If ten students are asked to measure the length of a piece of cloth upto a mm, using a metre scale,

If ten students are asked to measure the length of a piece of cloth upto a mm, using a metre scale,
by

1 Answer

Answer :

If ten students are asked to measure the length of a piece of cloth upto a mm, using a ... you think their answers will be identical? Give reasons.
by
selected by

Related questions

A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)`. If each cubic metre of the wire contains `10^(29)` free

Description : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)`. If each cubic metre of the wire contains `10^(29)` free

Last Answer : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)` ... taken by an electron to cross the length of the wire.

A trader sells 145 m of cloth for Rs 12325 at the profit of Rs 10 per metre of cloth. What is the cost price of 1 m of cloth? 1. Rs 65 2. Rs 75 3. Rs 95 4. Rs 85

Description : A trader sells 145 m of cloth for Rs 12325 at the profit of Rs 10 per metre of cloth. What is the cost price of 1 m of cloth? 1. Rs 65 2. Rs 75 3. Rs 95 4. Rs 85

Last Answer : 2. Rs 75

In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs) (A) 50" n(B) 30" n(C) 60" n (D) None of these

Description : In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per ... legs) (A) 50" n (B) 30" n (C) 60" n (D) None of these

Last Answer : (A) 50" n

A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The extension in the rod was 1 mm only. If Esteel = 2 × 106 kg/cm2 , the side of the rod, is (A) 1 cm (B) 1.5 cm (C) 2 cm (D) 2.5 cm

Description : A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The  extension in the rod was 1 mm only. If Esteel = 2 × 106  kg/cm2 , the side of the rod, is  (A) 1 cm  (B) 1.5 cm  (C) 2 cm  (D) 2.5 cm 

Last Answer : (C) 2 cm 

In new Rail as well as second hand rails how much end bends of the rails in lateral direction are permitted when checked with one metre straight edge before welding? (i) ± 0.2 mm in lateral direction (ii) ± 0.3 mm in lateral direction (iii) ± 0.5 mm in latera

Description : In new Rail as well as second hand rails how much end bends of the rails in lateral direction are permitted when checked with one metre straight edge before welding? (i) ± 0.2 mm in lateral direction (ii) ± 0.3 mm in lateral direction (iii) ± 0.5 mm in latera

Last Answer : (iii) ± 0.5 mm in latera

An umbrella is made by stitching 10 triangular pieces of cloth of two different colours (see figure), each piece measuring 20 cm, 50 cm and 50 cm. -Maths 9th

Description : An umbrella is made by stitching 10 triangular pieces of cloth of two different colours (see figure), each piece measuring 20 cm, 50 cm and 50 cm. -Maths 9th

Last Answer : Let the sides of each triangular piece be a = 20 cm, b = 50 cm, c = 50 cm

Three measuring rods are 64 cm,80 cm and 96 cm in length . What is the least length of cloth that can can be measured exact number of times using any one of these rods? (a) 9.60 m (b) 8 m (c) 9.60 cm (d) 96 m

Description : Three measuring rods are 64 cm,80 cm and 96 cm in length . What is the least length of cloth that can can be measured exact number of times using any one of these rods? (a) 9.60 m (b) 8 m (c) 9.60 cm (d) 96 m

Last Answer : Ans 4. 9.60 m

Elastomers can extend upto (A) Five times their original dimensions (B) Seven times their original dimensions (C) Ten times their original dimensions (D) Three times their original dimensions

Description : Elastomers can extend upto (A) Five times their original dimensions (B) Seven times their original dimensions (C) Ten times their original dimensions (D) Three times their original dimensions

Last Answer : Answer: Option C

Design black box test suits for a function that checks whether a character or string upto ten characters in a palindrome?

Description : Design black box test suits for a function that checks whether a character or string upto ten characters in a palindrome?

