How many feet does 4.6 mm equal?

How many feet does 4.6 mm equal?
by

1 Answer

Answer :

It is 0.0151 ft, approx.
by

Related questions

How many feet does 4.6 mm equal?

Description : How many feet does 4.6 mm equal?

Last Answer : It is 0.0151 ft, approx.

How many feet is 12.8 mm?

Description : How many feet is 12.8 mm?

Last Answer : 0.041 feets of 12.8mm

If a ski pole is 3.0 feet in length how long is the ski pole in mm?

Description : If a ski pole is 3.0 feet in length how long is the ski pole in mm?

Last Answer : Need answer

In 1953, Sir Edmund Hillary and Tenzing Norgay were the first people to reach the summit of Mount Everest from their last previously established camp at an altitude of 27,900 feet (barometric pressure about 220 mm). At that camp, water would have: w) boiled at 100 degrees Celsius x) boiled at 68 degrees Celsius y) not boiled at any temperature z) sublimed

Description : In 1953, Sir Edmund Hillary and Tenzing Norgay were the first people to reach the summit of Mount Everest from their last previously established camp at an altitude of 27,900 feet (barometric pressure ... degrees Celsius x) boiled at 68 degrees Celsius y) not boiled at any temperature z) sublimed

Last Answer : ANSWER: X -- BOILED AT 68 DEGREES CELSIUS

Pressure difference between two points in vessels, pipelines or in two different pipelines can be measured by a differential manometer. The pressure difference measured as the mm of water column in case of mercury-water, differential manometer is equal to (where, H = difference in height of mercury column in mm). (A) H (B) 12.6 H (C) 13.6 H (D) 14.6 H

Description : Pressure difference between two points in vessels, pipelines or in two different pipelines can be measured by a differential manometer. The pressure difference measured as the mm of water column in case of mercury-water, differential manometer is ... mm). (A) H (B) 12.6 H (C) 13.6 H (D) 14.6 H

Last Answer : (B) 12.6 H

A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that of brass bar is 3000 mm2 . These are subjected to a compressive load 100,000 N. If Eb = 0.2 MN/mm2 and Eb = 0.1 MN/mm2 , the stresses developed are: (A) b = 10 N/mm2s = 20 N/mm2(B) b = 8 N/mm2s = 16 N/mm2(C) b = 6 N/mm2s = 12 N/mm2(D) b = 5 N/mm2s = 10 N/mm

Description : A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that  of brass bar is 3000 mm2 . These are subjected to a compressive load 100,000 N. If Eb = 0.2  MN/mm2  and Eb = 0.1 ... 6 N/mm2 s  = 12 N/mm2 (D) b = 5 N/mm2 s  = 10 N/mm

Last Answer : (A) b = 10 N/mm2 s  = 20 N/mm

The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than (A) 4 mm (B) 5 mm (C) 6 mm (D) 7 mm

Description : The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than (A) 4 mm (B) 5 mm (C) 6 mm (D) 7 mm

Last Answer : Answer: Option D

Barometric pressure is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) 100mm Hg.

Description : Barometric pressure is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) 100mm Hg.

Last Answer : Answer : a

I kgf/cm2 is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) l00 mm Hg.

Description : I kgf/cm2 is equal to  (a) 760 mm Hg  (b) zero mm Hg  (c) 735.6 mm Hg  (d) 1 mm Hg  (e) l00 mm Hg.

Last Answer : Answer : c

A spring of stiffness 100 N/mm used in a spring-loaded safety valve of diameter 20 mm on a boiler with the pressure inside the boiler equal to 1 MPa should be initially compressed by a. 5mm b. 3.14 mm c. 2mm d. 6.28 mm

Description : A spring of stiffness 100 N/mm used in a spring-loaded safety valve of diameter 20 mm on a boiler with the pressure inside the boiler equal to 1 MPa should be initially compressed by a. 5mm b. 3.14 mm c. 2mm d. 6.28 mm

Last Answer : b. 3.14 mm

The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Description : The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Last Answer : a. 1.885 m/sec

Find the binding energy of an electron in the ground state of a hydrogen like atom in whose spectrum the third Balmer line is equal to 108.5 mm.

Description : Find the binding energy of an electron in the ground state of a hydrogen like atom in whose spectrum the third Balmer line is equal to 108.5 mm.

Last Answer : Find the binding energy of an electron in the ground state of a hydrogen like atom in whose spectrum the third Balmer line is equal to 108.5 mm.

How many mm does 3.1 cm equal?

Description : How many mm does 3.1 cm equal?

Last Answer : 31

One micron is equal to- (1) 1/10th of mm (2) 1/100th of mm (3) 1/1000th of mm (4) 1/10000th of mm

Description : One micron is equal to- (1) 1/10th of mm (2) 1/100th of mm (3) 1/1000th of mm (4) 1/10000th of mm

Last Answer : (3) 1/1000th of mm Explanation: In the U.S. the thickness of paint is expressed in mils (one mil equals 1/1000 of inch). The rest of the world expresses coating thickness in microns (1 micron = 1 millionth of a meter and 25.4 microns = .001” inch or 1 mil).

One micron is equal to- (1) 1/10th of mm (2) 1/100th of mm (3) 1/1000th of mm (4) 1/10000th of mm

Description : One micron is equal to- (1) 1/10th of mm (2) 1/100th of mm (3) 1/1000th of mm (4) 1/10000th of mm

Last Answer : (3) 1/1000th of mm Explanation: In the U.S. the thickness of paint is expressed in mils (one mil equals 1/1000 of inch). The rest of the world expresses coating thickness in microns (1 micron = 1 millionth of a meter and 25.4 microns = .001” inch or 1 mil).

