Write two applications of clipper and two of clamper.

Write two applications of clipper and two of clamper.
by

1 Answer

Answer :

Application of Clipper: 

 In the case of generating new waveforms and/or shaping the existing older waveforms.

 Clippers can be used as freewheeling diodes in protecting the transistors from transient effects by connecting the diodes in parallel with the inductive load.

 Commonly used in power supplies.

 In the separation of synchronizing signals existing from the composite color picture signals.

 Frequently used in FM transmitters for removing the excess ripples in the signals above a certain noise level.

Application of Clamper: 

 Clampers can be frequently used in removing the distortions and identification of polarity of the circuits.

 For improving the reverse recovery time, clampers are used.

 Clamping circuits can be used as voltage doublers and for modelling the existing waveforms to a required shape and range.

 Clampers are widely used in test equipments and other sonar systems.

 The complex transmitter and receiver circuitry of television clamper is used as a base line stabilizer to define sections of the luminance signals to preset levels.

 Clampers are also called as direct current restorers as they clamp the wave forms to a fixed DC potential.
by

Related questions

List two applications of i) clipper ii) clamper.

Description : List two applications of i) clipper ii) clamper.

Last Answer : Clipper:  1. Diode clamp 2. wave shaping circuits 3. Clippers can be used as voltage limiters and amplitude selectors. Clamper:  1. Voltage Multipliers 2. For the protection of the ... can be used for removing the distortions 4. For improving the overdrive recovery time clampers are used.

Compare clipper and clamper

Description : Compare clipper and clamper

Last Answer : Sr. No Parameter Clipper Clamper 1 Components used Diode, Resistors  Diode, Capacitors, Resistors 2 Function To remove a part of input waveform To add a DC ... Application Diode clamp, wave shaping circuits  Voltage Multipliers  5 Configuration

Define clipper and clamper.

Description : Define clipper and clamper.

Last Answer : Clipper: The circuit with which the waveform is shaped by removing (or clipping) a portion of the applied wave is known as a clipper.  Clamper: A circuit that shifts either positive or negative peak ... a clamping circuits or clamper. These circuits are also called D.C. restorer or D.C. inserter

Draw and describe working of positive clamper.

Description : Draw and describe working of positive clamper.

Last Answer : Diagram- Operation In the first negative half cycle after turning on the circuit, the diode acts as a closed switch and charges the capacitor to peak input voltage Vm with the polarities. In all the ... Vo as,  This shows that the clamper adds a positive DC shift. Waveform

Describe working of negative clamper circuit with neat diagram and waveform.

Description : Describe working of negative clamper circuit with neat diagram and waveform.

Last Answer : Working: In the first positive half cycle the capacitor will charge through the forward biased diode to peak voltage Vm as shown in circuit. Charging takes place very quickly as the ... reverse biased and stop conducting. Negative clamper adds a negative DC shift as shown in waveform.

Draw negative clamper circuit and explain its working.

Description : Draw negative clamper circuit and explain its working. 

Last Answer : Diagram: Working: During the positive half cycle of the input AC signal, the diode is forward biased and hence no signal appears at the output. In forward biased condition, the diode allows ... - 2Vm} which have the same polarity with each other. As a result, the signal shifted downwards. 

Draw the clipper circuit using series and shunt diode.

Description : Draw the clipper circuit using series and shunt diode.

Last Answer : Fig: A series negative clipper (OR) Fig: Series positive clipper Fig: Parallel positive clipper (OR) Fig: Parallel negative clipper

With help of circuit diagram and waveform, explain working of positive series clipper.

Description : With help of circuit diagram and waveform, explain working of positive series clipper.

Last Answer : Series Clipper (Positive):-   Working: For positive cycle the diode D is reverse biased. Hence there is no voltage across the load RL While for negative half wave, the diode D is forward biased. Hence ... positive cycle of the input voltage gets clipped off. Input & o/p wave form:-   

Draw and explain the working of combinational Clipper with waveforms.

Description : Draw and explain the working of combinational Clipper with waveforms.

Last Answer : Explanation:- As shown in figure the combinational clipper is the combination of positive biased and negative biased clipper. The combinational clipper can be used to clip both two independent ... open circuit. Hence the value of output voltage cannot exceed the voltage level of VB2. 

Define clipper. Draw circuit of negative shunt clipper.

Description : Define clipper. Draw circuit of negative shunt clipper.

Last Answer : Clipper: A clipper is a device designed to prevent the output of a circuit from exceeding a predetermined voltage level without distorting the remaining part of the applied waveform. OR Clipper: An ... the positive or negative peak or both from a specific level is known as clipper.

