Description : If the radius of the circle above is 30 mm. What is the circumference of the circle (Use 3.14.)?
Last Answer : 188.40 mm
Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)
Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)
Description : A spring of mean radius 40 mm contains 8 action coils of steel (N = 80000 N/mm2 ), 4 mm in diameter. The clearance between the coils being 1 mm when unloaded, the minimum compressive load to remove the clearance, is (A) 25 N (B) 30 N (C) 35 N (D) 40 N
Last Answer : (C) 35 N
Description : The given figure shows a circle with centre O in which a diameter AB bisects the chord PQ at the point R. If PR = RQ = 8 cm and RB = 4 cm, then find the radius of the circle. -Maths 9th
Last Answer : Let r be the radius, then OQ = OB = r and OR = (r - 4) ∴ OQ2 = OR2 + RO2 ⇒ r2 = 64 + (r-4)2 ⇒ r2 = 64 + r2 + 16 - 8r ⇒ 8r = 80 ⇒ r = 10 cm
Description : A rheostat has 100 turns of a wire of radius 0.4 mm having resistivity `4.2xx10^(-7) Omega`m. The diameter of each turn is 3 cm. What is the maximum v
Last Answer : A rheostat has 100 turns of a wire of radius 0.4 mm having resistivity `4.2xx10^(-7) ... the maximum value of resistance that it can introduce ?
Description : Pick out the wrong statement. (A) For a pressure vessel to be classified as 'thin vessel', the ratio of wall thickness to mean radius is less than 0.1 (B) For calculating forces and ... Maximum diameter of the opening provided in a pressure vessel, which does not require any compensation is 200 mm
Last Answer : Option B
Description : Determine the maximum shearing stress and elongation in a helical steel spring composed of 20 turns of 20-mm-diameter wire on a mean radius of 90 mm when the spring is supporting a load of 1.5 kN. and G = 83 GPa. a. 200 mm b. 105.4 mm c. 150 mm d. 250 mm
Last Answer : b. 105.4 mm
Description : What is the moment of inertia acting on a circle of diameter 50 mm? a. 122.71 x 103 mm4 b. 306.79 x 103 mm4 c. 567.23 x 103 mm4 d. 800 x 103 mm4
Last Answer : b. 306.79 x 103 mm4
Description : The moment of inertia of a semi-circle of radius r with respect to a centroidal axis parallel to the diameter is a.0.33 r2 b.0.11 r2 c.0.055 r2 d.0.05 r2 e.0.22 r2
Last Answer : b. 0.11 r2
Description : What is the diameter of a circle if its radius is r ?
Last Answer : If the radius of a circle is r then the diameter is 2r .
Description : What is the diameter of a circle if the radius is 5.9cm?
Last Answer : The diameter of a circle is twice its radius and so 2 times 5.9= 11.8cm
Description : If The exact area of a circle is 81pi square inches what are the radius and diameter of the circle explain?
Last Answer : The radius is 9 inches because area of circle is pi*9 squared =81pi square inches and the diameter is twice the radius which is2*9 = 18 inches
Description : If r is the radius of a circle and d is its diameter is an equivalent formula for the circumference C 2r?
Last Answer : Circumference of a circle: 2*pi*radius or diameter*pi
Description : What is the radius of a circle that is 142 in diameter?
Last Answer : Radius is half the diameter and so 142/2 = 71 units
Description : From a circular plate of diameter 6 cm is cut out a circle whose diameter is a radius of the plate. Find the e.g. of the remainder from the center of circular plate (A) 0.5 cm (B) 1.0 cm (C) 1.5 cm (D) 2.5 cm
Last Answer : (A) 0.5 cm
Description : What is the radius of the circle/ I.Ratio of its area to circumference is >7. II.Diameter of the circle is ≤ 32. If the question can be answered with the help of statement I alone, If ... the statements. If the data in either statement I or statement II alone is sufficient to answer the question.
