If the reactants of a reaction are 2AgCIO3 and Na2CO3 which could be a product?

If the reactants of a reaction are 2AgCIO3 and Na2CO3 which could be a product?
by

1 Answer

Answer :

Ag2CO3 -apex
by
selected by

Related questions

Which of the following is a co-product during the manufacture of caustic soda by electrolysis of brine? (A) Na2CO3 (B) NaHCO3 (C) H2 (D) None of these

Description : Which of the following is a co-product during the manufacture of caustic soda by electrolysis of brine? (A) Na2CO3 (B) NaHCO3 (C) H2 (D) None of these

Last Answer : (C) H2

Which of the following reactants on reaction with conc. NaOH followed by acidification gives following lactone as the product?

Description : Which of the following reactants on reaction with conc. NaOH followed by acidification gives following lactone as the product?

Last Answer : Which of the following reactants on reaction with conc. NaOH followed by acidification gives following lactone as the product? A. B. C. D.

Which of the following reactants on reaction with conc. NaOH followed by acidification gives following lactone as the product?

Description : Which of the following reactants on reaction with conc. NaOH followed by acidification gives following lactone as the product?

Last Answer : Which of the following reactants on reaction with conc. NaOH followed by acidification gives following lactone as the product? A. B. C. D.

If the total mass of the product in this chemical reaction is 14g what must the combined masses of the reactants be?

Description : If the total mass of the product in this chemical reaction is 14g what must the combined masses of the reactants be?

Last Answer : 4

A combination reaction occurs when two or more reactants form one product T or F?

Description : A combination reaction occurs when two or more reactants form one product T or F?

Last Answer : T

The reaction in which product mole- cules react and give back the original reactants is called?

Description : The reaction in which product mole- cules react and give back the original reactants is called?

Last Answer : Backward reaction

The reaction in which product mole- cules react and give back the original reactants is called?

Description : The reaction in which product mole- cules react and give back the original reactants is called?

Last Answer : Backward reaction

25. In a reaction, A + B  Product, rate is doubled when the concentration of B is doubled, and rate increases by a factor of 8 when the concentrations of both the reactants (A and B) are doubled, rate law for the reaction can be written as: (1) Rate = k[A]2 [B] (2) Rate = k[A] [B]2 (3) Rate = k[A]2 [B]2 (4) Rate = k[A] [B]

Description : 25. In a reaction, A + B  Product, rate is doubled when the concentration of B is doubled, and rate increases by a factor of 8 when the concentrations of both the reactants (A and B) are doubled, rate law for the reaction can be ... Rate = k[A] [B]2 (3) Rate = k[A]2 [B]2 (4) Rate = k[A] [B]

Last Answer : Rate = k[A]2 [B] (

Is it possible to standardize HCl solution using Na2CO3? If yes which indicator you will use?

Description : Is it possible to standardize HCl solution using Na2CO3? If yes which indicator you will use?

Last Answer : I plugged your question into Google. This is what came up.

Is sodium carbonate Na2CO3 and bicarbonate NaHCO3 one of the primary standard substances?

Description : Is sodium carbonate Na2CO3 and bicarbonate NaHCO3 one of the primary standard substances?

Last Answer : Why are you asking us these questions?

Why the titration of Na2CO3 and HCl solutions is not completed using Ph.Ph indicator?

Description : Why the titration of Na2CO3 and HCl solutions is not completed using Ph.Ph indicator?

Last Answer : Google

10 ml 0.2 Molar Na2CO3 How many grams of 0.1 Molar HCl is needed to soothe ?

Description : 10 ml 0.2 Molar Na2CO3 How many grams of 0.1 Molar HCl is needed to soothe ?

Last Answer : Na₂CO₃ + 2HCl = NaCl + CO₂ + H₂O of Na₂CO₃ , density S₁ = 0.2 M; Volume , V₁ = 10 mL HCl density S₂ = 0.1 M; Volume = V₂ 2S₁V₁ = S₂V₂ ∴ V₂ = 2S₁V₁ / S₂ = 2 0.2 10 / 0.1 = 40 mL The molecular mass of HCl , M = ... / MV₂ ∴ w = S₂MV₂ / 1000 = 0.1 36.5 40/1000 = 0.146 g (Ans.)

What is the percentage attachment of C element in Na2CO3 compound ?

Description : What is the percentage attachment of C element in Na2CO3 compound ?

Last Answer : The percentage addition of C element in that compound is 11.32 percent

What happens when crystalline Na2CO3 is heated ?

Description : What happens when crystalline Na2CO3 is heated ?

