State the situation where plane table is suitable.

State the situation where plane table is suitable. 
by

1 Answer

Answer :

1) It is most suitable for preparing small scale maps

2) It is suitable in magnetic are where compass survey is not reliable

3) It is most suitable for filling in details between stations fixed by triangulation

4) It is suitable where accuracy is not required.
by

Related questions

Explain ‘Intersection Method’ of plane table surveying with neat sketch. Also give situation when intersection method is used.

Description : Explain ‘Intersection Method’ of plane table surveying with neat sketch. Also give situation when intersection method is used.

Last Answer : 1. Lay out a base line AB and measure it and Plot a distance ab' on sheet using any scale. 2.Set up instrument at A' with a' over A' 3.Orient the table by placing alidade ... the case of the survey of mountainous country. 5. The only linear measurement required is that of a base line.

State advantages of plane table survey one each with respect to booking and suitability

Description : State advantages of plane table survey one each with respect to booking and suitability

Last Answer : Booking of observations: i) Field work and plotting work done simultaneously ii) ) Notes of measurement are seldom required and possibility of mistakes in booking is eliminated. Suitability of PT ... and work where great accuracy is not required. ii) Mostly suitable for survey in plain terrain

State merits and demerits of plane table survey.

Description : State merits and demerits of plane table survey. 

Last Answer : Merits: 1) It is the most rapid method of surveying.  2)There is no need for field book as plotting is done along with the field work, so the problem of mistakes in booking field notes does not arise. ... to carry. 5) The map cannot be replotted to defferent scale as there is no field book. 

State the use of alidade in plane table surveying

Description : State the use of alidade in plane table surveying

Last Answer : 1) It is used for sighting the objects to be located.  2) It is used for drawing the rays. 

What is orientation of plane table? State the procedure of any one method of orientation.

Description : What is orientation of plane table? State the procedure of any one method of orientation.

Last Answer : Orientation of plane table: It means placing table in parallel positions at all stations (or at successive station) 1. Orientation using trough compass: Here north direction is marked at first station ... rotated till ranging rod at previous station is exactly bisected. The table is then clamped. 

State the principle of plane table survey.

Description : State the principle of plane table survey. 

Last Answer : Principle of plane table survey 1. The rays drawn from different points should pass through a single point i.e. position of station point.  2. The position of table should be same as that of previous station i.e. orientation should be done at each changed station.

State four advantages and four disadvantages of plane table survey

Description : State four advantages and four disadvantages of plane table survey

Last Answer : Advantages: 1. A field book is not required. 2. Errors of booking in field book avoided. 3. Errors of plotting can be readily checked. 4. Suitable in magnetic area. 5. Survey work with ... cannot be done in rainy season. 5. Difficult to re-plot as field notes are not available.

State the limitations of plane table surveying.

Description : State the limitations of plane table surveying.

Last Answer : 1) It is not suitable for work in wet climate 2) Several accessories are required to be carried hence possibility lost. 3) Replotting of survey work to different scale is difficult in absence of ... ) It is not intended for accurate work. 6) The plane table is essentially a tropical instrument.

State the suitability of plane table survey

Description : State the suitability of plane table survey

Last Answer : The plane tabling is generally suitable for surveys in which high precision is not required. It is mainly employed for small-scale or medium size mapping.

Draw sketch and explain method of traversing of plane table surveying.

Description : Draw sketch and explain method of traversing of plane table surveying. 

Last Answer : Procedure: 1.Set plane table over station A use plumbing fork for transferring station point from ground on sheet. Draw the direction of magnetic meridian with the help of compass. 2. With the ... scale Similarly, the table can be set at other successive station and traverse is completed.

Describe back sighting method of orientation of plane table surveying.

Description : Describe back sighting method of orientation of plane table surveying.

Last Answer : Backsight method of orientation 1. Assume we have to orient the table at next station B' represented on paper by point b'. 2.the line ba' is drawn on previous station A'. 3.the alidade is kept ... A'. 4. When the plotted line ab' coincides with line AB' and table will be oriented.

Explain the radiation method of plane table survey with neat sketch.

Description : Explain the radiation method of plane table survey with neat sketch. 

Last Answer : This method is used when all the points to be plotted are visible from single instrument station. Steps are: 1. Select a suitable point P on the ground such that all the details are visible from it. 2. Center and ... , pc, pd, pe respectively. Join a, b, c, d, and e to give the outline.

Explain Orientation of plane table by Back-sighting Method.

Description : Explain Orientation of plane table by Back-sighting Method.

Last Answer : Ans:- The method of setting up the plane table at each of the successive stations parallel to the position it occupied at the starting station is known as an Orientation. Orientation must be done when ... and bisection of the ranging rod at a are perfect then orientation is said to perfect.  

Explain temporary adjustment of plane table survey.

Description : Explain temporary adjustment of plane table survey.

Last Answer : 1. Setting over the station: The plane table is fixed on tripod and adjust the table in such a way that table is approximately level. 2. Leveling the table: The tubular or spirit level is placed in two ... . The table can be oriented in two ways. i. Using trough compass. ii. By back sighting.

List any four accessories required for plane table survey.

Description : List any four accessories required for plane table survey.

Last Answer : 1. Plane table. 2. Plumbing U-fork. 3. Alidade. 4. Spirit level. 5. Trough compass. 6. Plumb bob.

Describe in brief errors in plane table survey.

Description : Describe in brief errors in plane table survey.

Last Answer : 1) The board not being horizontal. 2) The table not being accurately centered. 3) The table not being Correctly oriented. 4) The objects not being sited accurately. 5) The alidade not being ... through the station point. 7) Inaccuracy in plotting. 8) The expansion and contraction of the paper.

Describe in brief resection method of plane table surveying.

Description : Describe in brief resection method of plane table surveying.

Last Answer : This method is used for establishing the instrument stations only. After fixing the stations, details are located either by radiation or intersection. The characteristic feature of resection is that the point ... of resection are (1)The Two Point Problem, and (2)Three Point Problem.

Enlist different accessories of plane table survey with their use.

Description : Enlist different accessories of plane table survey with their use. 

Last Answer : i) The plane table: It is used for fixing a drawing sheet over it.  To locate the position of the objects on the sheet by drawing rays and plotting to suitable scale. ii) The Alidade (plain Alidade ... v) U-Fork or Plumbing fork with plumb bob: It is used for centering the table over the station. 

State any two uses of Plane Surveying.

Description : State any two uses of Plane Surveying. 

Last Answer : 1) Plane surveying is used for measuring small distance. 2) When area is less than 260 km2, plane survey is normally done. 3) When desired accuracy is less, plane survey is done.

State the situations under which chain survey is most suitable

Description : State the situations under which chain survey is most suitable

Last Answer : Situations under which chain survey is most suitable 1) It is suitable for moderately small areas 2) When the ground is fairly level with simple details ( free from obstructions such as trees, building, poles etc ) 

Explain Fly Levelling with neat sketch. State situation under which fly levelling is needed.

Description : Explain Fly Levelling with neat sketch. State situation under which fly levelling is needed.

Last Answer : Ans: When DifferentialLevelling is done in order to connect a bench mark to the starting point of the alignment of any project, it is called as fly levelling. Fly levelling is also done to connect ...  ii)if distance is more between two points.  iii)if there obstacles between the two points.  

Write any four advantages of intersection method of plane tabling over radiation method of plane tabling.

Description : Write any four advantages of intersection method of plane tabling over radiation method of plane tabling.

Last Answer : Advantages of intersection method: 1. Interection method requires less ground distance measurement than radiation method. 2. By this method we can locate inaccessible points which cannot be ... to radiation method, intersection method eliminates undulation error, bisection error and plotting errors.

Explain errors occurred due to manipulation and sighting in plane tabling.

Description : Explain errors occurred due to manipulation and sighting in plane tabling.

Last Answer : i) The board not being horizontal- This error affects chiefly the measurement of vertical angles. ii) The table not being accurately centered. The plotted position of the occupied station not ... and correct any displacement. v) The defective sighting- The object not being correctly sighted.

Define orientation and principle of plane tabling.

Description : Define orientation and principle of plane tabling. 

Last Answer : Orientation: The orientation of plane table means keeping the plane table at all stations parallel to the position it occupied at first station. Principles of plane table survey: 1. The rays drawn from ... same as that of previous station i.e. orientation should be done at each changed station.  

Enlist the methods of plane tabling.

Description : Enlist the methods of plane tabling. 

Last Answer : Method of Surveying with the plane table are : 1) Radiation 2) Intersection 3) Traversing 4) Resection

Compare collimation plane method and rise and fall method of reduction of levels.

Description : Compare collimation plane method and rise and fall method of reduction of levels.

Last Answer : The comparison between collimation plane method and Rise and fall method is given below. Collimation plane method Rise and Fall method 1 1. It is rapid method as it involves few calculations. ... Arithmetic check in this method is ΣBS - ΣFS = ΣRise - ΣFall = Last RL - First RL

Explain with neat sketch the procedure of radiation method of plane tabling.

Description : Explain with neat sketch the procedure of radiation method of plane tabling.

Last Answer : 1. The table is set at suitable station e.g. P from where all stations can be sighted and measured. 2. After centering and leveling, mark station P as P' on sheet. 3. Suppose stations A, B, C, and D are ... marked as pa. 5. Similarly station B, C and D are bisected and marked as b, c and d.

Differentiate between plane and geodetic survey on any four points.

Description : Differentiate between plane and geodetic survey on any four points. 

Last Answer : Difference between Plane Surveying and Geodetic Surveying Points Plane Surveying Geodetic Surveying Definition Plane surveying is that type of surveying in which mean surface of ... Traditional survey equipment is used Precise and modern survey equipment are required

Explain intersection method of plane survey.

Description : Explain intersection method of plane survey.

Last Answer : Intersection method of plane tabling 1. Lay out a base line AB and measure it and Plot a distance ab' on sheet using any scale. 2.Set up instrument at A' with a' over A' 3.Orient the table by ... sighted rays bd, bg, bf, bc are drawn to determine points intersection, d, g, f, c.

What are the sources of errors in plane tabling?

Description : What are the sources of errors in plane tabling?

Last Answer : The following are the sources of errors in plane tabling 1) The board not being horizontal 2) The table not being accurately centered 3) The table not being Correctly oriented 4) The objects ... through the station point 7) Inaccuracy in plotting 8) The expansion and contraction of the paper 

Differentiate between plane of collimation and rise and fall method.

Description : Differentiate between plane of collimation and rise and fall method.

Last Answer : S.N Rise and fall method Plane of collimation 1 It is slow and more tedious. It is more rapid and less tedious  2 It is laborious as it involves more calculations. It is simple ... .S.-ΣF.S=ΣRise-Σfall =Last RL-First RL Arithmetical check ΣB.S.- ΣF.S=Last RL-First RL

State the fundamental axes and mention their relationship for a dumpy level.

Description : State the fundamental axes and mention their relationship for a dumpy level.

Last Answer : Fundamental axis of dumpy level are as follows; i) The vertical axis ii) The axis of bubble tube iii) The line of collimation iv) The axis of the telescope Relationship between ... iii) Axis of telescope and line of collimation should coincide when dumpy level is correctly leveled.

State the two uses of survey based on geodetic surveying

Description : State the two uses of survey based on geodetic surveying

Last Answer : Two uses of survey based on geodetic surveying:- i) To determine the precise position s on the surface of the earth. ii) Preparation of maps of large area like map of a country, state ... ) Establishment of GTS bench Marks across the country. iv) Preparation of military maps for defense purposes.

State the important points kept in mind while recording the staff readings in level pages with respect first reading, intermediate reading, last reading, change point, carry forward from one page to next page-Remark

Description : State the important points kept in mind while recording the staff readings in level pages with respect first reading, intermediate reading, last reading, change point, carry forward from one page to next page-Remark

Last Answer : 1) First reading is on bench mark point and should be noted in back sight(BS) column 2) Intermediate reading (IS) should be taken on the points between first and last station. 3) Last reading ... column of next page 6) Remark column should have denote First and Last RL along with change points.

State the purposes of following methods of leveling. i)Profile leveling, ii)Fly leveling, iii)Check leveling iv)Reciprocal leveling

Description : State the purposes of following methods of leveling. i)Profile leveling, ii)Fly leveling, iii)Check leveling iv)Reciprocal leveling

Last Answer : 1. Profile leveling- To determine the undulation of ground surface along given line for alignment of road, canal or pipe, railway line 2. Fly leveling-It is used to for connecting B.M. to ... is used to find the difference in leveling between two points two point obstructed due to river or pond.

State fundamental lines and their relationships with each other of dumpy level.

Description : State fundamental lines and their relationships with each other of dumpy level.

Last Answer : Fundamental axes of dumpy level : i) The vertical axis ii) The axis of bubble tube iii) The line of collimation iv) The axis of the telescope Relations of Fundamental axes : i) The ... to the axis of the bubble tube. iii) Axis of telescope and line of collimation should coincide.

State two advantages of telescopic alidade over simple alidade.

Description : State two advantages of telescopic alidade over simple alidade.

Last Answer : Advantages of telescopic alidade : i) Telescopic alidade is more accurate in bisection than simple alidade ii) Telescopic alidade is useful in comparatively longer range objects. iii) It can be easily ... is not possible by simple alidade. iv) It gives quicker bisection which saves time ultimately.

Define orientation. State two methods of orientation. Which method is most accurate and why?

