Sketch a layout of Front Engine Rear Wheel Drive vehicle & label the major parts

Sketch a layout of Front Engine Rear Wheel Drive vehicle & label the major parts
by

1 Answer

Answer :

image

Fig:- Front EngineRear Wheel Drive Vehicle Layout

by

Related questions

Draw a neat layout of front engine front wheel drive and label it.

Description : Draw a neat layout of front engine front wheel drive and label it.

Last Answer : Figure: Front Engine Front Wheel Drive

Explain construction of Hotchkiss drive with suitable sketch

Description : Explain construction of Hotchkiss drive with suitable sketch

Last Answer : Hotchkiss drive: Explanation: Construction:- This drive is invented by Albert Hotchkiss. In the Hotchkiss drive two universal joints are used one at front and second at rear end of propeller shaft ... torque reaction leaf spring deflects. It is used in heavy duty vehicles like bus and trucks.

Illustrate with the sketch functional relationship of major components of power transmission system

Description : Illustrate with the sketch functional relationship of major components of power transmission system

Last Answer : Fig:- major assembly & There location on chassis frame 1. Chassis Frame: - it is backbone of vehicle. all sub systems mounted on chassis frame 2. Engine:-it is heart of vehicle ... 7. Wheels & Tyres:-it carry weight of vehicle , transmit driving thrust, absorb road shocks

Describe a method of lubrication for rear axle assembly of the truck.

Description : Describe a method of lubrication for rear axle assembly of the truck.

Last Answer : The combined lubrication system is very important in the final drive axle, where load and or speed transferred are high, the combination of splash and force feed of lubricant is delivered to ... trickles down due to gravity into the sump, where it is collected again and the cycle repeats  

Describe with sketch construction of tubeless tyre & state its two advantages over Tube type

Description : Describe with sketch construction of tubeless tyre & state its two advantages over Tube type

Last Answer : This type of tyre does not need separate tube, instead the air under pressure is filled in the tyre for which purpose a non return valve is fitted to the rim. The tyre is directly mounted on the ... safety:- in case of puncture air defuses slowly which provide safety to driver as well as other.

Describe with neat sketch working of full floating type.

Description : Describe with neat sketch working of full floating type.

Last Answer : Fig:- full floating Rear axle Explanation: The figure shows the full floating axle. The wheel is on the axle casing. Two roller bearings are between the wheel and axle casing. ... supported by the wheel and the axle casing. Fully floating rear axle is used in heavy commercial vehicles 

Describe with sketch the method of lubrication of synchromesh gearbox

Description : Describe with sketch the method of lubrication of synchromesh gearbox

Last Answer : Splash lubrication system : The splash lubricating system is simple to manufacture and implement in synchromesh gearbox. Lay shaft gear revolutions splash up lubricant from the sump to provide adequate ... the gear box 3. Selector mechanism is lubricated by thin machine oil/engine oil

Describe with neat sketch construction details of clutch plate.

Description : Describe with neat sketch construction details of clutch plate.

Last Answer : Fig:- Single Plate Clutch Constructional details : It consist of steel plate with a splined central hub. Annular friction facing are attached to the steel plates by rivets. Special resins are ... are similar type of slots in each of the two plates situated on either side of the hub flang 

Describe the working of motorcycle clutch with neat sketch.

Description : Describe the working of motorcycle clutch with neat sketch.

Last Answer : Working : While the flywheel is rotating the pressure plates rotate and press against the friction plate. This causes the friction plates and thus the clutch shaft to rotate as well. When the pedal is ... they are not fully pressed by pressure plates. Thus the shaft also stops rotation. 

Describe working of continuously variable transmission with suitable sketch

Description : Describe working of continuously variable transmission with suitable sketch

Last Answer : A Vario-drive consists of two set of split pulleys - drive and driven pulley and drive belt between the pulleys. The drive pulley is fitted to the crankshaft and driven to rear wheel ... driven pulley gets decreased thus a reduced drive ratio between the driven and drive pulleys is obtained.

