What is the next number 1 4 20 120?

What is the next number 1 4 20 120?
by

1 Answer

Answer :

It is 7 times 120 = 840
by
selected by

Related questions

What is the next number 120 60 30 15?

Description : What is the next number 120 60 30 15?

Last Answer : The next number will be 7.5

A officer undertakes to complete a job in 250 days. He employs 300 male for 50 days and they complete 1/2 of the work . He then reduces the number of male to 100, who work for 120 days, after which there are 20 days holidays. How many male must be employed for the remaining period to finish the work? a) 25 b) 50 c) 45 d) 35

Description : A officer undertakes to complete a job in 250 days. He employs 300 male for 50 days and they complete 1/2 of the work . He then reduces the number of male to 100, who work for 120 days, after which there ... male must be employed for the remaining period to finish the work? a) 25 b) 50 c) 45 d) 35

Last Answer : B 300 male in 50 days do = 1/2work 1 male in 1 day does = ½*1/50*1/300 work 100 male in 120 days do = ½ *1/50*1/300 *100*120 =2/5 work Total work done = ½ + 2/5 =(5+4)/10=9/10 ... is done in 50 days by 300 male 1/10 work is done in 60 days by =300*50*1*2/10*60 =50 male

120 men can lay a road 80 km long in 20 days. In how many days can 100 men lay a road of length 90 km?

Description : 120 men can lay a road 80 km long in 20 days. In how many days can 100 men lay a road of length 90 km?

Last Answer : 120 men can lay a road 80 km long in 20 days. In how many days can 100 men lay a road of length 90 km?

A,B and C can do a work in 20,45 and 120 days respectively.They started the work. A left 10 days before and B left 5 days before the completion of wor

Description : A,B and C can do a work in 20,45 and 120 days respectively.They started the work. A left 10 days before and B left 5 days before the completion of wor

Last Answer : A,B and C can do a work in 20,45 and 120 days respectively.They started the work. A left 10 ... work. In how many days is the total work completed ?

What continent is 20 degrees south and 120 degrees east?

Description : What continent is 20 degrees south and 120 degrees east?

Last Answer : Asia

What continent is 20 degrees south and 120 degrees east?

Description : What continent is 20 degrees south and 120 degrees east?

Last Answer : Asia

X Ltd. forfeited 20 shares of Rs. 10 each on which Rs. 6 per share were paid. If out of these shares, 8 shares were reissued to Ram as fully paid up on payment of Rs. 5•50 per share, the amount that will remain standing to the credit of Share Forfeited A/c will be– (A) Rs. 48 (B) Rs. 72 (C) Rs. 84 (D) Rs. 120

Description : X Ltd. forfeited 20 shares of Rs. 10 each on which Rs. 6 per share were paid. If out of these shares, 8 shares were reissued to Ram as fully paid up on payment of Rs. 5 50 per share, the amount that will remain standing ... Share Forfeited A/c will be- (A) Rs. 48 (B) Rs. 72 (C) Rs. 84 (D) Rs. 120

Last Answer : Answer: Rs. 120

XYZ Ltd. issued 10,000 shares of Rs. 100 each at Rs. 120 per share with Rs. 25 on application, Rs. 45 on allotment including premium, Rs. 20 on first call and Rs. 30 on final call. Govind who held 200 shares did not pay any call money and his shares were forfeited. What is the amount to be credited to Share Forfeiture Account on forfeiture ? (A) Rs. 14,000 (B) Rs. 10,000 (C) Rs. 9,000 (D) Rs. 4,000

Description : XYZ Ltd. issued 10,000 shares of Rs. 100 each at Rs. 120 per share with Rs. 25 on application, Rs. 45 on allotment including premium, Rs. 20 on first call and Rs. 30 on final call. Govind who held 200 shares did not pay ... forfeiture ? (A) Rs. 14,000 (B) Rs. 10,000 (C) Rs. 9,000 (D) Rs. 4,000

Last Answer : Answer: Rs. 10,000

What power is consumed by a heating element using a current of 20 amperes at 120 volts? A. 20 watts B. 66.67 watts C. 720 watts D. 2400 watts

Description : What power is consumed by a heating element using a current of 20 amperes at 120 volts? A. 20 watts B. 66.67 watts C. 720 watts D. 2400 watts

Last Answer : Answer: D

For a loudness level between 110 and 120 dB, the maximum daily exposure limit is ____ minute (s). A. 1 B. 60 C. 20 D. 45

Description : For a loudness level between 110 and 120 dB, the maximum daily exposure limit is ____ minute (s). A. 1 B. 60 C. 20 D. 45

Last Answer : A. 1

Smoke point of a good burning kerosene may be around __________ mm. (A) 0-5 (B) 20-25 (C) 60-75 (D) 100-120

Description : Smoke point of a good burning kerosene may be around __________ mm. (A) 0-5 (B) 20-25 (C) 60-75 (D) 100-120

Last Answer : (B) 20-25

What is the intensity of sound in normal conversation? (a) 10-20 dB (b) 30-60 dB (c) 70-90 dB (d) 120-150 dB

Description : What is the intensity of sound in normal conversation? (a) 10-20 dB (b) 30-60 dB (c) 70-90 dB (d) 120-150 dB

Last Answer : b) 30-60 dB

In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 days and 8 kg to 10 kg (C) 105 days to 120 days and 18 kg to 21 kg (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Description : In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 ... (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Last Answer : (C) 105 days to 120 days and 18 kg to 21 kg

Find the vector potential when the field intensity 60x 2 varies from (0,0,0) to (1,0,0). a) 120 b) -20 c) -180 d) 60

Description : Find the vector potential when the field intensity 60x 2 varies from (0,0,0) to (1,0,0). a) 120 b) -20 c) -180 d) 60

Last Answer : b) -20

Find the force on a conductor of length 12m and magnetic flux density 20 units when a current of 0.5A is flowing through it. a) 60 b) 120 c) 180 d) 200

Description : Find the force on a conductor of length 12m and magnetic flux density 20 units when a current of 0.5A is flowing through it. a) 60 b) 120 c) 180 d) 200

Last Answer : b) 120

Maximum allowable noise exposure limits for a man working for 8 hours a day in a noisy chemical plant is about __________ decibels. (A) 20 (B) 60 (C) 90 (D) 120

Description : Maximum allowable noise exposure limits for a man working for 8 hours a day in a noisy chemical plant is about __________ decibels. (A) 20 (B) 60 (C) 90 (D) 120

Last Answer : (C) 90

A slow sand filter is cleaned if its filter head is higher than (A) 10 cm to 20 cm (B) 20 cm to 40 cm (C) 40 cm to 70 cm (D) 70 cm to 120 cm

Description : A slow sand filter is cleaned if its filter head is higher than  (A) 10 cm to 20 cm  (B) 20 cm to 40 cm  (C) 40 cm to 70 cm  (D) 70 cm to 120 cm

Last Answer : (D) 70 cm to 120 cm

A column is said to be of medium size if its slenderness ratio is between (A) 20 and 32 (B) 32 and 120 (C) 120 and 160(D) 160 and 180

Description : A column is said to be of medium size if its slenderness ratio is between (A) 20 and 32 (B) 32 and 120 (C) 120 and 160 (D) 160 and 180

Last Answer : (B) 32 and 120

A slow sand filter is cleaned if its filter head is higher than (A) 10 cm to 20 cm (B) 20 cm to 40 cm (C) 40 cm to 70 cm (D) 70 cm to 120 cm

Description : A slow sand filter is cleaned if its filter head is higher than (A) 10 cm to 20 cm (B) 20 cm to 40 cm (C) 40 cm to 70 cm (D) 70 cm to 120 cm

Last Answer : (D) 70 cm to 120 cm

In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Description : In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Last Answer : (D) ∞

The thickness of bituminous carpet varies from (A) 20 to 25 mm (B) 50 to 75 mm (C) 75 to 100 mm (D) 100 to 120 mm

Description : The thickness of bituminous carpet varies from (A) 20 to 25 mm (B) 50 to 75 mm (C) 75 to 100 mm (D) 100 to 120 mm

Last Answer : Answer: Option A

Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat of the substance): 0.20 kCal/kg oC DT (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000

Last Answer : 21600

It takes eight hours for a 600 km journey, if 120 km is done by train and the rest by car. It takes 20 minutes more, if 200 km is done by train and the rest by car. The ratio of the speed of the train to that of the cars is? a) 2 : 3 b) 3: 2 c) 3 : 4 d) 4 : 3 e) None of these

Description : It takes eight hours for a 600 km journey, if 120 km is done by train and the rest by car. It takes 20 minutes more, if 200 km is done by train and the rest by car. The ratio of the speed of the train to that of the cars is? a) 2 : 3 b) 3: 2 c) 3 : 4 d) 4 : 3 e) None of these

Last Answer : Let the speed of the train be x km/hr and that of the car be y km/hr. Then, 120/x+480/y= 8 1/x+4/y=1/15 ....(i) And, 200/x+400/y=25/3 1/x+2/y=1/24 ....(ii) Solving (i) and (ii), we get: x = 60 and y = 80. Ratio of speeds = 60 : 80 = 3 : 4. Answer: c)

Two pipes can fill a tank in 20 and 24 minutes respectively and another pipe can empty 3 gallons per minute. All the three pipes working together can fill the tank in 15 minutes. The capacity of the tank in gallons is: a)100 b)110 c)120 d)140

Description : Two pipes can fill a tank in 20 and 24 minutes respectively and another pipe can empty 3 gallons per minute. All the three pipes working together can fill the tank in 15 minutes. The capacity of the tank in gallons is: a)100 b)110 c)120 d)140

Last Answer : c)120

The skew specification of your multi-tracked tape recorder reads " +/ - 0.20 microseconds between adjacent tracks on the same head stack at 120 ips." What does this mean?

Description : The skew specification of your multi-tracked tape recorder reads " +/ - 0.20 microseconds between adjacent tracks on the same head stack at 120 ips." What does this mean?

Last Answer : One of the tracks on a magnetic head could lead or lag the track next to it by as much as 0.20 microseconds at 120 ips.

A transformer steps down 220V to 40 volts. If the secondary turns are 40 then primary turns will be: a. 20 b. 40 c. 120 d. 220

Description : A transformer steps down 220V to 40 volts. If the secondary turns are 40 then primary turns will be: a. 20 b. 40 c. 120 d. 220

Last Answer : d. 220V

A column is said to be of medium size if its slenderness ratio is between (a) 20 and 32 (b) 32 and 120 (c) 120 and 160 (d) 160 and 180

Description : A column is said to be of medium size if its slenderness ratio is between (a) 20 and 32 (b) 32 and 120 (c) 120 and 160 (d) 160 and 180

Last Answer : (b) 32 and 120

What is the shear stress acting on the outer surface of a hollow shaft subjected to a torque of 100 Nm?(The inner and outer diameter of the shaft is 15 mm and 30 mm respectively.) a. 50.26 N/mm2 b. 40.24 N/mm2 c. 20.120 N/mm2 d. 8.74 N/mm2

Description : What is the shear stress acting on the outer surface of a hollow shaft subjected to a torque of 100 Nm?(The inner and outer diameter of the shaft is 15 mm and 30 mm respectively.) a. 50.26 N/mm2 b. 40.24 N/mm2 c. 20.120 N/mm2 d. 8.74 N/mm2

Last Answer : c. 20.120 N/mm2

Agitator(propeller or paddle)type for agitating liquid in power sprays have a velocity of a.100-120 rpm b.60-100 rpm c.10-20 rpm d. none of the above

Description : Agitator(propeller or paddle)type for agitating liquid in power sprays have a velocity of a.100-120 rpm b.60-100 rpm c.10-20 rpm d. none of the above

Last Answer : a.100-120 rpm

For transmission of power over a distance of 500 km, the transmission voltage should be in the range (a) 150 to 220 kV (b) 100 to 120 kV (c) 60 to 100 kV (d) 20 to 50 kV

Description : For transmission of power over a distance of 500 km, the transmission voltage should be in the range (a) 150 to 220 kV (b) 100 to 120 kV (c) 60 to 100 kV (d) 20 to 50 kV

Last Answer : (a) 150 to 220 kV

What is considered to be the safe limit of daily alcohol consumption by an adult man in the absence of contraindications and interacting drugs: A. 20-40 ml of ****** B. 50-100 ml of ****** C. 120-180 ml of ****** D. 200-300 ml of ******

Description : What is considered to be the safe limit of daily alcohol consumption by an adult man in the absence of contraindications and interacting drugs: A. 20-40 ml of whisky B. 50-100 ml of whisky C. 120-180 ml of whisky D. 200-300 ml of whisky

Last Answer : B. 50-100 ml of whisky

P and Q can do a piece of job in 24 days; Q and R can do it in 30 days while R and P can finish it in 40 days. If P, Q, Rworks together, in how many days will they finish the job? In how many days will each one of them finish it, working alone? A) 15,25,35,45 B) 20,30,40,120 C) 20,30,40,50 D) 20,25,30,60

Description : P and Q can do a piece of job in 24 days; Q and R can do it in 30 days while R and P can finish it in 40 days. If P, Q, Rworks together, in how many days will they finish the job? In how many days will each ... finish it, working alone? A) 15,25,35,45 B) 20,30,40,120 C) 20,30,40,50 D) 20,25,30,60 

Last Answer : B Time taken by (P + Q) to finish the job = 24days. (P + Q)'s 1 day's job = 1/24 Time taken by (Q +R) to finish the job = 30days. (Q + R)'s 1 day's job = 1/30 Time taken by (R + P) to finish the ... - {(P + Q)'s 1 day's job } = (1/20 -1/24)=1/120 Hence, R alone can finish the job in 120 days.