Last Answer : Ans Following may be the test cases: - Try with Even number of characters (MALAYALAM) - Try with Odd number of characters (ADDA) - Try with maximum length of string The following are negative test ... come for the following) - Try with empty string - Try with numbers - Try with special characters

Consider a system with twelve magnetic tape drives and three processes P1, P2 and P3. Process P1 requires maximum ten tape drives, process P2 may need as many as four tape drives and P3 may need upto nine tape drives. Suppose that at time t1, process P1 is holding five tape drives, process P2 is holding two tape drives and process P3 is holding three tape drives. At time t1, system is in: (A) safe state (B) unsafe state (C) deadlocked state (D) starvation state

Description : Consider a system with twelve magnetic tape drives and three processes P1, P2 and P3. Process P1 requires maximum ten tape drives, process P2 may need as many as four tape drives and P3 may need upto nine ... , system is in: (A) safe state (B) unsafe state (C) deadlocked state (D) starvation state

Last Answer : Answer: B

Find the area of a triangle formed by A = 3i - 4j + 2k and B = i + j - 2k as adjacent sides measure in metre.

Description : Find the area of a triangle formed by A = 3i - 4j + 2k and B = i + j - 2k as adjacent sides measure in metre.

Last Answer : Find the area of a triangle formed by A = 3i - 4j + 2k and B = i + j - 2k as adjacent sides measure in metre.

Air gap readings should be periodicly taken for electrical generation equipment. The best tool to use to take these measurements is a ___________. A. cloth (non-metalic) tape measure B. dial indicator C. inside micrometer D. tapered, long blade, feeler gage

Description : Air gap readings should be periodicly taken for electrical generation equipment. The best tool to use to take these measurements is a ___________. A. cloth (non-metalic) tape measure B. dial indicator C. inside micrometer D. tapered, long blade, feeler gage

Last Answer : Answer: D

A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular

Description : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular

Last Answer : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale ... (C) 0.053 cm (D) 0.529 cm

To measure insulation resistance of equipments of voltage rating upto 440 V the megger generator must generate...

Description : To measure insulation resistance of equipments of voltage rating upto 440 V the megger generator must generate   (a) 220 V (b) 440 V (c) 500 V (d) None of these 

Last Answer : 500 V

Students are asked to write an equivalent expression for a + b + c using the commutative property. Which student correctly wrote the expression?

Description : Students are asked to write an equivalent expression for a + b + c using the commutative property. Which student correctly wrote the expression?

Last Answer : hi

The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Description : The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Last Answer : e. Zero

A wire of length `L metre ` , carrying a current `I `ampere is bent in the form of a circle . The magnitude of its magnetic moment is …………. ` MKS unit

Description : A wire of length `L metre ` , carrying a current `I `ampere is bent in the form of a circle . The magnitude of its magnetic moment is …………. ` MKS unit

Last Answer : A wire of length `L metre ` , carrying a current `I `ampere is bent in the form of a circle . The magnitude of ... `(L^(2)I)/(4pi)` D. `(LI)/(4pi)`

Where is the statement of all pipes connected to a storage vessel should be insulated for up to a metre in length is a requirement of Building Regulations Part?

Description : Where is the statement of all pipes connected to a storage vessel should be insulated for up to a metre in length is a requirement of Building Regulations Part?

Last Answer : P

Rail section is generally designated by its A. Total weight B. Total length C. Weight per metre length D. Area of its cross-section

Description : Rail section is generally designated by its A. Total weight B. Total length C. Weight per metre length D. Area of its cross-section

Last Answer : C [Weight per metre length] Explanation: The rail section is designated by its weight in 1b/yard or in kg/m. The standard rail sections in use on Indian Railways are 60 kg/m, 52 kg/m and 9OR ... 60R for MG and 50R for NG. In India, the standard rails are either of medium manganese or carbon steels.

