How many 300mm circles in a sq metre?

How many 300mm circles in a sq metre?
by

1 Answer

Answer :

Assuming the 300 mm refers to the diameter, there are 9.
by

Related questions

Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Last Answer : Answer: Option C

The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Description : The brick work is measured in sq metre, in case of (A) Honey comb brick work (B) Brick flat soling (C) Half brick walls or the partition (D) All the above

Last Answer : (D) All the above

The unit of relative permeability is (a) henry/metre (b) henry (c) henry/sq. m (d) it is dimensionless

Description : The unit of relative permeability is (a) henry/metre (b) henry (c) henry/sq. m (d) it is dimensionless

Last Answer : (d) it is dimensionless

Photographers: Can you tell me what difference between a 75-300mm and 55-250mm lens for Canon?

Description : Photographers: Can you tell me what difference between a 75-300mm and 55-250mm lens for Canon?

Last Answer : answer:55-250 will give you a wider angle and less telephoto. 75-300 will give you greater telephoto and less wide angle. The lower the first number, the wider the field of ... -Guide-Chris-Gatcum/dp/1465408452/ref=sr_1_1?s=books&ie=UTF8&qid=1401375024&sr=1-1&keywords=beginners+guide+to+photography

Nikon 55-200mm vs Nikon 70-300mm. Would you pick the former, or the latter?

Description : Nikon 55-200mm vs Nikon 70-300mm. Would you pick the former, or the latter?

Last Answer : i’d go for the 55–200 but i was never a big fan of telephoto. still, i think the versatility and price clinch it.

A cantilever shaft having 50 mm diameter and a length of 300mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m^2. Determine the static deflection of shaft in mm. A 0.144 B 0.244 C 0.344 D 0.444

Description : A cantilever shaft having 50 mm diameter and a length of 300mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m^2. Determine the static deflection of shaft in mm. A 0.144 B 0.244 C 0.344 D 0.444

Last Answer : A 0.144

The effective depth of a singly reinforced rectangular beam is 300mm. the section is over-reinforced and the neutral axis is 120mm below the top. If the maximum stress attained by concrete is 5N/mn2 and the modular ratio is 18, then the stress developed in the steel will (a) 130N/mm2 (b) 135N/mm2 (c) 160N/mm2 (d) 180N/mm2

Description : The effective depth of a singly reinforced rectangular beam is 300mm. the section is over-reinforced and the neutral axis is 120mm below the top. If the maximum stress attained by concrete is 5N/mn2 and the modular ratio ... in the steel will (a) 130N/mm2 (b) 135N/mm2 (c) 160N/mm2 (d) 180N/mm2

Last Answer : (b) 135N/mm2

The top diameter, bottom diameter and height of the mould used for slump test are (a) 100mm, 200mm, 300mm (b) 200mm,100mm,300mm (c) 200mm,300mm,100mm (d) 100mm,300mm,200mm

Description : The top diameter, bottom diameter and height of the mould used for slump test are (a) 100mm, 200mm, 300mm (b) 200mm,100mm,300mm (c) 200mm,300mm,100mm (d) 100mm,300mm,200mm

Last Answer : (a) 100mm, 200mm, 300mm

In slabs the Maximum horizontal distance between parallel main reinforcement should not exceed i.Three times effective depth ii Five times effective depth iii 300mm iv 450 mm [ A ] i and iii [ B ] i and iv [ C ] ii and iii [ D ] ii and iv

Description : In slabs the Maximum horizontal distance between parallel main reinforcement should not exceed i.Three times effective depth ii Five times effective depth iii 300mm iv 450 mm [ A ] i and iii [ B ] i and iv [ C ] ii and iii [ D ] ii and iv

Last Answer : [ A ] i and iii

The Maximum spacing of Main reinforcement „m‟ slabs shall be [ A ] Less than three times of the effective depth [ B ] Less than 300mm [ C ] Smaller of (a) and (b) [ D ] Greater of (a) and (b)

Description : The Maximum spacing of Main reinforcement „m‟ slabs shall be [ A ] Less than three times of the effective depth [ B ] Less than 300mm [ C ] Smaller of (a) and (b) [ D ] Greater of (a) and (b)

Last Answer : [ C ] Smaller of (a) and (b)

A 300mm diameter pipe, 5mm wall thickness is to be radiographed using the double wall single image technique. The source to be used is Iridium. Which of the following statements is true? a) It should not be done because the thickness is below that recommended b) It should be better to use a cobalt 60 source in this instance c) There is no problem with the technique d) Only the double wall, double image technique should be used with Iridium

Description : A 300mm diameter pipe, 5mm wall thickness is to be radiographed using the double wall single image technique. The source to be used is Iridium. Which of the following statements is true? a) ... problem with the technique d) Only the double wall, double image technique should be used with Iridium

Last Answer : c) There is no problem with the technique

What is the minimum overlap required when splicing bracing? a. 300mm (12 inches) b. 400mm (16 inches) c. 600mm (24 inches) d. 450mm (18 inches)

Description : What is the minimum overlap required when splicing bracing? a. 300mm (12 inches) b. 400mm (16 inches) c. 600mm (24 inches) d. 450mm (18 inches)

Last Answer : a. 300mm (12 inches)

Screw jack can be adjusted no more than? a. 300mm (12 inches) of threaded length showing b. 2/3 of the total threaded length showing c. 150mm (6 inches) of threaded length showing d. 1/3 of the total threaded length showing

Description : Screw jack can be adjusted no more than? a. 300mm (12 inches) of threaded length showing b. 2/3 of the total threaded length showing c. 150mm (6 inches) of threaded length showing d. 1/3 of the total threaded length showing

Last Answer : b. 2/3 of the total threaded length showing

What is the maximum distance that bracing can be installed from a node point on a scaffold? a. 200mm (8 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 250mm (10 inches)

Description : What is the maximum distance that bracing can be installed from a node point on a scaffold? a. 200mm (8 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 250mm (10 inches)

Last Answer : b. 300mm (12 inches)

What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Description : What is the height of the base lift (kicker lift) on a typical tube and coupler scaffold? a. 225mm (9 inches) b. 300mm (12 inches) c. 150mm (6 inches) d. 100mm (4 inches)

Last Answer : c. 150mm (6 inches

A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Description : A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Last Answer : d.16.27 mm.

The clear distance between consecutive sleepers laid over unballasted bridge on BG should not exceed a)300mm b)400mm c)450mm* d)550mm

Description : The clear distance between consecutive sleepers laid over unballasted bridge on BG should not exceed a)300mm b)400mm c)450mm* d)550mm

Last Answer : c)450mm*

What is maximum height above rail level for low-level passenger platform for BG? (a) 300mm (b) 455mm* (c) 525mm (d) 550mm

Description : What is maximum height above rail level for low-level passenger platform for BG? (a) 300mm (b) 455mm* (c) 525mm (d) 550mm

Last Answer : (b) 455mm

How much soil is there in a hole measuring one metre by one metre by one metre?

Description : How much soil is there in a hole measuring one metre by one metre by one metre?

Last Answer : Uh, one cubic meter. Is this a trick question?

A 2 kg block is dropped from a height of 4 metre onto a spring of force constant k = 1960 N/m. The spring will be compressed through a.1 cm b.4.5 cm c.3 cm d.8 cm e.107 dynes

Description : A 2 kg block is dropped from a height of 4 metre onto a spring of force constant k = 1960 N/m. The spring will be compressed through a.1 cm b.4.5 cm c.3 cm d.8 cm e.107 dynes

Last Answer : d. 8 cm

A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Description : A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Last Answer : a. 5 metres

The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Description : The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Last Answer : e. Zero

Femtometre x Nanometer x (Gigametre)2 = a.Micrometre b.Metre c.Picometre d.107 dynes e.Megametre

Description : Femtometre x Nanometer x (Gigametre)2 = a.Micrometre b.Metre c.Picometre d.107 dynes e.Megametre

Last Answer : a. Micrometre

If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Description : If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Last Answer : d. 932,000 kg

A rhombus shaped sheet with perimeter 40 and digonals are 12 cm is painted on bith sides at the rate of rs 5 per metre square. Find the cost of painting -Maths 9th

