Description : 1 BTU/hr.ft.°F is equal to __________ kcal/hr. m.°C. (A) 1.49 (B) 1 (C) 4.88 (D) None of these
Last Answer : (A) 1.49
Description : Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F
Last Answer : (C) 50 -100 BTU/hr. ft. 2°F
Description : Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the ... in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important
Last Answer : (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity
Description : The unit of heat transfer co-efficient is (A) BTU/hr. ft 2°F (B) BTU/hr. °F. ft (C) BTU/hr. °F (D) BTU/hr. ft
Last Answer : (A) BTU/hr. ft 2°F
Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000
Last Answer : (D) 5000-15000
Description : Melting point & boiling points of liquid oxygen are respectively - 218.8°C & - 183°C, while the same for liquid nitrogen is - 210°C & - 195.8°C respectively. The difference in melting points of liquid oxygen & liquid nitrogen is not equal to 8.8 (A) °C (B) °F (C) °K (D) °R
Last Answer : (B) °F
Description : What is the unit of thermal conductivity? (A) Kcal/hr. m2 °C (B) Kcal/hr.m.°C (C) Kcal/hr.m (D) Kcal/hr. °C
Last Answer : (B) Kcal/hr.m.°C
Description : One ton of refrigeration capacity is equivalent to the heat removal rate of (A) 50 kcal/hr (B) 200 BTU/hr (C) 200 BTU/minute
Last Answer : (C) 200 BTU/minute
Description : Optimum preheating temperature for pitch creosote mixture (PCM) which is also termed as C.T.F-200, before atomisation through burners is (A) 200 °F (B) 200 °C (C) 200 °K (D) 200 °R
Last Answer : (A) 200 °F
Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high
Last Answer : (B) Supersaturated
Description : Pick out the wrong statement: (A) With change in temperature, the radiant energy emitted by a black body remains unchanged (B) Absorptivity of a body approaches unity in case of diffuse reflection (C) Absorptivity of ... unity (D) Value of Stefan-Boltzmann constant is 4.876 10 -8 KCal/m2 .hr.°K4
Last Answer : (A) With change in temperature, the radiant energy emitted by a black body remains unchanged
Description : The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C
Last Answer : (C) 35°C
Description : In SI units, thermal conductivity is expressed in (A) Watt/m.°K (B) Watt/m2 . °K (C) Watt/m2 . °K (D) Watt/m4 . °K
Last Answer : (A) Watt/m.°K
Description : The unit of conductance in SI unit is (A) W/m (B) W/m2 (C) W/°K (D) W/m°K
Last Answer : (C) W/°K
Description : What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40
Last Answer : (A) 2
Description : The value of gas constant 'R' is (A) 1.987 cal/gm mole °K (B) 1.987 BTU/lb. mole °R (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B)
Description : Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface ... C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50
Last Answer : (C) 70
Description : Molar heat capacity of water in equilibrium with ice at constant pressure is __________ Kcal/kg mole. °K (A) 0 (B) ∞ (C) 50 (D) 100
Last Answer : (B) ∞
Description : Trouton's ratio is given by (where λb, = molal heat of vaporisation of a substance at its normal boiling point, kcal/kmol Tb = normal boiling point, °K) (A) λb/Tb (B) Tb/λb (C) √(λb/Tb) (D) √(Tb/λb)
Last Answer : (A) λb/Tb
Description : The value of Cp & Cv respectively for monatomic gases in Kcal/kg Mole.°K are (A) 5 & 3 (B) 3.987 & 1.987 (C) 1.987 & 0.66 (D) 0.66 & 1.987
Last Answer : A) 5 & 3
Description : Cp of a gas at its critical temperature and pressure (A) Becomes zero (B) Becomes infinity (C) Equals 1 kcal/kmol °K (D) Equals 0.24 kcal/kmol °K
Last Answer : (B) Becomes infinity
Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube
Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K
Description : One ton of refrigeration is not equivalent to the heat removal rate of (A) 200 BTU/minute (B) 50 kcal/minute (C) 50 kJ/sec (D) 3.5 KW
Last Answer : (C) 50 kJ/sec
Description : Energy Efficiency rating in BTU/hr/W is equal to a) 4.413 W/W b) 2.413 W/W c) 3.413 W/W
Last Answer : 3.413w/w
Description : Heat load in a cooling tower (A) Means the amount of heat thrown away (KCal/hr.) by the cooling tower (B) Is equal to the number of kg, of water circulated times the cooling range (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : The benchmarking parameter for a vapour compression refrigeration system is a) kW / kg of refrigerant used b) kcal / m3 of chilled water c) BTU / Ton of Refrigeration d) kW / Ton of Refrigeration
Last Answer : d) kW / Ton of Refrigeration
Description : The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ
Last Answer : (A) 3.6 AVS.ρ
Description : The cooling rate required to freeze 1 ton of water at 0°C into ice at 0°C in 24 hours is __________ BTU/hr. (A) 100 (B) 200 (C) 1000 (D) 2000
Last Answer : (B) 200
Description : Normal values of overflow rate for plain sedimentation tank using coagulants, is (A) 750 to 1000 litres/hr/m2 (B) 1000 to 1250 litres/hr/m2 (C) 1250 to 1500 litres/hr/m2 (D) 1500 litres/hr/m
Last Answer : (B) 1000 to 1250 litres/hr/m2
Description : Normal values of overflow rate for plain sedimentation tank, is (A) 250 to 500 litres/hr/m2 (B) 500 to 750 litres/hr/m2 (C) 750 to 1000 litres/hr/m2 (D) 1000 to 1250 litres/hr/m
Last Answer : (B) 500 to 750 litres/hr/m
Description : I am wondering if Frigidaire FAX054P7A 5000 BTU Window Air Conditioner will be sufficient for my 15 Ft by 10 Ft (total bedroom area 150 square feet) bedroom as far as adequate cooling is concerned?