Number of subdivisions per metre length of a levelling staff is (A) 100 (B) 200 (C) 500 (D) 1000

Description : Number of subdivisions per metre length of a levelling staff is  (A) 100  (B) 200  (C) 500  (D) 1000 

Last Answer : (B) 200 

If is the pull applied at the ends of tape in kg, is the length of tape between end marks in metres, is the weight of the tape in kg per metre run, then sag correction (A) C = w²l3 /24F² (B) C = w 3 l²/24F² (C) C = w²l3 /24F3 (D) C = 24w²l3 /80F

Description : If is the pull applied at the ends of tape in kg, is the length of tape between end marks in metres, is the weight of the tape in kg per metre run, then sag correction (A) C = w²l3 /24F² (B) C = w 3 l²/24F² (C) C = w²l3 /24F3 (D) C = 24w²l3 /80F

Last Answer : (A) C = w²l3 /24F²

Numbers of links per metre length of a chain are (A) 2 (B) 5 (C) 7 (D) 10

Description : Numbers of links per metre length of a chain are (A) 2 (B) 5 (C) 7 (D) 10

Last Answer : (B) 5

If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Description : If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Last Answer : (B) 250 kg

For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is 3 × 10-3 cm3 /sec, the discharge per metre length of dam, is (A) 12 × 10-5 m3 /sec (B) 24 × 10-3 m3 /sec (C) 6 × 10-5 m3 /sec (D) 24 × 10-5 m3 /sec

Description : For a homogeneous earth dam 50 m high having 2 m free broad, a flow net was constructed and the results were : Number of potential drops = 2.4 Number of flow channels = 0.4. If co-efficiency of permeability of the dam material is ... 24 10-3 m3 /sec (C) 6 10-5 m3 /sec (D) 24 10-5 m3 /sec

Last Answer : (D) 24 × 10-5 m3 /sec

A pile of length carrying a uniformly distributed load per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be (A) WL²/15 (B) WL²/30 (C) WL²/60 (D) WL²/90

Description : A pile of length carrying a uniformly distributed load per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be (A) WL²/15 (B) WL²/30 (C) WL²/60 (D) WL²/90

Last Answer : Answer: Option D

A pile of length carrying a uniformly distributed load per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is (A) WL/8 (B) WL²/24 (C) WL²/47 (D) WL²/16

Description : A pile of length carrying a uniformly distributed load per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is (A) WL/8 (B) WL²/24 (C) WL²/47 (D) WL²/16

Last Answer : Answer: Option C

The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2(B) wH (C) wH2 /2 (D) wH2 /4

Description : The water pressure per metre length on a vertical masonry wall of dam is (where w = Specific weight of the liquid, and H = Height of the liquid) (A) wH/2 (B) wH (C) wH2 /2 (D) wH2 /4

Last Answer : Answer: Option C

A water tank contains 1.3 m deep water. The pressure exerted by the water per metre length of the tank is (A) 2.89 kN (B) 8.29 kN (C) 9.28 kN (D) 28.9 kN

Description : A water tank contains 1.3 m deep water. The pressure exerted by the water per metre length of the tank is (A) 2.89 kN (B) 8.29 kN (C) 9.28 kN (D) 28.9 kN

Last Answer : Answer: Option B

If the rate of change of the super-elevation along a curved portion of a 7 metre wide road is 1 in 150 and the maximum super-elevation allowed is 1 in 15, the maximum length of the transition curve to be provided at either end, is (A) 65 m (B) 70 m (C) 75 m (D) 80 m

Description : If the rate of change of the super-elevation along a curved portion of a 7 metre wide road is 1 in 150 and the maximum super-elevation allowed is 1 in 15, the maximum length of the transition curve to be provided at either end, is (A) 65 m (B) 70 m (C) 75 m (D) 80 m

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 degree (C) For every degree decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Description : Pick up the correct statement from the following: (A) Long tangent sections exceeding 3 km in length should be avoided (B) Curve length should be at least 150 metres for a deflection angle of 5 ... decrease in the deflection angle, 30 metre length of curve to be increased (D) All the above

Last Answer : Answer: Option D

Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Last Answer : Answer: Option C

