What does the law of demand suggest that most demand curves will be?

What does the law of demand suggest that most demand curves will be?
by

1 Answer

Answer :

Need answer
by

Related questions

What is a sustainable exterior roofing insulation that curves?

Description : What is a sustainable exterior roofing insulation that curves?

Last Answer : Once the stuff has cured it's considered pretty inert and safe. You don't want to be anywhere near the stuff without protective equipment while it's being applied and you don't want to be in the ... re going to put the stuff on the outside I would have thought the risk even then would be minimal.

What is the purpose of a paring knife with a blade that curves in?

Description : What is the purpose of a paring knife with a blade that curves in?

Last Answer : This type of blade is best for fruit and vegetable carving and peeling in your hand. Imagine peeling an apple while holding the apple in your less dominant hand and the knife in your dominant hand. Now imagine peeling the apple toward yourself. That “birds beak curve” helps make the job easier.

How does the theory of comparative advantage relate to production possibility curves?

Description : How does the theory of comparative advantage relate to production possibility curves?

Last Answer : What homework is this for?

are used to express the geometry or shape of theelement a.Mode shapes b.Shape functions c.Natural curves d.None of the above

Description : are used to express the geometry or shape of theelement a.Mode shapes b.Shape functions c.Natural curves d.None of the above

Last Answer : b.Shape functions

The ___________ is used to create a surface using curves that form closed boundaries a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Description : The ___________ is used to create a surface using curves that form closed boundaries a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Last Answer : c.coons patch

In synthetic curves, first-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Description : In synthetic curves, first-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Last Answer : b.a slope continuous curve

In synthetic curves, zero-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Description : In synthetic curves, zero-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Last Answer : a.a position continuous curve

The is used to create a surface using curves that form closed boundaries. a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Description : The is used to create a surface using curves that form closed boundaries. a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Last Answer : c.coons patch

In synthetic curves, second-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Description : In synthetic curves, second-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above

Last Answer : c.a curvature continuous curve

curves allow local control of the curve a.Analytical b.Hermite cubic spline c.Beizer d.B-Spline

Description : curves allow local control of the curve a.Analytical b.Hermite cubic spline c.Beizer d.B-Spline

Last Answer : d.B-Spline

The tensor product technique constraints surfaces by two curves. a.2 b.1 c.3 d.4

Description : The tensor product technique constraints surfaces by two curves. a.2 b.1 c.3 d.4

Last Answer : b.1

QFor generating Coons patch we require a.A set of grid points on surface b.A set of control points c.Four bounding curves defining surface d.Two bounding curves and a set of grid control points

Description : QFor generating Coons patch we require a.A set of grid points on surface b.A set of control points c.Four bounding curves defining surface d.Two bounding curves and a set of grid control points

Last Answer : c.Four bounding curves defining surface

The slope on the road generally provided on the curves is known as a.Angle of repose b.Angle of friction c.Angle of banking d.Angle of reaction e.None of the above

Description : The slope on the road generally provided on the curves is known as a.Angle of repose b.Angle of friction c.Angle of banking d.Angle of reaction e.None of the above

Last Answer : c. Angle of banking

I come in different shapes and sizes. Part of me are curves, others are straight. You can put me anywhere you like, but there is only one right place for me. What am I? -Riddles

Description : I come in different shapes and sizes. Part of me are curves, others are straight. You can put me anywhere you like, but there is only one right place for me. What am I? -Riddles

Last Answer : A Jigsaw Puzzle Piece.

I come in different shapes and sizes. Part of me are curves, others are straight. You can put me anywhere you like, but there is only one right place for me. What am I? -Riddles

Description : I come in different shapes and sizes. Part of me are curves, others are straight. You can put me anywhere you like, but there is only one right place for me. What am I? -Riddles

Last Answer : A Jigsaw Puzzle Piece.

What are magnetic field lines? Justify the following statements (a) Two magnetic field lines never intersect each other. (b) Magnetic field lines are closed curves. -Science

Description : What are magnetic field lines? Justify the following statements (a) Two magnetic field lines never intersect each other. (b) Magnetic field lines are closed curves. -Science

Last Answer : Magnetic field lines: It is defined as the path along which the unit North pole (imaginary) tends to move in a magnetic field if free to do so. (a) The magnetic lines of force do not intersect ( ... a bar magnet and converge its south pole. Inside the magnet they move from south pole to north pole.