Last Answer : Let the radius of the circle be r units From statement 1: [πr^2]/ [ 2 πr ] > 7 or r > 14 From statement II: 2r≤32 R ≤ 16 Hence, r can be 15 or 16 units Hence, Answer : d
Description : AD is a diameter of a circle and AB is a chord. If AD = 34 cm, AB = 30 cm, then find the distance of AB from the centre of the circle. -Maths 9th
Last Answer : ∵ The perpendicular drawn from the centre to the chord bisects it. ∴ AM = 1/2 AB = 1/2 × 30 cm = 15 cm Also, OA = 1/2 AD = 1/2 × 34 cm = 17 cm In rt. △OAM, we have OA2 = OM2 + AM2 172 = OM2 + 152 ⇒ 289 = OM2 + 225 ⇒ OM2 = 289 - 225 ⇒ OM2 = 64 ⇒ OM = √64 = 8 cm
Description : In the figure above (not to scale), AB is the diameter of the circle with centre O. If `/_ ACO=30^(@),` then find `/_ BOC`.
Last Answer : In the figure above (not to scale), AB is the diameter of the circle with centre O. If `/_ ACO=30^(@),` then find `/_ BOC`.
Description : The desired sensitivity of a bubble tube with 2 mm divisions is 30". The radius of the bubble tube should be (A) 13.75 m (B) 3.44 m (C) 1375 m (D) None of these
Last Answer : (A) 13.75 m
Description : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.
Last Answer : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.
Description : Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014
Last Answer : (B) 0.30
Description : Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m2.k), when the insulation thickness is __________ mm. (A) 15 (B) 25 (C) 10 (D) 30
Last Answer : (B) 25
Description : Diameter of the rivet to be provided on a 20 mm. thick boiler plate will be __________ mm. (A) 10 (B) 20 (C) 30 (D) 40
Last Answer : (D) 40
Description : An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is (A) 49.9 kg/cm2 (B) 100 kg/cm2 (C) 250 kg/cm2 (D) 175 kg/cm
Last Answer : Answer: Option A
Description : Lapped splices in tensile reinforcement are generally not used for bars of size larger than (A) 18 mm diameter (B) 24 mm diameter (C) 30 mm diameter (D) 36 mm diameter
Last Answer : Answer: Option D
Description : The diameter of the Vicat plunger is 10 mm and its length varies from (A) 20 mm to 30 mm (B) 30 mm to 40 mm (C) 40 mm to 50 mm (D) 50 mm to 60 mm
Last Answer : Answer: Option C
Description : For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than (A) 15 mm (B) 25 mm (C) 30 mm (D) 40 mm
Description : In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time
Last Answer : Answer: Option B
Description : Minimum cover to longitudinal steel in a column should be (if the diameter of bar, Ø> 12mm) [ A ] 25 mm [ B ] 30 mm [ C ] 40 mm [ D ] 50 mm
Last Answer : [ C ] 40 mm
Description : A helical spring is fabricated by wrapping wire 19.05 mm in diameter around a forming cylinder 203.2 mm in diameter. Compute the number of turns required to permit an elongation of 101.6 mm. without exceeding a shearing ... G = 82737 N/mm2. a. 10 turns b. 20 turns c. 25 turns d. 30 turns
Last Answer : a. 10 turns
Description : A hollow shaft of 1 m length is designed to transmit a power of 30 kW at 700 rpm. The maximum permissible angle of twist in the shaft is 1o. The inner diameter of the shaft is 0.7 times the outer diameter. The modulus of ... shaft is _______. (a) 43 to 45 (b) 50to 60 (c) 70 to 80 (d) 85 to 100
Last Answer : (a) 43 to 45
Description : What is the shear stress acting on the outer surface of a hollow shaft subjected to a torque of 100 Nm?(The inner and outer diameter of the shaft is 15 mm and 30 mm respectively.) a. 50.26 N/mm2 b. 40.24 N/mm2 c. 20.120 N/mm2 d. 8.74 N/mm2
Last Answer : c. 20.120 N/mm2
Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch
Last Answer : b. 50.6 kg-inch
Description : AD is a diameter of a circle and AB is a chord. If AD = 34 cm, AB = 30 cm, the distance of AB from the centre of the circle is -Maths 9th
Last Answer : (d) Given, AD = 34 cm and AB = 30 cm In figure, draw OL ⊥ AB. Since, the perpendicular from the centre of a circle to a chord bisects the chord.
Description : If AB = 12 cm, BC = 16 cm and AB is perpendicular to BC, then the radius of the circle passing through the points A, B and C is -Maths 9th
Last Answer : According to question the radius of the circle passing through the points A, B and C .
Description : If the sides of a triangle are 3 cm, 4 cm and 5 cm, then what is the radius of the circum-circle? -Maths 9th
Last Answer : Semi-perimeter of triangle (s) = \(rac{3+4+5}{2}\)cm = 6 cm∴ Area of triangle A = \(\sqrt{s(s-a)(s-b)(s-c)}\) = \(\sqrt{6 imes3 imes2 imes1}\) cm2 = 6 cm2∴ Radius of circum-circle = \(rac{abc}{4( ext{Area of}\,\Delta)}\) = \(rac{3+4+5}{4 imes60}\) cm = 2.5 cm
Description : The radius of circle tends to zero then it approaches a ________.
Last Answer : The radius of circle tends to zero then it approaches a ________.
Description : If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the circle solve the following :
Last Answer : If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the ... D. `x^(2)+y^(2)+6x+1=0`
Last Answer : If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the ... 0` D. `x^(2)+y^(2)-8y=0`
Description : The radius of a circle is 10cm. The length of a chord is 12 cm. Then the distance of the chord from the centre is `"__________________"`.
Last Answer : The radius of a circle is 10cm. The length of a chord is 12 cm. Then the distance of the chord from the centre is `"__________________"`.
Description : In a circle of radius 14 cm, an arc subtends an angle of 45 O at the centre, then the area of the sector is (a) 71 cm 2(b) 76 cm 2 (c) 77 cm 2 (d) 154 cm 2
Last Answer : (c) 77 cm 2
Description : If S, L and R are the arc length, long chord and radius of the sliding circle then the perpendicular distance of the line of the resultant cohesive force, is given by (A) a = S.R/L (B) a = L.S/R (C) a = L.R/S (D) None of these
Last Answer : (A) a = S.R/L
Description : A wire can be bent to form a circle of radius 56 cm. if it is instead bent in the form of a square, then its area will be: a) 6400 sq.cm b) 2025 sq.cm c) 7744 sq.cm d) 6561 sq.cm e) none of these
Last Answer : Length of the wire = circumference of the circle 2 × (22/7) × 56 = 2 × 22 × 8 = 352 cm side of square = 352/4 = 88cm area of square = 88 × 88 = 7744 sq.cm Answer: c)
Description : Below are the few steps given for scan-converting a circle using Bresenham's Algorithm. Which of the given steps is not correct? (1) Compute d = 3 – 2r (where r is radius) (2) Stop if x> y (3) If d
Last Answer : If d≥0,then d=4 *(x-y)+10, x=x+1 and y=y+1
Description : If two chords of a circle with a common end-point are inclined equally to the diameter through this common end-point, then prove that chords are equal. -Maths 9th
Last Answer : Let AB and AC be two chords and AD be the diameter of the circle . Draw OL ⊥ AB and OM ⊥ AC . In ΔOLA and ΔOMA ∠ OLA = ∠ OMA = 90° OA = OA [common sides] ∠ OAL = ∠ OAM [given] . OLA ≅ OMA [by ASA congruency] OL =OM (by CPCT) Chords AM and AC are equidistant from O. ∴ AB = AC Hence proved.