While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Description : While estimating the qualities for the construction of a building, the correct metric unit is (A) Metre for length (B) Cubic metre for area (C) Square metres for volume (D) Litre for capacity

Last Answer : (D) Litre for capacity

The taper of precast concrete pile should not be more than (A) 1 cm per metre length (B) 2 cm per metre length (C) 4 cm per metre length (D) 5 cm per metre length

Description : The taper of precast concrete pile should not be more than (A) 1 cm per metre length (B) 2 cm per metre length (C) 4 cm per metre length (D) 5 cm per metre length

Last Answer : Answer: Option B

If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Description : If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Last Answer : Answer: Option A

A 300 metre long train crosses a platform in 39 seconds while it crosses a signal pole in 18 seconds. What is the length of the platform? A.310 m B.350 m C.600 m D.490 m E.None of these

Description : A 300 metre long train crosses a platform in 39 seconds while it crosses a signal pole in 18 seconds. What is the length of the platform? A.310 m B.350 m C.600 m D.490 m E.None of these

Last Answer : Answer - B (350 m) Explanation - when it cross a pole actually it is crossing itself so, S = 300/18 let length of platform be p relative speed = total lengths/time speed of ... pole,man and other is of considerable length like platform ,bridge. when train crosses pole,man it crosses itself

A wall have length 24m and breadth 16m. What will be total cost of painting it from both sides if rate of painting is Rs 8 per square metre? 1) Rs 5696 2) Rs 5856 3) Rs 6032 4) Rs 6144 5) Rs 6272

Description : A wall have length 24m and breadth 16m. What will be total cost of painting it from both sides if rate of painting is Rs 8 per square metre? 1) Rs 5696 2) Rs 5856 3) Rs 6032 4) Rs 6144 5) Rs 6272

Last Answer : 4) Rs 6144

The unit of measurement of a word length is (1) Metre (2) Byte (3) Bit (4) Millimetre

Description : The unit of measurement of a word length is (1) Metre (2) Byte (3) Bit (4) Millimetre

Last Answer : Bit

What length of 5 m wide cloth will be -Maths 9th

Description : What length of 5 m wide cloth will be -Maths 9th

Last Answer : Radius of the base of the conical tent (r) = 7 m Height of the conical tent (h) = 24 m Let 'l' be the slant height of the cone then l = root under ( √r2 + h2) = root under ( √72 + 242 ) = √625 = 25 ... of the cloth used = 550 m2 Length of 5 m wide cloth used = Area/Width = 550 m2/5 m = 110 m

Wave length of X-rays is about 1 angstrom; however it cannot pass through a sheet of (A) Paper (B) Cloth (C) Lead (D) Aluminium

Description : Wave length of X-rays is about 1 angstrom; however it cannot pass through a sheet of (A) Paper (B) Cloth (C) Lead (D) Aluminium

Last Answer : Option C

Wave length of X-rays is about 1 angstrom; however it cannot pass through a sheet of (A) Paper (B) Cloth (C) Lead (D) Aluminium

Description : Wave length of X-rays is about 1 angstrom; however it cannot pass through a sheet of (A) Paper (B) Cloth (C) Lead (D) Aluminium

Last Answer : Option C

Ten coulombs of positive charge are placed on an irregularly-shaped, solid piece of copper. Once the charge has stopped moving, the electric field inside the copper is: w) zero x) changes as one over the radius squared y) becomes smaller as you approach the center z) becomes larger as you approach the center

Description : Ten coulombs of positive charge are placed on an irregularly-shaped, solid piece of copper. Once the charge has stopped moving, the electric field inside the copper is: w) zero x) changes as one ... squared y) becomes smaller as you approach the center z) becomes larger as you approach the center

Last Answer : ANSWER: W -- ZERO

You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should _____________. A. replace the batteries in the instrument B. measure resistance by dividing the voltmeter indication by the ammeter indication C. set the pointer using a bridge D. change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Description : You are calibrating a multimeter using internal batteries to supply power for resistance measurements. However, you are unable to adjust the pointer to 'zero' using the adjustment knob. Therefore, you should ... change scales to the R X 100 scale and adjust using the 'zero ohms' adjusting knob