What is the rotation curves equation of early-type galaxies? -Space

Description : What is the rotation curves equation of early-type galaxies? -Space

Last Answer : The rotation curve of a disc galaxy (also called a velocity curve) is a plot of the orbital speeds of visible stars or gas in that galaxy versus their radial distance from that galaxy's centre. Stars revolve around their galaxy's centre at equal or increasing speed over a large range of distances.

Vertical curves?

Description : Vertical curves?

Last Answer : Vertical Curves are use in highway and street vertical alignment to provide a gradual change between two adjacent grade lines.

_______ helps in finding the areas of the curves.

Description : _______ helps in finding the areas of the curves.

Last Answer : _______ helps in finding the areas of the curves.

The sine and cosine curves intersect infinitely many times , bounding regions of equal areas . Sketch one of these regions and find its area .

Description : The sine and cosine curves intersect infinitely many times , bounding regions of equal areas . Sketch one of these regions and find its area .

Last Answer : The sine and cosine curves intersect infinitely many times , bounding regions of equal areas . Sketch one of these ... ` C. `3 sqrt2` D. `4 sqrt2`

Find the equation of normal to the curves `x=t^2, y=2t+1` at point

Description : Find the equation of normal to the curves `x=t^2, y=2t+1` at point

Last Answer : Find the equation of normal to the curves `x=t^2, y=2t+1` at point

Find the equation of normals of the following curves at the given points: (i) Curve`y^(2)=4 ax" at point "(at^(2), 2at)`. (ii) Curve `y= e^(x)" at poi

Description : Find the equation of normals of the following curves at the given points: (i) Curve`y^(2)=4 ax" at point "(at^(2), 2at)`. (ii) Curve `y= e^(x)" at poi

Last Answer : Find the equation of normals of the following curves at the given points: (i) Curve`y^(2)=4 ax" at point "(at^( ... (2)-9y^(2) = 432` at point (6, 4).

Find the angle of intersection of the curves `x y=a^2a n dx^2+y^2=2a^2`

Description : Find the angle of intersection of the curves `x y=a^2a n dx^2+y^2=2a^2`

Last Answer : Find the angle of intersection of the curves `x y=a^2a n dx^2+y^2=2a^2`

Find the equation of tangents of the following curves at the given points: (i) Curve`x^(2) = 25` at point (3, 4) (ii) Curve `y = 2x^(3) + 2x^(2) - 8x+

Description : Find the equation of tangents of the following curves at the given points: (i) Curve`x^(2) = 25` at point (3, 4) (ii) Curve `y = 2x^(3) + 2x^(2) - 8x+

Last Answer : Find the equation of tangents of the following curves at the given points: (i) Curve`x^(2) = 25` at point (3, 4) ... 2)(x-1) = 4x^(2)` at point (5, 5)

Find the inclination from X-axis of the tangent drawn of the following curves at the given points: (i) Curve`x^(2)-2y^(2)=8` at point (4, 2) (ii) Curv

Description : Find the inclination from X-axis of the tangent drawn of the following curves at the given points: (i) Curve`x^(2)-2y^(2)=8` at point (4, 2) (ii) Curv

Last Answer : Find the inclination from X-axis of the tangent drawn of the following curves at the given points: (i) Curve`x^(2)- ... `y^(2)=2x^(3)` at point (2, 4)

Find the slope of tengents drawn of the following curves at the given points: (i) Curve ` y =x^(3)+1` at point (0, 1) (ii) Curve ` x^(2)-y^(2)` = 20 a

Description : Find the slope of tengents drawn of the following curves at the given points: (i) Curve ` y =x^(3)+1` at point (0, 1) (ii) Curve ` x^(2)-y^(2)` = 20 a

Last Answer : Find the slope of tengents drawn of the following curves at the given points: (i) Curve ` y =x^(3)+1` at point ... 4" ax at point "(a/m^(2),(2a)/m)`

The minimum distance between the curves `y=tanx, AA x in (-(pi)/(2),(pi)/(2)) and (x-2-(pi)/(4))^(2)+y^(2)=1` is

Description : The minimum distance between the curves `y=tanx, AA x in (-(pi)/(2),(pi)/(2)) and (x-2-(pi)/(4))^(2)+y^(2)=1` is

