Write any four advantages of intersection method of plane tabling over radiation method of plane tabling.

Write any four advantages of intersection method of plane tabling over radiation method of plane tabling.
by

1 Answer

Answer :

Advantages of intersection method: 1. Interection method requires less ground distance measurement than radiation method. 2. By this method we can locate inaccessible points which cannot be located by radiation method i.e. from single station. 3. As objects can be located by intersection of lines, this method is more accurate in positioning and verifying the objects than radiation method. 4. As compared to radiation method, intersection method eliminates undulation error, bisection error and plotting errors.
by

Related questions

Explain with neat sketch the procedure of radiation method of plane tabling.

Description : Explain with neat sketch the procedure of radiation method of plane tabling.

Last Answer : 1. The table is set at suitable station e.g. P from where all stations can be sighted and measured. 2. After centering and leveling, mark station P as P' on sheet. 3. Suppose stations A, B, C, and D are ... marked as pa. 5. Similarly station B, C and D are bisected and marked as b, c and d.

The method of plane tabling commonly used for establishing the instrument station is a method of (a) Radiation (b) Intersection* (c) Resection (d) Traversing

Description : The method of plane tabling commonly used for establishing the instrument station is a method of (a) Radiation (b) Intersection* (c) Resection (d) Traversing

Last Answer : (b) Intersection*

Explain errors occurred due to manipulation and sighting in plane tabling.

Description : Explain errors occurred due to manipulation and sighting in plane tabling.

Last Answer : i) The board not being horizontal- This error affects chiefly the measurement of vertical angles. ii) The table not being accurately centered. The plotted position of the occupied station not ... and correct any displacement. v) The defective sighting- The object not being correctly sighted.

Define orientation and principle of plane tabling.

Description : Define orientation and principle of plane tabling. 

Last Answer : Orientation: The orientation of plane table means keeping the plane table at all stations parallel to the position it occupied at first station. Principles of plane table survey: 1. The rays drawn from ... same as that of previous station i.e. orientation should be done at each changed station.  

Enlist the methods of plane tabling.

Description : Enlist the methods of plane tabling. 

Last Answer : Method of Surveying with the plane table are : 1) Radiation 2) Intersection 3) Traversing 4) Resection

What are the sources of errors in plane tabling?

Description : What are the sources of errors in plane tabling?

Last Answer : The following are the sources of errors in plane tabling 1) The board not being horizontal 2) The table not being accurately centered 3) The table not being Correctly oriented 4) The objects ... through the station point 7) Inaccuracy in plotting 8) The expansion and contraction of the paper 

Explain ‘Intersection Method’ of plane table surveying with neat sketch. Also give situation when intersection method is used.

Description : Explain ‘Intersection Method’ of plane table surveying with neat sketch. Also give situation when intersection method is used.

Last Answer : 1. Lay out a base line AB and measure it and Plot a distance ab' on sheet using any scale. 2.Set up instrument at A' with a' over A' 3.Orient the table by placing alidade ... the case of the survey of mountainous country. 5. The only linear measurement required is that of a base line.

Explain intersection method of plane survey.

Description : Explain intersection method of plane survey.

Last Answer : Intersection method of plane tabling 1. Lay out a base line AB and measure it and Plot a distance ab' on sheet using any scale. 2.Set up instrument at A' with a' over A' 3.Orient the table by ... sighted rays bd, bg, bf, bc are drawn to determine points intersection, d, g, f, c.

Which one of the following procedures for getting accurate orientation is the most distinctive feature of the art of plane tabling? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Description : Which one of the following procedures for getting accurate orientation is the most distinctive feature of the art of plane tabling? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Last Answer : (D) Resection

Explain the radiation method of plane table survey with neat sketch.

Description : Explain the radiation method of plane table survey with neat sketch. 

Last Answer : This method is used when all the points to be plotted are visible from single instrument station. Steps are: 1. Select a suitable point P on the ground such that all the details are visible from it. 2. Center and ... , pc, pd, pe respectively. Join a, b, c, d, and e to give the outline.