Last Answer : Answer: A

The following are true about ocular circulation: a. only 4% of the total blood supply to the eye goes to the retina b. the choroidal blood flow in normal people is ten times that of the grey mater of the brain c. autoregulation occurs in both retinal and choroidal circulation d. a PaCO2 rise of 1 mm Hg induces a 3% rise in retinal blood flow

Description : The following are true about ocular circulation: a. only 4% of the total blood supply to the eye goes to the retina b. the choroidal blood flow in normal people is ten times that of the grey mater ... and choroidal circulation d. a PaCO2 rise of 1 mm Hg induces a 3% rise in retinal blood flow

Last Answer : a PaCO2 rise of 1 mm Hg induces a 3% rise in retinal blood flow

A man told his son that he would give him $1000 if he could accomplish the following task. The father gave his son ten envelopes and a thousand dollars, all in one dollar bills. He told his son, 'Place the money in the envelopes in such a manner that no matter what number of dollars I ask for, you can give me one or more of the envelopes, containing the exact amount I asked for without having to open any of the envelopes. If you can do this, you will keep the $1000.' When the father asked for a sum of money, the son was able to give him envelopes containing the exact amount of money asked for. How did the son distribute the money among the ten envelopes? -Riddles

Description : A man told his son that he would give him $1000 if he could accomplish the following task. The father gave his son ten envelopes and a thousand dollars, all in one dollar bills. He told his ... exact amount of money asked for. How did the son distribute the money among the ten envelopes? -Riddles

Last Answer : The contents or the ten envelopes (in dollar bills) should be as follows: $1, 2, 4, 8, 16, 32, 64, 128, 256, 489. The first nine numbers are in geometrical progression, and their sum, deducted from 1,000, gives the contents of the tenth envelope.

An exceptional grade may be provided upto 1 in 12 along hill roads, if the length does not exceed (A) 45 m per km(B) 60 m per km (C) 75 m per km (D) 90 m per km

Description : An exceptional grade may be provided upto 1 in 12 along hill roads, if the length does not exceed (A) 45 m per km (B) 60 m per km (C) 75 m per km (D) 90 m per km

Last Answer : Answer: Option B

If you were asked to add 50 mL of a stock solution to a reaction vessel which piece of glassware would you use to obtain this volume of solution?

Description : If you were asked to add 50 mL of a stock solution to a reaction vessel which piece of glassware would you use to obtain this volume of solution?

Last Answer : You can use a graduated cylinder or a pipette of 50 mL.

Most bacterial cells are measured using what metric system of length? a. Millimeters (mm) b. Micrometers (µm) c. Nanometers (nm) d. Centimeters (cm)

Description : Most bacterial cells are measured using what metric system of length? a. Millimeters (mm) b. Micrometers (µm) c. Nanometers (nm) d. Centimeters (cm)

Last Answer : b. Micrometers (µm)

On a scale one to ten how would you score on my film concept?

Description : On a scale one to ten how would you score on my film concept?

Last Answer : answer:Which of these folks is the main character, and what is he or she trying to do? What's at stake, and what kind of obstacles are in the person's path? Without a sense of who it's really about ... 't rate it. You've given us a situation and some characters, but not a plot or a main character.

On a scale of one to ten, how superstitious are you?

Description : On a scale of one to ten, how superstitious are you?

Last Answer : 0. I don’t believe in magic.

On a scale of one to ten, how would you rate the president's work his first week in office?

Description : On a scale of one to ten, how would you rate the president's work his first week in office?

Last Answer : If he signs the Lily Ledbetter Fair Pay Bill into law today, I give him an A. If he doesn't, I give him a What-the-hell-are-you-thinking-just-sign-the-damn-law . Which is a B-. If he signs it by the ... , we all know he's going to do it. His blog says he's going to do it. What is he WAITING for?