Are there any building materials left? Then you should learn how to make a swing from a profile pipe ! The components of the swing will be two triangles and a crossbar. Beams connect two triangles. Initially, the pipes are concreted into the ground, and triangles are mounted to them. In this case, it is good to use metal plumbing pipes for an inch and a half for a swing. If the thickness of the pipes is less, then the strength of this structure will decrease many times.
When installing the structure, fixing bolts or a welding machine are used. If you choose the mounting bolt option, you will have to use drills and a drill. This method is very energy consuming and energy consuming. As a result, we conclude that in the presence of a welding machine, this structure should be connected by welding.
The width of these triangles, namely the base, should be from 1.2 meters to 1.5 meters. With the help of a grinder, two pipes are cut off with a certain length to fix the distance of the structure. With the chosen base with a width of 1.2 meters, you need to subsequently cut off 4 more pipes, the length of which will be 2.57 meters. These pipes will be the sides of the triangles for future swings. After the pipes have been cut off, all the ends must be cleaned and processed with a grinder or cleaned with a file for an aesthetic appearance.
Many people who follow a healthy and sporty lifestyle, but do not attend sports clubs and fitness centers, install so-called sports equipment in their apartment. The horizontal bar in this case is the most common and simple construction. Installation of such a structure in a room is very simple. This sports equipment provides full load for the body as training. This article will describe several installation options for this structure.
Also, for your household from pipes, you can make not only a swing, but also an inter-wall horizontal bar. This method of installing a horizontal bar indoors is the most common and convenient. Installation and fabrication is very quick and easy, and the components of this design are very minimal.
Directly, the pipe for the horizontal bar is selected so that it is convenient to grip with your hands. The best option is a pipe with a diameter of 30-35 mm. The length of the pipe is cut along the width of the corridor, and the measurement readings must be made at the height of which it will be mounted. Next, make the nests for the crossbars. Such a horizontal bar should be removable. The bases of the sockets are steel plates 10 * 10 cm, which are bent along the base of the pipe. In order for the crossbar to fit into the sockets, welding is done from the outside. When fastening, holes 10 mm are drilled in the base.