A micron is equal to (1) 0.1 mm (2) 0.01 mm (3) 0.001 mm(4) 0.0001 mm

A micron is equal to (1) 0.1 mm (2) 0.01 mm (3) 0.001 mm(4) 0.0001 mm
by

1 Answer

Answer :

0.001 mm
by

Related questions

A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Description : A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Last Answer : (3) 0.001 mm Explanation: 1 micron = 0.001 millimeters. A micrometre (micron) is one-millionth of a metre (or one-thousandth of a millimetre, 0.001 mm). Its unit symbol in the ... is a common unit of measurement for wavelengths of infrared radiation as well as sizes of cells and bacteria.

Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C.(A) 0.0001(B) 0.001(C) 0.01(D) 0.1

Description : Very low pressure is expressed in microns (μ), which is equal to__________ mm of Hg column (absolute) at 0°C. (A) 0.0001 (B) 0.001 (C) 0.01 (D) 0.1

Last Answer : (B) 0.001

Angstrom (Å) is equal to (a) 0.01 mm (b) 0.001 mm (c) 0.0001 mm (d) 0.00001 mm

Description : Angstrom (Å) is equal to (a) 0.01 mm (b) 0.001 mm (c) 0.0001 mm (d) 0.00001 mm

Last Answer : (b) 0.001 mm

A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Description : A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Last Answer : Answer: C

or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Description : or Indian standard (IS) screens, the mesh number is equal to its aperture size expressed to the nearest deca-micron (0.01 mm). Aperture width of IS screen of mesh number 50 will be approximately __________ microns. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (C) 500

What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.

Description : What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.

Last Answer : C. 0.635 to 15.24 cm

Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Description : Rotary vacuum pumps can reduce the absolute pressure to as low as __________ mm Hg. (A) 1 (B) 0.1 (C) 0.01 (D) 0.001

Last Answer : (C) 0.01

The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Description : The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm. (A) 0.001 (B) 0.01 (C) 0.002 (D) 0.02

Last Answer : Option C

What is 0.001 micron?

Description : What is 0.001 micron?

Last Answer : What is the answer ?

In a cycle the spark lasts roughly for A. 1 sec B. 0.1 sec C. 0.0001 sec D.001 sec

Description : In a cycle the spark lasts roughly for A. 1 sec B. 0.1 sec C. 0.0001 sec D.001 sec

Last Answer : ANSWER : C

One micron is equal to- (1) 1/10th of mm (2) 1/100th of mm (3) 1/1000th of mm (4) 1/10000th of mm

Description : One micron is equal to- (1) 1/10th of mm (2) 1/100th of mm (3) 1/1000th of mm (4) 1/10000th of mm

Last Answer : (3) 1/1000th of mm Explanation: In the U.S. the thickness of paint is expressed in mils (one mil equals 1/1000 of inch). The rest of the world expresses coating thickness in microns (1 micron = 1 millionth of a meter and 25.4 microns = .001” inch or 1 mil).

One micron is equal to- (1) 1/10th of mm (2) 1/100th of mm (3) 1/1000th of mm (4) 1/10000th of mm

Description : One micron is equal to- (1) 1/10th of mm (2) 1/100th of mm (3) 1/1000th of mm (4) 1/10000th of mm

Last Answer : (3) 1/1000th of mm Explanation: In the U.S. the thickness of paint is expressed in mils (one mil equals 1/1000 of inch). The rest of the world expresses coating thickness in microns (1 micron = 1 millionth of a meter and 25.4 microns = .001” inch or 1 mil).

Period of oscillation of 3 cm microwaves in seconds is (1) 1 x 10¹⁰ (2) 1 x 10⁻¹⁰ (3) 0.01 (4) 0.001

Description : Period of oscillation of 3 cm microwaves in seconds is (1) 1 x 10¹⁰ (2) 1 x 10⁻¹⁰ (3) 0.01 (4) 0.001

Last Answer : (2) 1 x 10⁻¹⁰ Explanation: The period of oscillation of 3 cm microwaves is 1 x 10^-10 (Physics, Volume 1, by Halliday). The period of oscillation is the smallest interval of time in which a system undergoing oscillation returns to the state it was in at the beginning of the oscillation.

The BCD equivalent of decimal 912 is ________. 60) A) 1001 0001 0010BCD B) 1001 1000 0001BCD C) 0111 1111 1110BCD D) 0010 001 1001BCD

Description : The BCD equivalent of decimal 912 is ________. 60) A) 1001 0001 0010BCD B) 1001 1000 0001BCD C) 0111 1111 1110BCD D) 0010 001 1001BCD

Last Answer : A) 1001 0001 0010BCD

In a number sequence what is 0.001 0.01 0.1 1?

Description : In a number sequence what is 0.001 0.01 0.1 1?

Last Answer : Each successive number is ten times the one before it.

What is the Next number in the sequence 0.001 0.01 0.1 1?

Description : What is the Next number in the sequence 0.001 0.01 0.1 1?

Last Answer : 10

Threshold limit value of copper in the atmospheric air is - (1) 0.001 mg/m3 (2) 0.01 mg/m3 (3) 1.0 mg/m3 (4) 5.0 mg/m3

Description : Threshold limit value of copper in the atmospheric air is - (1) 0.001 mg/m3 (2) 0.01 mg/m3 (3) 1.0 mg/m3 (4) 5.0 mg/m3

Last Answer : (3) 1.0 mg/m3 Explanation: Inspirable copper dust takes a predominantly fibrous effect. The ALV of copper aerosol in the workplace atmosphere is 0.5 mg/m3, while the threshold limit value (TLV) is 1.0 mg/m3.

Carbon content in steel is __________ percent. (A) 0.1-2 (B) 4-6 (C) 2-4 (D) 0.001-0.01

Description : Carbon content in steel is __________ percent. (A) 0.1-2 (B) 4-6 (C) 2-4 (D) 0.001-0.01

Last Answer : (A) 0.1-2

Maximum permissible residual chlorine in treated water should be __________ mg/litre. (A) 0.001 to 0.01 (B) 0.2 to 0.3 (C) 2 to 3 (D) 5 to 10

Description : Maximum permissible residual chlorine in treated water should be __________ mg/litre. (A) 0.001 to 0.01 (B) 0.2 to 0.3 (C) 2 to 3 (D) 5 to 10

Last Answer : (B) 0.2 to 0.3

The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Description : The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Last Answer : (A) 0.01

When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the permeability of the soil, is (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Description : When a constant discharge 2.91 litres/sec. was obtained in a pumping test, the draw downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m respectively. If over-all depth of the pumping well was 16 m, the ... (A) 0.0005 cm/sec (B) 0.001 cm/sec (C) 0.002 cm/sec (D) 0.01 cm/sec

Last Answer : Answer: Option B

The specific gravity of water is taken as (A) 0.001 (B) 0.01 (C) 0.1 (D) 1

Description : The specific gravity of water is taken as (A) 0.001 (B) 0.01 (C) 0.1 (D) 1

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes

Description : Pick up the incorrect statement from the following: (A) Dimensions are measured to the nearest 0.01 m (B) Areas are measured to the nearest 0.01 sq.m (C) Cubic contents are measured to the nearest 0.1 cum (D) Weights are measured to the nearest 0.001 tonnes

Last Answer : (D) Weights are measured to the nearest 0.001 tonnes

The time of closing the cycle, in modern circuit breakers is (a) 0.003 sec (b) 0.001 sec (c) 0.01 sec (d) 0.10 sec (e) none of the above

Description : The time of closing the cycle, in modern circuit breakers is (a) 0.003 sec (b) 0.001 sec (c) 0.01 sec (d) 0.10 sec (e) none of the above

Last Answer : (a) 0.003 sec

The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Description : The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Last Answer : a. 0.1

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Last Answer : C. 1.9 bit

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Last Answer : c. 1.9 bit

In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in

Description : In a transistor Colpitts oscillator, C1 = 0.001 µF, C2 = 0.01 µF and L = 5 µH. The frequency of oscillation in MHz will be (a) 2.37 MHz (b) 10.00 MHz (c) 11.54 MHz (d) 9.09 MHz 

Last Answer : c

Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Description : Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Last Answer : (B) 0.30

The opening of a 200 mesh screen (Taylor series) is (A) 0.0074 cm (B) 0.0074 mm (C) 0.0047 cm (D) 74 milli-micron

Description : The opening of a 200 mesh screen (Taylor series) is (A) 0.0074 cm (B) 0.0074 mm (C) 0.0047 cm (D) 74 milli-micron

Last Answer : (A) 0.0074 cm

The drag co-efficient for a bacterium moving in water at 1 mm/s, will be of the following order of magnitude (assume size of the bacterium to be 1 micron and kinematic viscosity of water to be 10 -6m2 /s). (A) 24000 (B) 24 (C) 0.24(D) 0.44

Description : The drag co-efficient for a bacterium moving in water at 1 mm/s, will be of the following order of magnitude (assume size of the bacterium to be 1 micron and kinematic viscosity of water to be 10 -6m2 /s). (A) 24000 (B) 24 (C) 0.24(D) 0.44

Last Answer : (D) 0.44

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular

Description : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular

Last Answer : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale ... (C) 0.053 cm (D) 0.529 cm

1 micron how many mm ?

Description : 1 micron how many mm ?

Last Answer : 1 micron = 1/1000 mm.

The size of an atom is of the order of one (A) °Angstrom (B) Fermi (C) Micron (D) mm

Description : The size of an atom is of the order of one (A) °Angstrom (B) Fermi (C) Micron (D) mm

Last Answer : (A) °Angstrom

1 Micron is equal to – (1) 10⁻⁹ m (2) 10⁻¹² m (3) 10⁻⁶ m (4) 10⁻¹⁵ m

Description : 1 Micron is equal to – (1) 10⁻⁹ m (2) 10⁻¹² m (3) 10⁻⁶ m (4) 10⁻¹⁵ m

Last Answer : (3) 10⁻⁶ m Explanation: The micrometer or micron, is an SI derived unit of length equaling 1 x 10-6 of a metre, i.e., one millionth of a metre. It is a common unit of ... for wavelengths of infrared radiation as well as sizes of cells and bacteria and is commonly used in plastics manufacturing.

Hazen’s formula VS = 418 (GS – Gw)d [(3T + 70)/100] is used for the settlement velocity of the particles of diameter A. Less than 0.01 mm B. Less than 0.05 mm C. Less than 0.1 mm D. Greater than 0.1 mm

Description : Hazen’s formula VS = 418 (GS – Gw)d [(3T + 70)/100] is used for the settlement velocity of the particles of diameter A. Less than 0.01 mm B. Less than 0.05 mm C. Less than 0.1 mm D. Greater than 0.1 mm

Last Answer : ANS: D

The diameter of very fine sand particles is- (a) Below 0.002 mm (b) 0.05-0.002mm (c) 0.01-0.05 mm (d) 0.05-0.10mm

Description : The diameter of very fine sand particles is- (a) Below 0.002 mm (b) 0.05-0.002mm (c) 0.01-0.05 mm (d) 0.05-0.10mm

Last Answer : (c) 0.01-0.05 mm

1 micron is equal to ___________ meter(s). A. 10-6m B. 10-3 m C. 106 m D. 109 m

Description : 1 micron is equal to ___________ meter(s). A. 10-6m B. 10-3 m C. 106 m D. 109 m

Last Answer : A. 10-6m

An octal number 237 is equal to the binary number 1) 010 011 111 2) 010 111 011 3) 011 101 101 4) 011 000 001

Description : An octal number 237 is equal to the binary number 1) 010 011 111 2) 010 111 011 3) 011 101 101 4) 011 000 001

Last Answer : 3) 011 101 101

The group index for a soil, whose liquid limit is 40 percent, plasticity index is 10 percent and percentage passing 75 micron IS sieve (A) 0 (B) 3 (C) 5 (D) 7

Description : The group index for a soil, whose liquid limit is 40 percent, plasticity index is 10 percent and percentage passing 75 micron IS sieve (A) 0 (B) 3 (C) 5 (D) 7

Last Answer : Answer: Option A

What is 0.0001 in exponential form?

Description : What is 0.0001 in exponential form?

Last Answer : Feel Free to Answer

How do you write 0.0001 in sceintific notation?

Description : How do you write 0.0001 in sceintific notation?

Last Answer : 0.0001

How much is 0.0001 Bitcoin in naira?

Description : How much is 0.0001 Bitcoin in naira?

Last Answer : This Free course video help you to mine Bit coin Fastly #money #cryptocurrency Please Retweet This post🠍And Like 🠇 🠇 🠇 🠇 🠇 🠇 🠇 🠇 Just remove Space it's Your Link ... on the consistently diagrams of USS4,748 It's About Time For You To Follow The Right Strategies To Profit F

A total permanent deformation of 0.0001 of the ball diameter is taken for considering the static load capacity of the sh (a) True (b) False

Description : A total permanent deformation of 0.0001 of the ball diameter is taken for considering the static load capacity of the sh (a) True (b) False

Last Answer : (a) True

A total permanent deformation of 0.0001 of the ball diameter is taken for considering static load capacity of the shaft. a) True b) False

Description : A total permanent deformation of 0.0001 of the ball diameter is taken for considering static load capacity of the shaft. a) True b) False

Last Answer : a) True

What is the MSD and LSD of the following numbers (a) 420. (b) 1045.06 (c) 0.0024 (d) 247.0001

Description : What is the MSD and LSD of the following numbers (a) 420. (b) 1045.06 (c) 0.0024 (d) 247.0001

Last Answer : a) MSD - 4, LSD - 0 (b) MSD - 1, LSD - 6 (c) MSD - 2, LSD - 4 (d) MSD - 2, LSD - 1

Convert the decimal number 0.0625 to binary. 100) A) 0000.0111 B) 0000.1110 C) 0000.0011 D) 0000.0001

Description : Convert the decimal number 0.0625 to binary. 100) A) 0000.0111 B) 0000.1110 C) 0000.0011 D) 0000.0001

Last Answer : D) 0000.0001

Which binary value equals 2-1? 61) A) 1.0000 B) 0.0010 C) 0.0001 D) 0.1000

Description : Which binary value equals 2-1? 61) A) 1.0000 B) 0.0010 C) 0.0001 D) 0.1000

Last Answer : D) 0.1000

Why do some people have an apoplectic fit if a deli counter item is 0.001 lbs over?

Description : Why do some people have an apoplectic fit if a deli counter item is 0.001 lbs over?

Last Answer : answer:Because some folks have lost what they believed was ‘control’ in their life and compensate for it with shit like that. It’s simple deli tantrums at first but before you know it, if left unchecked, the same people start bombing abortion clinics and want to burn books . . .