Description : What type of heat transfer is affected by the colour of surfaces?
Last Answer : Need answer
Description : A black surface absorbs more heat radiations as compared to a white or a reflecting surface under identical conditions. List two solar devices which make use of this property in their design. -Science
Last Answer : Solar cooker, solar water heater.
Description : If a gas absorbs `200J` of heat and expands by `500 cm^(3)` against a constant pressure of `2 xx 10^(5) N m^(-2)`, then the change in internal energy
Last Answer : If a gas absorbs `200J` of heat and expands by `500 cm^(3)` against a constant pressure of `2 xx 10^(5) N ... . `-100 J` C. `+100 J` D. None of these
Description : A system absorbs reversibly 600 J of heat and performs 250 J of work. The increase in the internal energy of system is :-
Last Answer : A system absorbs reversibly 600 J of heat and performs 250 J of work. The increase in the internal energy of system ... J B. 250 J C. 600 J D. 350 J
Description : What is A device that absorbs and draws heat from a hot object dispersing it into the surroundings is which one of the following?
Description : What is the best term to describe a chemical reaction that absorbs heat energy?
Last Answer : What is the answer ?
Description : When air passes through silica gel, A. it absorbs water vapour molecules B. latent heat of condensation is released C.dbt of air increases D. all of the mentioned
Last Answer : ANSWER : D
Description : The water in an open pond remains cool even in hot summer because (a) Of continuous evaporation of water (b) Water radiates heat more rapidly than the atmosphere (c) Water absorbs heat less rapidly than the atmosphere (d) Water absorbs heat more rapidly than the atmosphere
Last Answer : Ans:(c)
Description : An iron hammer, lying in the sun, appears much hotter than its wooden handle because (a) iron is at a higher temperature (b) iron is darker than wood (c) iron absorbs more heat (d) iron is a good conductor of heat
Last Answer : Ans:(d)
Description : The temperature of water at the bottom of a large waterfall is higher than that of the water at the top, because - (1) the falling water absorbs heat from the Sun. (2) the water at the bottom has ... of the falling water is converted into heat. (4) rocks on the bed of the river give out heat.
Last Answer : (3) the kinetic energy of the falling water is converted into heat. Explanation: The water gains kinetic energy as it falls down and loses its potential energy. Assuming no other losses, part of the kinetic energy gain of water is converted into heat, raising the temperature of water.
Description : The water from a hand pump is warm in winter because - (1) our body is cold in winter and the water appears to be warm (2) the temperature inside the Earth is higher than the atmospheric ... causes friction which warms up the water (4) inside water comes out and absorbs heat from the environment
Last Answer : (2) the temperature inside the Earth is higher than the atmospheric temperature
Description : Wollen clothes keep the body warm because – (1) Wool increases the temperature of the body (2) Wool is a had conductor (3) Wool absorbs radiant heat from outer objects (4) Wool rejects heat from the outer objects
Last Answer : (2) Wool is a had conductor Explanation: It is just because woolen clothes have fibres and between those fibres air is trapped which reduces heat loss. Air reduces heat loss because it is an ... have a greater bulk than other textiles, and retain air, which causes the product to retain heat.
Description : The water from a hand pump is warm in winter because - (1) Our body is cold in winter and the water appears to be warm (2) The temperature inside the earth is higher than the atmospheric ... causes friction which warms up the water (4) Inside water comes out and absorbs heat from the environment
Last Answer : (2) The temperature inside the earth is higher than the atmospheric temperature Explanation: In winter, the outside temperature is lower than that of water flowing out of the pump, and therefore, the ... the outside temperature is higher than the water of the pump, and therefore, it feels cold.
Description : A body absorbs heat most if it is – (1) black and rough (2) black and smooth (3) white and rough (4) white and smooth
Last Answer : (1) black and rough Explanation: A black body is an idealized physical body that absorbs all incident electromagnetic radiation, regardless of frequency or angle of incidence. Another property is roughness. Sand is rough and black and so it is a good absorber.
Description : Which surface absorbs all forms of light and heat?
Last Answer : black surface
Description : Higher concentration of CO2 in atmosphere (A) Allows visible solar radiation (ultraviolet) of short wave-length to pass through (B) Reflects and absorbs the longer wavelength (infra-red) radiations (C) Prevents solar heat being ... in 'heat trap' i.e., global warming (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : If a system absorbs 500 cal of heat at the same time does 400J of work, find the change in internal energy of the system. a. 1400 J b. 1700 J c. 1900 J d. 1500 J
Last Answer : 1700 J
Description : Endothermic refers to a process that w) does work x) gives off heat y) loses mass z) absorbs heat
Last Answer : ANSWER: Z -- ABSORBS HEAT
Description : The water from a hand pump is warm in winter because (1) Our body is cold in winter and the water appears to be warm (2) The temperature inside the earth is higher than the atmospheric ... causes friction which warms up the water (4) Inside water comes out and absorbs heat from the environment
Last Answer : The temperature inside the earth is higher than the atmospheric temperature
Description : A body absorbs heat most if it is (1) black and rough (2) black and smooth (3) white and rough (4) white and smooth
Last Answer : black and rough
Description : Wollen clothes keep the body warm because (1) Wool increases the temperature of the body (2) Wool is a bad conductor (3) Wool absorbs radiant heat from outer objects (4) Wool rejects heat from the outer objects
Last Answer : Wool is a bad conductor
Description : The temperature of water at the bottom of a large waterfall is higher than that of the water at the top. because (1) the falling water absorbs heat from the Sun. (2) the water at the bottom has greater ... of the falling water is converted into heat. (4) rocks on the bed of the river give out heat.
Last Answer : the kinetic energy of the falling water is converted into heat.
Description : Do land surfaces of earth heat more rapidly than water surfaces?
Last Answer : Yes, they do. Water has a higher "specific heat" than soil.
Description : Choose the most important factor on which the heat conducted through a wall in a unit time will depend on? (A) Thickness of the wall (B) Area of the wall perpendicular to heat flow (C) Material of the wall (D) Temperature difference between the two surfaces of the wall
Last Answer : (D) Temperature difference between the two surfaces of the wall
Description : Fourier's law of heat conduction applies to __________ surfaces. (A) Isothermal (B) Non-isothermal (C) Both (A) and (B) (D) Neither (A) and (B)
Last Answer : (C) Both (A) and (B)
Description : Steady state one dimensional heat flow by conduction as given by Fourier's low does not assume that (A) There is no internal heat generation (B) Boundary surfaces are isothermal (C) Material is anisotropic (D) Constant temperature gradient exists
Last Answer : (C) Material is anisotropic
Description : The overall heat transfer co-efficient for a shell and tube heat exchangerfor clean surfaces is U0 = 400 W/m2 .K. The fouling factor after one year of operation is found to be hd0 = 2000 W/m2 .K. The overall heat transfer coefficient ... 1200 W/m2 .K (B) 894 W/m2 .K (C) 333 W/m2 .K (D) 287 W/m2 .K
Last Answer : (C) 333 W/m2 .K
Description : Pick out the wrong statement. (A) Heat transfer from a hot body to cold body by the emission of heat waves is called radiation (B) Filmwise condensation takes place on non-wettable surfaces (C) The ... of a solution is affected by liquid head as well as boiling point elevation (D) None of these
Last Answer : (B) Filmwise condensation takes place on non-wettable surfaces
Description : Is a type of weathering where rock is broken down as it absorbs?
Last Answer : Feel Free to Answer
Description : Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of ... debris C. periodic testing of insulation resistance with a megger D. all of the above
Last Answer : Answer: D
Description : What type of wear occurs due to an interaction of surfaces due to adhesion of the metals? a) Adhesive wear b) Abrasive wear c) Fretting wear d) Erosive wear
Last Answer : a) Adhesive wear
Description : 18 years old female weighting 52Kg and 163cm tall. On dental examination erosion of teeth on the most of her lingual surfaces is clearly showing. Dietary history revealed a daily rate of 5000 to 7000 ... . Alcoholism B. Drug abuse C. Bulimia D. Excessive smoking E. Diabetic mellitus type I
Last Answer : C. Bulimia
Description : Suggest the type of cement used for the following : (i) For modular construction where form work needs to be removed early for re-use. . (ii) Mass concreting such as construction of dam. (iii) Decorative works in external surfaces of building. (iv) Cementing the oil well.
Last Answer : i) For modular construction where form work needs to be removed early for reuse. – Rapid Hardening Cement ii) Mass concreting such as construction of dam. – Low heat cement. iii) Decorative works in external surfaces of building – Coloured cement. iv) Cementing the oil well. – Oil Well Cement.
Description : Can thick diapers absorbs much more than a thin diaper?
Last Answer : Put one of each on, soil yourself, and post some pictures. Then we can make that determination.
Description : What is the The chemical part of the dye that absorbs light and produces colour called? -Do You Know?
Last Answer : answer:
Description : When chlorophyll absorbs light, what does it gets excited and emits? -Do You Know?
Description : which object absorbs the most sound waves?
Last Answer : earplugs
Description : In which process of plant protoplasm and cell wall absorbs water ?
Last Answer : The plant absorbs water in the process of protoplasm and cell wall adsorption.
Description : Which element in the atmosphere absorbs ultraviolet rays ?
Last Answer : Ozone in the atmosphere absorbs ultraviolet rays.
Description : What does an object look like when it absorbs all the light ?
Last Answer : An object appears black when it absorbs all the light.
Description : Which animal absorbs water through its skin ?
Last Answer : Molecule absorbs water through the skin.
Description : Which element absorbs water vapor ?
Last Answer : : The solid absorbs the main water vapor
Last Answer : Black absorbs more light.
Description : A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37.0^(@)C` . As it does so, it absorbs
Last Answer : A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37. ... J` D. `q= +208 J, w=+208 J`
Description : A dye absorbs a photon of wavelength `lambda` and re`-` emits the same energy into two phorons of wavelengths `lambda_(1)` and `lambda_(2)` respective
Last Answer : A dye absorbs a photon of wavelength `lambda` and re`-` emits the same energy into two phorons of wavelengths ` ... 2))/((lambda_(1)+lambda_(2))^(2))`
Description : A `[M(H_(2)O)_(6)]^(2+)` complex typically absorbs at around 600 nm. It is allowed to react with ammonia to form a new complex `[M(NH_(3))_(6)]^(2+)`
Last Answer : A `[M(H_(2)O)_(6)]^(2+)` complex typically absorbs at around 600 nm. It is allowed to react with ammonia ... A. 800 nm B. 580 nm C. 620 nm D. 320 nm
Description : (a) `[Ti(H_(2)O)_(6)]^(3+)` absorbs light of wavelength 5000Å. Name one ligand which would form a titanium (III) complex absorbing light to lower wave
Last Answer : (a) `[Ti(H_(2)O)_(6)]^(3+)` absorbs light of wavelength 5000Å. Name one ligand which would form a titanium (III) ... ^(3+)" " (iv) [Pd(en)_(2)]^(2+)`