Can a silver coil make a magnetic field?

Can a silver coil make a magnetic field?
by

1 Answer

Answer :

It is the flow of ELECTRICITY that makes the field in a coil.Therefore a coil of any conductor will make a field. Silver is aconductor.
by
selected by

Related questions

The pole faces of U-shaped magnet in a moving coil galvanometer are made concave to a) decrease the strength of magnetic field b) create a non-uniform magnetic field c) make the magnetic field radial d) All of these

Description : The pole faces of U-shaped magnet in a moving coil galvanometer are made concave to a) decrease the strength of magnetic field b) create a non-uniform magnetic field c) make the magnetic field radial d) All of these

Last Answer : c) make the magnetic field radial

A rectangular coil of copper wires is rotated in a magnetic field. The direction of the induced current changes once in each -Physics-10

Description : A rectangular coil of copper wires is rotated in a magnetic field. The direction of the induced current changes once in each -Physics-10

Last Answer : half revolution When a rectangular coil is rotated in magnetic field, the direction of the induced current changes once in half revolution. As a result, the direction of the current in the coil remains the same. In text 13.7 Page:238

Describe an activity to show that the magnetic field lines produced when current is passed through the circular coil. -Biology

Description : Describe an activity to show that the magnetic field lines produced when current is passed through the circular coil. -Biology

Last Answer : Aim : To study the characteristics of magnetic field produced by a current carrying circular coil at its centre. Apparatus Required : Rectangular cardboard having two holes, Thick copper circular coils of different ... the coil.Field lines keep on diverging as we move away from the centre of loop.

When a direct current is connected to the two ends of an electrical coil, a magnetic field is generated. Why?

Last Answer : If a constant current source is connected in time between the two terminals of the coil, the starting electric current generates a magnetic field according to the Biot - Savart Act. You ... Roll_and_And_Record_Word And here: https://en.wikipedia.org/wiki/Biot%E2% 80% 93Savart-t% C3% B6rv% C3% A9ny 

iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel to the magnetic lines of force. Then the coil willa) rotate to maximize the magnetic flux through its plane. b)rotate to minimize the magnetic flux through its plane.c) not experience any torque since the magnetic flux through its plane is zero.d) experience the constant torque equal to NBIA

Description : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel to the magnetic lines of force. Then the coil willa) rotate to maximize the magnetic flux through ... since the magnetic flux through its plane is zero.d) experience the constant torque equal to NBIA

Last Answer : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel ... d) experience the constant torque equal to NBIA

A planar coil having 12 turns carries 15 A current. The coil is oriented with respect to the uniform magnetic field `B= 0.2hati T` such that its direc

Description : A planar coil having 12 turns carries 15 A current. The coil is oriented with respect to the uniform magnetic field `B= 0.2hati T` such that its direc

Last Answer : A planar coil having 12 turns carries 15 A current. The coil is oriented with respect to the ... energy of the coil in the given orientation is

A current of 2 A is made to flow through a coil which has only one turn. The magnetic field produced at the centre is`4pi xx 10^(-6) "Wb"//m^(2).` the

Description : A current of 2 A is made to flow through a coil which has only one turn. The magnetic field produced at the centre is`4pi xx 10^(-6) "Wb"//m^(2).` the

Last Answer : A current of 2 A is made to flow through a coil which has only one turn. The magnetic field produced at the centre is` ... m` C. `0.1 m` D. `0.001 m`

A long wire carries a steady curent . It is bent into a circle of one turn and the magnetic field at the centre of the coil is `B`. It is then bent in

Description : A long wire carries a steady curent . It is bent into a circle of one turn and the magnetic field at the centre of the coil is `B`. It is then bent in

Last Answer : A long wire carries a steady curent . It is bent into a circle of one turn and the magnetic field at the centre of ... ^(2)B` C. `2nB` D. `2n^(2)B`

A square coil of edge I having n turns carries a curent i. it is kept on a smooth horizontal plate. A uniform magnetic field B exists in a direction p

Description : A square coil of edge I having n turns carries a curent i. it is kept on a smooth horizontal plate. A uniform magnetic field B exists in a direction p

Last Answer : A square coil of edge I having n turns carries a curent i. it is kept on a smooth horizontal plate. A uniform ... . `(Mg)/(4niL)` D. `(2Mg)/(niL)`

The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a magnetic field of `5xx10^(-2)` Wb `m^(-2)`. If

Description : The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a magnetic field of `5xx10^(-2)` Wb `m^(-2)`. If

Last Answer : The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a ... D. current sensitivity is `40 deg` `A^(-1)`

The magnetic field at the centre of a circular coil of radius `r` carrying current `l` is `B_(1)`. The field at the centre of another coil of radius `

Description : The magnetic field at the centre of a circular coil of radius `r` carrying current `l` is `B_(1)`. The field at the centre of another coil of radius `