Draw and describe working of series biased clipper with input output waveforms.

Description : Draw and describe working of series biased clipper with input output waveforms. 

Last Answer : Biased series positive clipper: Clipping of the signal takes place as soon as the input signal goes positive. If we want to change/adjust the clipping level of AC voltage, then external biasing voltage must be ... voltage must be used. The figure given below shows a biased (series) clipper.    

Write two applications of P-N junction diode and zener diode.

Description : Write two applications of P-N junction diode and zener diode. 

Last Answer : Application of P-N junction diode: Used in rectifier circuit Used in clipping and clamping circuit. Used for A.M detection Used for voltage multiplier. Application of Zener diode: It is ... . Used in protection circuits for MOSFET. Used in pulse amplifier. Used in clipping circuits.

Draw the characteristics of tunnel diode and write two applications of it.

Description : Draw the characteristics of tunnel diode and write two applications of it.

Last Answer :  Characteristics:  Applications: 1. In the digital networks 2. As a high speed switch 3. As a high frequency oscillator 4. High speed computers

Write working principle of photodiode and state its two applications.

Description : Write working principle of photodiode and state its two applications.

Last Answer : Working principle of photodiode:   Working principle: A photodiode is a PN- junction diode that consumes light energy to produce electric current. Sometimes it is also called as photo- ... Optical remote control Smoke detectors Flame detectors Intruder alert security system 

Write two applications of i) LED ii) photodiode.

Description : Write two applications of i) LED ii) photodiode.

Last Answer : LED:   1. In the opto- couplers.  2. In the infrared remote controls.  3. As indicators in various electronic circuits.  4. In seven segment and alphanumeric displays.  5. In optical switching ... As photo (light) detector.  5. In light intensity meters.  6. In the object counting system. 

Write the specifications of linear and non- linear potentiometers. State its applications

Description : Write the specifications of linear and non- linear potentiometers. State its applications

Last Answer : Specifications of linear & nonlinear potentiometers:  1. Ohmic range: 10Ω to 125 kΩ 2. Power rating : 100watt to 200 watt 3. Tolerance :  2% 4. Voltage Rating: 5V-500V 5. Operating ... 7. Used as potential dividers. 8. It is used for panel control in receivers, function generator etc 

List two applications of LDR.

Description : List two applications of LDR.

Last Answer : 1. It is used for automatic contrast of brightness control in television receivers. 2. It is used as a proximity switch. 3. It is used in the street light control circuits. 4. It is used in the ... security alarms. 9. It is used in the smoke detectors. 10. It is used in the infrared astronomy.

Draw the construction diagram of air core inductor. List two applications

Description : Draw the construction diagram of air core inductor. List two applications

Last Answer : Applications: i. It is used for construction of IF and RF tuning coils. ii. It is used for interstage coupling.

Draw the characteristics of tunnel diode, showing operating regions. State two applications of tunnel diode.

Description : Draw the characteristics of tunnel diode, showing operating regions. State two applications of tunnel diode.

Last Answer : Applications: One of the important application of a tunnel diode is in high speed computers where the switching times in the order of nanoseconds or picoseconds are desirable. A tunnel diode can be ... In digital networks. 2. As a high speed switch. 3. As a high frequency oscillator.

What is magnetic material ? State it’s two applications.

Description : What is magnetic material ? State it’s two applications.

Last Answer : Magnetic materials are those materials that can be either attracted or repelled when placed in an external magnetic field and can be magnetized themselves. OR The materials which provide path to ... . Applications: 1.Floppy disc ,hard disc  2.Motors and generators  3.Biomedical equipment

List any two applications of photo diode and IRLED

Description : List any two applications of photo diode and IRLED 

Last Answer : Photodiode 1. In the cameras for sensing the light intensity. 2. In CD players. 3. In the fiber optic receiver. 4. As photo (light) detector. 5. In light intensity meters. 6. In the ... shaft encoders 4. As a light source in optical fiber system 5. In the burglar alarm system.

List any two applications of Schottkey diode.

Description : List any two applications of Schottkey diode.

Last Answer : Application of Schottky diode: • It is used in rectification of very high frequency signals. • It is used in communication system circuits. • It is used in AC to DC converters. • It is used in Radar system. • It is used in switched mode power supply. 

State four applications of PIN diode.

Description : State four applications of PIN diode. 

Last Answer : i. Used in rectifier circuit. ii. Used in clipping and clamping circuit. iii. Used for A.M detection. iv. Used for voltage multiplier.