Last Answer : The minimum distance between the curves `y=tanx, AA x in (-(pi)/(2),(pi)/(2)) and (x-2-(pi)/(4))^(2)+y^(2 ... )-1` B. `sqrt(5)+1` C. `sqrt(2)-1` D. 2`

The area bounded by the curves `y=6x-x^(2)` and `y=x^(2)-2x` is less then

Description : The area bounded by the curves `y=6x-x^(2)` and `y=x^(2)-2x` is less then

Last Answer : The area bounded by the curves `y=6x-x^(2)` and `y=x^(2)-2x` is less then A. 18 B. 19 C. 22 D. 20

The number of anterior curves present with humen vertebral column is

Description : The number of anterior curves present with humen vertebral column is

Last Answer : The number of anterior curves present with humen vertebral column is A. 2 B. 4 C. 6 D. 1

What are all properties of the stars that can measured from their spectra and light curves?

Description : What are all properties of the stars that can measured from their spectra and light curves?

Last Answer : Need answer

What are customary units of solubility on solubility curves?

Description : What are customary units of solubility on solubility curves?

Last Answer : These units are g/100 mL or g/L.

When the surface of a mirror curves like the inside of a bowl it is called a?

Description : When the surface of a mirror curves like the inside of a bowl it is called a?

Last Answer : concave mirror

I've heard of women-only gyms like Curves, so are there men-only gyms?

Description : I've heard of women-only gyms like Curves, so are there men-only gyms?

Last Answer : There are very few men only gyms. Most men enjoy working out with other women.

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

Railway tracks are banked on curves so that (a) Necessary centrifugal force may be obtained from the horizontal component of the weight of the train (b) Frictional force can be avoided between the tracks and wheels (c) Necessary centripetal force may be obtained from the horizontal component of the weight of the train (d) The train may not fly off in the opposite direction

Description : Railway tracks are banked on curves so that (a) Necessary centrifugal force may be obtained from the horizontal component of the weight of the train (b) Frictional force can be avoided between the tracks ... of the weight of the train (d) The train may not fly off in the opposite direction

Last Answer : Ans:(c)

Railway tracks are banked on curves so that : (1) the train may not fall down inwards. (2) the weight of the train may be reduced. (3) necessary centripetal force may be obtained from the horizontal component of the normal reaction due to track. (4) no frictional force may be produced between the wheels and the track.

Description : Railway tracks are banked on curves so that : (1) the train may not fall down inwards. (2) the weight of the train may be reduced. (3) necessary centripetal force may be obtained from the ... normal reaction due to track. (4) no frictional force may be produced between the wheels and the track.

Last Answer : (3) necessary centripetal force may be obtained from the horizontal component of the normal reaction due to track. Explanation: A vehicle moving at a fast speed on a straight rail/ road has ... it experiences an additional force, termed as centripetal force, acting towards the centre of the circle.

Railway tracks are banked on curves so that – (1) Necessary centrifugal force may be obtained from the horizontal component of the weight of the train (2) No frictional force may be produced between the tracks and the wheels of the train (3)Necessary centripetal force may be obtained from the horizontal component of the weight of the train (4) The train may not fall down inwards

Description : Railway tracks are banked on curves so that - (1) Necessary centrifugal force may be obtained from the horizontal component of the weight of the train (2) No frictional force may be produced between the ... the horizontal component of the weight of the train (4) The train may not fall down inwards

Last Answer : (3) Necessary centripetal force may be obtained from the horizontal component of the weight of the train

The graph shown in the illustration represents the speed droop curves of two equal capacity alternators about to be paralleled. When paralleled, the greater portion of the total load above 60% for each unit will be picked up _____________. EL-0025 A. by unit 'A' B. by unit 'B' C. equally by each unit D. none of the above

Description : The graph shown in the illustration represents the speed droop curves of two equal capacity alternators about to be paralleled. When paralleled, the greater portion of the total load above 60% for each unit will be picked up ... unit 'A' B. by unit 'B' C. equally by each unit D. none of the above

Last Answer : Answer: A

Which of the following statements is correct concerning the motor performance curves and data table shown in the illustration? EL-0006 A. The motor RPM at full load is 1737 RPM. B. The motor draws 12.62 kw from the switchboard when operating at full load. C. If the motor was developing 10 HP its power factor would be 0.92. D. All of the above.

Description : Which of the following statements is correct concerning the motor performance curves and data table shown in the illustration? EL-0006 A. The motor RPM at full load is 1737 RPM. B. The motor draws 12.62 kw ... If the motor was developing 10 HP its power factor would be 0.92. D. All of the above.

Last Answer : Answer: D

The torque and current curves for a three-phase induction motor with a cage rotor, are shown in the illustration. Which of the following statements is true concerning the depicted curves? EL-0056 A. As slip increases, rotor reactance decreases. B. The pullout point on the torque curve is about seven times the normal full load torque value. C. At stand still, stator current is 150% of normal. D. If the motor is loaded to the point where 40% slip has resulted, it will stall.

Description : The torque and current curves for a three-phase induction motor with a cage rotor, are shown in the illustration. Which of the following statements is true concerning the depicted curves? EL-0056 A. As slip ... D. If the motor is loaded to the point where 40% slip has resulted, it will stall.

Last Answer : Answer: D

What are V and inverted V curves of synchronous motor ?

Description : What are V and inverted V curves of synchronous motor ?

Last Answer : The variation of magnitude of line current with respect to the field current is called V curve . The variation of power factor with respect to the field current is called inverted V curve.

Roads are bent inwards on curves. Why?

Description : Roads are bent inwards on curves. Why?

Last Answer : Ans: The roads are bent inwards on the curves and at the turns because the bents avoid falling outside and prevent the accidents. OR When an object turns in a circle it is influenced by a centrifugal ... in a way that these bent inward at the turns to avoid falling outside and to prevent accidents.

Roads are bent inwards on curves.

Description : Roads are bent inwards on curves.

Last Answer : 1- The centrifugal force experienced by the vehicle is lowered by the raised end, so the vehicle doesn’t skit or goes off from the road. 2- The centripetal force is supplemented by the gravitaional forces from below.

During agitation of liquids, the (A) Froude number is independent for the curves between power number and Reynolds number in baffled system (B) Power number becomes independent of impellers Reynolds number at high Reynolds number, but is dependent on the geometry of the impeller (C) Froude number is used to account for the effect of surface (e.g., the centre vortex) on the power number (D) All (A), (B) and (C)

Description : During agitation of liquids, the (A) Froude number is independent for the curves between power number and Reynolds number in baffled system (B) Power number becomes independent of impellers Reynolds number at high Reynolds number, ... , the centre vortex) on the power number (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Equilibrium-moisture curves of different solids (A) Are different (B) Are same (C) Depend on the humidity of the gas (D) None of these

Description : Equilibrium-moisture curves of different solids (A) Are different (B) Are same (C) Depend on the humidity of the gas (D) None of these

Last Answer : (A) Are different

Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of theoretical plate calculation for distillation column (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Description : Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of ... (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Last Answer : (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column

Out of two equilibrium curves, first one lies above the diagonal and the second lies below the diagonal in the x-y plot. It means that separation by distillation is(A) Not possible in the second case unless vacuum is applied(B) Not possible in the second case unless high pressure is applied(C) More readily done in the second case compared to first one(D) None of these

Description : Out of two equilibrium curves, first one lies above the diagonal and the second lies below the diagonal in the x-y plot. It means that separation by distillation is (A) Not possible in the second ... (C) More readily done in the second case compared to first one (D) None of these

Last Answer : (C) More readily done in the second case compared to first one

The rate of shear versus the shear stress curves are time dependent for __________ fluid. (A) Thixotropic (B) Rheopectic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The rate of shear versus the shear stress curves are time dependent for __________ fluid. (A) Thixotropic (B) Rheopectic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The blades of a centrifugal impeller are said to be curved forward, if the __________ of the motion of impeller blades. (A) Inlet tip of a blade curves in a direction opposite to that (B) Outlet tip of a blade curves in a direction opposite to that (C) Inlet tip of a blade is towards the direction (D) Outlet tip of a blade is towards the direction

Description : The blades of a centrifugal impeller are said to be curved forward, if the __________ of the motion of impeller blades. (A) Inlet tip of a blade curves in a direction opposite to that (B) Outlet tip ... Inlet tip of a blade is towards the direction (D) Outlet tip of a blade is towards the direction

Last Answer : (D) Outlet tip of a blade is towards the direction