Last Answer : The magnetic field at the centre of a circular coil of radius `r` carrying current `l` is `B_(1)`. The field at the ... `1//2` B. `1` C. `2` D. `4`

A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^(2)`. The torque acting on the coil is

Description : A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^(2)`. The torque acting on the coil is

Last Answer : A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^( ... N-m` tending to rotate the side AD into of the page

A circular coil of `20turns` and radius `10cm` carries a current of `5A`. It is placed in a uniform magnetic field of `0*10T`. Find the torque acting

Description : A circular coil of `20turns` and radius `10cm` carries a current of `5A`. It is placed in a uniform magnetic field of `0*10T`. Find the torque acting

Last Answer : A circular coil of `20turns` and radius `10cm` carries a current of `5A`. It is placed in a uniform magnetic ... Nm B. 3.14 Nm C. 0.314 Nm D. zero

Current `i` is carried in a wire of length `L`. If the wire is turned into a circular coil, the maximum magnitude of torque in a given magnetic field

Description : Current `i` is carried in a wire of length `L`. If the wire is turned into a circular coil, the maximum magnitude of torque in a given magnetic field

Last Answer : Current `i` is carried in a wire of length `L`. If the wire is turned into a circular coil, the maximum magnitude ... iB)/(4pi)` D. `(L^(2)B)/(4pi)`

A current of `0.1 A` circulates around a coil of 100 turns and having a radius equal to `5 cm`. The magnetic field set up at the centre of the coil is

Description : A current of `0.1 A` circulates around a coil of 100 turns and having a radius equal to `5 cm`. The magnetic field set up at the centre of the coil is

Last Answer : A current of `0.1 A` circulates around a coil of 100 turns and having a radius equal to `5 cm`. The magnetic ... C. `4pixx10^(-5)T` D. `2pixx10^(-5)T`

Which of the listed electrical devices is represented by the symbol shown in the illustration? EL-0055 A. Fixed resistance resistor B. Coil with magnetic core C. DC motor or generator shunt field D. Transformer

Description : Which of the listed electrical devices is represented by the symbol shown in the illustration? EL-0055 A. Fixed resistance resistor B. Coil with magnetic core C. DC motor or generator shunt field D. Transformer

Last Answer : Answer: D

One method of testing for a reversed shunt field coil in a DC generator or motor is by connecting the field to a direct current source, at reduced field rated voltage, and test for polarity using a/an ____________. A. iron bar across each field B. magnetic compass placed near each field C. test lamp across adjacent fields D. copper jumper across the interpole connections

Description : One method of testing for a reversed shunt field coil in a DC generator or motor is by connecting the field to a direct current source, at reduced field rated voltage, and test for ... placed near each field C. test lamp across adjacent fields D. copper jumper across the interpole connections

Last Answer : Answer: B

: Moving a coil in and out of magnetic field induces A. force B. potential difference C. e.m.f D. voltage

Description : : Moving a coil in and out of magnetic field induces A. force B. potential difference C. e.m.f D. voltage

Last Answer : e.m.f

When field is parallel to plane of area, magnetic flux through coil isA. zeroB. infiniteC. 2D. 5

Description : When field is parallel to plane of area, magnetic flux through coil isA. zero B. infinite C. 2 D. 5

Last Answer : zero

The inductance is the measure of a) Electric charges stored by the material b) Emf generated by energising the coil c) Magnetic field stored by the material d) Magnetization of dipoles

Description : The inductance is the measure of a) Electric charges stored by the material b) Emf generated by energising the coil c) Magnetic field stored by the material d) Magnetization of dipoles

Last Answer : c) Magnetic field stored by the material

What is the mathematical formula for computing the output voltage from a moving coil in a magnetic field?

Description : What is the mathematical formula for computing the output voltage from a moving coil in a magnetic field?

Last Answer : 8. e = Emax sine θ.

The windings of the electromagnetic are usually called: a. Magnetic coils b. Field coil c. Electric coil d. simple coil

Description : The windings of the electromagnetic are usually called: a. Magnetic coils b. Field coil c. Electric coil d. simple coil

Last Answer : c. Electric coil

The induced emf in a coil depends upon: a. Strength of magnetic field b. Resistance of the coil c. area of the coil d. All of them

Description : The induced emf in a coil depends upon: a. Strength of magnetic field b. Resistance of the coil c. area of the coil d. All of them

Last Answer : d. All of them

The induced current can be increased by: a. Using strong magnetic field b. moving loop faster c. Replacing loop by coil d. all of above

Description : The induced current can be increased by: a. Using strong magnetic field b. moving loop faster c. Replacing loop by coil d. all of above

Last Answer : d. all of above

When a uniform magnetic field B is applied to a current carrying coil, the coil will rotate in such a manner that its plane a) becomes parallel to B b) becomes anti-parallel to B c) makes an angle of 600 with B d) becomes perpendicular to B