List applications of Schottky diode and Laser diode.

Description : List applications of Schottky diode and Laser diode.

Last Answer : Application of Schottky diode:  It is used in rectification of very high frequency signals. It is used in communication system circuits. It is used in AC to DC converters. It is used in Radar ... etc. It is used in welding. It is used as a light source in fibre optic communication.

Draw construction of Schottky diode and state it’s four applications.

Description : Draw construction of Schottky diode and state it’s four applications.

Last Answer : Applications :- 1. RF mixer and detector diode: 2. Power rectifier 3. Voltage clamping 4. Stand alone photovoltaic systems in order to prevent batteries from discharging purpose for the solar panels at night 5. Rectifiers in power supplies.

State any Four applications of PN junction diode.

Description : State any Four applications of PN junction diode.

Last Answer : 1. Rectifiers in power supplies, 2. Detectors in RF, 3 .Clippers, 4. In clamping networks used as DC Restorers, 5. As switches in digital logic circuits.

List any four applications of laser diode.

Description : List any four applications of laser diode.

Last Answer : 1. As light source in fiber optic communication. 2. In the infrared spectrometers. 3. In the medical field. 4. In military applications. 5. To measure distance, alignment angle etc. 6. For flow ... . 9. For welding. 10. For sound recording and reproduction (in CD players) 11. In holography.

Write the function of C and L in π filter and write two advantages of π filter over other filters.

Description : Write the function of C and L in π filter and write two advantages of π filter over other filters.

Last Answer : The capacitors C1 and C2 provide a low reactance path for the ripple whereas the series inductor L provides a high reactance to the ac ripple. The combined effect of this is the reduction in ripple, and ... very low. 4. High dc voltage (approximately Vm) 5. Increase in the average load voltage. 

State two functions of slug- tuned inductor and write the expression of self-inductance.

Description : State two functions of slug- tuned inductor and write the expression of self-inductance.

Last Answer : It is kind of variable inductor. The value of inductance increases, when the slug is moved into the coil winding and decreases the resonant frequency. When the slug is moved out of the coil ... decreases and resonant frequency of the tuned circuit increases. Self-inductance (L)= N x φ /I

Draw the constructional diagram of iron core inductor and write the working of it.

Description : Draw the constructional diagram of iron core inductor and write the working of it.

Last Answer : Iron core inductors allow high inductance value but are limited in high frequency capacity due to hysteresis and eddy current losses. Iron core increases the magnetic induction of a ... certain point this result in a useful increase in inductance. Beyond that point, inductance decreases.

Write four specifications of capacitor. Write the range of values for any one type of capacitor.

Description : Write four specifications of capacitor. Write the range of values for any one type of capacitor.

Last Answer : Specifications of capacitor are: i. Working voltage ii. Capacitive reactance iii. Dissipation factor iv. Frequency characteristics v. Equivalent series resistance vi. Quality Factor vii. Tolerance Electrolytic capacitor= 0.47μF to 10,000μF

State operating principle of LED. Write material names used to manufacture LED.

Description : State operating principle of LED. Write material names used to manufacture LED.

Last Answer : Principle of Operation of LED:  When an LED is forward biased, the electron in the n-region will cross the junction and recombine with the holes is p-type. When the recombination takes ... Gallium Arsenide Phosphite (GaAsP) : Red or Yellow. Gallium Phosphite (GaP) : Red or Green.

Write the difference between iron core inductor and ferrite core inductor.

Description : Write the difference between iron core inductor and ferrite core inductor. 

Last Answer : difference between iron core inductor and ferrite core inductor

Write colour code of 1 kΩ resistor.

Description : Write colour code of 1 kΩ resistor.

Last Answer : The colour code of 1 kΩ resistor is : Brown, Black, Red

List specifications of resistors and explain any two.

Description : List specifications of resistors and explain any two.

Last Answer : List specifications of resistors are as follows: 1. Maximum voltage rating. 2. Power rating. 3. Temperature co- efficient of resistance. 4. Tolerance. 5. Operating temperature. 6. Ohmic ... form of energy. Tolerance: It is defined as deviation from nominal value of resistance in percent.

State any Four specifictions of capacitor and explain any two in details.

Description : State any Four specifictions of capacitor and explain any two in details.

Last Answer : Specifictions of capacitor: 1.Dielectric material 2.Capacitance value 3.Working voltage 4.Tolerence 5.Temperature coefficient 6.Power factor 7.C/V ratio 9.Insulation resistance Explanation: 1.Working ... side from actual value. 4.C/V ratio: It is the ratio of capacitance to volume.

