What is a typical ARC voltage setting when welding with the TIG (GTAW) process? a) 18-20V b) 24-26V c) 10-12V d) 70-90V

What is a typical ARC voltage setting when welding with the TIG (GTAW) process?
a) 18-20V b) 24-26V c) 10-12V d) 70-90V
by

1 Answer

Answer :

c) 10-12V
by

Related questions

What is the mode of metal transfer for the TIG (GTAW) welding process? a) Spray Transfer b) Globular Transfer c) Dip Transfer d) None of the above

Description : What is the mode of metal transfer for the TIG (GTAW) welding process? a) Spray Transfer b) Globular Transfer c) Dip Transfer d) None of the above

Last Answer : d) None of the above

Explain TIG (GTAW) welding process with neat sketch.

Description : Explain TIG (GTAW) welding process with neat sketch.

Last Answer : Tungsten Inert Gas Arc Welding (TIG, GTAW): It is a welding process, in which heat is generated by an electric arc struck between a nonconsumable tungsten electrode and the work piece. The weld pool is ... produces a high quality weld of most of metals. Flux is not used in the process.  

What is the maximum OCV allowable to initiate an arc when using A. C current? a) 1000V b) 10V c) 90V d) 900V

Description : What is the maximum OCV allowable to initiate an arc when using A. C current? a) 1000V b) 10V c) 90V d) 900V

Last Answer : c) 90V

A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC+ve polarity, and a ROL:of 180mm per min. What would be the arc energy? a) Insufficient information given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Last Answer : d) 2.0 kJ/mm

TIG welding, thoriated tungsten electrodes are used, because it (A) Has higher current carrying capacity (B) Has better electron emissivity (C) Is stronger than ordinary tungsten (D) Is easy to prepare

Description : TIG welding, thoriated tungsten electrodes are used, because it (A) Has higher current carrying capacity (B) Has better electron emissivity (C) Is stronger than ordinary tungsten (D) Is easy to prepare

Last Answer : Option B

State the applications of TIG welding.

Description : State the applications of TIG welding.

Last Answer : The applications of TIG welding are as follows: 1. Mostly used to weld aluminum and aluminum alloys. 2. It is used to weld stainless steel, carbon base alloy, copper base alloy, nickel base alloy etc. 3. It is used to welding dissimilar metals. 4. It is mostly used in aerospace industries.

Why is the OCV capped at voltage setting? a) To save electricity b) To prevent exploding of the consumable c) Allow smooth transition into welding voltage range d) To reduce the risk of fatality

Description : Why is the OCV capped at voltage setting? a) To save electricity b) To prevent exploding of the consumable c) Allow smooth transition into welding voltage range d) To reduce the risk of fatality

Last Answer : c) Allow smooth transition into welding voltage range

When MMA welding what will be the effect on the weld f the power source was changed from AC to DC-ve? a) None b) Higher deposition rate c) It would slightly increase the depth of penetration d) The arc would become unstable

Description : When MMA welding what will be the effect on the weld f the power source was changed from AC to DC-ve? a) None b) Higher deposition rate c) It would slightly increase the depth of penetration d) The arc would become unstable

Last Answer : b) Higher deposition rate

The required DC voltage for arc welding is- (1) 6 to 9 V (2) 50 to 60 V (3) 200 to 250 V (4) 90 to 100 V

Description : The required DC voltage for arc welding is- (1) 6 to 9 V (2) 50 to 60 V (3) 200 to 250 V (4) 90 to 100 V

Last Answer : (3) 200 to 250 V

Which of the following mainly decides the current to be employed is arc welding? (A) Electrode size (B) Plate thickness (C) Voltage across the arc (D) Welded portion length

Description : Which of the following mainly decides the current to be employed is arc welding? (A) Electrode size (B) Plate thickness (C) Voltage across the arc (D) Welded portion length

Last Answer : (A) Electrode size

a) For a transmission line, Find SWR and reflection coefficient R if, i. There is no reflected voltage. ii. Reflected voltage and incident voltage is equal. iii. If reflected voltage=20V and incident voltage=10V. iv. If reflected voltage=10V and incident voltage =20V.

Description : a) For a transmission line, Find SWR and reflection coefficient R if, i. There is no reflected voltage. ii. Reflected voltage and incident voltage is equal. iii. If reflected voltage=20V and incident voltage=10V. iv. If reflected voltage=10V and incident voltage =20V.

Last Answer : reflection coefficient R=Vr/Vi i. There is no reflected voltage. i.e,Vr=0 R=0 SWR= 1+R/1-R=1 ii. Reflected voltage and incident voltage is equal. Vr=Vi; R=1 SWR= 1+R/1-R=1+1/1-1=infinity iii. If reflected ... and incident voltage =20V. Vr=10 and Vi=20 R=10/20=0.5 SWR= 1+R/1-R=1+.5/1-.5=3 

If the no load voltage of a certain generator is 220V and the rated load voltage is 200V, then the voltage regulation is: a. 1% b. 10% c. 20V d. 9%

Description : If the no load voltage of a certain generator is 220V and the rated load voltage is 200V, then the voltage regulation is: a. 1% b. 10% c. 20V d. 9%

Last Answer : If the no load voltage of a certain generator is 220V and the rated load voltage is 200V, then the voltage regulation is: a. 1% b. 10% c. 20V d. 9%

List common equipments used for arc welding process.

Description : List common equipments used for arc welding process.

Last Answer : 1. A.C. or D.C. machine 2. Electrode (bare or coated) 3. Electrode Holder 4. Cables and its connectors 5. Chipping Hammer 6. Earthing Clamps 7. Wire-brush 8. Helmet 9. Safety Goggles 10. Hand Gloves 11. Apron Sleeves etc.

What does the code 26V-11TX4D mean on a synchro nameplate?

Description : What does the code 26V-11TX4D mean on a synchro nameplate?

Last Answer : It is the third modification of a 26-volt 400-hertz (torque) synchro transmitter whose body diameter is between 1.01 and 1.10 inches

A Hybrid Vehicle equipped with push button start will enter the power ON mode but will not enter the ready to drive mode .No diagnostic trouble code are stored this could cause by a) The high voltage safety plug is removed b) A failed brake on/off switch c) An empty fuel tank d) A disconnect 12v battery

Description : A Hybrid Vehicle equipped with push button start will enter the power ON mode but will not enter the ready to drive mode .No diagnostic trouble code are stored this could cause by a) The high voltage safety ... removed b) A failed brake on/off switch c) An empty fuel tank d) A disconnect 12v battery

Last Answer : b) A failed brake on/off switch

Which voltage is likely to be available from the battery of an electric vehicle also known as Mild hybrid? a) 12V b) 24V c) 300V d) 100V

Description : Which voltage is likely to be available from the battery of an electric vehicle also known as Mild hybrid? a) 12V b) 24V c) 300V d) 100V

Last Answer : c) 300V

Given the following data pairs (x, y), find the regression equation. (1, 1.24), (2, 5.23), (3, 7.24), (4, 7.60), (5, 9.97), (6, 14.31), (7, 13.99), (8, 14.88), (9, 18.04), (10, 20.70) a. y = 0.490 x - 0.053 b. y = 2.04 x c. y = 1.98 x + 0.436 d. y = 0.49 x

Description : Given the following data pairs (x, y), find the regression equation. (1, 1.24), (2, 5.23), (3, 7.24), (4, 7.60), (5, 9.97), (6, 14.31), (7, 13.99), (8, 14.88), (9, 18.04), (10, 20.70) a. y = 0.490 x - 0.053 b. y = 2.04 x c. y = 1.98 x + 0.436 d. y = 0.49 x

Last Answer : c. y = 1.98 x + 0.436

The “in-principle” approval for setting up „small finance banks‟ granted by RBI will be valid for ______ A. 12 Months B. 24 Months C. 10 Months D. 18 Months E. None of the Above.

Description : The “in-principle” approval for setting up „small finance banks‟ granted by RBI will be valid for ______ A. 12 Months B. 24 Months C. 10 Months D. 18 Months E. None of the Above.

Last Answer : D. 18 Months Explanation: The ―in-principle‖ approval granted will be valid for 18 months to enable the applicants to comply with the requirements under the Guidelines and fulfil other conditions as may be stipulated by the RBI.

Argon is used in arc welding because

Description : Argon is used in arc welding because

Last Answer : Argon is used in arc welding because A. low reactivity with metal B. ability to lower the ... of metal C. flammability D. high calorific value

What type of arc welding equipment is necessary when participating in arc welding?

Description : What type of arc welding equipment is necessary when participating in arc welding?

Last Answer : The most important equipment you can have is your safety equipment, your gloves, visor and heavy-duty clothing. You have to have some sort of a power source to generate the electricity necessary for arc welding, so I'd say a power source is your most important arc welding equipment.

In arc welding, Argon is used because of its - (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Description : In arc welding, Argon is used because of its - (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Last Answer : (1) Low reactivity with metal Explanation: In arc welding, Argon is used as a shielding gas because it is chemically inert and forms no compounds. At the high temperatures that welding requires, the ... to brittle welds and instability in the welding arc. So,argon and other inert gases are sprayed.

Projection welding is (i) Electric arc welding (ii) Gas welding (iii)Spot welding (iv) None

Description : Projection welding is (i) Electric arc welding (ii) Gas welding (iii)Spot welding (iv) None

Last Answer : (iv) None

Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Description : Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Last Answer : b) Electric resistance welding

Among gas and electric arc welding, which has the higher rate of heating? a) Gas welding b) Electric arc welding c) Gas welding and electric arc welding have equal rate of heating d) Cannot be determined

Description : Among gas and electric arc welding, which has the higher rate of heating? a) Gas welding b) Electric arc welding c) Gas welding and electric arc welding have equal rate of heating d) Cannot be determined

Last Answer : b) Electric arc welding

Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Description : Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Last Answer : a) Thermit welding

The electric arc welding is a type of ............. welding. (a) forge (b) fusion

Description : The electric arc welding is a type of ............. welding. (a) forge (b) fusion

Last Answer : b) fusion

Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Description : Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Last Answer : (B) Arc

Projection welding & stud welding is categorised as the __________ welding. (A) Pressure (B) Thermit (C) Resistance (D) Arc

Description : Projection welding & stud welding is categorised as the __________ welding. (A) Pressure (B) Thermit (C) Resistance (D) Arc

Last Answer : C) Resistance

Coating provided on the electrodes used in the arc welding is not expected to (A) Add alloying elements (B) Prevent electrode from contamination (C) Stabilise the arc (D) Provide protective atmosphere to weld

Description : Coating provided on the electrodes used in the arc welding is not expected to (A) Add alloying elements (B) Prevent electrode from contamination (C) Stabilise the arc (D) Provide protective atmosphere to weld

Last Answer : (B) Prevent electrode from contamination

Cold cracking in the heat affected zone of a high strength steel weld can take place because of the (A) Retained austenite (B) Martensite formation (C) Relatively high sulphur content in the base metal (D) Sufficient hydrogen present in the welding arc

Description : Cold cracking in the heat affected zone of a high strength steel weld can take place because of the (A) Retained austenite (B) Martensite formation (C) Relatively high sulphur content in the base metal (D) Sufficient hydrogen present in the welding arc

Last Answer : (B) Martensite formation

Stainless steel is welded using (A) Oxy-acetylene flame (B) Oxy-hydrogen flame (C) Arc welding (D) Inert gas arc welding

Description : Stainless steel is welded using (A) Oxy-acetylene flame (B) Oxy-hydrogen flame (C) Arc welding (D) Inert gas arc welding

Last Answer : (D) Inert gas arc welding

Explain the shielded metal arc welding (SMAW) processes with neat sketch. State its two advantages and disadvantages.

Description : Explain the shielded metal arc welding (SMAW) processes with neat sketch. State its two advantages and disadvantages.

Last Answer : Working  : Shielded metal arc welding uses a metallic consumable electrode of a proper composition for generating arc between itself and the parent work piece. The molten electrode metal fills the weld ... . 2. Weld may contain slag inclusions 3. Fumes make difficult the process control.

Describe the working principle of Arc Welding.

Description : Describe the working principle of Arc Welding.