Last Answer : What happens when crystalline Na2CO3 is heated ? a. releases CO2 b. loses H2O c. decomposes into NaHCO3 d. colour changes.

What laboratory procedure you would use to separate and recover the components of a mixture containing BaSO4 Na2CO3 and C10H8?

Description : What laboratory procedure you would use to separate and recover the components of a mixture containing BaSO4 Na2CO3 and C10H8?

Last Answer : Na2CO3 is soluble in water and separated by filtration from a water mixture.Naphtalene is separated by heating when sublimation occur.

What are the raw materials used for the precipitation of Na2Co3 by Solvay ammonium Process ?

Description : What are the raw materials used for the precipitation of Na2Co3 by Solvay ammonium Process ?

Last Answer : Sodium Chloride, limestone and ammonia

Chemical formula of washing soda is - (1) Na2SO4.10H2O (2) NaHCO3 (3) Na2CO3.10H2O (4) Ca(OH)2

Description : Chemical formula of washing soda is - (1) Na2SO4.10H2O (2) NaHCO3 (3) Na2CO3.10H2O (4) Ca(OH)2

Last Answer : (3) Na2CO3.10H2O Explanation: Washing Soda is essentially Sodium Carbonate, a sodium salt of carbonic acid (soluble in water). The molecular formula of washing soda is Na2CO3.10H2O. It is used as ... It reacts with the calcium and magnesium bonds present in the water, enabling the detergent to work.

Why Li2CO3 decomposes at a lower temperature whereas Na2CO3 at higher temperature ?

Description : Why Li2CO3 decomposes at a lower temperature whereas Na2CO3 at higher temperature ?

Last Answer : Ans.Li2CO3 is a salt of a weak acid (CO2) and a weak base (LiOH). Since the weak base cannot attract CO2 Strongly, therefore, Li2CO3 decomposes at a lower temperature.On the other hand ,NaOH is a Much stronger base than LiOH and hence can attract CO2 more strongly.

State as to why: (a) A solution of Na2CO3 is alkaline? (b)alkali metals are prepared by electrolysis of their fused chlorides ? (c)sodium is found to be more useful than potassium ?

Description : State as to why: (a) A solution of Na2CO3 is alkaline? (b)alkali metals are prepared by electrolysis of their fused chlorides ? (c)sodium is found to be more useful than potassium ?

Last Answer : Ans. (a) It undergoes hydrolysis to produce a strong base NaOH . (b) When the aq. Solution of any alkali metal is subjected to electrolysis ,H2 instead of the alkali metal is produced at the ... of sugars and amino acids into the cells. Thus, sodium is found to be more useful than potassium.

How are 0.50 m Na2CO3 and 0.50 M Na2CO3 different?

Description : How are 0.50 m Na2CO3 and 0.50 M Na2CO3 different?

Last Answer : Ans. 0.50 m Na2CO3 solution means that 0.5 mol (or 53g) of Na2CO3 are present in 1000 g of solvent. 0.50 M Na2CO3 solution means that 0.5 mol (or 53g) of Na2CO3 are present in 1L of solution.

Eschka mixture, which is used for the determination of sulphur in coal, is a mixture of (A) MgO & Na2CO3 (B) MgSO4 & BaCl2 (C) BaSO4 & NaCl (D) MgCO3 & NaC

Description : Eschka mixture, which is used for the determination of sulphur in coal, is a mixture of (A) MgO & Na2CO3 (B) MgSO4 & BaCl2 (C) BaSO4 & NaCl (D) MgCO3 & NaC

Last Answer : (A) MgO & Na2CO3

Vetrocoke solution is (A) A mixture of K2CO3 and As2O3 (B) K2SO4 (C) A mixture of Na2CO3 and As2O3 (D) Na2SO4

Description : Vetrocoke solution is (A) A mixture of K2CO3 and As2O3 (B) K2SO4 (C) A mixture of Na2CO3 and As2O3 (D) Na2SO4

Last Answer : (A) A mixture of K2CO3 and As2O3

Washing soda is chemically represented by (A) Na2CO3 (B) Na2CO3 .H2O (C) Na2CO3 .10H2O (D) NaHC

Description : Washing soda is chemically represented by (A) Na2CO3 (B) Na2CO3 .H2O (C) Na2CO3 .10H2O (D) NaHC

Last Answer : (C) Na2CO3 .10H2O

The purpose of adding Na2CO3 to water of low alkalinity is to (A) Permit the use of alum as a coagulant (B) Increase the softening capacity of zeolite (C) Facilitate easy regeneration of zeolite (D) All (A), (B) and (C)