List the two advantages of Bridge Rectifier.

Description : List the two advantages of Bridge Rectifier. 

Last Answer : The advantages of bridge rectifier: The output is twice that of the center-tap circuit for the same secondary voltage. The PIV is one half that of the center-tap circuit. The ... and hence transformer losses are reduced. It can be used in applications allowing floating output terminals. 

Draw construction of PVC gang capacitor and describe it’s working.

Description : Draw construction of PVC gang capacitor and describe it’s working.

Last Answer :  Diagram Working  In plastic core capacitor, poly-vinyl chloride (PVC) type of plastic film is used as dielectric between the fixed & movable vanes instead of air. This increases ... & results in great reduction of size of capacitor in comparison with the air core capacitor.

Describe construction of Aluminium Electrolytic capacitor.

Description : Describe construction of Aluminium Electrolytic capacitor.

Last Answer : A plain foil dry electrolytic capacitor is made by forming a coating of aluminium oxide on both sides of an aluminium foil. Two strips of aluminium foil used are then separated by two layers of porous ... is rolled up the ends closed with wax and then sealed into an aluminium container.

Define rectification efficiency. Give its formula.

Description : Define rectification efficiency. Give its formula.

Last Answer : The ratio of output DC power delivered to the load to the applied input AC power is called rectification efficiency. It is denoted by η. η = Output DC power delivered to the load / Input AC power from transformer secondary η = Pdc / Pac

Define permeability and reluctivity of magnetic material.

Description : Define permeability and reluctivity of magnetic material. 

Last Answer : Permeability is the capability of a specific material to allow the flow of magnetic flux more easily. Thus higher permeability enables a material to pass more magnetic flux. Reluctivity is equal to the ratio of the intensity of the magnetic field to the magnetic induction of the material.

Define following terms: i) Active networks. ii) Unilateral networks

Description : Define following terms: i) Active networks. ii) Unilateral networks

Last Answer : i) Active networks: If a network consists of an energy source then it is called an active network. The type of energy source can be a voltage source or a current source. ii) ... direction of current through its elements in it, then the network is called as a unilateral network.

Explain the working principle of slug tuned inductor.

Description : Explain the working principle of slug tuned inductor.

Last Answer : The value of inductor increases, when the slug (moving coil) is moved into the coil winding and hence decreases the resonant frequency of the tuned circuit. Similarly, when the slug is moved out of the ... be varied by using movable core which can be moved up or down by using screw driver.

Draw the star and delta connection. State any one conversion formula.

Description : Draw the star and delta connection. State any one conversion formula.

Last Answer : star and delta connection

Explain the following terms 1. Bilateral Network 2. Linear Network

Description : Explain the following terms 1. Bilateral Network 2. Linear Network

Last Answer : Bilateral Network If the magnitude of current flowing through a circuit element is not affected when the polarity of the applied voltage is changed, then the element is known as a bilateral element. ... network comprising of one or more linear number of elements is known as a linear network.

Explain with neat sketch construction of PIN Diode. Draw its characteristics in reverse bias mode.

Description : Explain with neat sketch construction of PIN Diode. Draw its characteristics in reverse bias mode. 

Last Answer : Construction A PIN diode is made up of three semiconductor materials; two heavily doped P- and N- type material separated by an intrinsic (undoped) semiconductor (I) as shown in above figure ... . This advantage allows the PIN diode to process even weak signals.  Characteristics

Explain the working of TDR along with its symbol and characteristics.

Description : Explain the working of TDR along with its symbol and characteristics. 

Last Answer : TDR are also called as thermistors. Thermally sensitive materials are used to manufacture thermistors. Depending on the temperature co- efficient of resistance value thermistors are classified as ... used when a drastic change in resistance is required at specific temperature. RαT

Draw the circuit diagram of bridge rectifier and label it.

Description : Draw the circuit diagram of bridge rectifier and label it. 

Last Answer : Circuit Diagram Bridge rectifier

Draw a label diagram of ferrite core inductor.

Description : Draw a label diagram of ferrite core inductor.

Last Answer : Ferrite core inductor

Convert the delta network into equivalent star network.

Description : Convert the delta network into equivalent star network.

Last Answer : Delta to start network R1 = 4x6/ 4+6+2 = 24/12 =2/1= 2Ω R2 = 2x6/ 4+6+2 = 12/12= 1 = 1Ω R3 = 4x 2/ 4+6+2 = 8/12= 2/3= 0.66Ω