Commercial production of polypropylene employs __________ polymerisation. (A) Emulsion (B) Suspension (C) Solution (D) Bulk

Commercial production of polypropylene employs __________
polymerisation.
(A) Emulsion
(B) Suspension
(C) Solution
(D) Bulk
by

1 Answer

Answer :

(C) Solution
by

Related questions

Styrene butadiene rubber is commercially manufactured by (A) Bulk polymerisation (B) Suspension polymerisation (C) Solution polymerisation (D) Emulsion polymerisation

Description : Styrene butadiene rubber is commercially manufactured by (A) Bulk polymerisation (B) Suspension polymerisation (C) Solution polymerisation (D) Emulsion polymerisation

Last Answer : (D) Emulsion polymerisation

Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation(A) PVC(B) Bakelite(C) PTFE(D) Epoxy resin

Description : Which of the following polymers are produced by employing all bulk polymerisation, solution polymerisation & suspension polymerisation technique of addition (chain) polymerisation (A) PVC (B) Bakelite (C) PTFE (D) Epoxy resin

Last Answer : (A) PVC

Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Description : Polyvinyl chloride (PVC) (A) Is produced by Polycondensation reaction (B) Uses either emulsion or suspension polymerisation methods (C) Can be made thermosetting by adding a plasticiser (D) Softening temperature is 200°C

Last Answer : (B) Uses either emulsion or suspension polymerisation methods

Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Description : Pick out the wrong statement. (A) Cold SBR is superior as compared to hot SBR (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement(A) Cold rubber (SBR) is superior as compared to hot rubber (SBR)(B) Polymerisation temperature can modify the properties of SBR(C) Production of cold SBR employs lower pressure as compared to that ofhot SBR(D) None of these

Description : Pick out the wrong statement (A) Cold rubber (SBR) is superior as compared to hot rubber (SBR) (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Milk is fat dispersed in water. It is an example of (A) Suspension (B) Emulsion (C) Gel (D) Solution

Description : Milk is fat dispersed in water. It is an example of (A) Suspension (B) Emulsion (C) Gel (D) Solution

Last Answer : (B) Emulsion

Temperature maintained in the emulsion polymerisation reactor for PVC manufacture is about __________ ° C. (A) -20 (B) 50 (C) 250 (D) 500

Description : Temperature maintained in the emulsion polymerisation reactor for PVC manufacture is about __________ ° C. (A) -20 (B) 50 (C) 250 (D) 500

Last Answer : (B) 50

Milk is an example of - (1) suspension (2) true solution (3) emulsion (4) gel

Description : Milk is an example of - (1) suspension (2) true solution (3) emulsion (4) gel

Last Answer : (3) emulsion Explanation: Milk is an example of the oil-inwater type of emulsion. In milk liquid fat globules are dispersed in water. Other examples are, vanishing cream etc.

Milk is a natural – (1) Solution (2) Emulsion (3) Mixture (4) Suspension

Description : Milk is a natural – (1) Solution (2) Emulsion (3) Mixture (4) Suspension

Last Answer : (2) Emulsion Explanation: An emulsion is a mixture of two or more liquids that are normally immiscible (nonmixable or unblendable). Emulsions are part of a more general class of two-phase systems of ... an emulsion, one liquid (the dispersed phase) is dispersed in the other (the continuous phase).

A mixture of benzene and toluene forms (1) Non-ideal solution (2) Ideal solution (3) Emulsion (4) Suspension

Description : A mixture of benzene and toluene forms (1) Non-ideal solution (2) Ideal solution (3) Emulsion (4) Suspension

Last Answer : (2) Ideal solution Explanation: A mixture of benzene and toluene (60 mole% toluene) enters a distillation column to be separated into two product streams.

Milk is a natural (1) Solution (2) Emulsion (3) Mixture (4) Suspension

Description : Milk is a natural (1) Solution (2) Emulsion (3) Mixture (4) Suspension

Last Answer : Emulsion

In step growth polymerisation, condensation occurs in a stepwise manner with or without the elimination of smaller molecules. An example of step growth polymerisation product is (A) Terylene (B) Polybutadiene (C) PVC (D) Polypropylene

Description : In step growth polymerisation, condensation occurs in a stepwise manner with or without the elimination of smaller molecules. An example of step growth polymerisation product is (A) Terylene (B) Polybutadiene (C) PVC (D) Polypropylene

Last Answer : (A) Terylene

. Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Last Answer : (C) Made by employing emulsion polymerisation

SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1

Description : SBR is produced by the copolymerisation of butadiene & styrene by employing emulsion polymerisation. The weight ratio of styrene and butadiene is maintained at (A) 1: 3 (B) 3 : 1 (C) 1 : 2 (D) 2 : 1

Last Answer : (A) 1: 3

. Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these

Last Answer : (C) Made by employing emulsion polymerisation

Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Last Answer : (B) Thermosetting

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Last Answer : (B) Employs condensation polymerisation

Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Description : Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Last Answer : (B) Achieves an yield of 95-98% based on ethylene

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Last Answer : (B) Employs condensation polymerisation

Is suspension and emulsion the same ?

Description : Is suspension and emulsion the same ?

Last Answer : Suspension is a mixture of solid and liquid. Emulsion, on the other hand, is a mixture of liquids of the same nature. For example, antacids or a mixture of Mg (OH) 2 in water is a suspension and emulsion is a mixture that is obtained by stirring oil in a water bottle.

Milk is - (1) Emulsion (2) Suspension (3) Foam (4) Gel

Description : Milk is - (1) Emulsion (2) Suspension (3) Foam (4) Gel

Last Answer : (1) Emulsion Explanation: An emulsion is a mixture of two liquids that cannot combine into a solution. In the case of milk, butterfat globules are suspended in a water-based fluid. The globules are encased in membranes that prevent them from combining into giant lumps of butterfat.

Bitumen emulsion is (A) A liquid containing bitumen in suspension (B) A paint (C) Used as anti-corrosive paint (D) All the above

Description : Bitumen emulsion is (A) A liquid containing bitumen in suspension (B) A paint (C) Used as anti-corrosive paint (D) All the above

Last Answer : Answer: Option D

Milk is (1) Emulsion (2) Suspension (3) Foam (4) Gel

Description : Milk is (1) Emulsion (2) Suspension (3) Foam (4) Gel 

Last Answer : Emulsion

Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Description : Most of the fibre forming polymers are crystalline in nature, one of the exceptions being __________ which is amorphous in nature. (A) Nylon (B) Polyacrylonitrile (C) Polypropylene (D) Polyester

Last Answer : (B) Polyacrylonitrile

__________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane

Description : __________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane

Last Answer : (B) Polystyrene

Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Description : Melt spinning of polymers involves the forcing of polymer melt through spinnerates (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter ... the __________ fibres. (A) Acrylic (B) Polyester (C) Nylon 6:6 (D) Polypropylene

Last Answer : (A) Acrylic

__________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

Description : __________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC

Last Answer : (A) Nylon-66

Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Description : Vinyl flooring is done using __________ sheets. (A) Polypropylene (B) PVC (C) Polythene (D) Polyvinyl acetate

Last Answer : (B) PVC

Insulation of liquid surface can be achieved by __________ on top of its surface. (A) Floating hollow polypropylene spheres (B) Spraying alumina powder (C) Putting cement (D) None of these

Description : Insulation of liquid surface can be achieved by __________ on top of its surface. (A) Floating hollow polypropylene spheres (B) Spraying alumina powder (C) Putting cement (D) None of these

Last Answer : (A) Floating hollow polypropylene spheres

Shampoos are commercially not available in the form of (A) Powder (B) Gaseous mixture (C) Solution (D) Emulsion

Description : Shampoos are commercially not available in the form of (A) Powder (B) Gaseous mixture (C) Solution (D) Emulsion

Last Answer : Option B

Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Description : Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Last Answer : (A) 7 kgf/cm2 and 70 °C

Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Description : Polymerisation reactor used for the production of styrene butadiene rubber (SBR) is made of (A) Cast iron (B) Stainless steel or glass lined vessel (C) Karbate (D) Wrought iron

Last Answer : (B) Stainless steel or glass lined vessel

Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Description : Polymerisation reactor used in the production of styrene butadiene rubber (SBR) is made of (A) Stainless steel or glass lined steel (B) Nickel clad steel (C) High silicon cast iron (D) Aluminium

Last Answer : (A) Stainless steel or glass lined steel

How are solution a and a emulsion different?

Description : How are solution a and a emulsion different?

Last Answer : What is the answer ?

An emulsion is a colloidal solution of - (1) Liquid in liquid (2) Solid in liquid (3) Gas in solid (4) Solid in Solid

Description : An emulsion is a colloidal solution of - (1) Liquid in liquid (2) Solid in liquid (3) Gas in solid (4) Solid in Solid

Last Answer : (1) Liquid in liquid Explanation: An emulsion is a mixture of two or more liquids that are normally immiscible (unmixable or unblendable). Emulsions are part of a more general class ... of emulsions include vinaigrettes, homogenized milk, mayonnaise, and some cutting fluids for metal working.

An alloy is an example of : (1) Colloidal solution (2) Emulsion (3) Solid solution (4) Heterogeneous mixture

Description : An alloy is an example of : (1) Colloidal solution (2) Emulsion (3) Solid solution (4) Heterogeneous mixture

Last Answer : (3) Solid solution Explanation: A Solid solution is a uniform mixture of substances in solid form.

When amphipathic lipids are mixed in water, what do they form? a. Emulsion. b. Solution. c. Micelle. d. Soap

Description : When amphipathic lipids are mixed in water, what do they form? a. Emulsion. b. Solution. c. Micelle. d. Soap

Last Answer : c. Micelle.

Mayonnaise is: w) an emulsion x) a hydrogenated oil y) a covalent solution z) a coalescent solution

Description : Mayonnaise is: w) an emulsion x) a hydrogenated oil y) a covalent solution z) a coalescent solution

Last Answer : ANSWER: W -- AN EMULSION

Mayonnaise is: w) a coalescent solution x) a hydrogenated oil y) a covalent solution z) an emulsion

Description : Mayonnaise is: w) a coalescent solution x) a hydrogenated oil y) a covalent solution z) an emulsion

Last Answer : ANSWER: Z -- AN EMULSION

An emulsion is a colloidal solution of (1) Liquid in liquid (2) Solid in liquid (3) Gas in solid (4) Solid in Solid

Description : An emulsion is a colloidal solution of (1) Liquid in liquid (2) Solid in liquid (3) Gas in solid (4) Solid in Solid

Last Answer :  Liquid in liquid

__________ employs a set of screen across a flow channel for the separation of dirt/rust from a flowing liquid stream. (A) Thickener (B) Classifier (C) Strainer (D) Clarifier

Description : __________ employs a set of screen across a flow channel for the separation of dirt/rust from a flowing liquid stream. (A) Thickener (B) Classifier (C) Strainer (D) Clarifier

Last Answer : (C) Strainer

Extraction of penicillin employs a __________ extraction column. (A) Centrifugal (B) Packed (C) Plate (D) None of these

Description : Extraction of penicillin employs a __________ extraction column. (A) Centrifugal (B) Packed (C) Plate (D) None of these

Last Answer : (A) Centrifugal

Separation of __________ employs gaseous diffusion process. (A) N2 and O2 from air (B) Isotopes of uranium (C) Isotopes of helium (D) SO2 and air

Description : Separation of __________ employs gaseous diffusion process. (A) N2 and O2 from air (B) Isotopes of uranium (C) Isotopes of helium (D) SO2 and air

Last Answer : (B) Isotopes of uranium

Paper industry employs __________ driers.(A) Cylinder (B) Rotary (C) Spray (D) Fluidised bed

Description : Paper industry employs __________ driers. (A) Cylinder (B) Rotary (C) Spray (D) Fluidised bed

Last Answer : (A) Cylinder

A __________ evaporator employs an annular downtake.(A) Basket type (B) Horizontal (C) Long tube vertical (D) None of these

Description : A __________ evaporator employs an annular downtake. (A) Basket type (B) Horizontal (C) Long tube vertical (D) None of these

Last Answer : (A) Basket type

Kopper-Totzek coal gasifier (installed in a coal based nitrogeneous fertiliser plant) employs a/an __________ bed gasifier. (A) Entrained (B) Moving (C) Fixed (D) Fluidised

Description : Kopper-Totzek coal gasifier (installed in a coal based nitrogeneous fertiliser plant) employs a/an __________ bed gasifier. (A) Entrained (B) Moving (C) Fixed (D) Fluidised

Last Answer : (A) Entrained

Cement setting under water employs a/an __________ process. (A) Hydration (B) Decomposition (C) Oxidation (D) Reduction

Description : Cement setting under water employs a/an __________ process. (A) Hydration (B) Decomposition (C) Oxidation (D) Reduction

Last Answer : (A) Hydration

Gas turbine normally employs a constant __________ cycle. (A) Pressure (B) Temperature (C) Volume (D) None of these

Description : Gas turbine normally employs a constant __________ cycle. (A) Pressure (B) Temperature (C) Volume (D) None of these

Last Answer : (A) Pressure

Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280

Last Answer : (D) 250-280

__________ of SBR is adversely affected, if more quantity of styrene is added to butadiene during its co-polymerisation to produce SBR. (A) Percent elongation (B) Resilience (C) Freezing point (D) Strength

Description : __________ of SBR is adversely affected, if more quantity of styrene is added to butadiene during its co-polymerisation to produce SBR. (A) Percent elongation (B) Resilience (C) Freezing point (D) Strength

Last Answer : (B) Resilience