State four advantages and four disadvantages of plane table survey

Description : State four advantages and four disadvantages of plane table survey

Last Answer : Advantages: 1. A field book is not required. 2. Errors of booking in field book avoided. 3. Errors of plotting can be readily checked. 4. Suitable in magnetic area. 5. Survey work with ... cannot be done in rainy season. 5. Difficult to re-plot as field notes are not available.

State advantages of plane table survey one each with respect to booking and suitability

Description : State advantages of plane table survey one each with respect to booking and suitability

Last Answer : Booking of observations: i) Field work and plotting work done simultaneously ii) ) Notes of measurement are seldom required and possibility of mistakes in booking is eliminated. Suitability of PT ... and work where great accuracy is not required. ii) Mostly suitable for survey in plain terrain

Draw sketch and explain method of traversing of plane table surveying.

Description : Draw sketch and explain method of traversing of plane table surveying. 

Last Answer : Procedure: 1.Set plane table over station A use plumbing fork for transferring station point from ground on sheet. Draw the direction of magnetic meridian with the help of compass. 2. With the ... scale Similarly, the table can be set at other successive station and traverse is completed.

Describe back sighting method of orientation of plane table surveying.

Description : Describe back sighting method of orientation of plane table surveying.

Last Answer : Backsight method of orientation 1. Assume we have to orient the table at next station B' represented on paper by point b'. 2.the line ba' is drawn on previous station A'. 3.the alidade is kept ... A'. 4. When the plotted line ab' coincides with line AB' and table will be oriented.

Explain Orientation of plane table by Back-sighting Method.

Description : Explain Orientation of plane table by Back-sighting Method.

Last Answer : Ans:- The method of setting up the plane table at each of the successive stations parallel to the position it occupied at the starting station is known as an Orientation. Orientation must be done when ... and bisection of the ranging rod at a are perfect then orientation is said to perfect.  

Compare collimation plane method and rise and fall method of reduction of levels.

Description : Compare collimation plane method and rise and fall method of reduction of levels.

Last Answer : The comparison between collimation plane method and Rise and fall method is given below. Collimation plane method Rise and Fall method 1 1. It is rapid method as it involves few calculations. ... Arithmetic check in this method is ΣBS - ΣFS = ΣRise - ΣFall = Last RL - First RL

What is orientation of plane table? State the procedure of any one method of orientation.

Description : What is orientation of plane table? State the procedure of any one method of orientation.

Last Answer : Orientation of plane table: It means placing table in parallel positions at all stations (or at successive station) 1. Orientation using trough compass: Here north direction is marked at first station ... rotated till ranging rod at previous station is exactly bisected. The table is then clamped. 

Differentiate between plane of collimation and rise and fall method.

Description : Differentiate between plane of collimation and rise and fall method.

Last Answer : S.N Rise and fall method Plane of collimation 1 It is slow and more tedious. It is more rapid and less tedious  2 It is laborious as it involves more calculations. It is simple ... .S.-ΣF.S=ΣRise-Σfall =Last RL-First RL Arithmetical check ΣB.S.- ΣF.S=Last RL-First RL

Describe in brief resection method of plane table surveying.

Description : Describe in brief resection method of plane table surveying.

Last Answer : This method is used for establishing the instrument stations only. After fixing the stations, details are located either by radiation or intersection. The characteristic feature of resection is that the point ... of resection are (1)The Two Point Problem, and (2)Three Point Problem.

Differentiate between plane and geodetic survey on any four points.

Description : Differentiate between plane and geodetic survey on any four points. 

Last Answer : Difference between Plane Surveying and Geodetic Surveying Points Plane Surveying Geodetic Surveying Definition Plane surveying is that type of surveying in which mean surface of ... Traditional survey equipment is used Precise and modern survey equipment are required

List any four accessories required for plane table survey.

Description : List any four accessories required for plane table survey.

Last Answer : 1. Plane table. 2. Plumbing U-fork. 3. Alidade. 4. Spirit level. 5. Trough compass. 6. Plumb bob.

Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Description : Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Last Answer : (D) Three point problem

To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Description : To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Last Answer : (D) Two point problem

The plotting of inaccessible points in a plane-table survey can be done by the method of (a) Interpolation (b) Radiation (c) Intersection (d) Traversing

Description : The plotting of inaccessible points in a plane-table survey can be done by the method of (a) Interpolation (b) Radiation (c) Intersection (d) Traversing

Last Answer : (c) Intersection

State four advantages of auto level.

Description : State four advantages of auto level.

Last Answer : Advantages of auto level: 1. More precise/accurate leveling can be done using these levels. 2. The telescope of this instrument needs only be approximately leveled over the tripod and then the ... it reduces operational fatigue. 5. Clear and erect image. 6. Light weight and compact.

State two advantages of telescopic alidade over simple alidade.

Description : State two advantages of telescopic alidade over simple alidade.

Last Answer : Advantages of telescopic alidade : i) Telescopic alidade is more accurate in bisection than simple alidade ii) Telescopic alidade is useful in comparatively longer range objects. iii) It can be easily ... is not possible by simple alidade. iv) It gives quicker bisection which saves time ultimately.

State advantages of Auto-Level over dumpy level.

Description : State advantages of Auto-Level over dumpy level. 

Last Answer : 1) Auto level gives quick and easy leveling with less effort than dumpy level. 2) It is most accurate and precise which gives least error about 0.5 to 0.8 in 5 km. 3) It is simply ... readings to read; which reflects inverted in some dumpy level. 5) It gives more operational comfort to surveyor. 

State the situation where plane table is suitable.

Description : State the situation where plane table is suitable. 

Last Answer : 1) It is most suitable for preparing small scale maps 2) It is suitable in magnetic are where compass survey is not reliable 3) It is most suitable for filling in details between stations fixed by triangulation 4) It is suitable where accuracy is not required.

State any two uses of Plane Surveying.

Description : State any two uses of Plane Surveying. 

Last Answer : 1) Plane surveying is used for measuring small distance. 2) When area is less than 260 km2, plane survey is normally done. 3) When desired accuracy is less, plane survey is done.

State merits and demerits of plane table survey.

Description : State merits and demerits of plane table survey. 

Last Answer : Merits: 1) It is the most rapid method of surveying.  2)There is no need for field book as plotting is done along with the field work, so the problem of mistakes in booking field notes does not arise. ... to carry. 5) The map cannot be replotted to defferent scale as there is no field book. 

State the use of alidade in plane table surveying

Description : State the use of alidade in plane table surveying

Last Answer : 1) It is used for sighting the objects to be located.  2) It is used for drawing the rays. 

State the principle of plane table survey.

Description : State the principle of plane table survey. 

Last Answer : Principle of plane table survey 1. The rays drawn from different points should pass through a single point i.e. position of station point.  2. The position of table should be same as that of previous station i.e. orientation should be done at each changed station.

Explain temporary adjustment of plane table survey.

Description : Explain temporary adjustment of plane table survey.

Last Answer : 1. Setting over the station: The plane table is fixed on tripod and adjust the table in such a way that table is approximately level. 2. Leveling the table: The tubular or spirit level is placed in two ... . The table can be oriented in two ways. i. Using trough compass. ii. By back sighting.

Describe in brief errors in plane table survey.

Description : Describe in brief errors in plane table survey.

Last Answer : 1) The board not being horizontal. 2) The table not being accurately centered. 3) The table not being Correctly oriented. 4) The objects not being sited accurately. 5) The alidade not being ... through the station point. 7) Inaccuracy in plotting. 8) The expansion and contraction of the paper.

State the limitations of plane table surveying.

Description : State the limitations of plane table surveying.

Last Answer : 1) It is not suitable for work in wet climate 2) Several accessories are required to be carried hence possibility lost. 3) Replotting of survey work to different scale is difficult in absence of ... ) It is not intended for accurate work. 6) The plane table is essentially a tropical instrument.

Enlist different accessories of plane table survey with their use.

Description : Enlist different accessories of plane table survey with their use. 

Last Answer : i) The plane table: It is used for fixing a drawing sheet over it.  To locate the position of the objects on the sheet by drawing rays and plotting to suitable scale. ii) The Alidade (plain Alidade ... v) U-Fork or Plumbing fork with plumb bob: It is used for centering the table over the station. 

State the suitability of plane table survey

Description : State the suitability of plane table survey

Last Answer : The plane tabling is generally suitable for surveys in which high precision is not required. It is mainly employed for small-scale or medium size mapping.

Write-four uses of surveying.

Description : Write-four uses of surveying.

Last Answer : Uses of surveying are: 1) Surveying is useful to plot ground details in various maps like topographic and cadastral maps. 2) It is useful in navigational movement planning through military survey. ... beneficial in collecting details of water bodies on earth like lake, pond, river, sea etc.

Enlist the advantages of Auto level.

Description : Enlist the advantages of Auto level. 

Last Answer : Following are the advantages of auto level: 1) Operational Comfort: Use of Auto level is free of fatigue, does not cause strain on eyes, nerves etc. 2) High precision : Precision of auto ... of application: Auto can be used for medium and large size project. To establish bench marks accurately.

The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Description : The methods used for locating the plane table stations are (i) Radiation (ii) Traversing (iii) Intersection (iv) Resection The correct answer is (A) (i) and (ii) (B) (iii) and (iv) (C) (ii) and (iv) (D) (i) and (iii)

Last Answer : (C) (ii) and (iv)

Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Description : Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Last Answer : (B) Intersection

In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Description : In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Last Answer : (b) Resection

For locating an inaccessible point with the help of only a plane table, one should use (a) traversing (b) resection (c) radiation (e) Intersection*

Description : For locating an inaccessible point with the help of only a plane table, one should use (a) traversing (b) resection (c) radiation (e) Intersection*

Last Answer : (e) Intersection*

Compare radiation and intersection methods of plane table surveying on any two parameters.

Description : Compare radiation and intersection methods of plane table surveying on any two parameters. 

Last Answer : Radiation method Intersection method 1. It requires the plane table to occupy a single station.  1. This method requires setting the table up at minimum of two stations.  ... for locating inaccessible points by the intersection of the rays drawn from two instruments stations. 

Define orientation. State two methods of orientation. Which method is most accurate and why?

Description : Define orientation. State two methods of orientation. Which method is most accurate and why? 

Last Answer : Orientation is the process of keeping plane table in same position as that is occupied in previous station. Methods of orientation: i) Magnetic meridian method using trough compass ii) Back ... and not by using trough compass. Therefore there is no error occurring due to local attraction.

Describe stepping method of chaining on sloping ground.

Description : Describe stepping method of chaining on sloping ground.

Last Answer : 1. If A and B are the two points on sloping ground, for which horizontal distance is to be measured. 2. Unfold the chain. By touching handle to station A, stretch it up to maximum possible ... 6. Thus total horizontal distance on sloping ground is calculated as d(AB) = L1+L2+L3 in meters.

Describe method of measuring distances on ground using chain and arrows.

Description : Describe method of measuring distances on ground using chain and arrows.

Last Answer : Method of measuring distances on ground. 1. Mark the position of survey stations whose distance is to be measured using wooden peg. (say A and B) 2. now, ranging is done if distance ... station B. Thus total horizontal distance will be equal to addition of distances measured of each parts.

Explain Direct method of chaining on sloping ground with neat skeetch.

Description : Explain Direct method of chaining on sloping ground with neat skeetch. 

Last Answer : While chaining on sloping ground, the horizontal distances can be computed by direct method i.e. By stepping. By stepping: It consist in measuring the distance in small horizontal lengths (e.g.L1). Let ... is continued in the correct line with point B. Then length of line AB=L1 +L2 +L3+L4

Compare Rise & Fall method and H.I. method.

Description : Compare Rise & Fall method and H.I. method. 

Last Answer : Sr.No.  Rise and Fall Method  H.I. Method  1 It is slow and more tedious.  It is more rapid and less tedious  2 It is laborious as it involves more calculations.  It is simple ... .S.- ΣF.S=ΣRise-Σfall =Last RL-First RL Arithmetical check ΣB.S.- ΣF.S=Last RL-First RL 

With neat sketch, explain the included angle method of plotting compass traverse.

Description : With neat sketch, explain the included angle method of plotting compass traverse. 

Last Answer : 1. Calculate all included angles of the traverse from observed bearings of the lines. e.g. <A, <B, <C, <D, <E  2. Check sum of included angles as equal to ( ... coincide with starting station (in case of closed traverse). If there is closing error, it needs to be corrected.