Last Answer : Arc welding is the most extensively employed method of joining metal parts. Here the source of heat is an electric arc. The arc column is generated between an anode which is the positive pole of D.C. ... also melted and is transferred in to the metal in the form of globules of molten metal.  

Compare resistance welding and arc welding.

Description : Compare resistance welding and arc welding. 

Last Answer : Sr. No Resistance Welding Arc Welding 1 It is plastic welding It is fusion welding. 2 Arc is produced by heat due to resistance of flow of current by work and by application ... 8 Less skilled operator can do the job. More skilled operator is required to the job

Draw a schematic of a set up of shielded metal arc welding.

Description : Draw a schematic of a set up of shielded metal arc welding. 

Last Answer : Fig. Shielded metal arc welding set-up

In arc welding, Argon is used because of its (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Description : In arc welding, Argon is used because of its (1) Low reactivity with metal (2) Ability to lower the melting point of the metal (3) High flammability (4) High calorific value

Last Answer :  Low reactivity with metal

Compare between Resistance welding and Arc welding on any six points.

Description : Compare between Resistance welding and Arc welding on any six points.

Last Answer : Sr.No Parameters Resistance Welding Arc Welding 1 Type of welding Plastic/Pressure/Non-fusion welding Fusion/Non pressure welding 2 Principle of heat developed Heat ... It is suitable for mass production It is suitable for heavy job, maintenance and repair work

The commonly used gases in tungsten arc welding are

Description : The commonly used gases in tungsten arc welding are 1.Hydrogen and oxygen 2.Hydrogen and organ 3.Hydrogen and helium 4.Helium and argon

Last Answer : The commonly used gases in tungsten arc welding are Helium and argon

For arc welding current range is usually

Description : For arc welding current range is usually  (1) 10 to 15 A (2) 30 to 40 A (3) 50 to 100 A (4) 100 to 350 A

Last Answer : For arc welding current range is usually 100 to 350 A

Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :

Description : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  (C) Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

Last Answer : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  ... Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

The supply for arc welding is :

Description : The supply for arc welding is : 

Last Answer : The supply for arc welding is : Low voltage, high current ac or dc voltage

Arc welding uses following electric supply

Description : Arc welding uses following electric supply (A) ac (B) dc (C) both ac and dc (D) spiral waveform 

Last Answer : both ac and dc

Which of the following generators is used for DC arc welding application ?

Description :  Which of the following generators is used for DC arc welding application ? (A) Series generator (B) Shunt generator (C) Differential compound generator (D) Over -compound generator

Last Answer : A

The type of dc generator used for arc welding purposes is a

Last Answer : The type of dc generator used for arc welding purposes is a Differentially compound generator.

Arc blow is a welding defect which is encountered in _________.

Last Answer : Arc blow is a welding defect which is encountered in arc welding using a.c. current.

In a bag there arc coins of 25 paise and 10 paise in the ratio of 6 : 17. If the bag contains Rs. 16 then the number of 10-paise coins is a) 30 b) 40 c) 70 d) 85 e) 65

Description : In a bag there arc coins of 25 paise and 10 paise in the ratio of 6 : 17. If the bag contains Rs. 16 then the number of 10-paise coins is a) 30 b) 40 c) 70 d) 85 e) 65

Last Answer : d) 85

The welders have increased the voltage on the SAW welding set, what would be the effect on the weld appearance? a) No effect b) The weld width would be narrower c) The penetration will be increased d) The weld width would be wider

Description : The welders have increased the voltage on the SAW welding set, what would be the effect on the weld appearance? a) No effect b) The weld width would be narrower c) The penetration will be increased d) The weld width would be wider

Last Answer : d) The weld width would be wider

Some amount of "20V" `H_(2)O_(2)` is mixed with excess of acidified solution of Kl. The iodine so liberated required 200 mL of 0.1 N `Na_(2)S_(2)O_(3)

Description : Some amount of "20V" `H_(2)O_(2)` is mixed with excess of acidified solution of Kl. The iodine so liberated required 200 mL of 0.1 N `Na_(2)S_(2)O_(3)

Last Answer : Some amount of "20V" `H_(2)O_(2)` is mixed with excess of acidified solution of Kl. The iodine so liberated ... 56 mL B. 112 mL C. 168 mL D. 224 mL