# What will happen if the back e.m.f. of a D.C. motor vanishes suddenly?

423 views

The armature may burn if the back e.m.f. of a D.C. motor vanishes suddenly.

## Related Questions

What is the back EMF of a dc motor?

2.6k views 0 answers

Last Answer : The mechanical power developed by a shunt motor will be maximum when the ratio of back e.m.f. to applied voltage is 0.5.

324 views 1 answer

Last Answer : In case of D.C. shunt motors the speed is dependent on back e.m.f. only because flux is practically constant in D:C. shunt motors.

250 views 1 answer

Last Answer : If a D.C. shunt motor is working at full load and if shunt field circuit suddenly opens this will make armature to take heavy current, possibly burning it.

158 views 1 answer

The back emf of synchronous motor depends on?
Last Answer : The back emf of synchronous motor depends on load angle.

65 views 1 answer

What is back EMF of synchronous motor?

77 views 0 answers

What is the back EMF of the motor?

68 views 0 answers

The counter e.m.f. of a d.c. motor?
Last Answer : The counter e.m.f. of a d.c. motor helps in energy conversion.

90 views 1 answer

Last Answer : When the armature of a D.C. motor rotates, e.m.f. induced is back e.m.f.

203 views 1 answer

Last Answer : In case the back e.m.f. and the speed of a D.C. motor are doubled, the torque developed by the motor will remain unchanged.

228 views 1 answer

As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit?
Last Answer : As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit a resistance is connected in series with armature.

187 views 1 answer

What is back emf?
Last Answer : Back EMF: When a current carrying conductor is placed in a magnetic field it experiences a force; when it moves due to the force it (conductor) cuts the magnetic field due to which an emf is ... (hence the applied armature voltage) is opposed by the induced emf which is therefore called as Back emf.

91 views 1 answer

Do AC induction motors have back EMF?

71 views 0 answers

What is back EMF in inductor?

138 views 0 answers

What is the back EMF in Transformers?

77 views 0 answers

What is the back EMF?
Last Answer : When the armature of a d.c. motor rotates under the influence of the driving torque, the armature conductors move through the magnetic field and hence e.m.f. is induced in them as in a generator. The ... that energy conversion in a d.c. motor is only possible due to the production of back emf.

107 views 1 answer

The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors rotating at 600 rpm and with 1 Wb flux per pole is  (1) 1000V (2) 100V (3) 600V (4) 10,000V
Last Answer : The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors rotating at 600 rpm and with 1 Wb flux per pole is 1000V

370 views 1 answer

Last Answer : In a differentially compounded D.C. motor, if shunt field suddenly opens the motor will first stop and then run in opposite direction as series motor.

94 views 1 answer

Last Answer : If a D.C. shunt motor is working at no load and if shunt field circuit suddenly opens this will result in excessive speed, possibly destroying armature due to excessive centrifugal stresses.

122 views 1 answer

In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is :
Last Answer : In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is : 0.075

109 views 1 answer

Last Answer : If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will increase.

201 views 1 answer

Describe the reason of using dc series motor for electric trains.
Last Answer : Electric trains require an inverse torque speed characteristics for proper operation. That is a higher torque is required at start (when speed is nil or low) and as the train picks up ... torque - speed characteristics of DC series motors match, these motors are suitable for electric trains

142 views 1 answer

A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be
Last Answer : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be 474 V

481 views 1 answer

A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is
Last Answer : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is 36 Ohm

329 views 1 answer

The function of a brush and commutator arrangement in a dc motor is to  (1) produce unidirectional torque (2) produce unidirectional current in the armature (3) help in changing the direction of rotation of the armature (4) reduce sparking
Last Answer : The function of a brush and commutator arrangement in a dc motor is to produce unidirectional torque

2.5k views 1 answer

Last Answer : If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor is to be derated by a factor recommended by manufacturer and select the next higher H.P. motor.

97 views 1 answer

Last Answer : For a D.C. shunt motor if the excitation is changed torque will change but power will remain constant.

168 views 1 answer

The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above
Last Answer : The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above

388 views 1 answer

Last Answer : At the instant of starting when a D.C. motor is put on supply, it behaves like a low resistance circuit.

130 views 1 answer

Last Answer : The speed of a D.C. shunt motor can be increased by increasing the resistance in field circuit.

134 views 1 answer

Last Answer : The armature voltage control of D.C. motor provides constant torque drive.

91 views 1 answer

Last Answer : The armature torque of the D.C. shunt motor is proportional to armature current.

210 views 1 answer

Last Answer : As the load is increased the speed of D.C. shunt motor will reduce slightly.

142 views 1 answer

Last Answer : Flywheel is used with D.C. compound motor to reduce the peak demand by the motor, compound motor will have to be cumulatively compounded.

352 views 1 answer

Last Answer : Sparking, is discouraged in a D.C. motor because commutator gets damaged.

159 views 1 answer

Last Answer : D.C. Series motor is generally preferred for cranes and hoists.

120 views 1 answer

Last Answer : (b) Clostridium butylicum Lipase Removal of oil stains

107 views 1 answer

Last Answer : Sparking at the commutator of a D.C. motor may result in damage to commutator segments, damage to commutator insulation, increased power consumption.

228 views 1 answer

Last Answer : Cumulatively compounded D.C. motor will be suitable along with flywheel for intermittent light and heavy loads.

175 views 1 answer

Last Answer : Differentially compounded D.C. motor has got maximum self loading property.

77 views 1 answer

Last Answer : The current drawn by the armature of D.C. motor is directly proportional to the torque required.

582 views 1 answer

Last Answer : In a D.C. series motor, if the armature current is reduced by 50%, the torque of the motor will be equal to 25% of the previous value.

503 views 1 answer

Last Answer : The speed of a D.C. series motor is inversely proportional to the armature current.

114 views 1 answer

Last Answer : The starting resistance of a D.C. motor is generally low.

169 views 1 answer

Last Answer : In case the conditions for maximum power for a D.C. motor are established, the efficiency of the motor will be less than 50%.

177 views 1 answer

Last Answer : By looking at Commutator part of the motor, it can be easily confirmed that a particular motor is D.C. motor.

244 views 1 answer

Last Answer : In a D.C. shunt motor, under the conditions of maximum power, the current in the armature will be more than full-load current.

366 views 1 answer

Last Answer : In a D.C. shunt motor, speed is independent of armature current.

87 views 1 answer

Last Answer : The speed of a D.C. shunt motor more than its full-load speed can be obtained by decreasing the field current.

146 views 1 answer

Last Answer : If a D.C. motor is connected across the A.C. supply it will burn due to heat produced in the field winding by eddy currents.