Description : A rhombus shaped sheet with perimeter 40 and digonals are 12 cm is painted on bith sides at the rate of rs 5 per metre square. Find the cost of painting -Maths 9th

Last Answer : Let ABCD be a rhombus, then AB=BC=CD=DA=x Perimeter of rhombus =40cm ⇒4x=40cm⇒x=10cm ∴AB=BC=CD=DA=10cm In △ABC,S=2a+b+c​=210+10+12​=16cm ar△ABC=16(16−10)(16−10)(16−12)​=16×6×6×4​=48cm2ar.ABCD=2×48=96cm2 Cost of painting the sheet =Rs(5×96×2)=Rs960 [Both sides]

A rhombus shaped sheet with perimeter 40 and digonals are 12 cm is painted on bith sides at the rate of rs 5 per metre square. Find the cost of painting -Maths 9th

Description : A rhombus shaped sheet with perimeter 40 and digonals are 12 cm is painted on bith sides at the rate of rs 5 per metre square. Find the cost of painting -Maths 9th

Last Answer : Let ABCD be a rhombus, then AB=BC=CD=DA=x Perimeter of rhombus =40cm ⇒4x=40cm⇒x=10cm ∴AB=BC=CD=DA=10cm In △ABC,S=2a+b+c​=210+10+12​=16cm ar△ABC=16(16−10)(16−10)(16−12)​=16×6×6×4​=48cm2ar.ABCD=2×48=96cm2 Cost of painting the sheet =Rs(5×96×2)=Rs960 [Both sides]

If force is expressed in Newton and the distance in metre, then the work done is expressed in -General Knowledge

Description : If force is expressed in Newton and the distance in metre, then the work done is expressed in -General Knowledge

Last Answer : Work done is expressed in force divided by distance. SI unit is joule. hope this helps u

What are Broad Gauge, Metre Gauge and Narrow Gauge in Indian Railway? -General Knowledge

Description : What are Broad Gauge, Metre Gauge and Narrow Gauge in Indian Railway? -General Knowledge

Last Answer : Broad gauge, meter gauge, narrow gauge indicate the width between two rails. The difference in their width is as follows: Broad gauge: 1.676 meters. Narrow gauge: 0.762 meters.

How Many Metres In 1 Square Metre?

Description : How Many Metres In 1 Square Metre?

Last Answer : monkeyddddddddddddddddddddddddddddddddddddddddddd

One and a half metre and two and a half metre?

Description : One and a half metre and two and a half metre?

Last Answer : 3/2 5/2

How many 30 cm lengths of string can be cut from a metre of string?

Description : How many 30 cm lengths of string can be cut from a metre of string?

Last Answer : 30

The volume of a closed square based rectangular box is 1000 cubic metre. The cost of constructing the base is 15 paise per square metre and the cost o

Description : The volume of a closed square based rectangular box is 1000 cubic metre. The cost of constructing the base is 15 paise per square metre and the cost o

Last Answer : The volume of a closed square based rectangular box is 1000 cubic metre. The cost of ... dimensions of box for minimum cost of construction.

Find the area of a triangle formed by A = 3i - 4j + 2k and B = i + j - 2k as adjacent sides measure in metre.

Description : Find the area of a triangle formed by A = 3i - 4j + 2k and B = i + j - 2k as adjacent sides measure in metre.

Last Answer : Find the area of a triangle formed by A = 3i - 4j + 2k and B = i + j - 2k as adjacent sides measure in metre.

A force F = 4i + 6j + 3k acting on a particle produces a displacement of S = 2i + 3j + 5k where F is expressed in newton and s in metre.

Description : A force F = 4i + 6j + 3k acting on a particle produces a displacement of S = 2i + 3j + 5k where F is expressed in newton and s in metre.

Last Answer : A force F = 4i + 6j + 3k acting on a particle produces a displacement of S = 2i + 3j + 5k where ... and s in metre. Find the work done by the force.

Define a metre.

Description : Define a metre.

Last Answer : Define a metre.

Classify the following units into fundamental, supplementary and derived units:  newton, metre, candela

Description : Classify the following units into fundamental, supplementary and derived units:  newton, metre, candela

Last Answer : Classify the following units into fundamental, supplementary and derived units: newton, metre, candela, ... , volt, mol, coulomb, farad, steradian.