Describe with schematic sketch working of Vacuum operating clutch mechanism

Description : Describe with schematic sketch working of Vacuum operating clutch mechanism

Last Answer : Fig:- Vacuum Operated Clutch linkage -Vacuum operated clutch linkage operated by engine Vacuum created during suction stroke -It consists of vacuum reservoir tank connected to engine ... piston & plunger which further connected to release fork & release bearing as shown in fig

Explain any one type of Frame section with neat sketch

Description : Explain any one type of Frame section with neat sketch

Last Answer : four section of chassis frame with their merits Channel Section: The channel section is used for making the long members of the frame. It provides a good resistance to bending. It is poor ... to torsional loading (twisting) and they shall not use in the cases where torsion is dominant. 

Distinguish among radial ply, cross ply & belted bias types tyres

Description : Distinguish among radial ply, cross ply & belted bias types tyres

Last Answer : Sr. No. Radial ply tyre Cross ply tyre Belted bias Type  1 Plies are running radially straight from bead to bead Piles are running diagonally opposite from bead to bead. The basic construction is ... tyre. Costlier than radial ply & cross ply tyre 8

Compare dry clutch & wet clutch on basis of

Description : Compare dry clutch & wet clutch on basis of

Last Answer : Parameter Dry Clutch Wet Clutch Construction When the clutch is operated dry i.e. without oil, it is called as a dry clutch. When the clutch is operated in an oil bath, it is ... , Bus, Truck etc. Multi-plate clutch is used in motor cycles, racing cars, heavy duty vehicles.

State the function of Slip joint & universal Joint

Description : State the function of Slip joint & universal Joint

Last Answer : 1)Slip joint Functions: When the rear wheel comes across a bump, the spring compresses or expands as the differential with the rear axle housing and the wheel moves up and down. This ... drive changes continuously and universal joint allows transmission of power and rotary motion at a varied angle

Is my 2016 Chrysler Town and Country front or rear wheel drive?

Description : Is my 2016 Chrysler Town and Country front or rear wheel drive?

Last Answer : A 2016 Chrysler Town and Country is front wheel drive.

Describe with schematic diagram working of constant mesh gearbox

Description : Describe with schematic diagram working of constant mesh gearbox

Last Answer : -In constantmesh gearbox all the gears on the mainshaft are constantly mesh with layshaft gear & freely rotate on mainshaft. -When the clutch is in engaed position & gears ... than direction of mainshaft becomes reverse & reverse gear ratio obtained which is near about 3:1

In modern car synchromesh gearbox is preferred over constant mesh gearbox. Justify its application with suitable illustration

Description : In modern car synchromesh gearbox is preferred over constant mesh gearbox. Justify its application with suitable illustration

Last Answer : Reason of synchromesh gear box preferred over constant mesh gearbox  1) No need of double declutching as in case of constant mesh gearbox.  2) Smooth engagement of higher gears due to synchromesh ... lay shaft gears to main shaft gear and then to the main shaft through synchronizer device 

What are the different materials used for clutch lining? State its necessity.

Description : What are the different materials used for clutch lining? State its necessity.

Last Answer : Material:- 1. Leather 2. Cork 3. Fabric 4. Asbestos 5. Reybestos and Ferodo 6. Non- asbestos clutch lining material Necessity:- 1. It should have good anti fading characteristic 2. It should have longer life. 3. It should be nonpolluting. 4. It should have lesser cost

Describe advantages of torque converter over manual transmission system

Description : Describe advantages of torque converter over manual transmission system

Last Answer : Advantages of torque converter : 1. Torque converter varies gear ratio in the range of 3:1 to 1:1 in infinite no. of stages which gives uniform acceleration 2. No need of operating ... avoiding manual interference of gear changing. 4. It allows starting & stopping vehicle without any difficulty.

Explain the concept of Aspect Ratio.

Description : Explain the concept of Aspect Ratio.

Last Answer : Aspect Ratio: The aspect ratio of a tyre is the height of the tyre sidewall expressed as a percentage of the tyre’s width. For example, a tyre with a profile/aspect ratio of 65, is a tyre whose height is equal to 65% of its width. 

State the purpose of Transfer case

Description : State the purpose of Transfer case

Last Answer : 1. Transfer case is used in four wheel drive vehicle along with main gearbox to transmit torque and power to the rear axle. 2. It enables the driver to drive the vehicle in two wheel drives on ... applications.  3. It also enables to drive the vehicle in high gear or low gear whenever required.