Description : When a uniform magnetic field B is applied to a current carrying coil, the coil will rotate in such a manner that its plane a) becomes parallel to B b) becomes anti-parallel to B c) makes an angle of 600 with B d) becomes perpendicular to B

Last Answer : d) becomes perpendicular to B

Sensitivity of a galvanometer can be increased by a) Increasing the number of turns of the coil b) Decreasing the magnetic field c) Increasing the ratio c ⁄BAN d) Decreasing the area of the coil

Description : Sensitivity of a galvanometer can be increased by a) Increasing the number of turns of the coil b) Decreasing the magnetic field c) Increasing the ratio c ⁄BAN d) Decreasing the area of the coil

Last Answer : a) Increasing the number of turns of the coil

The magnetic field intensity at the centre of a current carrying coil of diameter J m is K. The current flowing

Description : The magnetic field intensity at the centre of a current carrying coil of diameter J m is K. The current flowing in the coil is

Last Answer : The magnetic field intensity at the centre of a current carrying coil of diameter d m is H. The current flowing in the coil is dH

The magnetic field on the axis of a current carrying polygonal coil will have only a horizontal component

Description : The magnetic field on the axis of a current carrying polygonal coil will have only a horizontal component parallel to the Plane of the coil 

Last Answer : The magnetic field on the axis of a current carrying polygonal coil will have only a horizontal component parallel to the Plane of the coil it is never possible

A coil of wire is placed in a changing magnetic field. If the number of turns in the coil is decreased, the...

Description : A coil of wire is placed in a changing magnetic field. If the number of turns in the coil is decreased, the voltage induced across the coil will: A. increase B. decrease C. remain constant D. be excessive

Last Answer : A coil of wire is placed in a changing magnetic field. If the number of turns in the coil is decreased, the voltage induced across the coil will: decrease

The induced voltage across a coil with 250 turns that is located in a magnetic field and is changing at a ...

Description : The induced voltage across a coil with 250 turns that is located in a magnetic field and is changing at a rate of 8 Wb/s is A. 1,000 V B. 2,000 V C.31.25 V D. 3,125 V

Last Answer : The induced voltage across a coil with 250 turns that is located in a magnetic field and is changing at a rate of 8 Wb/s is 2,000 V 

Strength of magnetic field of solenoid can be increased by adding core made of A. copper B. ferrous C. silver D. aluminum

Description : Strength of magnetic field of solenoid can be increased by adding core made of A. copper B. ferrous C. silver D. aluminum

Last Answer : ferrous

What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : (4) Nichrome Explanation: Nichrome is a non-magnetic alloy of nickel, chromium, and often iron, usually used as a resistance wire. Patented in 1905, it is the oldest documented form of resistance heating ... is corrosion-resistant, and has a high melting point of about 1400 degree C (2552 degree F).

What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : Nichrome

What happens when you coil a magnetic rod?

Description : What happens when you coil a magnetic rod?

Last Answer : Maybe might make a rail gun?

A circular coil of radius `10 cm "and" 100` turns carries a current 1A. What is the magnetic moment of the coil?

Description : A circular coil of radius `10 cm "and" 100` turns carries a current 1A. What is the magnetic moment of the coil?

Last Answer : A circular coil of radius `10 cm "and" 100` turns carries a current 1A. What is the magnetic moment of the coil? A. ... 3,142 A-m^(2)` D. `3 A-m^(2)`

When a certain length of wire is turned into one circular loop, the magnetic induction at the centre of coil due to some current flowing is `B_(1)` If

Description : When a certain length of wire is turned into one circular loop, the magnetic induction at the centre of coil due to some current flowing is `B_(1)` If

Last Answer : When a certain length of wire is turned into one circular loop, the magnetic induction at the centre of coil due to ... 1)` C. `3B_(1)` D. `27B_(1)`

A wire of length 2 m carrying a current of 1 A is bend to form a circle. The magnetic moment of the coil is (in `A-m^(2)`)

Description : A wire of length 2 m carrying a current of 1 A is bend to form a circle. The magnetic moment of the coil is (in `A-m^(2)`)

Last Answer : A wire of length 2 m carrying a current of 1 A is bend to form a circle. The magnetic moment of the coil is (in `A ... . `pi//2` C. `pi//4` D. `1//pi`

A circular current carrying coil has a radius R. The distance from the centre of the coil on the axis where the magnetic induction will be `(1//8)^(th

Description : A circular current carrying coil has a radius R. The distance from the centre of the coil on the axis where the magnetic induction will be `(1//8)^(th

Last Answer : A circular current carrying coil has a radius R. The distance from the centre of the coil on the axis where the ... 2//sqrt(3))R` D. `R//2sqrt(3)`

Magnetic flux in a circular coil of resistance `10Omega` changes with time as shown in figure. `otimes` direction indicates a direction perpendicular

Description : Magnetic flux in a circular coil of resistance `10Omega` changes with time as shown in figure. `otimes` direction indicates a direction perpendicular

Last Answer : Magnetic flux in a circular coil of resistance `10Omega` changes with time as shown in figure ... to paper inwards. Match the following table.

Why do the magnetic forces acting on the coil change as the current running through the coil changes?

Description : Why do the magnetic forces acting on the coil change as the current running through the coil changes?

Last Answer : What is the answer ?

When troubleshooting a motor controller, all indications are that a relay coil should be energized. If there were no magnetic pull, with rated voltage measured across the coil, the most probable cause would be that the _________________. A. coil is open B. control fuse is open C. auxiliary contact in series with the coil is defective D. relay armature is stuck

Description : When troubleshooting a motor controller, all indications are that a relay coil should be energized. If there were no magnetic pull, with rated voltage measured across the coil, the most probable cause ... open C. auxiliary contact in series with the coil is defective D. relay armature is stuck

Last Answer : Answer: A

If a magnetic controller contact fails to pick up when the operating coil is energized, one possible cause may be _______________. A. low spring pressure B. low voltage to the coil C. the residual magnetism of the contact faces D. dirty contact faces

Description : If a magnetic controller contact fails to pick up when the operating coil is energized, one possible cause may be _______________. A. low spring pressure B. low voltage to the coil C. the residual magnetism of the contact faces D. dirty contact faces

Last Answer : Answer: B

If a magnetic controller contactor fails to pick up when the coil voltage is applied to the contactor coil, the cause may be _____________. A. overload B. misalignment of the affected contactor contacts C. low spring pressure D. an open contactor coil

Description : If a magnetic controller contactor fails to pick up when the coil voltage is applied to the contactor coil, the cause may be _____________. A. overload B. misalignment of the affected contactor contacts C. low spring pressure D. an open contactor coil

Last Answer : Answer: D

Magnetic controller contacts may become welded together during operating conditions as a result of _____________. A. high spring pressure B. high ambient temperature C. an open coil D. low voltage on operating coil

Description : Magnetic controller contacts may become welded together during operating conditions as a result of _____________. A. high spring pressure B. high ambient temperature C. an open coil D. low voltage on operating coil

Last Answer : Answer: D

Magnetic controller contacts may become welded together during operation because of _____________. A. excessive magnetic gap B. low contact pressure C. an open coil D. excessive ambient temperature

Description : Magnetic controller contacts may become welded together during operation because of _____________. A. excessive magnetic gap B. low contact pressure C. an open coil D. excessive ambient temperature

Last Answer : Answer: B

When troubleshooting a magnetic controller, it is found that the contacts are welded together. The most probable cause is _____________. A. excessive operation at low load B. high ambient temperature C. low voltage on the operating coil D. high voltage on the operating coil

Description : When troubleshooting a magnetic controller, it is found that the contacts are welded together. The most probable cause is _____________. A. excessive operation at low load B. high ambient temperature C. low voltage on the operating coil D. high voltage on the operating coil

Last Answer : Answer: C

If a magnetic controller relay fails to drop out when the coil voltage is removed from the relay, the probable cause may be _____________. A. excessive spring tension B. overvoltage C. excessive current D. welded contacts

Description : If a magnetic controller relay fails to drop out when the coil voltage is removed from the relay, the probable cause may be _____________. A. excessive spring tension B. overvoltage C. excessive current D. welded contacts

Last Answer : Answer: D

During its operation, loud buzzing and resultant welding of contacts of a magnetic relay may be caused by __________. A. overheating of the contactor coil B. low voltage on the operating coil C. low insulation resistance to ground D. lubrication of the contact bearing points

Description : During its operation, loud buzzing and resultant welding of contacts of a magnetic relay may be caused by __________. A. overheating of the contactor coil B. low voltage on the operating coil C. low insulation resistance to ground D. lubrication of the contact bearing points

Last Answer : Answer: B

The frequency of an alternator at a given RPM is determined by the _____________. A. number of turns of wire in the armature coil B. number of magnetic poles C. strength of the magnets used D. output voltage

Description : The frequency of an alternator at a given RPM is determined by the _____________. A. number of turns of wire in the armature coil B. number of magnetic poles C. strength of the magnets used D. output voltage

Last Answer : Answer: B

Magnetic controller contacts may become welded together during operation due to _____________. A. an open coil B. low contact pressure C. excessive ambient temperature D. excessive magnetic gap

Description : Magnetic controller contacts may become welded together during operation due to _____________. A. an open coil B. low contact pressure C. excessive ambient temperature D. excessive magnetic gap

Last Answer : Answer: B