A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)`. If each cubic metre of the wire contains `10^(29)` free

Description : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)`. If each cubic metre of the wire contains `10^(29)` free

Last Answer : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)` ... taken by an electron to cross the length of the wire.

A wire of length `L metre ` , carrying a current `I `ampere is bent in the form of a circle . The magnitude of its magnetic moment is …………. ` MKS unit

Description : A wire of length `L metre ` , carrying a current `I `ampere is bent in the form of a circle . The magnitude of its magnetic moment is …………. ` MKS unit

Last Answer : A wire of length `L metre ` , carrying a current `I `ampere is bent in the form of a circle . The magnitude of ... `(L^(2)I)/(4pi)` D. `(LI)/(4pi)`

An infinitely long conductor is bent into a circle as shown in figure. It carries a current I ampere and the radius of loop is R metre. The magnetic i

Description : An infinitely long conductor is bent into a circle as shown in figure. It carries a current I ampere and the radius of loop is R metre. The magnetic i

Last Answer : An infinitely long conductor is bent into a circle as shown in figure. It carries a current I ampere and the radius ... (0)I)/(8piR)(pi + 1)` D. zero

A particle carrying a charge equal to `100` times the charge on an electron is rotating per second in a circular path of radius `0.8 metre`. The value

Description : A particle carrying a charge equal to `100` times the charge on an electron is rotating per second in a circular path of radius `0.8 metre`. The value

Last Answer : A particle carrying a charge equal to `100` times the charge on an electron is rotating per second in a circular path ... 6)mu_(0)` D. `10^(-7)mu_(0)`

Show that the percentage error in the measurement of resistance by a metre bridge is minimum when the null point is near about the centre of the wire.

Description : Show that the percentage error in the measurement of resistance by a metre bridge is minimum when the null point is near about the centre of the wire.

Last Answer : Show that the percentage error in the measurement of resistance by a metre bridge is minimum when the null point is ... B. 50 cm C. 80 cm D. 100 cm

Convert :  a. Exactly 1.5 atm to pascals  b. 89 kPa to newton per square metre (N m^(-2)) 

Description : Convert :  a. Exactly 1.5 atm to pascals  b. 89 kPa to newton per square metre (N m^(-2)) 

Last Answer : Convert : a. Exactly 1.5 atm to pascals b. 89 kPa to newton per square metre (N m-2) ... -100°C to Kelvin e. 0.124 torr to standard atmosphere

If ten students are asked to measure the length of a piece of cloth upto a mm, using a metre scale,

Description : If ten students are asked to measure the length of a piece of cloth upto a mm, using a metre scale,

Last Answer : If ten students are asked to measure the length of a piece of cloth upto a mm, using a ... you think their answers will be identical? Give reasons.

Where is the statement of all pipes connected to a storage vessel should be insulated for up to a metre in length is a requirement of Building Regulations Part?

Description : Where is the statement of all pipes connected to a storage vessel should be insulated for up to a metre in length is a requirement of Building Regulations Part?

Last Answer : P

How many smoots are in one metre?

Description : How many smoots are in one metre?

Last Answer : Approx 0.5876 smoots.

How many wheelbarrows of aggregate are in 1 cubic metre of concrete?

Description : How many wheelbarrows of aggregate are in 1 cubic metre of concrete?

Last Answer : Feel Free to Answer

How do you work out 30cm of 1 metre?

Description : How do you work out 30cm of 1 metre?

Last Answer : What is the answer ?

What fraction of 1 metre is 15 centimetres?

Description : What fraction of 1 metre is 15 centimetres?

Last Answer : It is 15/100 which can be simplified. But the unsimplifiedversion is probably easier to work with.

What fraction of a metre equals to 3 decimeters?

Description : What fraction of a metre equals to 3 decimeters?

Last Answer : The deci- prefix means one tenth→ 3 dm = 3 × 1/10 m = 3/10 m→ 3 dm is (3/10 m)/(1 m) = 3/10 as a fraction of 1 m.

What fraction of a metre is 22 cm?

Description : What fraction of a metre is 22 cm?

Last Answer : It is 22/100.