A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Description : A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Last Answer : (3) 0.001 mm Explanation: 1 micron = 0.001 millimeters. A micrometre (micron) is one-millionth of a metre (or one-thousandth of a millimetre, 0.001 mm). Its unit symbol in the ... is a common unit of measurement for wavelengths of infrared radiation as well as sizes of cells and bacteria.

Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C.(A) 0.0001(B) 0.001(C) 0.01(D) 0.1

Description : Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C. (A) 0.0001 (B) 0.001 (C) 0.01 (D) 0.1

Last Answer : (B) 0.001

Smoke volatility index is equal to smoke point plus (A) 0.42 × (% distilled at 204°C) (B) 5 mm (C) 0.84 × (% distilled at 204°C) (D) 10 mm approximately

Description : Smoke volatility index is equal to smoke point plus (A) 0.42 × (% distilled at 204°C) (B) 5 mm (C) 0.84 × (% distilled at 204°C) (D) 10 mm approximately

Last Answer : (A) 0.42 × (% distilled at 204°C)

or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Description : or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (C) 500

1 torr is equal to A. 1 N⁄m² B. 1 mm Hg C. 1 bar D. All of the above

Description : 1 torr is equal to A. 1 N⁄m² B. 1 mm Hg C. 1 bar D. All of the above

Last Answer : 1 mm Hg

Angstrom (Å) is equal to (a) 0.01 mm (b) 0.001 mm (c) 0.0001 mm (d) 0.00001 mm

Description : Angstrom (Å) is equal to (a) 0.01 mm (b) 0.001 mm (c) 0.0001 mm (d) 0.00001 mm

Last Answer : (b) 0.001 mm

When measuring the blood pressure in each of the patient’s arms, the nurse recognizes that in the normal adult, the pressures a) differ no more than 5 mm Hg between arm pressures. Normally, in the absence of disease of the vasculature, there is a difference of no more than 5 mm Hg between arm pressures. b) must be equal in both arms. The pressures in each arm do not have to be equal in order to be considered normal. c) may vary 10 mm Hg or more between arms. Pressures that vary more than 10 mm Hg between arms indicate an abnormal finding. d) may vary, with the higher pressure found in the left arm. The left arm pressure is not anticipated to be higher than the right as a normal anatomical variant.

Description : When measuring the blood pressure in each of the patient's arms, the nurse recognizes that in the normal adult, the pressures a) differ no more than 5 mm Hg between arm pressures. Normally, in ... . The left arm pressure is not anticipated to be higher than the right as a normal anatomical variant.

Last Answer : a) differ no more than 5 mm Hg between arm pressures. Normally, in the absence of disease of the vasculature, there is a difference of no more than 5 mm Hg between arm pressures.

The compressive strength of 100 mm cube as compared to 150 mm cube is always (A) Less (B) More (C) Equal (D) None of the above

Description : The compressive strength of 100 mm cube as compared to 150 mm cube is always (A) Less (B) More (C) Equal (D) None of the above

Last Answer : Answer: Option B

The diameter of ties in a column should be (A) More than or equal to one fourth of diameter of main bar (B) More than or equal to 5 mm (C) More than 5 mm but less than one-fourth of diameter of main bar (D) More than 5 mm and also more than one-fourth of diameter of main bar

Description : The diameter of ties in a column should be (A) More than or equal to one fourth of diameter of main bar (B) More than or equal to 5 mm (C) More than 5 mm but less than one-fourth of diameter of main bar (D) More than 5 mm and also more than one-fourth of diameter of main bar

Last Answer : Answer: Option D

The value of 1 mm of Hg is equal to  A. 1.333 N/m2  B. 13.33 N/m2  C. 133.3 N/m2  D. 1333 N/m2

Description : The value of 1 mm of Hg is equal to  A. 1.333 N/m2  B. 13.33 N/m2  C. 133.3 N/m2  D. 1333 N/m2

Last Answer : Answer: C

For two plates of equal thickness, full strength of square-edged fillet weld can be ensured if its maximum size is limited to (a) 1.5 mm less than the plate thickness (b) 67% of the plate thickness (c) 80% of the plate thickness (d) Thickness of the plate

Description : For two plates of equal thickness, full strength of square-edged fillet weld can be ensured if its maximum size is limited to (a) 1.5 mm less than the plate thickness (b) 67% of the plate thickness (c) 80% of the plate thickness (d) Thickness of the plate

Last Answer : (a) 1.5 mm less than the plate thickness

Two concentric springs with stiffness equal to 100 N/mm and 80 N/mm respectively, when subjected to load of 900N will deflect by a. 9mm b. 11.25 mm c. 5mm d. 31.5 mm

Description : Two concentric springs with stiffness equal to 100 N/mm and 80 N/mm respectively, when subjected to load of 900N will deflect by a. 9mm b. 11.25 mm c. 5mm d. 31.5 mm

Last Answer : c. 5mm

A micron is equal to (1) 0.1 mm (2) 0.01 mm (3) 0.001 mm(4) 0.0001 mm

Description : A micron is equal to (1) 0.1 mm (2) 0.01 mm (3) 0.001 mm(4) 0.0001 mm

Last Answer : 0.001 mm