How 500 in is greater than or less than or equal to 40 ft?

Description : Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Last Answer : d. 300 hPa

An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Description : An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Last Answer : a. 500 ft/min

Which cable length has the highest attenuation? ∙ A. 1 km ∙ B. 2 km ∙ C. 95 ft. ∙ D. 500 ft.

Description : Which cable length has the highest attenuation? ∙ A. 1 km ∙ B. 2 km ∙ C. 95 ft. ∙ D. 500 ft.

Last Answer : B. 2 km

At the alternate aerodrome, the commander of a turbojet engine aeroplane should have a fuel quantity (final reserve) sufficient for flying during: a. 30 minutes at holding flight speed at 1,500 ft b. 45 minutes at holding flight speed at 1,500 ft c. 30 minutes at cruising speed d. 45 minutes at cruising speed

Description : At the alternate aerodrome, the commander of a turbojet engine aeroplane should have a fuel quantity (final reserve) sufficient for flying during: a. 30 minutes at holding flight speed at 1,500 ft b. 45 ... speed at 1,500 ft c. 30 minutes at cruising speed d. 45 minutes at cruising speed

Last Answer : a. 30 minutes at holding flight speed at 1,500 ft

Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Description : Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Last Answer : d. 300 hPa

An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Description : An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Last Answer : a. 500 ft/min

Is 6 ft greater than 300 cm?

Description : Is 6 ft greater than 300 cm?

Last Answer : No, 6 feet is less than 300 cm (10 ft.).

Is 6200 ft greater than 1 mile and 900 feet?

Description : Is 6200 ft greater than 1 mile and 900 feet?

Last Answer : Assuming you're referring to a statute mile, yes, 6200 feetwould be greater than 1 mile (5280) plus 900 feet.

Is 98 in greater than 8 ft?

Description : Is 98 in greater than 8 ft?

Last Answer : 98 ÷ 12 = 8 feet 2 inchesTherefore. 98 inches is longer than 8 feet.

Is 3 yd 2 ft greater than 132 in?

Description : Is 3 yd 2 ft greater than 132 in?

Last Answer : No because they are the same lengths 3 yards and 2 feet = 132inches

Is 5 yd 2 ft greater than 200 in?

Description : Is 5 yd 2 ft greater than 200 in?

Last Answer : What is the answer ?

Is 3 yd 2 ft greater than 132 in?

Description : Is 3 yd 2 ft greater than 132 in?

Last Answer : No because they are the same lengths 3 yards and 2 feet = 132inches

Is 27 ft greater than 324 in?

Description : Is 27 ft greater than 324 in?

Last Answer : No

Is 25 ft greater than 8 yd 11 in?

Description : Is 25 ft greater than 8 yd 11 in?

Last Answer : Yes.

Is 36 yd 2 feet greater than 36 ft 2 in?

Description : Is 36 yd 2 feet greater than 36 ft 2 in?

Last Answer : yes 36 ft 2 in = 12 yd 2 in so 36 yd 2 ft is more than 3 times greater

A working partner gets 25% as his commissions after his commissions paid that is equal to Rs.7500, then what is the total profit ? A) Rs.32,000 B) Rs.30,000 C) Rs.37,500 D) Rs.40,000 E) None of these

Description : A working partner gets 25% as his commissions after his commissions paid that is equal to Rs.7500, then what is the total profit ? A) Rs.32,000 B) Rs.30,000 C) Rs.37,500 D) Rs.40,000 E) None of these

Last Answer : Answer: C X=total profit 25/100*[x-7500] = 7500 x-7500 = 7500*100/25 =30,000 x = 37,500

Is 12 ft or 4 yd greater?

Description : Is 12 ft or 4 yd greater?

Last Answer : They're the same.

What one is greater 21000 ft or 4 miles?

Description : What one is greater 21000 ft or 4 miles?

Last Answer : Since one mile = 5280 ft, 4 miles = 21120 ft. 4 miles is greaterthan 21000 ft.

What is greater 64 in or 5 ft?

Description : What is greater 64 in or 5 ft?

Last Answer : What is the answer ?

Which is greater 6200 ft or 1 mile 900 ft?

Description : Which is greater 6200 ft or 1 mile 900 ft?

Last Answer : 6200 feet is greater than 1 mile and 900 feet which equals 6180 feet

When towing 40 ft fifth wheel do I need a class b?

Description : When towing 40 ft fifth wheel do I need a class b?

Last Answer : What license you need depends on a number of factors, namely,the vehicle's use, the Gross Combined Weight Rating of the towvehicle and of the trailer, and the Gross Combined Weight Rating ofthe two.For ... if the vehicleis of a non-exempt category.Feel free to PM me if you have any questions.

Maximum theoretical suction lift for water at 15°C by a centrifugal pump is 34 ft. The same for water at 90°C will be __________ ft. (A) 40 (B) 34 (C) 8 (D) 37

Description : Maximum theoretical suction lift for water at 15°C by a centrifugal pump is 34 ft. The same for water at 90°C will be __________ ft. (A) 40 (B) 34 (C) 8 (D) 37

Last Answer : (C) 8

In a three-stage space division switch, if N = 200, the number of crosspoints is ______. A) 40,000 B) greater than 40,000 C) less than40,000 D) greater than 100,000

Description : In a three-stage space division switch, if N = 200, the number of crosspoints is ______. A) 40,000 B) greater than 40,000 C) less than40,000 D) greater than 100,000

Last Answer : ess than40,00

Based onthe Clos criteria, if N = 200, then n mustbe equal to or greater than____. A) 10 B) 20 C) 30 D) 40

Description : Based onthe Clos criteria, if N = 200, then n mustbe equal to or greater than____. A) 10 B) 20 C) 30 D) 40

Last Answer : 10

Is 1 yard less than 4 ft?