Last Answer : The Frigidaire FAX054P7A is designed to cool a room up to 150 square feet, so your bedroom size is just at the limit of it's capacity. Assuming you aren't someone who gets exceptionally hot, this unit should work fine.
Description : A certain gas with cp = 0.529Btu/lb°R and R = 96.2ft/lbºR expands from 5 ft and 80ºF to 15 ft while the pressure remains constant at 15.5 psia. a. T2=1.620ºR, ∫H = 122.83 Btu b. T2 = 2°R, ∫H = 122.83 Btu c. ... , ∫H = 122.83 Btu d. T2 = 1°R, ∫H = 122.83 Btu T2= V2(t2)/V1 and ∫H = mcp (T2-T1)
Last Answer : T2=1.620ºR, ∫H = 122.83 Btu
Description : The relation between EER in BTU/hr/W EER in W/W is given as_________. A. EER in BTU/hr/W = 3.245 EER in W/W. B. EER in BTU/hr/W = 3.44 EER in W/W. C. EER in BTU/hr/W = 3.413 EER in W/W. D. EER in BTU/hr/W = 1.234 EER in W/W.
Last Answer : EER in BTU/hr/W = 3.413 EER in W/W.
Description : EER in BTU/hr/W = a) 3.222 * EER in W/W c) 3.413 * EER in W/W b) 3.234 * EER in W/W d) 3.400 * EER in W/W
Last Answer : 3.413 * EER in W/W
Description : We have defined EER by a) BTU/hr/W c) BTU/min/W b) BTU/sec/W d) BTU/hr/V
Last Answer : BTU/hr/W
Description : EER in BTU/HR/W = ______ X EER in W/W A. 3.410 C. 3.411 B. 3.412 D. 3.413
Last Answer : 3.413
Description : Calculate: a. Mass flow rate in lb/hr. b. The velocity at section 2 in fps a. 800,000lb/hr;625ft/s b. 900,000lb/hr;625 ft/s c. 888,000lb/hr;269 ft/s d. 700,000lb/hr;269 ft/s m = A1V!/V1
Last Answer : 900,000 lb/hr;625 ft/s
Description : In a heat exchanger, one transfer unit means (A) A section of the exchanger in which change in temperature of one stream equals the average driving force in the section (B) The size of the exchanger in which heat transfer rate is 1 kcal/hr (C) Both (A) and (B) (D) None of these
Last Answer : (A) A section of the exchanger in which change in temperature of one stream equals the average driving force in the section
Description : Rate of heat release in a furnace, which is the measure of heat intensity, is defined as (A) kcal/hr/m3 combustion space (B) kcal/m3 combustion space (C) kcal/hr (D) None of these
Last Answer : (A) kcal/hr/m3 combustion space
Description : Compound A is extracted from a solution of A + B into a pure solvent S. A Co-current unit is used for the liquid-liquid extraction. The inlet rate of the solution containing A is 200 moles of B/hr.m2 and the ... extraction achieved in the unit is (A) 25% (B) 50% (C) 70% (D) 90%
Last Answer : (B) 50%
Description : Unit of furnace loading is (A) Ton stock/hr/m2 hearth area (B) Ton stock/hr (C) Ton stock/m2 hearth area (D) Both (B) and (C)
Last Answer : (A) Ton stock/hr/m2 hearth area
Description : Unit of mass velocity is (A) kg/hr (B) kg/m2 . hr (C) kg/m2 (D) kg/m3 . hr
Last Answer : (B) kg/m2 . hr
Description : Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20
Last Answer : (B) 3 to 6
Description : Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500 (D) 4000 to 5000
Last Answer : (B) 100 to 200
Description : One tonrefrigeration corresponds to (a) 50 kcal/min (b) 50 kcal/kr (c) 80 kcal/min (d) 80 kcal/hr
Last Answer : Ans: a
Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000
Last Answer : 21600
Description : Screen capacity is expressed in terms of (A) tons/hr (B) tons/ft 2 (C) Both (A) & (B) (D) tons/hr-ft
Last Answer : (D) tons/hr-ft
Description : The variation of thermal conductivity of a metal with temperature is often correlated using an expression of the form K = K0 + at, where, K is the thermal conductivity and T is the temperature (in °K). The units of 'a' in SI system will be (A) W/m.k (B) W/m (C) W/m.k
Last Answer : (C) W/m.k
Description : A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of ... and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5
Last Answer : (B) 0.1
Description : Bob throws a rock striaght up at a velocity of 88 ft./s. What is the maxium height that the rock reaches?
Last Answer : See here on how to calculate this > http://www.ehow.com/how_8115675_calculate-height-velocity.html