Write a function of Automobile Clutch

Description : Write a function of Automobile Clutch

Last Answer : To engage and disengage the engine power from transmission as required when the vehicle is to stop by applying brakes. To facilitate the easy gear shifting from 1st to 2nd or from ... in transmission by providing suitable means. To reduce the vibrations during high speed power transmission

Enlist different material used in Frames

Description : Enlist different material used in Frames

Last Answer : 1) Mild steel 2) Carbon steel 3) Nickel alloy steel 4) Aluminum alloy. 02 

State the necessity of Frame in Automobile.

Description : State the necessity of Frame in Automobile.

Last Answer : 1. To support the body and chassis components such as engine, gear box, axles, suspension system, braking system etc. 2. To withstand different types of loads acting on it

State the necessity of Differential on a vehicle. Draw a neat sketch of the Differential unit and label all the parts.

Description : State the necessity of Differential on a vehicle. Draw a neat sketch of the Differential unit and label all the parts.

Last Answer : Need of Differential in automobile: 1) When vehicle is taking turn outer wheel will have to travel greater distance as compared to inner wheel. 2). If the vehicle has a solid rear axle only and no other ... turn, at the same time keep the speed of rear wheel same when going straight ahead.

Front and rear wheel axle bearings may be washed and replaced once in a) four years b) three years c) two years d) one year

Description : Front and rear wheel axle bearings may be washed and replaced once in a) four years b) three years c) two years d) one year

Last Answer : d) one year

pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Description : pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Last Answer : ans a

Handbrake is applicable to A. Only front wheels B. Only rear wheels C. Both front and rear wheel. D. All of the above.

Description : Handbrake is applicable to A. Only front wheels B. Only rear wheels C. Both front and rear wheel. D. All of the above.

Last Answer : B. Only rear wheels

Draw neat sketch of valve timing diagram for 4-stroke petrol engine & label it.

Description : Draw neat sketch of valve timing diagram for 4-stroke petrol engine & label it.

Last Answer : Figure: Valve timing diagram of 4 stroke SI engine  

Draw a neat of full floating rear axle. Label all the parts. State an application of Semi floating, three quarter floating and full floating rear axle.

Description : Draw a neat of full floating rear axle. Label all the parts. State an application of Semi floating, three quarter floating and full floating rear axle.

Last Answer : Semi floating: light motor vehicle three quarter floating:light motor vehicle full floating rear axle: heavy commercial vehicles

Draw a neat sketch of cross-section of an exogenous tree and label the parts.

Description : Draw a neat sketch of cross-section of an exogenous tree and label the parts. 

Last Answer : Cross-section of an exogenous tree:

Draw a neat sketch of prismatic compass and label its component parts

Description : Draw a neat sketch of prismatic compass and label its component parts

Last Answer : Sketch of prismatic compass and label its component parts

Define folds and draw neat sketch of a fold and label its different parts.

Description : Define folds and draw neat sketch of a fold and label its different parts. 

Last Answer : Fold: Folds may be defined as undulations or bends that are developed in the rock of the Earth’s crust, as a result of stresses (commonly lateral compression) To which these rocks have been subjected to, from time to time in the past history of the Earth.

Draw a neat sketch of a hollow propeller shaft. Label all the parts. State the necessity of Universal joint.

Description : Draw a neat sketch of a hollow propeller shaft. Label all the parts. State the necessity of Universal joint.

Last Answer : Necessity of universal joint: ● A universal joint is used where two shafts are connected at an angle to transmit the torque. ● Universal joint is used to transmit motion at varying angles.

Draw a neat sketch of Transfer case arrangement. Label all the parts and state the application of transfer case in Automobiles.

Description : Draw a neat sketch of Transfer case arrangement. Label all the parts and state the application of transfer case in Automobiles. 

Last Answer : Working of transfer case: When the shifter-A is at the central position as shown in fig. here neither the gear G1and nor the gear G2 is connected to the input shaft, it is known as neutral ... in four wheel drive vehicle along with main gearbox to transmit torque and power to the rear axle. 

Draw a neat sketch of hydraulically operated clutch and label all parts.

Description : Draw a neat sketch of hydraulically operated clutch and label all parts.

Last Answer : hydraulically operated clutch

Draw a diagram of the front view of human heart and label any six parts including at least two, that are concerned with arterial blood supply to the heart muscles. -Biology

Description : Draw a diagram of the front view of human heart and label any six parts including at least two, that are concerned with arterial blood supply to the heart muscles. -Biology

Last Answer : This is the Answer.

How often do you drive with both your hands on the steering wheel of your vehicle?

Description : How often do you drive with both your hands on the steering wheel of your vehicle?

Last Answer : About 90% of the time. That’s my default way to drive, unless holding a map or a cup of coffee.

What states require front & rear license plate installation on cars?

Description : What states require front & rear license plate installation on cars?

Last Answer : All states EXCEPT: Alabama, Arizona, Arkansas, Delaware, Florida, Georgia, Indiana, Kansas, Kentucky, Louisiana, Michigan, Mississippi, New Mexico, North Carolina, Oklahoma, Pennsylvania, South Carolina, Tennessee, and West Virginia

Which Bus connects CPU & level 2 cache: a. Rear side bus b. Front side bus c. Memory side bus d. None of these

Description : Which Bus connects CPU & level 2 cache: a. Rear side bus b. Front side bus c. Memory side bus d. None of these

Last Answer : b. Front side bus

I would like to tow my automatic front wheel drive Jetta behind my motorhome. Can i do this without buying a dolly?

Description : I would like to tow my automatic front wheel drive Jetta behind my motorhome. Can i do this without buying a dolly?

Last Answer : No. No automatic car should be moved with its driving wheels on the ground unless it is actually driving, not even in neutral. The difference in rotation speeds between the different shafts in the transmission will cause it to burn out, and you will need a new or a reconditioned transmission.

List any two major requirements of fuel injection system. Draw a layout of fuel injection system used in diesel engine.

Description : List any two major requirements of fuel injection system. Draw a layout of fuel injection system used in diesel engine.

Last Answer : Requirements of fuel injection system 1) Metering - The fuel injection system must measure the fuel supplied to the engine very accurately as fuel requirements vary from low to high engine speeds. 2) Time- ... and stop injection- The injection fuel must start and end quickly.  OR

The car has a locked rear wheel.

Description : The back wheel of the Favorit has blocked and is not moving.

Last Answer : Take a log about 30 cm long with a diameter of 2-3 cm. (eg a long extension from the Gola set) Lean it against the brake drum through a hole in the disc and tap it with a larger hammer. ... The brake will release at 90 percent. All this on a car with the parking brake enabled and number one engaged.

Explain Bicycle Rear Wheel Sprocket Working?

Description : Explain Bicycle Rear Wheel Sprocket Working?

Last Answer : Rear wheel sprocket works under the principle of ratchet and pawl.

Draw neat sketch to show TBI system of SI engine and name its parts.

Description : Draw neat sketch to show TBI system of SI engine and name its parts.

Last Answer : Draw neat sketch to show TBI system of SI engine and name its parts.

State types of plant layouts. Describe product layout with neat sketch.

Description : State types of plant layouts. Describe product layout with neat sketch.

Last Answer : Types of plant layout: 1. Product or line layout 2. Process or functional layout 3. Fixed or static layout 4. Combination layout. Product layout: 1. This layout is ... line without back-tracking or cross-movements and finally the end product leaves from the other end of the line.

Explain product layout with a neat sketch.

Description : Explain product layout with a neat sketch. 

Last Answer : Product layout  1. This layout is also called flow-line layout, line layout or production line layout. In this layout, the machines, equipment and work centers are arranged in a straight or ... the other end of the line. 4. Examples are automobile assembly lines, bottling plant and so on

Define plant layout. Explain in detail 'Process layout' with neat sketch.

Description : Define plant layout. Explain in detail 'Process layout' with neat sketch.

Last Answer : Definition of Plant layout It is defined as the systematic arranging of various facilities like equipments, machines manpower, and inspection areas, etc and services within the area  of plant ... required for product manufacturing Less cost of investment General purpose machines are used

Sketch and describe the layout of series hybrid vehicles.

Description : Sketch and describe the layout of series hybrid vehicles. 

Last Answer : Series-Hybrid vehicle  In Series Hybrid vehicles, the Internal Combustion Engine (ICE) drives a generator, which charges the battery and supplies current to the electronically controlled motor. The ... drive have to be rated to the maximum power. It has low overall system efficiency.