'E2' burns out? EL-0058 A. 'H' energizes and 'D' makes contact. B. 'F' goes out allowing 'G' to disconnect. C. 'G' sounds an alarm and 'F' illuminates. D. 'C' opens causing 'A' to also open.

Last Answer : Answer: C

Description : A Hybrid Vehicle equipped with push button start will enter the power ON mode but will not enter the ready to drive mode .No diagnostic trouble code are stored this could cause by a) The high voltage safety ... removed b) A failed brake on/off switch c) An empty fuel tank d) A disconnect 12v battery

Last Answer : b) A failed brake on/off switch

Description : A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Last Answer : ANSWER: Z -- 5 V/R

Description : A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms value of the current flowing through each thyristor of the converter is

Last Answer : Please show the solution for this question

Last Answer : A fridge uses 220 watts from 110 V power source. The Fridge then draws a current from the source equal to 2 amps.

Description : What would cause a strange noise in a car, above 30 mph that sounds like a combination rattle and buzz?

Last Answer : Get it into a shop for brake check, maybe the pads are wearing down to the audible sound strip.

Description : Can you plug in pest control into a 12V battery?

Last Answer : In order to use the "plug in" pest control with a 12V battery, the device would have to have power requirements less than or equal to that which a 12V battery can provide. The pest control would also need an adapter to use the 12V battery.

Description : Why is it that when my cell phone is plugged into the charger, after being dead, it still doesn't have power for a while?

Last Answer : answer:If you're running the battery down completely, you'll likely need to wait until the charger can charge the battery enough so that it will boot up. You might want to carry an extra battery with you ... the phone. You can get this whole set for $25. It is a charger and 2 extra batteries.

Description : How to wire a 12V remote switch?

Last Answer : So if I'm following you right, (ignoring the switch for the moment) you shoud have a pair of wires leading from the power supply, and another pair of wires going out to the equipment or device that you ... to operate the relay. P.S. Forgive me for asking, but are there batteries in the remote? :)

Description : Is there a 12v car/cigarette outlet adapter for the portable Bose Sounddock?

Last Answer : Just buy an inverter with a plug socket on instead! That way you can use most mains powered products via a cigarette lighter socket which is far more useful :-)

Description : Witch fuse control my 12v cigarette lighter on my 93 buick park Avenue?

Last Answer : 21.08–21.23 mm

Description : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then connected across an inductor of inductance `0.6mH` What is th

Last Answer : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then ... potential difference across the capacitor is `6.0V` ?

Description : got a small solar panel model:GM684 sp-60-12v whats it used for?

Last Answer : It can run a small appliance, like a clock or radio or recharge flashlights.

Description : 12v Motor?

Last Answer : form_title= 12v Motor form_header= Buy a new 12v motor with help from the pros. What battery do you use to power your motor?*= _ [50] When did you last change your oil? *= _ [50] Has your motor quit recently?*= () Yes () No

Description : Where can I buy a 12v battery charger?

Last Answer : You can ask the store for extra from where you bought the toy Jeep. There are websites online selling all kind of stuff like www.Amazon.com or www.ebay.com

Description : Will any 12v battery charge work?

Last Answer : According to the magnitude of said current will be the time needed for charging. For there to be a current flow to the battery, the charger must provide a voltage (voltage) higher than the battery, this is ... can not charge a 12V battery from another. Or at least, could not, as we shall see later.

Description : What is the best 12V rechargeable battery?

Last Answer : Milwaukee tools have some of the best batteries around, but it can be tricky to find just the battery without purchasing the power tool as well. Nuon and Rayovac have good consumer reviews.

Description : Where can I find a 23a 12v battery?

Last Answer : I suggest an electronics store such as Best Buy or HHGREGG, but if you can find one in your area, I strongly suggest looking into a Batteries Plus store.

Description : What is the 23a 12v battery used for?

Last Answer : 12 volt battery chargers, gel cell and solar, come with a money back guarantee and will not void or affect manufacturers warranties. They are used for lighting.

Description : Where can I get a replacement motor for a 12v air compressor?

Last Answer : That depends on the manufacturer. Check the unit for model numbers and check your owners manual for contact information. The manufacturer may have a website listed in the owners manual.

Description : Find the energy stored by the capacitor 3F having a potential of 12V across it. a) 432 b) 108 c) 216 d) 54

Last Answer : c) 216

Description : The MHEV system consists of which volt? a) 12V b) 24V c) 48V d) none of the

Last Answer : c) 48V

Description : Which voltage is likely to be available from the battery of an electric vehicle also known as Mild hybrid? a) 12V b) 24V c) 300V d) 100V

Last Answer : c) 300V

Description : What is a typical ARC voltage setting when welding with the TIG (GTAW) process? a) 18-20V b) 24-26V c) 10-12V d) 70-90V

Last Answer : c) 10-12V

Description : In the following figure, the terminal potential is a. zero b. 2V c. 12V d. 36V

Last Answer : a. zero

Description : does a laptop need battery power even if plugged in?

Last Answer : Need Answer

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

Description : need repairs on a ESB 110 v bed in the DSM area. Who does this.?

Last Answer : the Sears repair man can, Des Moines, IA - (515) 287-0624

Description : The voltage of the single phase supply to residential consumers is (a) 110 V (b) 210 V (c) 230 V (d) 400 V

Last Answer : (c) 230 V

Description : Why is 440 V used for motors and 110/220 V used for lighting?

Last Answer : Motor load currents are large. Motors are 3-phase loads. A higher 440V voltage means lesser current for the same power and hence losses and size of cable wires is lower. Lighting is single phase ... small, hence lower voltage means less insulation in the cable wires. Ask E/O for more information

Description : The voltage of the single phase supply to residential consumers is (a) 110 V (b) 210 V (c) 230 V (d) 400 V

Last Answer : (c) 230 V

Description : Infusion of potassium chloride is indicated in digitalis toxicity when the manifestation(s) is/are: A. Vomiting, hyperapnoea and visual disturbance B. Pulsus bigeminus with heart rate 110/min ... accidentally ingested 10 digoxin tablets D. 2:1 A-V block with occasional ventricular extrasystoles

Last Answer : B. Pulsus bigeminus with heart rate 110/min in a patient on maintenance digoxin therapy

Description : The primary winding of a 220/6 V, 50 Hz transformer is energised from 110 V, 60 Hz supply. The secondary output voltage will be (A) 3.6 V. (B) 2.5 V. (C) 3.0 V. (D) 6.0 V.

Last Answer : (C) 3.0 V.

Description : If a 220 V heater is used on 110 V supply, the heat produced by it will be nearly (a) one half (b) twice (c) one-fourth (d) four times 

Last Answer : If a 220 V heater is used on a 110 V supply, the heat produced by it will be significantly less than it would be if it were used on a 220 V supply. This is because the heater is designed to operate ... the heater, but it will be significantly less than it would be if it were used on a 220 V supply.

Description : The primary winding of a 220/6 V, 50 Hz transformer is energised from 110 V, 60 Hz supply. The secondary output voltage will be (A) 3.6 V. (B) 2.5 V. (C) 3.0 V. (D) 6.0 V.

Last Answer : The primary winding of a 220/6 V, 50 Hz transformer is energised from 110 V, 60 Hz supply. The secondary output voltage will be 3.0 V.