Is polypropylene biodegradable?

1 Answer

Answer :

Polypropylene can be biodegradable if it is made with EBD(enhanced bio decompositions) which can be easily broken down,fairly quickly, back to base compounds. A variety of packaging cannow use biodegradable polypropylene.

Related questions

Description : What is the difference between polypropylene and PVC?

Last Answer : PVC is the most common plastic used in book covering materials, and has been used for many years. Polypropylene has become more common recently. Both of these plastics have different handling characteristics. PVC is ... plastic. PVC is known to have a low level of acidity. PVC is cheaper than PP.

Description : Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Last Answer : (1) Polyamide Explanation: Nylon is a generic designation for a family of synthetic polymers known generically as aliphatic polyamides. It is one of the most commonly used polymers.

Description : Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Last Answer : (B) Polyacrylonitrile

Description : __________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane

Last Answer : (B) Polystyrene

Description : Commercial production of polypropylene employs __________ polymerisation. (A) Emulsion (B) Suspension (C) Solution (D) Bulk

Last Answer : (C) Solution

Description : Which of the following is a copolymer? (A) Polystyrene (B) SBR (C) PTFE (D) Polypropylene

Last Answer : (B) SBR

Description : In step growth polymerisation, condensation occurs in a stepwise manner with or without the elimination of smaller molecules. An example of step growth polymerisation product is (A) Terylene (B) Polybutadiene (C) PVC (D) Polypropylene

Last Answer : (A) Terylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

Description : Benzoyl chloride is not used as a catalyst in the manufacture of (A) Polystyrene (B) Polyvinyl acetate (C) Polypropylene (D) Polyvinyl chloride-co-vinyl acetate

Last Answer : (C) Polypropylene

Description : Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C

Description : __________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

Last Answer : (A) Nylon-66

Description : Hot drink (e.g., tea) cups are usually made of (A) Polystyrene (B) Polythene (C) Polypropylene (D) PVC

Last Answer : (A) Polystyrene

Description : Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Last Answer : (B) PVC

Description : Which of the following is not a polyolefin? (A) Polystyrene (B) Polypropylene (C) Neoprene (D) None of these

Last Answer : (C) Neoprene

Description : Contact lenses for eyes are made of Perspex, which is nothing but (A) poly-methyl-methacrylate (B) Polystyrene (C) Unsaturated polyester (D) Polypropylene

Last Answer : (A) poly-methyl-methacrylate

Description : Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester

Last Answer : (B) Low density polyethylene (LDPE)

Description : Liners of bags are usually made of (A) Polythene (B) PVC (C) Polypropylene (D) Polyesters

Last Answer : (C) Polypropylene

Description : Identify the group in which all the polymers mentioned can be used to make fibres. (A) Butadiene copolymers, Polyamides, Urea-formaldehyde (B) Cellulose derivatives, Polyisoprene, Polyethylene (C) Cellulose derivatives, Polyamides, Polyurethane (D) Polypropylene, Poly vinyl chloride, Silicon

Last Answer : (B) Cellulose derivatives, Polyisoprene, Polyethylene

Description : Polypropylene compared to polythene is (A) Harder (B) Stronger (C) Lighter (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : The most commonly used resin for making reinforced plastic is (A) Unsaturated polyester (B) Polypropylene

Last Answer : (A) Unsaturated polyester

Description : Color development in tomato fruit is due to a. Lycopene b. Carotenoid c. Polypropylene d. All of above

Last Answer : Lycopene

Description : Which of the following are condensation polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) Both II and III

Last Answer : Only III

Description : Which of the following are addition polymers? I. Polypropylene II. Teflon III. Nylon (a) Only I (b) Only II (c) Only III (d) both I and II

Last Answer : both I and II

Description : Which of the following is an example of a condensation polymer? (a) Nylon-6,6 (b) Teflon (c) Polypropylene (d) Orlon

Last Answer : Nylon-6,6

Description : Which of following statements is false about propane? (a) all bond angles are 109.5° (b) each carbon is sp3 hybridized (c) the compound is combustible (d) the compound undergoes polymerization to give polypropylene.

Last Answer : the compound undergoes polymerization to give polypropylene.

Description : Insulation of liquid surface can be achieved by __________ on top of its surface. (A) Floating hollow polypropylene spheres (B) Spraying alumina powder (C) Putting cement (D) None of these

Last Answer : (A) Floating hollow polypropylene spheres

Description : The method of addition polymerization is used for obtaining: (A) Polystyrene (B) Polypropylene (C) Polyvinylchloride (D) All of thesea

Last Answer : Answer: Option D

Description : Nylon is made up of : (1) Polyamide (2) Polyester (3) Polyethylene (4) Polypropylene

Last Answer : Polyamide

Description : Where can I find biodegradable car wash soap?

Last Answer : I did some research on this a while ago and I was surprised to find that biodegradable soaps can be poisonous to crabs, oysters, and rockfish, damaging gills and depleting the water of oxygen. If you wash ... on a grass or gravel surface so it has some time to filter before it reaches a storm drain.

Description : are magnolia leaves biodegradable

Last Answer : Need Answer

Description : (i) Mention any two sources of waste.(ii) What are Biodegradable waste ? -Geography

Last Answer : (i) Two sources of wastes are : 1. Domestic Waste 2. Industrial Waste (ii) Biodegradable Waste: Waste produced by plants and animals, kitchen, paper, green waste etc that can be broken down in a reasonable amount of time through microbial activities of fungi and bacteria.

Description : (i) What is understood by biodegradable waste ? (ii) State one source of gaseous waste. -Geography

Last Answer : (i) Biodegradable waste is a type of waste which can be broken down in a reasonable amount of time, into its base compounds by micro organisms and other living things regardless of what those ... CO2. Methane comes out from cattle shed. Swamps, coal mines etc. Volcanic erruptions gives out SO2.

Description : Differentiate Biodegradable and Non-biodegradable waste. -SST 10th

Last Answer : Biodegradable Non-biodegradable The biodegradable wastes break down and decompose by microorganism like bacteria and fungi in the soil. e.g. Wood, Paper etc. Non-biodegradable waste includes that material which does not breakdown or decompose in the soil. e.g. Plastics, Poly- bags etc.

Description : If all the waste we generate is biodegradable, will this have no impact on the environment? -Biology

Last Answer : Biodegradable waste will be recycled easily by the decomposers such as bacteria and fungi. It will have only this bad impact on our environment that, many Of the gases released during decomposition process may result in global warming.

Description : What are the problems caused by the non-biodegradable wastes that we generate? -Biology

Last Answer : (i) Non-biodegradable wastes persist in the environment for a long time and cause greater harm to the various members of the ecosystem by causing biological magnification. (ii) Non-biodegradable ... the soil chemistry. in turn affects the fertility of soil and subsequently reduces the crop yield.

Description : Give any two ways in which non-biodegradable substances would affect the environment. -Biology

Last Answer : These inert substances simply persist in the environment. This means that these substances require land area for dumping. Excess of fertilizers, pesticides and other chemicals changes soil ... chemicals and heavy metal are easily absorbed by the organisms. This causes biological magnification.

Description : If all the waste we generate is biodegradable, will this have no impact on the environment ? -Biology

Last Answer : If all the waste we generate is biodegradable, it will also have impact on the environment. If it is disposed off properly, the problem of air, water and soil pollution can be lessened to an ... be disease-free. But if it is not disposed off properly, it will affect the environment adversely.

Description : What are the problems caused by the non-biodegradable wastes that we generate ? -Biology

Last Answer : The problems caused by the non-biodegradable wastes are : If the quantity of non-biodegradable matter increases in the nature then bio-magnification of poisonous chemicals in our body ... for new organisms. The increasing quantity of non-biodegradable waste will cause imbalance of ecosystem.

Description : Give any two ways in which non-biodegradable substances would effect the environment. -Biology

Last Answer : (i) They cause air, water and soil pollution. (ii) They may cause bio-magnification in the food chain and end up in humans.

Description : Give any two ways in which biodegradable substances would affect the environment. -Biology

Last Answer : (i) Biodegradable substances are decomposed by the action of microorganisms and decomposed materials are recycled through geo-chemical cycle. (ii) These substances keep the environment clean.

Description : Why are some substances biodegradable and some non-biodegradable ? -Biology

Last Answer : The microorganism like bacteria and other decomposer organisms (called saprophytes) present in our environment are specific in their action. They break down the materials or products made from ... in their action that some waste materials are biodegradable, whereas others are non-biodegradable.

Description : Examples of biodegradable pollutants? -Biology

Last Answer : answer:

Description : Examples of non biodegradable wastes. -Biology

Last Answer : answer:

Description : What are biodegradable pollutants? -Biology

Last Answer : answer:

Description : What are non biodegradable pollutants? -Biology

Last Answer : answer:

Description : Examples of biodegradable pollutants? -Biology

Last Answer : answer:

Description : Examples of non biodegradable wastes. -Biology

Last Answer : answer:

Description : What are biodegradable pollutants? -Biology

Last Answer : answer:

Description : What are non biodegradable pollutants? -Biology

Last Answer : answer:

Description : Which industry produces the most non-biodegradable wastes? -Do You Know?

Last Answer : answer: