Is 6 ft greater than 300 cm?

Is 6 ft greater than 300 cm?
by

1 Answer

Answer :

No, 6 feet is less than 300 cm (10 ft.).
by
selected by

Related questions

A bullet is fired vertically upwards with a velocity of 2200 ft/s. Bullet ascends to a height of a.56,900 ft b.107 dynes c.75,000 ft d.48.300 ft e.65,800 ft

Description : A bullet is fired vertically upwards with a velocity of 2200 ft/s. Bullet ascends to a height of a.56,900 ft b.107 dynes c.75,000 ft d.48.300 ft e.65,800 ft

Last Answer : c. 75,000 ft

A 300 ft. train is traveling 300 ft. per minute must travel through a 300 ft. long tunnel. How long will it take the train to travel through the tunnel? -Riddles

Description : A 300 ft. train is traveling 300 ft. per minute must travel through a 300 ft. long tunnel. How long will it take the train to travel through the tunnel? -Riddles

Last Answer : Two minutes. It takes the front of the train one minute and the rest of the train will take two minutes to clear the tunnel.

How much work is done in 1 minute by a machine operating at 300 ft. lb-sec?

Description : How much work is done in 1 minute by a machine operating at 300 ft. lb-sec?

Last Answer : Feel Free to Answer

The maximum head that can be developed by a single impeller is __________ ft(A) 25(B) 100(C) 250-300(D) 1000.

Description : The maximum head that can be developed by a single impeller is __________ ft. (A) 25 (B) 100 (C) 250-300 (D) 1000

Last Answer : (C) 250-300

Ten cu ft. of air at 300 psia 400°F is cooled to 140°F at constant volume. What is the final pressure? (formula: p2 = p1T2/T1)  a. 0  b. 209 psia  c. - 420 psia  d. None of the above

Description : Ten cu ft. of air at 300 psia 400°F is cooled to 140°F at constant volume. What is the final pressure? (formula: p2 = p1T2/T1)  a. 0  b. 209 psia  c. - 420 psia  d. None of the above

Last Answer : 209 psia

Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Description : Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)?  a. 200 hPa  b. 700 hPa  c. 500 hPa  d. 300 hPa

Last Answer : d. 300 hPa

An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Description : An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Last Answer : a. 500 ft/min

Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Description : Which constant pressure altitude chart is standard for a 30,065 ft pressure level (FL 300)? a. 200 hPa b. 700 hPa c. 500 hPa d. 300 hPa

Last Answer : d. 300 hPa

An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Description : An aircraft is travelling at 100kts forward speed on a 3° glidescope. What is its rate of descent? a. 500 ft/min b. 300 ft/min c. 250 ft/min d. 600 ft/min

Last Answer : a. 500 ft/min

Is 6200 ft greater than 1 mile and 900 feet?

Description : Is 6200 ft greater than 1 mile and 900 feet?

Last Answer : Assuming you're referring to a statute mile, yes, 6200 feetwould be greater than 1 mile (5280) plus 900 feet.

Is 98 in greater than 8 ft?

Description : Is 98 in greater than 8 ft?

Last Answer : 98 ÷ 12 = 8 feet 2 inchesTherefore. 98 inches is longer than 8 feet.

Is 3 yd 2 ft greater than 132 in?

Description : Is 3 yd 2 ft greater than 132 in?

Last Answer : No because they are the same lengths 3 yards and 2 feet = 132inches

Is 5 yd 2 ft greater than 200 in?

Description : Is 5 yd 2 ft greater than 200 in?

Last Answer : What is the answer ?

Is 4 yd greater or less than 13 ft?

Description : Is 4 yd greater or less than 13 ft?

Last Answer : What is the answer ?

How 500 in is greater than or less than or equal to 40 ft?

Description : How 500 in is greater than or less than or equal to 40 ft?

Last Answer : Need answer

Is 3 yd 2 ft greater than 132 in?

Description : Is 3 yd 2 ft greater than 132 in?

Last Answer : No because they are the same lengths 3 yards and 2 feet = 132inches

Is 27 ft greater than 324 in?

Description : Is 27 ft greater than 324 in?

Last Answer : No

Is 25 ft greater than 8 yd 11 in?

Description : Is 25 ft greater than 8 yd 11 in?

Last Answer : Yes.

Is 36 yd 2 feet greater than 36 ft 2 in?

Description : Is 36 yd 2 feet greater than 36 ft 2 in?

Last Answer : yes 36 ft 2 in = 12 yd 2 in so 36 yd 2 ft is more than 3 times greater

How to convert centimeter (cm) into feet (ft)?

Description : How to convert centimeter (cm) into feet (ft)?

Last Answer : answer:Just go to Google and enter it in the search box. For example, if it’s 25 cm, enter: 25 cm in feet You will get the answer. It’s that easy! (The answer for 25 cm is 0.82 feet, by the way.)

Who can answer this) A scale drawing of a billboard uses the scale 4 cm : 9 ft. The length of the billboard in the drawing is 11 cm. How long is the actual billboard (Who can answer this)?

Description : Who can answer this) A scale drawing of a billboard uses the scale 4 cm : 9 ft. The length of the billboard in the drawing is 11 cm. How long is the actual billboard (Who can answer this)?

Last Answer : 24.75ft.

What is the physical length of the above transmission line at 3/8λ long? A.0.82 m B. 0.82 ft C. 0.82 in D. 0.82 cm

Description : What is the physical length of the above transmission line at 3/8λ long? A.0.82 m B. 0.82 ft C. 0.82 in D. 0.82 cm

Last Answer : B. 0.82 ft

A simply supported wooden beam 150 cm long and having a cross section 16 cm × 24 cm carries a concentrated load, at the centre. If the permissible stress ft = 75 kg/cm2 and fs= 10 kg/cm2 the safe load is (A) 3025 kg (B) 3050 kg (C) 3075 kg (D) 3100 kg

Description : A simply supported wooden beam 150 cm long and having a cross section 16 cm × 24 cm carries a  concentrated load, at the centre. If the permissible stress ft = 75 kg/cm2  and fs= 10 kg/cm2  the safe  load is  (A) 3025 kg  (B) 3050 kg  (C) 3075 kg  (D) 3100 kg 

Last Answer : (C) 3075 kg 

Is 12 ft or 4 yd greater?

Description : Is 12 ft or 4 yd greater?

Last Answer : They're the same.

What one is greater 21000 ft or 4 miles?

Description : What one is greater 21000 ft or 4 miles?

Last Answer : Since one mile = 5280 ft, 4 miles = 21120 ft. 4 miles is greaterthan 21000 ft.

What is greater 64 in or 5 ft?

Description : What is greater 64 in or 5 ft?

Last Answer : What is the answer ?

Which is greater 6200 ft or 1 mile 900 ft?

Description : Which is greater 6200 ft or 1 mile 900 ft?

Last Answer : 6200 feet is greater than 1 mile and 900 feet which equals 6180 feet

5,200 ft 145 in is greater than1 mi 40 in?

Description : 5,200 ft 145 in is greater than1 mi 40 in?

Last Answer : 1 mi 40 in

If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm

Description : If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm

Last Answer : Answer: Option C

A slit of width ‘a’ is illuminated by white light. For what value of ‘a’ will the first minimum for red light fall at an angle of 300 wavelength of red light is 6500 A0 A. 1.1 x 10 -3 cm B. 1.4 X 10 -4 cm C. 1.3 X 10 -4 cm D. 1.6 X 10 -4 cm

Description : A slit of width ‘a’ is illuminated by white light. For what value of ‘a’ will the first minimum for red light fall at an angle of 300 wavelength of red light is 6500 A0 A. 1.1 x 10 -3 cm B. 1.4 X 10 -4 cm C. 1.3 X 10 -4 cm D. 1.6 X 10 -4 cm

Last Answer : C. 1.3 X 10 -4 cm

Is 6ft bigger than 300 cm?

Description : Is 6ft bigger than 300 cm?

Last Answer : 6 feet = 182.88 cm.

Is 0.300 greater than 0.030?

Description : Is 0.300 greater than 0.030?

Last Answer : 0.300 is greater than 0.030

Is 19 pounds greater or less than 300 ounces?

Description : Is 19 pounds greater or less than 300 ounces?

Last Answer : greater 300 / 16 = 18.75 19 x 16 = 304

Froude number is not a factor (A) For Reynolds number greater than 300 (B) When there is no vortex formation (C) For unbaffled tank (D) None of these

Description : Froude number is not a factor (A) For Reynolds number greater than 300 (B) When there is no vortex formation (C) For unbaffled tank (D) None of these

Last Answer : (B) When there is no vortex formation

In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be (A) Less than 300 mm (B) Between 300 mm and 750 mm (C) Between 750 mm and 1 m (D) Greater than 1 m

Description : In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be (A) Less than 300 mm (B) Between 300 mm and 750 mm (C) Between 750 mm and 1 m (D) Greater than 1 m

Last Answer : (B) Between 300 mm and 750 mm

An object is 60 cm in front of a thin lens, the image being 300 cm on the other side of the lens. Calculate the displacement of the image, when the ob

Description : An object is 60 cm in front of a thin lens, the image being 300 cm on the other side of the lens. Calculate the displacement of the image, when the ob

Last Answer : An object is 60 cm in front of a thin lens, the image being 300 cm on the other side of the ... when the object is moves 20 cm nearer to the lens.

The spacing of man holes along a straight portion of a sewer is 300 m, the diameter of the sewer may be A. 0.9 cm B. 1.2 m C. 1.5 m D. > 1.5 m

Description : The spacing of man holes along a straight portion of a sewer is 300 m, the diameter of the sewer may be A. 0.9 cm B. 1.2 m C. 1.5 m D. > 1.5 m

Last Answer : ANS: D

In a tension test, the yield stress is 300 kg/cm2 , in the octahedral shear stress at the point is: (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm (D) 250 kg/cm2

Description : In a tension test, the yield stress is 300 kg/cm2 , in the octahedral shear stress at the point is: (A) 100 kg/cm2 (B) 150 kg/cm2 (C) 200 kg/cm (D) 250 kg/cm2

Last Answer : (A) 100 kg/cm2

The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (A) 200 (B) 240 (C) 360 (D) 416

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm  length, is  (A) 200  (B) 240  (C) 360  (D) 416

Last Answer : (D) 416

A short column 20 cm × 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on the column, should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these

Description : A short column 20 cm 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on ... should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these

Last Answer : Answer: Option B

In favourable circumstances a 15 cm concrete cube after 28 days, attains a maximum crushing strength (A) 100 kg/cm2 (B) 200 kg/cm2 (C) 300 kg/cm2 (D) 400 kg/cm

Description : In favourable circumstances a 15 cm concrete cube after 28 days, attains a maximum crushing strength (A) 100 kg/cm2 (B) 200 kg/cm2 (C) 300 kg/cm2 (D) 400 kg/cm

Last Answer : Answer: Option D

An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is (A) 300 cm (B) 233 cm (C) 176 cm (D) 236 cm

Description : An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is ... breadth of the flange is (A) 300 cm (B) 233 cm (C) 176 cm (D) 236 cm

Last Answer : Answer: Option C

The 28 days cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be (A) Between 150 to 300 kg/cm2 (B) Between 350 to 600 kg/cm2 (C) Between 150 to 500 kg/cm2 (D) Below 200 kg/cm2

Description : The 28 days cube strength of mass concrete using aggregates of maximum size 5 cm for gravity dams should be (A) Between 150 to 300 kg/cm2 (B) Between 350 to 600 kg/cm2 (C) Between 150 to 500 kg/cm2 (D) Below 200 kg/cm2

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The plywoods do not split or crack due to changes in atmosphere (B) The commercial plywoods are available upto 150 cm wide and upto 300 cm long (C) The plywoods possess uniform tensile strength in all directions (D) All the above

Description : Pick up the correct statement from the following: (A) The plywoods do not split or crack due to changes in atmosphere (B) The commercial plywoods are available upto 150 cm wide and upto 300 cm long (C) The plywoods possess uniform tensile strength in all directions (D) All the above

Last Answer : Answer: Option D

The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 240 (b) 416 (c) 360 (d) 400

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 240 (b) 416 (c) 360 (d) 400

Last Answer : (b) 416

The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 200 (b) 240 (c) 360 (d) 416

Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 200 (b) 240 (c) 360 (d) 416

Last Answer : (d) 416

.The grating used to observe, diffraction of visible light can have approximately __________. A.300 lines per cm B.3000 lines per cm, C. 15000 lines per cm D. 30 lines per cm

Description : .The grating used to observe, diffraction of visible light can have approximately __________. A.300 lines per cm B.3000 lines per cm, C. 15000 lines per cm D. 30 lines per cm

Last Answer : C. 15000 lines per cm

The largest book, the super book, is ?? and weight is ?? General Knowledge Multiple Choice Quiz Questions A. 270 cm, 300 cm, 252 kg. B. 100 cm, 110 cm, 100 kg. C. 200 cm, 100 cm, 60 kg. D. None of these

Description : The largest book, the super book, is ?? and weight is ?? General Knowledge Multiple Choice Quiz Questions A. 270 cm, 300 cm, 252 kg. B. 100 cm, 110 cm, 100 kg. C. 200 cm, 100 cm, 60 kg. D. None of these

Last Answer : A. 270 cm, 300 cm, 252 kg.

The average height of 60 girls was calculated to be 300 cm. It was detected later that one value of 330 cm was wrongly copied as 270 cm for the computation of the mean. Find the correct mean. A) 301cm B) 300.5cm C) 307cm D) 311cm

Description : The average height of 60 girls was calculated to be 300 cm. It was detected later that one value of 330 cm was wrongly copied as 270 cm for the computation of the mean. Find the correct mean. A) 301cm B) 300.5cm C) 307cm D) 311cm

Last Answer : A) Calculated average height of 60 girls = 300cm. Incorrect sum of the heights of 60 girls = (300 60)cm = 18000 cm. Correct sum of the heights of 60 girls = (incorrect sum) - (wrongly copied item) ... 330) cm = 18060cm. Correct mean = correct sum/number of girls = (18060/60) cm = 301 cm.