What is combine operation? Give two examples of combined operations.

What is combine operation? Give two examples of combined operations.
by

1 Answer

Answer :

Combined Operation:

1. In order to save the operation and setting time of part, while the part is subjected to machining process, the different operations to be performed are combined together or arranged one after the other, during one setting of the part.

2. This combination process helps not only in saving the setting time but also the accuracy of the operation.

3. The operations can be combined in two ways

I. Simulation method: Operations combined together and performed simultaneously.

II. Integration method: Operations to be performed combined together in one setting but arranged one after other.

Examples:

1. Simulation Method: Gang milling operations, Straddle milling operation, slot making operations on CNC machining centers etc.

2. Integration Method: Operation on turret lathe, multi spindle automats, CNC operations etc.
by

Related questions

State the advantages and disadvantages of combined operations.

Description : State the advantages and disadvantages of combined operations. 

Last Answer : combined operation:- if the number of operations are combined in one setting it is possible to reduce the production time and the operations can be performed with more accuracy. Advantages of ... More costly set up 3) Trained operators are necessary 4) Sometimes special machines are needed 

State and explain how the different operations can be combined?

Description : State and explain how the different operations can be combined?

Last Answer : Combined Operation: In order to save the operation and setting time of part, while the part is subjected to machining process, the different operations to be performed are combined together or ... on turret lathe, multi spindle automats, CNC operations etc. are the example of Integration method 

Prepare operation process sheet and decide sequence of operation for the component shown in Figure No. 1. Assume suitable material and cutting conditions.

Description : Prepare operation process sheet and decide sequence of operation for the component shown in Figure No. 1. Assume suitable material and cutting conditions.

Last Answer : Operation Sheet with correct sequence of operations for the above given component by assuming suitable material and cutting conditions is as shown in below table;

How inspection stages are determined? State the significance of operation sheet.

Description : How inspection stages are determined? State the significance of operation sheet.

Last Answer : Following points taken into considerations for determine stages of inspection. 1. Type of production system. i.e. Job, batch or mass etc. 2. Nature of product i.e. complex which consist of more number ... sheet is one of the activity in the process plan, it helps to get a systematic process plan.

State the information required to determine operation sequence.

Description : State the information required to determine operation sequence.

Last Answer : Following information required to determine operation sequence; 1. Specification of raw material. 2. Specification of final product. 3. Time availability for dispatch. 4. Types of machine available. 5 ... 8. Plant layout. 9. Quantity to be manufactured. 10. Tolerance and accuracy.

State the importance of operation sheet. How will it help you to improve process planning?

Description : State the importance of operation sheet. How will it help you to improve process planning?

Last Answer : Importance of operation Sheet: [1] A process planning used in the routing which is also known as Route Sheet, Process Sheet or Operation Sheet. [2] It consists of details of operations, sequences, types ... to determine the efficiency of a work centre. [6] It helps to trace the material movement.

Compare Job and Batch production system with respect to: (1) Equipments (3) Investment (2) Labor (4) Examples of Products.

Description : Compare Job and Batch production system with respect to: (1) Equipments (3) Investment (2) Labor (4) Examples of Products.

Last Answer : Difference between Job and Batch Production System with respect to following parameters:

What is end effector? Give its classification

Description : What is end effector? Give its classification 

Last Answer : In robotics, an end effector is a device or tool that's connected to the end of a robot arm where the hand would be. The end effector is the part of the robot that interacts with the ... designed. Classification:- i) Mechanical clamping ii) Magnetic clamping iii) Vocum (suction) gripping

What is group technology? Give its applications.

Description : What is group technology? Give its applications.

Last Answer : Group technology is based on the general principle that many problems are similar and by grouping similar problems single solution can be found to a set of problems thus saving time and efforts. ... is used for manufacturing in automobile industry, fast food chains, doctors and dentists etc.  

Give classification of robot sensor.

Description : Give classification of robot sensor. 

Last Answer : Classification of Robot Sensor: Robot Sensors senses and capability includes vision and hand eye coordination, touch, hearing, sensors will divided into the following categories.  [1] Vision Sensor: ... and the stored vocabulary word the robot performs some actions which correspond to the word. 

List down the different types of production system in industry and give practical example of each type of production system.

Description : List down the different types of production system in industry and give practical example of each type of production system.

Last Answer : Types of Production system.  1. Intermittent production a. Job order production system: Examples - Repair shops, fabricators, Special purpose machine manufacturer industries, Civil works etc. ... production: Examples - Sugar industry, Steel industry, Cement industry, Paper industry etc.

Give the classifications of sensors used in robots.

Description : Give the classifications of sensors used in robots.

Last Answer : Classification of Robot Sensor: Robot Sensors senses and capability includes vision and hand eye coordination, touch, hearing, sensors will divided into the following categories.  [1] Vision Sensor: ... and the stored vocabulary word the robot performs some actions which correspond to the word.

Explain the concept of AGV? State it’s any two applications.

Description :  Explain the concept of AGV? State it’s any two applications. 

Last Answer : AGV is the battery operated programmed vehicle, used to carry load from one location to another by following a prescribed path around the manufacturing floor. It is a driverless vehicle, ... System) 2) AGV material handling system is very suited to computer integrated manufacturing system  

Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Description : Enlist any four factors which affect selection of material handling system. Explain which type of material handling system is suitable for: (i) Unloading two wheelers from truck ii) Stacking of pallets in store racks.

Last Answer : Four Factors affecting Selection of Material Handling System: [1] Adaptability and Flexibility [2] Type of Material to be handled [3] Type of Layout [4] Type of Production [5] ... [11] Cost of installation and handling Suitable Material Handling Devices for Following Activities:

Draw the layout of two wheeler service station. Justify the type of layout you have adopted.

Description : Draw the layout of two wheeler service station. Justify the type of layout you have adopted.

Last Answer : Layout of Two Wheeler Service Station: [1] The major factors considered for service station, is an impact of location on sales and services and customer satisfaction. [2] Customers usually look about how close ... a process type of layout and they are assembled using product type of layout.

Explain any two clamping devices with neat sketch

Description : Explain any two clamping devices with neat sketch

Last Answer : [1] Screw clamp:- It is particularly useful when a component is to be gripped on its edges. This arrangement insures easy machining of top surface of work piece. [2] Equalizing clamp: - It ... is operated by simply actuating the handle up or down which locks or unlocks the strap with the work.

Describe any two types of joints used in robotic arm and wrist

Description : Describe any two types of joints used in robotic arm and wrist

Last Answer : [1] Rotational joint [2] Linear joint [3] Twisting joint [4] Orthogonal & [5] Revolving joint Rotational Joint:Rotational joint can also be represented as R - Joint. This type will allow the ... the rotational axes. As like twisting joint, the output link spins about the input link.

Describe any two joint types used in Robotic arm and wrist.

Description : Describe any two joint types used in Robotic arm and wrist.

Last Answer : Joint types used in robotic arm: 1) Linear Joint or Prismatic joint: The linear joint provides the translational sliding motion between the input and output link. The axes of the links are parallel ... to the axis of rotation of the joint. The revolving joint is shown in fig.(e)

Explain with neat sketch any two material handling devices used in mass production.

Description : Explain with neat sketch any two material handling devices used in mass production.

Last Answer : 1.Roller conveyors may be gravity aided or powered and are employed for transporting products having flat bottoms. Bigger jobs can be handled as they are, whereas small items are put in boxes, tins ... and unloading of the products.   4.Screw Conveyor, Pneumatic Conveyor, Elevated Conveyor . 

Describe any two joints types used in robotics arms and wrist

Description : Describe any two joints types used in robotics arms and wrist 

Last Answer : Joint used in robotics arm: 1) Linear Joint or Prismatic joint: The linear joint provides the translational sliding motion between the input and output link. The axes of the links are parallel to one ... the axis of rotation of the joint. The revolving joint is shown in fig.(e)

Explain the procedure of measurement of productivity? Discuss any two techniques.

Description : Explain the procedure of measurement of productivity? Discuss any two techniques.

Last Answer : Productivity Measurement: [1] Measurement plays an important role in management of productivity. It helps to determine organization is progressing well or not. It also provides information on how effectively and ... give us the productivity of an entire organization or even a nation.

List the different actuators. Explain any two types of actuators with advantages and disadvantages

Description : List the different actuators. Explain any two types of actuators with advantages and disadvantages

Last Answer : Actuators [1] Hydraulic Actuator [2] Electrical Actuator [3] Pneumatic Actuator [4] Mechanical Actuator Hydraulic Actuator According to Pascal, when there is an increase in ... efficiency Disadvantages [1] Requires more power [2] Possibilities of fire hazards / accidents

Enlist types of joints used in robotic arm and draw sketch of any two

Description : Enlist types of joints used in robotic arm and draw sketch of any two

Last Answer : Types of Joints [1] Linear Joint or Prismatic joint [2] Orthogonal Joint [3] Rotational joint [4] Twisting Joint [5] Revolving joint

Construct a two handed process chart for an activity of replacing old refill from the ball pen with summary.

Description :  Construct a two handed process chart for an activity of replacing old refill from the ball pen with summary.

Last Answer : Two handed process chart Date of charting – 20/11/2019 Activity- Replacing old refill from ball pen charted by - XYZ Chart begins – both hands free before activity Chart ends – both hands free after activity Summary

From which of the following is robot programming language. (A) VAL (B) AML(C) ABD (D) Both (A) & (B)

Description : From which of the following is robot programming language. (A) VAL (B) AML (C) ABD (D) Both (A) & (B)

Last Answer : D

____ grippers are used to transfer ferrous material. (A) Magnetic grippers (B) Mechanical grippers (C) Adhesive grippers (D) Vacuum cup grippers

Description : ____ grippers are used to transfer ferrous material. (A) Magnetic grippers (B) Mechanical grippers (C) Adhesive grippers (D) Vacuum cup grippers

Last Answer : A

____ grippers are used to pick up light weight materials such as paper,cloth etc. (A) Mechanical grippers (B) Adhesive grippers (C) Vacuum cup grippers (D) Magnetic grippers

Description : ____ grippers are used to pick up light weight materials such as paper,cloth etc. (A) Mechanical grippers (B) Adhesive grippers (C) Vacuum cup grippers (D) Magnetic grippers

Last Answer : B

From which of the following is the type of robot. (A) Point to point robots (B) Continue path robot (C) Jointed arm robots (D) All of the above

Description : From which of the following is the type of robot. (A) Point to point robots (B) Continue path robot (C) Jointed arm robots (D) All of the above

Last Answer : D

Grippers are used to_____. (A) Hold the objects (B) Sense the objects (C) Move the objects (D) Both (A) & (C)

Description : Grippers are used to_____. (A) Hold the objects (B) Sense the objects (C) Move the objects (D) Both (A) & (C)

Last Answer : D

The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Description : The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Last Answer : A

The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Description : The capacity of robot to carry load is known as_____. (A) Load carrying capacity (B) Work envelope (C) Maximum reach (D) None of the above

Last Answer : C

The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Description : The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Last Answer : C

Which is also known as work volume of robot. (A) Work envelope (B) Speed of movement(C) Load carrying capacity (D) Precision of movement

Description : Which is also known as work volume of robot. (A) Work envelope (B) Speed of movement(C) Load carrying capacity (D) Precision of movement

Last Answer : A

From which of the following is benefit of robot. (A) Variety of task (B) Computer control (C) Repetitive task (D) All of the above

Description : From which of the following is benefit of robot. (A) Variety of task (B) Computer control (C) Repetitive task (D) All of the above

Last Answer : D

Which is area of engineering and science which understand the different principles, structure and programming of robot. (A) Mechatronics (B) Robotics (C) Aeronautics (D) None of the above

Description : Which is area of engineering and science which understand the different principles, structure and programming of robot. (A) Mechatronics (B) Robotics (C) Aeronautics (D) None of the above

Last Answer : B

How ‘5s’ can be used as inventory reduction technique?

Description : How ‘5s’ can be used as inventory reduction technique? 

Last Answer : By applying 5S in industry to systematically results- Total organization, cleanliness and standardization in work piece. Well organized workplace. More efficient workplace. More ... of waste & making cleanliness  4. SEIKETSU means standardizing 5. SHITSUKE means self discipline 

What allowances are considered while calculating standard time?

Description : What allowances are considered while calculating standard time? 

Last Answer : following types of allowances are considered while calculating standard time. 1) Relaxation allowance a) Personal need allowance b) Fatigue allowance i) Basic fatigue allowance ii) Variable ... 2) Contingency allowance 3) Special allowance 4) Process allowance 5) Interference allowance

Explain various Robot configurations with neat sketch.

Description : Explain various Robot configurations with neat sketch. 

Last Answer : Different Robot Configurations: Robots are being classified on the basis of their physical configuration and control systems adopted. These classifications are briefly described as below: [1] ... direction for vertical insertion tasks. It is basically used for the assembly purpose.

Explain in brief the allowances to be considered while estimating the standard time.

Description : Explain in brief the allowances to be considered while estimating the standard time.

Last Answer : Allowances to be considered while estimating the Standard Time: Allowances are added to the normal time in order to arrive at standard time. It is impossible to work throughout the day even ... under exceptional circumstances. It is used with utmost care and only in clearly defined circumstances.

State advantages and disadvantages of ERP System.

Description : State advantages and disadvantages of ERP System. 

Last Answer : Advantages of ERP System: [1] Improved efficiency across business due to timely availability of information. [2] Better decision making owing to information integration. [3] Reduced inventory costs due ... [9] Lack of support from the ERP vendor, consultancy firm or the hardware vendor.

What is ejector? Explain role and necessity of ejector in the design of jigs and fixtures.

Description : What is ejector? Explain role and necessity of ejector in the design of jigs and fixtures.

Last Answer : Ejector: Ejector is used to remove the work piece from close fitted locators and is present behind the work piece. Ejector speed up the operation by reducing unloading time. This increases the ... [6] The combined mechanism used in Ejectors can be powered hydraulically or by compressed air. 

State the functions of production planning.

Description : State the functions of production planning.

Last Answer : Function of Production Planning: Production planning is the determination, acquisition and arrangement of all facilities necessary for future production of products. It performs following functions; [1] To ... ; D. [4] To efficiently utilize the available resources and plant facilities.

Explain the concept of JIT and how does it help the manufacturing system to improve productivity?

Description : Explain the concept of JIT and how does it help the manufacturing system to improve productivity?

Last Answer : Concept of JIT: [1] JIT is a Production methodology which aims to improve overall productivity through elimination of waste and which leads to improved quality. [2] JIT concept was ... ] It improves customer satisfaction [14] It improves working condition and relation between employees. 

Explain the importance of ‘5S’ (“Five S”) Concept.

Description : Explain the importance of ‘5S’ (“Five S”) Concept.

Last Answer : Introduction of 5 S Concept: [1] 5S is a process of workplace organization and housekeeping which is carried out gradually and systematically. [2] It is a structured program to implement workplace ... In fact, 5S is a basic step in a journey towards Total Quality Management (TQM).

What are the different types of Fixtures? Explain any one with sketch.

Description : What are the different types of Fixtures? Explain any one with sketch.

Last Answer : Types of Fixtures: Following are the types of Fixtures according to the type of machine operations for which they are used. [1] Lathe (Turning) Fixture [2] Milling fixtures  [3] Grinding ... relative to the tool of the machine table and guide the broaching tool in relation to the job. 

Explain the principle of working of hydraulic actuator and state its advantages.

Description : Explain the principle of working of hydraulic actuator and state its advantages.

Last Answer : Working Principle of Hydraulic Actuator  1. According to Pascal, when there is an increase in pressure at any point in a confined incompressible fluid, then there is an equal increase at every point in ... better performance than others. 3. Power to weight ratio of these actuators is high.

List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Description : List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Last Answer : List of Types of clamping devices used in design of jigs. i. Screw clamp ii. Pivoted clamp. iii. Equalizing clamp. iv. Latch clamp. v. Wedge clamp. vi. Hinged jaw clamp. ... to be gripped on its edges as shown in figure. This arrangement ensures easy machining of the work piece 

Explain the following terms in context with work study.

Description : Explain the following terms in context with work study.

Last Answer : i. Therbligs. ii. MTM (Method Time Measurement)  Therbligs :  1. Therbligs are used to describe the basic element of movement or fundamental hand motions of the work cycle. 2. Every ... sum of these motion times is the time an operator of average skill would take to perform the task.

State the various stages at which inspection should be planned.

Description : State the various stages at which inspection should be planned. 

Last Answer : Stages of inspection: 1. Inspection of incoming materials, raw materials or received materials including bought out items. 2. In process inspection: It includes following stages; a. ... on completed assemblies under conditions similar to field conditions.  3. Inspection of finished goods.

Explain the need and importance of material handling devices in an industry.

Description : Explain the need and importance of material handling devices in an industry. 

Last Answer : Need of material handling devices: Material handling is an important activity in the industries. A large part of indirect labour employed in an industry is engaged in handling of materials. It has ... material handling and provides proper working conditions. 6. Reduced in process inventory.