Description : The purpose of adding Na2CO3 to water of low alkalinity is to (A) Permit the use of alum as a coagulant (B) Increase the softening capacity of zeolite (C) Facilitate easy regeneration of zeolite (D) All (A), (B) and (C)

Last Answer : (A) Permit the use of alum as a coagulant

Dense soda ash used in the manufacture of glass, is chemically represented by (A) Na2CO3 (B) Na2CO3 .10H2O (C) Na2CO3 .H2O (D) Na2HCO3

Description : Dense soda ash used in the manufacture of glass, is chemically represented by (A) Na2CO3 (B) Na2CO3 .10H2O (C) Na2CO3 .H2O (D) Na2HCO3

Last Answer : (C) Na2CO3 .H2O

Main constituent of dolomite is (A) CaCO3 (B) MgCO3 (C) K2CO3 (D) Na2CO3

Description : Main constituent of dolomite is (A) CaCO3 (B) MgCO3 (C) K2CO3 (D) Na2CO3

Last Answer : (B) MgCO3

Main constituent of limestone is (A) CaCO3 (B) MgCO3 (C) Na2CO3 (D) CaSO4

Description : Main constituent of limestone is (A) CaCO3 (B) MgCO3 (C) Na2CO3 (D) CaSO4

Last Answer : (A) CaCO3

Permanent hardness of water can be removed by (A) Boiling (B) Adding Ca(OH)2 (C) Boiling it with Na2CO3 (D) None of these

Description : Permanent hardness of water can be removed by (A) Boiling (B) Adding Ca(OH)2 (C) Boiling it with Na2CO3 (D) None of these

Last Answer : (C) Boiling it with Na2CO3

Chemical formula of washing soda is (1) Na2 SO4 .10H2O (2) NaHCO3 (3) Na2CO3 .10H2O (4) Ca(OH)2

Description : Chemical formula of washing soda is (1) Na2 SO4 .10H2O (2) NaHCO3 (3) Na2CO3 .10H2O (4) Ca(OH)2

Last Answer : Na2CO3 .10H2O

Consider the following gas - phase reaction : `2A(g)+B(g)rArrC(g)+D(g)` An equilibrium mixture of reactants and products is subjected to the following

Description : Consider the following gas - phase reaction : `2A(g)+B(g)rArrC(g)+D(g)` An equilibrium mixture of reactants and products is subjected to the following

Last Answer : Consider the following gas - phase reaction : `2A(g)+B(g)rArrC(g)+D(g)` An equilibrium mixture of reactants and ... II, III C. II, III, IV D. I, III

If the only reactants of a reaction were zn and hci what does the law of conservation of mass say about the products?

Description : If the only reactants of a reaction were zn and hci what does the law of conservation of mass say about the products?

Last Answer : Need answer

What causes pressure changes of reactants to affect reaction rate?

Description : What causes pressure changes of reactants to affect reaction rate?

Last Answer : The frequency of collisions is changed.

What affect does the concentration of reactants have on the rate of a reaction?

Description : What affect does the concentration of reactants have on the rate of a reaction?

Last Answer : Need answer

Are the reactants always completely used up in a chemical reaction?

Description : Are the reactants always completely used up in a chemical reaction?

Last Answer : Need answer

What factor in reaction rate is related to the amount of reactants?

Description : What factor in reaction rate is related to the amount of reactants?

Last Answer : This is the concentration of reactants.

What are reactants that join together with an enzyme in a reaction?

Description : What are reactants that join together with an enzyme in a reaction?

Last Answer : Need answer

What happens to the total mass of the reactants in a chemical reaction?

Description : What happens to the total mass of the reactants in a chemical reaction?

Last Answer : Need answer

The only reactants in a reaction were Zn and HCI. What does the law of conservation of matter say about the products?

Description : The only reactants in a reaction were Zn and HCI. What does the law of conservation of matter say about the products?

Last Answer : The product will contain only Zn, H, and CI. -Apex

In the reaction A+B ➝ C+D, what are the reactants?

Description : In the reaction A+B ➝ C+D, what are the reactants?

Last Answer : A and B

The order of reaction is the number of moles whose concentrations determine the rate of a reaction at a given temperature Give the integrated equation for first order reaction. K = (2.303 / t) * log (a / a-x) Rate equation of first order reaction is. dx/dt = K * (a-x) where ‘a’ is the initial concentration of reactants ‘x’ is the amount reacted in time t seconds

Description : The order of reaction is the number of moles whose concentrations determine the rate of a reaction at a given temperature Give the integrated equation for first order reaction. K = (2.303 / t) * log (a ... a' is the initial concentration of reactants x' is the amount reacted in time t seconds

Last Answer : What is Threshold energy ?