Description : Define orientation. State two methods of orientation. Which method is most accurate and why? 

Last Answer : Orientation is the process of keeping plane table in same position as that is occupied in previous station. Methods of orientation: i) Magnetic meridian method using trough compass ii) Back ... and not by using trough compass. Therefore there is no error occurring due to local attraction.

State temporary adjustments of prismatic compass

Description : State temporary adjustments of prismatic compass

Last Answer : a) Setting the prismatic compass over prefixed survey station b) Centering the compass over nail point of station using plumb bob c) Leveling of compass in horizontal plane using level tube d) Focusing of prism by raising and lowering the focussing stud

State four instruments used for setting offsets.

Description : State four instruments used for setting offsets.

Last Answer : i) Instruments used for setting offsets: 1)Chain 2)Tape 3) Open & French Cross Staff 4) Circular & Indian Optical Square  ii) Principle of optical square: The angle between the first incident ray and the last reflected ray is twice to that of angle between two mirrors in optical square.

Define local attraction. State two causes of local attraction.

Description : Define local attraction. State two causes of local attraction.

Last Answer : Local attraction: It is the deviation or deflection of magnetic needle from its normal position under influence of external magnetic forces is called as local attraction. Causes of local attraction : 1. Iron ... structure 2. Electric cable line 3. High voltage current 4. Bunch of key 5. Steel Tape 

What is bench mark? State the types of bench mark and explain any one type.

Description : What is bench mark? State the types of bench mark and explain any one type.

Last Answer : Bench Mark- It is fixed reference point of known or assumed elevation. Types of bench mark1. Great trignometrical survey bench mark 2. Permanent bench mark 3. Arbitrary bench mark 4. Temporary bench ... Karachi are given in catalogue formed by department. They are also known as G.T.S. Bench mark

Describe quadrantal bearing system. State the purpose it is used.

Description : Describe quadrantal bearing system. State the purpose it is used. 

Last Answer : Quadrantal Bearing - 1. The magnetic bearing of line measured clockwise or anticlockwise from north or south pole whichever is nearer. 2. These bearings are also called as reduced bearings. 3. ... lines in a closed traverse. 2. It is used to calculate back bearing for respective quadrants.

State and describe the types of offsets.

Description : State and describe the types of offsets. 

Last Answer : 1. Perpendicular offset- When the offset is taken at 900 to the survey line, then it is known as perpendicular offset. 2. Oblique offset- When the offset is taken at an angle other than 900 ( ... when offset is set by swinging chain or tape to survey line, such formed offset is called Swing offset.

State any two uses of survey.

Description : State any two uses of survey.

Last Answer : Survey is useful for following: 1. To prepare a map or plan of the surveyed area for attaching it to legal documents. 2. To plot control points of boundries of locality 3. To determine ... . 5. To decide suitable gradient and camber of road depending on equal volume of cutting and filling.

What is meant by local attraction? How will you suspect local attraction at the field ? state its effect on included angle.

Description : What is meant by local attraction? How will you suspect local attraction at the field ? state its effect on included angle.

Last Answer : Local attraction: It is the deviation or deflection of magnetic needle from its normal position under influence of external magnetic forces is called as local attraction. Suspect of local attraction ... The needle is affected by local attraction therefore it does not give a corrected angle

State any four sources of errors in compass survey

Description : State any four sources of errors in compass survey 

Last Answer : Following are the sources of errors in compass survey1. Instrumental survey-  a. Needle may not be perfectly straight and might not be balanced properly over the station.  b. Graduations of the rings ... substances near the station.  b. Magnetic field may vary on account of some natural causes. 

State fundamental axis of dumpy level and give their relationship

Description : State fundamental axis of dumpy level and give their relationship 

Last Answer : Fundamental axes of dumpy level : i) The vertical axis ii) The axis of bubble tube iii) The line of collimation iv) The axis of the telescope Relations of Fundamental axes : i) The ... parallel to the axis of the bubble tube. iii) Axis of telescope and line of collimation should coincide. 

State the use of following- 1. Arrow 2. Wooden peg

Description : State the use of following- 1. Arrow 2. Wooden peg

Last Answer : 1. Arrow Arrows are used for counting the number of chains while measuring a chain line. 2. Wooden peg Pegs are used for fixing the instrument station on the ground permanent marking

Define surveying & state its objectives

Description : Define surveying & state its objectives

Last Answer : Surveying- It is branch of civil engineering in which relative positions of ground points are determined by taking linear and angular measurement. Objectives: 1. To determine the relative positions of ... quantities 4. To prepare a topographical map showing details of hills, valleys and rivers.