Description : Is 1 yard less than 4 ft?

Last Answer : Yes because 1 yard is 3 feet

Is 37 ft less than 435 in?

Description : Is 37 ft less than 435 in?

Last Answer : No. 37ft is 444 inches.

How many ft. lbs are equal to 132 in. lbs.?

Description : How many ft. lbs are equal to 132 in. lbs.?

Last Answer : Your measurements are wrong. You have two different units ofmeasurement in your question. Feet is a measurement of length whilepounds is a measurement of weight. They are not equal orcompatible. So, we can’t give you an answer.

1 BTU/hr.ft.°F is equal to __________ kcal/hr. m.°C. (A) 1.49 (B) 1 (C) 4.88 (D) None of these

Description : 1 BTU/hr.ft.°F is equal to __________ kcal/hr. m.°C. (A) 1.49 (B) 1 (C) 4.88 (D) None of these

Last Answer : (A) 1.49

A BTU/hr.ft. 2 °F is equal to (A) 1 kcal/hr. m2°C (B) 4.88 kcal/hr. m. 2°C (C) 1 kcal/hr. m2 .°K (D) None of these

Description : A BTU/hr.ft. 2 °F is equal to (A) 1 kcal/hr. m2°C (B) 4.88 kcal/hr. m. 2°C (C) 1 kcal/hr. m2 .°K (D) None of these

Last Answer : (B) 4.88 kcal/hr. m. 2°C

Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity (C) In unsteady state heat conduction, heat flows in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Description : Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the ... in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Last Answer : (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity

One horsepower is equal to (A) 550 lbf.ft/second (B) 550 kgf.m/second (C) Both (A) and (B) (D) 550 lbf.ft./h

Description : One horsepower is equal to (A) 550 lbf.ft/second (B) 550 kgf.m/second (C) Both (A) and (B) (D) 550 lbf.ft./h

Last Answer : (A) 550 lbf.ft/second

Double pipe heat exchangers are used (A) When heat transfer area required is very high (B) When heat transfer area required is very low, i.e. (100-200 ft 2 ). (C) Because it occupies less floor area (D) Because it is less costly

Description : Double pipe heat exchangers are used (A) When heat transfer area required is very high (B) When heat transfer area required is very low, i.e. (100-200 ft 2 ). (C) Because it occupies less floor area (D) Because it is less costly

Last Answer : (B) When heat transfer area required is very low, i.e. (100-200 ft 2 )

How do you find the smallest multiple of 19 which-is greater than 500?

Description : How do you find the smallest multiple of 19 which-is greater than 500?

Last Answer : Divide 500 by 19. The answer will be 26 and some fractionalamount. Since 26 x 19 will be under 500, then 27 x 19 will be thefirst multiple over it. The answer is 513.

Is 500 ml greater than 1 L?

Description : Is 500 ml greater than 1 L?

Last Answer : Need answer

By approximately what factor is the sweetness of saccharin greater than that of sugar? (a) 5 (b) 50 (c) 500 (d) 1000

Description : By approximately what factor is the sweetness of saccharin greater than that of sugar? (a) 5 (b) 50 (c) 500 (d) 1000

Last Answer : 500

Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Description : Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Last Answer : a. greater than the dynamic driction

In actual machines a.Mechanical advantage is unity b.Mechanical advantage is greater than velocity ratio c.Mechanical advantage is less than velocity ratio d.Mechanical advantage is less than unity e.Mechanical advantage is equal to velocity ratio

Description : In actual machines a.Mechanical advantage is unity b.Mechanical advantage is greater than velocity ratio c.Mechanical advantage is less than velocity ratio d.Mechanical advantage is less than unity e.Mechanical advantage is equal to velocity ratio

Last Answer : c. Mechanical advantage is less than velocity ratio

Give a logical expression for : 1) score is greater than or equal to 80 but less than 90 -Technology

Description : Give a logical expression for : 1) score is greater than or equal to 80 but less than 90 -Technology

Last Answer : \(80

, B, C and D are four digits. Average of A and B are equal to average of C and D. Average of B and D is greater than average of A and B whereas average of A and D is less than average of A and B.Which digit has maximum value?

Description : , B, C and D are four digits. Average of A and B are equal to average of C and D. Average of B and D is greater than average of A and B whereas average of A and D is less than average of A and B.Which digit has maximum value?

Last Answer : D has the maximum value

Is one sixth greater than less than or equal to one sixths?

Description : Is one sixth greater than less than or equal to one sixths?

Last Answer : Is is one sixth greater than less than or equal to threesixths

Is -20 greater than less than or equal to the number 14?

Description : Is -20 greater than less than or equal to the number 14?

Last Answer : To compare -20 and 14, a positive number (in this case, 14), isalways greater than any negative number.

Is 254 centimeters is greater than less than or equal to 25.4?

Description : Is 254 centimeters is greater than less than or equal to 25.4?

Last Answer : As stated the question is nonsense as you cannot compare unitsto numbers.-----------------------------------------------------------However, if you have forgotten to include ... , Mm, hands,feet, yards, fathoms, rods, chains, furlongs, miles, nauticalmiles, leagues, light years then 254 cm are less.

Is 37 greater than less than or equal to 68?

Description : Is 37 greater than less than or equal to 68?

Last Answer : 37 is less than 683/7 is less than 6/8

How 500 in is greater than or less than or equal to 40 ft?

Please log in or register to add a comment.

Please log in or register to answer this question.

1 Answer

Answer :

Please log in or register to add a comment.

Related questions