It is important to balance the chemical equations to satisfy the law of conservation of mass. Which of the following statements of the law is incorrect? (a) The total mass of the elements present in the reactants is equal to the total mass of the elements present in the products. (b) The number of atoms of each element remains the same, before and after a chemical reaction. (c) The chemical composition of the reactants is the same before and after the reaction (d) Mass can neither be created nor can it be destroyed in a chemical Reaction.

Description : It is important to balance the chemical equations to satisfy the law of conservation of mass. Which of the following statements of the law is incorrect? (a) The total mass of the elements present in ... the reaction (d) Mass can neither be created nor can it be destroyed in a chemical Reaction.

Last Answer : Answer : (c) The chemical composition of the reactants is the same before and after the reaction

During decomposition, energy is absorbed in the form of heat, light or electricity for breaking down the reactants which is known as: (a) exothermic reaction (b) endothermic reaction (c) reduction reaction (d) oxidation

Description : During decomposition, energy is absorbed in the form of heat, light or electricity for breaking down the reactants which is known as: (a) exothermic reaction (b) endothermic reaction (c) reduction reaction (d) oxidation

Last Answer : (b) endothermic reaction

Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time requiredto reduce the concentration of reactant from 100 gm moles/litre to 50 gmmoles/litre is same as that required to reduce it from 2 gm moles/litre to 1gm mole/litre in the same volume. Then the order of this reaction is:(A) 0(B) 1(C) 2(D) 3

Description : Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time required to ... Then the order of this reaction is: (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (B) 1

Reverse reaction in a chemical equilibrium is favoured by the (A) Removal of one of the products regularly (B) Increase in the concentration of one of the products (C) Increase in the concentration of one of the reactants (D) None of these

Description : Reverse reaction in a chemical equilibrium is favoured by the (A) Removal of one of the products regularly (B) Increase in the concentration of one of the products (C) Increase in the concentration of one of the reactants (D) None of these

Last Answer : (B) Increase in the concentration of one of the products

In a reversible chemical reaction having two reactants in equilibrium, if the concentration of the reactants are doubled, then the equilibrium constant will (A) Remain the same (B) Be halved (C) Also be doubled (D) Become one fourth

Description : In a reversible chemical reaction having two reactants in equilibrium, if the concentration of the reactants are doubled, then the equilibrium constant will (A) Remain the same (B) Be halved (C) Also be doubled (D) Become one fourth

Last Answer : (A) Remain the same

Which of the following will favour the reverse reaction in a chemical equilibrium reaction? (A) Increasing the concentration of one of the reactants (B) Increasing the concentration of one or more of the products (C) Removal of at least one of the products at regular interval (D) None of these

Description : Which of the following will favour the reverse reaction in a chemical equilibrium reaction? (A) Increasing the concentration of one of the reactants (B) Increasing the concentration of one or more of the products (C) Removal of at least one of the products at regular interval (D) None of these

Last Answer : (B) Increasing the concentration of one or more of the products

In a reaction, the threshold energy is equal to (where, A = activation energy N = normal energy of reactants) (A) A (B) N (C) A + N (D) A - N

Description : In a reaction, the threshold energy is equal to (where, A = activation energy N = normal energy of reactants) (A) A (B) N (C) A + N (D) A - N

Last Answer : (C) A + N

Enzymes are destroyed, when the (A) Temperature is very high (B) Reactant's concentration is very high (C) Reactant's concentration is very low (D) Reaction rate is independent of the reactant's concentration

Description : Enzymes are destroyed, when the (A) Temperature is very high (B) Reactant's concentration is very high (C) Reactant's concentration is very low (D) Reaction rate is independent of the reactant's concentration

Last Answer : (A) Temperature is very high

For a zero order chemical reaction, the (A) Half life period is directly proportion to the initial concentration of the reactants (B) Plot of products concentration with time is a straight line through the origin (C) Products concentration increases linearly with time (D) All (A), (B) and (C)

Description : For a zero order chemical reaction, the (A) Half life period is directly proportion to the initial concentration of the reactants (B) Plot of products concentration with time is a straight line through the origin (C) Products concentration increases linearly with time (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst can cause the conversion of large amount of reactants which does not mean that catalyst concentration is important (C) The catalyst does not form an intermediate complex with the reactant (D) The surface of the catalyst does not play an important role during reaction

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction