What is the effect of heat on insulating material ?

What is the effect of heat on insulating material ?
by

1 Answer

Answer :

With increasing temperature, the resistance of almost all solid insulators except Avro decreases. When the temperature drops again, the resistance increases.
by

Related questions

What effect does increased heat loss have on resistance ?

Description : What effect does increased heat loss have on resistance ?

Last Answer : As the heat decreases, the resistance decreases. Note: In the case of semiconductors, the resistance increases as the heat decreases. As the heat increases, the resistance increases.

The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Description : The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Last Answer : (B) 2K/h0

Which of the following is the most widely used heat insulating material for pipelines carrying steam? (A) Tar dolomite bricks followed by asbestos (B) Fireclay refractory followed by aluminium sheet (C) Cotton followed by aluminium foil (D) 85% magnesia cement and glass wool

Description : Which of the following is the most widely used heat insulating material for pipelines carrying steam? (A) Tar dolomite bricks followed by asbestos (B) Fireclay refractory followed by aluminium sheet (C) Cotton followed by aluminium foil (D) 85% magnesia cement and glass wool

Last Answer : (D) 85% magnesia cement and glass wool

A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just next to pipe (i.e., inside) (B) The better insulating material should be put outside (C) Either of the insulating material could be put on either side (D) Steam temperature is considered before deciding as to which insulating material is to be put inside (i.e., just next to the pipe)

Description : A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just ... to which insulating material is to be put inside (i.e., just next to the pipe)

Last Answer : (A) The better insulation material should be put just next to pipe (i.e., inside)

A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted will (A) Increase (B) Decrease (C) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Description : A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted ... ) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Last Answer : Option C

What is the effect of resistance , inductance and capacitance in transmission line ?

Description : What is the effect of resistance , inductance and capacitance in transmission line ?

Last Answer : These 3 factors create voltage drop and power loss of the line. The inductive reactance creates a voltage drop across the line and the capacitance creates a charging current.

What is the effect of resistance and reactance on power factor ?

Description : What is the effect of resistance and reactance on power factor ?

Last Answer : Power factor depends on resistance and reactance. As the resistance of the circuit increases, the phase angle between the current and the voltage decreases, resulting in an increase in the power factor ... current and the voltage increases, resulting in a decrease in the power factor of the circuit.

What is Dia Magnetic Material ?

Description : What is Dia Magnetic Material ?

Last Answer : : When a magnet is brought close to some non-magnetic material with a slight repulsion, it is called dia-magnetic substance. Such as: zinc , gold , salt , mercury , rubber , lead , tin.

What is the material for making artificial magnet ?

Description : What is the material for making artificial magnet ?

Last Answer : Synthetic magnets are made by supplying electric current to the cast iron. That means cast iron , wire and current are needed to make artificial magnets .

What is the heat coefficient of resistance ?

Description : What is the heat coefficient of resistance ?

Last Answer : Answer : The coefficient of heat is the amount of radh that increases with the increase in temperature per ohm of radh.

Effect of moisture on the insulating materials is to

Last Answer : Effect of moisture on the insulating materials is to decrease dielectric constant, decrease dielectric strength, decrease insulation resistance, increase dielectric loss.

Biological functions of lipids include (A) Source of energy (B) Insulating material (C) Maintenance of cellular integrity (D) All of these

Description : Biological functions of lipids include (A) Source of energy (B) Insulating material (C) Maintenance of cellular integrity (D) All of these

Last Answer : Answer : D

Which of the following statements best describes the material known as varnished cambric? A. Felted asbestos sealed with varnish. B. Cotton cloth coated with insulating varnish. C. Rubber insulation coated with a layer of tin. D. Paper impregnated with mineral oil, specially wrapped with nonmetallic tape, and coated with varnish.

Description : Which of the following statements best describes the material known as varnished cambric? A. Felted asbestos sealed with varnish. B. Cotton cloth coated with insulating varnish. C. Rubber ... Paper impregnated with mineral oil, specially wrapped with nonmetallic tape, and coated with varnish.

Last Answer : Answer: B

A circuit breaker differs from a fuse in that a circuit breaker _____________. A. melts and must be replaced B. is enclosed in a tube of insulating material with metal ferrules at each end C. gives no visual indication of having opened the circuit D. trips to break the circuit and may be reset

Description : A circuit breaker differs from a fuse in that a circuit breaker _____________. A. melts and must be replaced B. is enclosed in a tube of insulating material with metal ferrules at each end C. gives no visual indication of having opened the circuit D. trips to break the circuit and may be reset

Last Answer : Answer: D

Which of the following is the most widely used insulating material for steam carrying pipelines? (A) Ceramic fibre blanket (B) Glass wool and 85% magnesia (C) Vermiculite (D) Slag wool

Description : Which of the following is the most widely used insulating material for steam carrying pipelines? (A) Ceramic fibre blanket (B) Glass wool and 85% magnesia (C) Vermiculite (D) Slag wool

Last Answer : (B) Glass wool and 85% magnesia

The compound of silicon used as insulating material for electric motors/appliances is

Description : The compound of silicon used as insulating material for electric motors/appliances is

Last Answer : silicone.

What do you understand by tan delta for a insulating material?

Description : What do you understand by tan delta for a insulating material?

Last Answer : Tan delta measurement is done to find the qualities of insulating material. Tan delta is angle between current due to surface leakage or current due to capacitance and the capacitive current. That is Tan δ = Ir / Ic. 

What is the major factor that makes coaxial cable less susceptible to noisethan twisted-pair cable? A) inner conductor B) diameterof cable C) outer conductor D) insulating material

Description : What is the major factor that makes coaxial cable less susceptible to noisethan twisted-pair cable? A) inner conductor B) diameterof cable C) outer conductor D) insulating material

Last Answer : outer conductor

Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Description : Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Last Answer : (A) Is an electrical insulating material

Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Description : Carnot cycle efficiency depends upon  (a) properties of the medium/substance used  (b) condition of engine  (c) working condition  (d) temperature range of operation  (e) effectiveness of insulating material around the engine.

Last Answer : Answer : d

The disadvantage with paper as insulating material is (a) it is hygroscopic (6) it has high capacitance (c) it is an organic material (d) none of the above

Description : The disadvantage with paper as insulating material is (a) it is hygroscopic (6) it has high capacitance (c) it is an organic material (d) none of the above

Last Answer : (a) it is hygroscopic

The insulating material should have (a) low permittivity (b) high resistivity (c) high dielectric strength (d) all of the above

Description : The insulating material should have (a) low permittivity (b) high resistivity (c) high dielectric strength (d) all of the above

Last Answer : (d) all of the above

The insulating material for cables should (a) be acid proof (b) be non-inflammable (c) be non-hygroscopic (d) have all above properties

Description : The insulating material for cables should (a) be acid proof (b) be non-inflammable (c) be non-hygroscopic (d) have all above properties

Last Answer : (d) have all above properties

The insulating material for a cable should have (a) low cost (b) high dielectric strength (c) high mechanical strength (d) all of the above

Description : The insulating material for a cable should have (a) low cost (b) high dielectric strength (c) high mechanical strength (d) all of the above

Last Answer : (d) all of the above

Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Description : Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Last Answer : (D) Both insulating and dielectric material.

If an insulating material is operated beyond the maximum allowable temperature, its life is (a) drastically increased (b) drastically reduced (c) unaffected (d) none of the above

Description : If an insulating material is operated beyond the maximum allowable temperature, its life is (a) drastically increased (b) drastically reduced (c) unaffected (d) none of the above

Last Answer : (b) drastically reduced

The insulating material used between the commutator segments is normally (a) graphite (b) paper (c) mica (d) insulating varnish

Description : The insulating material used between the commutator segments is normally (a) graphite (b) paper (c) mica (d) insulating varnish

Last Answer : Ans: c

State various thermal insulating materials. State any two properties of insulating material

Description : State various thermal insulating materials. State any two properties of insulating material

Last Answer : Thermal insulating materials: 1) Asbestos 2) Aluminum Foil 3) Thermocol 4) Saw dust 5) Cork board slabs 6) Foam glass 7) Rock Wool 8) Glass Wool 9) ... . h) Presence of Moisture: with the increase in moisture content, the coefficient of thermal conductivity rises greatly

Selection of Insulating Material Practical

Description : Selection of Insulating Material Practical 

Last Answer : Practical Significance The identification and selection of proper insulating materials is required for safe working of electrical appliances. The insulating material separates the electrical conductors ... the material for proper application and write the application in observation space.

Define dielectric failure of electrical insulating material.

Description : Define dielectric failure of electrical insulating material. 

Last Answer : Definition of dielectric failure of electrical insulating material. In the insulating material if the applied voltage is increased gradually then for certain value insulation will break down, ... material vanishes its insulating properties and starts conducting, also known as dielectric failure.

State any two applications of gaseous insulating material used in switchgears.

Description : State any two applications of gaseous insulating material used in switchgears. 

Last Answer : Applications of gaseous insulating material used in switchgears:   1. Non inflammable material (gas) in switchgear. 2. High dielectrical strength material in electrical machine. 3. As a cooling agent in circuit breaker

Properties of Insulating Material

Description : Properties of Insulating Material

Last Answer : i. Thermal conductivity: Thermal conductivity of insulating material should be as possible to reduce the thickness of material. ii. Nonflammable: Insulating material should be fire proof and nonflammable ... and should available easily. v. Strength vi. Chemical Stability. vii. Moisture Resistance.

State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials.

Description : State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials. 

Last Answer : Failure phenomena in insulating material means the dielectric property fails :  The dielectric failure mean the dielectric strength of insulating material reduces due to high voltages or high ... 6. Due to poor maintenance of insulating material there may be possibility dielectric failure 

State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material.

Description : State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material. 

Last Answer :  (i) Application of PVC paper : 1. It is used in slot lining or motor winding insulation purpose 2. For Insulation of Transformer winding (ii) Application of Porcelain : 1. Mainly used for manufacturing ... on withstand temperature : * H' & C' Class of insulation i e. 180° and above 180°C 

State gaseous and liquid insulating material.

Description : State gaseous and liquid insulating material.

Last Answer : i) Gaseous insulating material : 1. Air 2. Nitrogen 3. Hydrogen 4. SF6 ii) liquid insulating material: 1. Transformer oil 2. Capacitor oil 3. Cable oil 4. Pyranol 5. Savotal 6. Savol 7. Vegetable oil 8. Silicon liquids

Explain the requirements of good insulating material.

Description : Explain the requirements of good insulating material.

Last Answer : Requirement of good insulating material are: i) Electrical ii) Mechanical iii) Thermal iv) Chemical (i) Electrical requirement: A good insulating material should have high resistivity and low ... alkalies. It should not absorb water as water reduces insulation resistance and dielectric strength.

Based on temperature withstanding ability, classify insulating material.

Description : Based on temperature withstanding ability, classify insulating material. 

Last Answer : class Temperature withstanding ability in 0C Materials Y 90 Cotton, silk paper and similar organic materials neither impregnated nor immersed in any oil, rubber, PVC. A 105 ... rubber compounds C Above 180  Mica, ceramics, glass, Teflon, quartz, etc. 

List four examples of insulating material and explain any two.

Description : List four examples of insulating material and explain any two.

Last Answer : Examples of insulating materials:  i) Solid: Ceramic, Porcelain, Mica, Glass, Rubber, Resinous, Fibers  ii) Liquid: Synthetic, Mineral etc.  iii) Gaseous: Hydrogen, Air, ... and low hygroscopicity.  Uses: Insulation in electric field, transformer stampings, armature, pole stampings

What is dielectric strength of an insulating material? What is its unit?

Description : What is dielectric strength of an insulating material? What is its unit?

Last Answer : Dielectric Strength: The dielectric strength of an insulating material is the maximum voltage which the insulating medium can withstand without breakdown. Unit is volts per millimeter (V/mm), or kV/mm or kV/cm

What are insulating material?

Description : What are insulating material?

Last Answer : Insulating material: Insulating material is that which offers very high resistance to the flow of current through it.

State the temperature with standing capacity of following class-insulating material class Y, class A, class B, class E. Also state two examples for each.

Description : State the temperature with standing capacity of following class-insulating material class Y, class A, class B, class E. Also state two examples for each.

Last Answer : S.No Class of Insulating material Temperature withstanding capacity 0C  Examples 1 Class Y' 900C Cotton, Silk paper and similar organic materials neither impregnated nor ... E' 1200C  Cotton fabric, synthetic resin enamels. Paper laminates and Powder plastics

Give classification of insulating materials on the basis of state of material and give one application of each.

Description : Give classification of insulating materials on the basis of state of material and give one application of each.

Last Answer : Classification of Insulating material State of material   Application Solid insulating materials Wood, rubber, plastic, PVC, glass, porcelain, mica, Polypropylene film etc.   ... Switchgears, gas pressures cables, circuit breakers, generator cooling systems and X-ray apparatus

For an insulating material, dielectric strength and dielectric loss should be respectively

Description : For an insulating material, dielectric strength and dielectric loss should be respectively   (A) high and high (B) low and high (C) high and low (D) low and low.

Last Answer : For an insulating material, dielectric strength and dielectric loss should be respectively  high and low 

Surface resistance of an insulating material is reduced due to the

Last Answer : Surface resistance of an insulating material is reduced due to the smoky and dirty atmosphere, humidity in the atmosphere.

The insulating material used between the commutator segments is normally?

Last Answer : The insulating material used between the commutator segments is normally mica.

Electrical leads and insulation on a motor should be painted with ____________. A. heat-resisting acrylic B. heat-resisting aluminum C. insulating varnish D. insulating white lead

Description : Electrical leads and insulation on a motor should be painted with ____________. A. heat-resisting acrylic B. heat-resisting aluminum C. insulating varnish D. insulating white lead

Last Answer : Answer: C

The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Description : The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Last Answer : (C) 35°C

Low thermal conductivity of heat insulating materials is due to its (A) Dense structure (B) High proportion of air space (C) High specific heat (D) None of these

Description : Low thermal conductivity of heat insulating materials is due to its (A) Dense structure (B) High proportion of air space (C) High specific heat (D) None of these

Last Answer : (B) High proportion of air space

Consider the following four conditions (1 - 4) and select a correct pair of them as adaptations to environment in desert lizards. Conditions: 1. Burrowing in soil to escape high temperature. 2. Losing heat rapidly from the body during high temperature. 3. Bask in sun when temperature is low. 4. Insulating body due to thick fatty dermis. (a) 3, 4 (b) 1, 3 (c) 2, 4 (d) 1, 2

Description : Consider the following four conditions (1 - 4) and select a correct pair of them as adaptations to environment in desert lizards. Conditions: 1. Burrowing in soil to escape high temperature. 2. Losing heat rapidly from the body during ... to thick fatty dermis. (a) 3, 4 (b) 1, 3 (c) 2, 4 (d) 1, 2

Last Answer : (b) 1, 3