What are the raw materials used for the precipitation of Na2Co3 by Solvay ammonium Process ?

1 Answer

Answer :

 Sodium Chloride, limestone and ammonia   

Related questions

Description : Raw materials for 'Solvay Process' for manufacture of the soda ash are (A) Salt, limestone and coke or gas (B) Ammonia, salt and limestone (C) Ammonia limestone and coke (D) None of these

Last Answer : (A) Salt, limestone and coke or gas

Description : Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Last Answer : (B) Brine and coal

Description : Name the process by which washing soda is prepared. (a)Solvay process (b) ammonium soda process (c) Both (a) and (b) (d)none of above

Last Answer : (c) Both (a) and (b)

Description : Solvay process is not used for the manufacture of potassium carbonate, because of the reason that potassium bicarbonate (A) Is prone to thermal decomposition (B) Has high water solubility and is unstable (C) Is soluble in ammonium chloride and potassium chloride solution (D) All (A), (B) and (C)

Last Answer : (C) Is soluble in ammonium chloride and potassium chloride solution

Description : What are the raw material used for the manufacture of washing soda by solvay process ?

Last Answer : Ans. Nacl, CaCO3 and NH3

Description : Raw materials required for the production of CAN (Calcium ammonium nitrate) is NH3 (A) HNO3 & limestone (B) CO2 & H2SO4 (C) HNO3 & NH4Cl (D) CO2 & KNO3

Last Answer : (A) HNO3 & limestone

Description : Give the raw materials, chemical reaction and industrial application for manufacturing of ammonium sulphate. 

Last Answer : Raw Material for Ammonium Sulphate Ammonia + Sulfuric acid Or Coal + carbon monoxide +carbon dioxide + ammonia Or Ammonia + carbon dioxide + gypsum Chemical reaction for Ammonium sulphate ... application Used as or in Fertilizer an additive water treatment and /or cleaning additive

Description : Barium chloride on reacting with ammonium sulphate forms barium sulphate and ammonium chloride. Which of the following correctly represents the type of the reaction involved? (a) Displacement reaction (b) Precipitation reaction (c) Combination ... Only (A) B) Only (B) C) Only (D) D) (B) & (D)

Last Answer : D) (B) & (D)

Description : Solvay process is related to?

Last Answer : Sodium carbonate (Na2CO3) & Bicarbonate of Soda (NaHCO3)

Description : The carbonating tower used in Solvay process of soda ash manufactureis made of (A) Cast iron (B) Stainless steel (C) Karbate (D) Lead lined steel

Last Answer : (A) Cast iron

Description : Potassium carbonate cannot be prepared by Solvay process. Why?

Last Answer : Ans. Potassium carbonate cannot be prepared by Solvay process because potassium bicarbonate being more soluble than sodium bicarbonate does not get precipitated when CO2 is passed through a Conc. Solution of KCl saturated with ammonium.

Description : K2CO3 Cannot be prepared by solvay process ?

Last Answer : Ans. Because KHCO3 is highly soluble in water

Description : Sodium carbonate is produced by------? A. haber process B. Amonia solvay process (Answer) C. decons process D. lead chamber process

Last Answer : B. Amonia solvay process (Answer)

Description : Which of the following oil gasification processes is non-catalytic? (A) Semet-Solvay process (B) Segas process (C) Onia-Gegi process (D) Steam reforming of naphtha

Last Answer : (A) Semet-Solvay process

Description : In the production of soda ash by Solvay process, the by-product is (A) CaCl2 (B) NH4Cl (C) NH3 (D) NaOH

Last Answer : (A) CaCl2

Description : __________ process is used for the commercial production of nitric acid by the catalytic oxidation of ammonia. (A) Solvay (B) Ostwald's (C) Haber's (D) None of these

Last Answer : (B) Ostwald's

Description : __________ process is used for the manufacture of sodium carbonate by ammonia soda process. (A) Ostwald's (B) Bosch (C) Solvay (D) Haber's

Last Answer : (C) Solvay

Description : Which of the following is not required in the manufacture of soda ash by Solvay process? (A) Ammonia (B) Limestone (C) Nitric acid (D) None of these

Last Answer : (C) Nitric acid

Description : Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Description : Solvay process is used for the manufacture of (A) Caustic soda (B) Soda ash (C) Caustic potash (D) Soda lime

Last Answer : (B) Soda ash

Description : Which of the following may be viewed as a catalyst in the manufacturesoda ash by Solvay process? (A) NH3 (B) NaCl (C) CaO (D) Coke

Last Answer : (A) NH3

Description : _________ process is used for producing soda ash. (A) Chamber (B) Chance (C) Tromp (D) Solvay

Last Answer : (D) Solvay

Description : In the Solvay process, the product from the calciner is (A) Light soda ash (B) Dense soda ash (C) Sodium bicarbonate (D) Dehydrated soda ash

Last Answer : (A) Light soda ash

Description : Economics of 'Solvay Process' depends upon the efficiency of (A) Carbonating tower (B) Ammonia recovery (C) Ammonia recovery and size of the plant (D) Ammoniation of salt solution

Last Answer : (C) Ammonia recovery and size of the plant

Description : How is Sodium Carbonate (Washing Soda), Na2CO3·10H2O manufactured by “Solvay Process” 

Last Answer : Principle-- In this process, advantage is taken of the low solubility of sodium hydrogencarbonate whereby it gets precipitated in the reaction of sodium chloride with ammonium hydrogencarbonate. The latter is prepared ... treated with Ca(OH)2. Calcium chloride is obtained as a by-product. 

Description : Why Solvay process cannot be extended for the manufacture of potassium carbonate? 

Last Answer : Solvay process cannot be extended to the manufacture of potassium carbonate because potassium hydrogencarbonate is too soluble to be precipitated by the addition of ammonium hydrogencarbonate to a saturated solution of potassium chloride. 

Description : Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Last Answer : (A) Sulphuric acid

Description : rting raw material for the manufacture of alum is (A) Alumina (B) Gypsum (C) Bauxite (D) Ammonium bicarbonate

Last Answer : (C) Bauxite

Description : Enlist the raw material required in manufacturing of Ammonium Nitrate. 

Last Answer : Raw materials required for ammonium nitrate Ammonia Nitric Acid 

Description : What are the methods of treatment & disposal of radioactive wastes? (A) Evaporation & chemical precipitation (B) Biological methods & adsorption in ion exchange materials (C) Fixing into a solid mass with cement and sinking deep in the sea (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : Pick up the correct statement from the following:  (A) The precipitation during its travel in atmosphere dissolves certain gases  (B) Rain water which percolates through the ground, is free from ... water may dissolve minerals and salts present in the earth's layers  (D) All the above 

Last Answer : (D) All the above 

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Items that are purchased routinely, do not become part of the final physical product, and are treated like expense items rather than capital goods are called 1. raw materials 2. major equipment 3. accessory equipment 4. component part 5. process materials

Last Answer : accessory equipment

Description : Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both ... in case of the sulphite method as compared to that in the sulphate method (D) None of these

Last Answer : (D) None of these

Description : Which of the following is not a component of working capital? (A) Raw materials is stock (B) Finished products in stock (C) Transportation facilities (D) Semi-finished products in the process

Last Answer : (C) Transportation facilities

Description : Which of the following is not a component of the fixed capital for a chemical plant facility? (A) Raw materials inventory (B) Utilities plants (C) Process equipment (D) Emergency facilities

Last Answer : (A) Raw materials inventory

Description : What is the value of all tangible resources such as raw materials and Labour that are used in the production process called?

Last Answer : Real Cost

Description : In which process, Purification of raw materials by removing foreign matter (a) Harvesting (c) Primary (b) Secondary (d) Tertiary

Last Answer : Primary

Description : Process of managing upstream and downstream of final goods, flow of raw materials and information about resellers and final consumers is classified as A. marketing logistics network B. supply chain management C. delivery network D. physical distribution network

Last Answer : B. supply chain management

Description : Items that are purchased routinely, do not become part of the final physical product, and are treated like expense items rather than capital goods are called A)raw materials. B)major equipment. C)accessory equipment. D)component parts. E)process materials.

Last Answer : C)accessory equipment.

Description : Large tools and machines used in a production process for a considerable length of time are classified as A)major equipment. B)accessory equipment. C)component parts. D)raw materials. E)consumable supplies.

Last Answer : A)major equipment

Description : Is it possible to standardize HCl solution using Na2CO3? If yes which indicator you will use?

Last Answer : I plugged your question into Google. This is what came up.

Description : Is sodium carbonate Na2CO3 and bicarbonate NaHCO3 one of the primary standard substances?

Last Answer : Why are you asking us these questions?

Description : Why the titration of Na2CO3 and HCl solutions is not completed using Ph.Ph indicator?

Last Answer : Google

Description : 10 ml 0.2 Molar Na2CO3 How many grams of 0.1 Molar HCl is needed to soothe ?

Last Answer : Na₂CO₃ + 2HCl = NaCl + CO₂ + H₂O of Na₂CO₃ , density S₁ = 0.2 M; Volume , V₁ = 10 mL HCl density S₂ = 0.1 M; Volume = V₂ 2S₁V₁ = S₂V₂ ∴ V₂ = 2S₁V₁ / S₂ = 2 0.2 10 / 0.1 = 40 mL The molecular mass of HCl , M = ... / MV₂ ∴ w = S₂MV₂ / 1000 = 0.1 36.5 40/1000 = 0.146 g (Ans.)

Description : What is the percentage attachment of C element in Na2CO3 compound ?

Last Answer : The percentage addition of C element in that compound is 11.32 percent

Description : What happens when crystalline Na2CO3 is heated ?

Last Answer : What happens when crystalline Na2CO3 is heated ? a. releases CO2 b. loses H2O c. decomposes into NaHCO3 d. colour changes.

Description : What laboratory procedure you would use to separate and recover the components of a mixture containing BaSO4 Na2CO3 and C10H8?

Last Answer : Na2CO3 is soluble in water and separated by filtration from a water mixture.Naphtalene is separated by heating when sublimation occur.

Description : If the reactants of a reaction are 2AgCIO3 and Na2CO3 which could be a product?

Last Answer : Ag2CO3 -apex

Description : Chemical formula of washing soda is - (1) Na2SO4.10H2O (2) NaHCO3 (3) Na2CO3.10H2O (4) Ca(OH)2

Last Answer : (3) Na2CO3.10H2O Explanation: Washing Soda is essentially Sodium Carbonate, a sodium salt of carbonic acid (soluble in water). The molecular formula of washing soda is Na2CO3.10H2O. It is used as ... It reacts with the calcium and magnesium bonds present in the water, enabling the detergent to work.