What is the Chemical processes that causes that causes the production of ignitable vapors from solid wood?

What is the Chemical processes that causes that causes the production of ignitable vapors from solid wood?
by

1 Answer

Answer :

Pyrolysis
by
selected by

Related questions

Which of the following processes is not an example of adsorption applied to gaseous separations? (A) Recovery of valuable solvent vapors from dilute mixture with air and other gases (B) Dehumidification of air and gas (C) Removal of objectionable odour and impurities from industrial gases (D) Decolouration of yellow glycerine

Description : Which of the following processes is not an example of adsorption applied to gaseous separations? (A) Recovery of valuable solvent vapors from dilute mixture with air and ... Removal of objectionable odour and impurities from industrial gases (D) Decolouration of yellow glycerine

Last Answer : (D) Decolouration of yellow glycerine

The lowest temperature, at which a solid fuel produces enough vapors to support continuous combustion, is called (A) Fire point (B) Smoke point (C) Burning temperature (D) Kindling temperature

Description : The lowest temperature, at which a solid fuel produces enough vapors to support continuous combustion, is called (A) Fire point (B) Smoke point (C) Burning temperature (D) Kindling temperature

Last Answer : (C) Burning temperature

Diesel as compared to petrol is a. more difficult to ignite b. less difficult to ignite c. highly ignitable d. just about the same difficult to ignite

Description : Diesel as compared to petrol is a. more difficult to ignite b. less difficult to ignite c. highly ignitable d. just about the same difficult to ignite

Last Answer : ANSWER a. more difficult to ignite

Have you ever suffered from vapors?

Description : Have you ever suffered from vapors?

Last Answer : Vapors are feeling faint I believe. Some people with low blood sugar get them I believe.

What is a hole in the ground that has vapors or gases coming out?

Description : What is a hole in the ground that has vapors or gases coming out?

Last Answer : ikmpy5ywrtytd

Heat stored in water vapors is –

Description : Heat stored in water vapors is –

Last Answer : Latent Heat

Inside the distillation columns, the (A) Highest temperatures is near the feed plate (B) Driving force for the liquid flow is its weight (C) Vapors are not always at their dew points (D) All (A), (B) and (C)

Description : Inside the distillation columns, the (A) Highest temperatures is near the feed plate (B) Driving force for the liquid flow is its weight (C) Vapors are not always at their dew points (D) All (A), (B) and (C)

Last Answer : (B) Driving force for the liquid flow is its weigh

In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Description : In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for ... bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Last Answer : (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column

A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are being withdrawn and feed to the column is stopped). At the new steady state, (A) Composition of vapors and that of liquid do not vary throughout the column (B) Reboiler load and condenser load are minimum (C) The top and bottom compositions are unchanged with and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Description : A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are ... and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Last Answer : (D) The top and bottom compositions correspond to the maximum enrichment available

Which measurable property become constant in Water Water vapors equilibrium at constant temperature

Description : Which measurable property become constant in Water Water vapors equilibrium at constant temperature

Last Answer : Ans. Vapour pressure.

For condensation of pure vapors, if the heat transfer co-efficients in filmwise and drop-wise condensation are respectively hf and hd , then (A) hf = hd (B) hf > hd (C) hf < hd (D) hf could be greater or smaller than hd

Description :  For condensation of pure vapors, if the heat transfer co-efficients in filmwise and drop-wise condensation are respectively hf and hd , then (A) hf = hd (B) hf > hd (C) hf < hd (D) hf could be greater or smaller than hd

Last Answer : (C) hf < hd

The film co-efficient is decreased due to the presence of non-condensing gases in the vapors. The film co-efficient of superheated vapor as compared to that of saturated vapor is (A) More (B) Less (C) Some (D) Either more or less; depends on the nature of vapor

Description : The film co-efficient is decreased due to the presence of non-condensing gases in the vapors. The film co-efficient of superheated vapor as compared to that of saturated vapor is (A) More (B) Less (C) Some (D) Either more or less; depends on the nature of vapor

Last Answer : (C) Some

______________ is the temperature at which liquids start to boil or the temperature at which vapors begin to condense.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Description : ______________ is the temperature at which liquids start to boil or the temperature at which vapors begin to condense.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Last Answer : Saturation Temperature

The chemical processes in the production of steel from haematite ore involve

Description : The chemical processes in the production of steel from haematite ore involve

Last Answer : The chemical processes in the production of steel from haematite ore involve A. Reduction B. ... by oxidation D. Oxidation followed by reduction

The most economical pulp for the production of newsprint would be the __________ pulp. (A) Ground-wood (B) Sulphate (C) Sulphite (D) Semi-chemical

Description : The most economical pulp for the production of newsprint would be the __________ pulp. (A) Ground-wood (B) Sulphate (C) Sulphite (D) Semi-chemical

Last Answer : (A) Ground-wood

Which of the following psychrometric processes is followed by water vapour laden unsaturated air, when it is passed through solid or liquid adsorbent? (A) Cooling and dehumidification (B) Heating and dehumidification at almost constant wet bulb temperature (C) Dehumidification with dry bulb temperature remaining constant (D) None of these

Description : Which of the following psychrometric processes is followed by water vapour laden unsaturated air, when it is passed through solid or liquid adsorbent? (A) Cooling and dehumidification ... (C) Dehumidification with dry bulb temperature remaining constant (D) None of these

Last Answer : (B) Heating and dehumidification at almost constant wet bulb temperature

A trickle bed reactor is the one, which (A) Has altogether three streams either entering or leaving (B) Processes three reactants at different flow rates (C) Processes three reactants with same flow rate (D) Employs all the three phases (i.e. solid, liquid and gas)

Description : A trickle bed reactor is the one, which (A) Has altogether three streams either entering or leaving (B) Processes three reactants at different flow rates (C) Processes three reactants with same flow rate (D) Employs all the three phases (i.e. solid, liquid and gas)

Last Answer : (D) Employs all the three phases (i.e. solid, liquid and gas)

Clausius-Clapeyron equation is applicable to __________ equilibrium processes. (A) Solid-vapor (B) Solid-liquid (C) Liquid-vapor (D) All (A), (B) and (C)

Description : Clausius-Clapeyron equation is applicable to __________ equilibrium processes. (A) Solid-vapor (B) Solid-liquid (C) Liquid-vapor (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A stable interface between solid _________ liquid ____________ and gaseous ___________ promotes high rate of electrode processes. a) Fuel, electrolyte, electrode b) Electrode, fuel, electrolyte c) Electrode, electrolyte, fuel d) Fuel, electrode, electrolyte

Description : A stable interface between solid _________ liquid ____________ and gaseous ___________ promotes high rate of electrode processes. a) Fuel, electrolyte, electrode b) Electrode, fuel, electrolyte c) Electrode, electrolyte, fuel d) Fuel, electrode, electrolyte

Last Answer : c) Electrode, electrolyte, fuel

Would you buy a dining table made using innovative light weight construction methods if it had the same look, quality and feel as a solid wood table and cost less?

Description : Would you buy a dining table made using innovative light weight construction methods if it had the same look, quality and feel as a solid wood table and cost less?

Last Answer : If it has the same look, feel and quality then what’s the difference? Weight? I guess having the same quality would also indicate that it is as sturdy too. No brainer…buy the cheaper one.

Solid core vinyl does it look like real wood siding?

Description : Solid core vinyl does it look like real wood siding?

Last Answer : answer:eh, not really. it's just so clean good alternative to the upkeep of wood though. it's just that it is a little characterless here where I am. You'll see an authentic craftsman and then directly ... because it is a little sterile. Maybe it's just that it doesn't age, and that seems strange.

The difference between normal wood and solid wood?

Description : Why is the massif more expensive?

Last Answer : "Normal wood" is solid ... Different materials are cheaper - veneered (a thin layer of wood glued to the surface of the board) or "plasticized" with wood decor (foil) - OSB, DTD, chipboard, plastic - with wood they do not have much common, even if it is váshaped ’.

Is a physical change A.Forming a mixture B.Burning wood C.Food turning into waste in the intestines D.Turning solid sodium and chlorine gas into salt?

Description : Is a physical change A.Forming a mixture B.Burning wood C.Food turning into waste in the intestines D.Turning solid sodium and chlorine gas into salt?

Last Answer : What is the answer ?

Where can you buy solid wood computer desks?

Description : Where can you buy solid wood computer desks?

Last Answer : This site (http://www.computerdesks.com/woodcomputerdesks.cfm) has several solid wood computer desks. For example, this desk (http://www.computerdesks.com/computer-desks/rectangular-desks/gothamdeskwithoptionalchair.cfm) is both solid wood and has a keyboard tray!

Where can I find the best online deals for a solid wood bookcase?

Description : Where can I find the best online deals for a solid wood bookcase?

Last Answer : You can find online deals for solid wood bookcases on http://www.bizrate.com/bookcases/solid-wood-bookcases/

In winter an iron pipe feel colder than a wooden window . This is because wood is----? A. Conductor B. Non-Conductor (Answer) C. Semi- Conductor D. Not a solid while iron is a solid E. None of these

Description : In winter an iron pipe feel colder than a wooden window . This is because wood is----? A. Conductor B. Non-Conductor (Answer) C. Semi- Conductor D. Not a solid while iron is a solid E. None of these

Last Answer : B. Non-Conductor (Answer)

Interior doors. Veneer, solid wood or CPL, which to choose?

Description : Interior doors. Veneer, solid wood or CPL, which to choose?

Last Answer : Interior doors. Veneer, solid wood or CPL, which to choose? Choosing an interior door can be a real challenge. You should pay attention not only to the size, price, color, style, but ... often stops buyers when choosing laminated doors, which, in fact, are the most practical and rational option.

Look at the following flow chart that shows the processes of production.Fill in the products derived through the various processes of production in the boxes given below. -SST 10th

Description : Look at the following flow chart that shows the processes of production.Fill in the products derived through the various processes of production in the boxes given below. -SST 10th

Last Answer : (i) 1. Raw fibre 2. Yarn 3. Fabric 4. Garments (ii) ... per kg while if it is sold as a trouser it may fetch ` 800 per kg. Value is added at every stage from fibre to yarn to fabric and to garments.

What Processes depend on fusion Check all that apply. A.energy production in the sun B.energy production in nuclear reactors C.the hydrogen bomb D.energy production from fuel cells?

Description : What Processes depend on fusion Check all that apply. A.energy production in the sun B.energy production in nuclear reactors C.the hydrogen bomb D.energy production from fuel cells?

Last Answer : It's A and C. The sun and most other stars are fusion reaction engines, and hydrogen bomb (perhaps more properly a fusion nuclear weapon) apply nuclear fusion to do what they do.

What Processes depend on fusion Check all that apply. A.energy production in the sun B.energy production in nuclear reactors C.the hydrogen bomb D.energy production from fuel cells?

Description : What Processes depend on fusion Check all that apply. A.energy production in the sun B.energy production in nuclear reactors C.the hydrogen bomb D.energy production from fuel cells?

Last Answer : Need answer

Hemostasis and the cessation of bleeding require which of the following processes? A. Adherence of platelets to exposed subendothelial glycoproteins and collagen with subsequent aggregation of platelets and formation of a hemostatic plug. B. Interaction of tissue factor with factor VII circulating in the plasma. C. The production of thrombin via the coagulation cascade with conversion of fibrinogen to fibrin. D. Cross-linking of fibrin by factor XIII.

Description : Hemostasis and the cessation of bleeding require which of the following processes? A. Adherence of platelets to exposed subendothelial glycoproteins and collagen with subsequent aggregation of platelets and ... conversion of fibrinogen to fibrin. D. Cross-linking of fibrin by factor XIII.

Last Answer : Answer: ABCD DISCUSSION: Hemostasis requires the interaction of platelets with the exposed subendothelial structures at the site of injury followed by aggregation of more platelets in that area. ... form a stable clot that incorporates the platelet plug and fibrin thrombus into a stable clot

Which of the following processes is used for the production of Biodiesel? (1) Transamination (2) Transcription (3) Transesterification (4) Translation

Description : Which of the following processes is used for the production of Biodiesel? (1) Transamination (2) Transcription (3) Transesterification (4) Translation

Last Answer : (3) Transesterification Explanation: Biodiesel production is the process of producing the biofuel, biodiesel, through the chemical reactions transesterification and esterification. This involves vegetable or ... and oils being reacted with short-chain alcohols (typically methanol or ethanol).

______ is the cell organelle, in which the biochemical processes of respiration and energy production occur. (1) Mitochondria (2) Chloroplast (3) Ribosomes (4) Nucleus

Description : ______ is the cell organelle, in which the biochemical processes of respiration and energy production occur. (1) Mitochondria (2) Chloroplast (3) Ribosomes (4) Nucleus

Last Answer : (1) Mitochondria Explanation: Mitochondria is an organelle found in large numbers in most cells, in which the biochemical processes of respiration and energy production occur.

Which of the following processes is used for the production of petroleum coke? (A) Stabilisation (B) Visbreaking (C) Cracking (D) Reforming

Description : Which of the following processes is used for the production of petroleum coke? (A) Stabilisation (B) Visbreaking (C) Cracking (D) Reforming

Last Answer : (C) Cracking

The energy used by any business varies with ______ processes. a) Input b) Volumes c) Production. d) All of the above

Description : The energy used by any business varies with ______ processes. a) Input b) Volumes c) Production. d) All of the above

Last Answer : All of the above

The right to ________ is the right to be protected against products, production processes and service hazardous to life A. Redress B. Choose C. Be informed D. Safety

Description : The right to ________ is the right to be protected against products, production processes and service hazardous to life A. Redress B. Choose C. Be informed D. Safety

Last Answer : D. Safety

Mitochondria are referred to as the ‘powerhouses’ of a cell. This is because they convert food to energy, or ATP, more efficiently than processes which rely on anaerobic, or non-oxygen using, energy production alone. Name the energy production process carried out by mitochondria.

Description : Mitochondria are referred to as the ‘powerhouses’ of a cell. This is because they convert food to energy, or ATP, more efficiently than processes which rely on anaerobic, or non-oxygen using, energy production alone. Name the energy production process carried out by mitochondria.

Last Answer : Oxidative phosphorylation.

Which of the following processes is used for the production of Biodiesel ? (1) Transamination (2) Transcription (3) Transesterification (4) Translation

Description : Which of the following processes is used for the production of Biodiesel ? (1) Transamination (2) Transcription (3) Transesterification (4) Translation 

Last Answer : Transesterification

The resources which can be renewed or reproduced by physical, chemical or mechanical processes. -SST 10th

Description : The resources which can be renewed or reproduced by physical, chemical or mechanical processes. -SST 10th

Last Answer : (i) Stock (ii) Renewable

In which processes light energy is converted into chemical energy? -Do You Know?

Description : In which processes light energy is converted into chemical energy? -Do You Know?

Last Answer : Photosynthesis Photosynthesis is the cycle where light energy is changed over to compound energy as sugars. In a cycle driven by light energy, glucose atoms (or different sugars) are developed from water and carbon dioxide, and oxygen is delivered as the result.

a what is a chemical signal that can control one or more body processes?

Description : a what is a chemical signal that can control one or more body processes?

Last Answer : covalent bond

What is the term for the energy responsible for the variations in the reaction rates of chemical processes?

Description : What is the term for the energy responsible for the variations in the reaction rates of chemical processes?

Last Answer : It's hard to know precisely what is meant by this question. You may be thinking of activation energy, the minimum energy needed to start the reaction, which explains why one reaction may go ... reaction going faster and slower depending on the energy supply, then that's most often thermal energy.

Which of the processes is not an example of chemical weathering?

Description : Which of the processes is not an example of chemical weathering?

Last Answer : A. dissolution of calcite B. breaking down of feldspar to form clay C. splitting of a rock along a fracture D. rusting of a nail E. All are examples of chemical weathering *I have read the book and researched I need help finding this please. I wouldn't be asking if I didn't knew... no rude answers*

(i)State why heat changes in physical and chemical processes are indicated by enthalpy changes and not by entropy changes? (ii)What are the limitations of First Law of thermodynamics?

Description : (i)State why heat changes in physical and chemical processes are indicated by enthalpy changes and not by entropy changes? (ii)What are the limitations of First Law of thermodynamics?

Last Answer : (i) Most of the processes are carried out in an open system i.e, at constant pressure. (ii)(a) Can’t explain the feasibility of the reaction. (b)It poses no restriction on the direction of flow of heat. (c)Practically it is not possible to convert the heat energy into an equivalent amount of work.

Phytohormones are (a) chemical regulating flowering (b) chemical regulating secondary growth (c) hormones regulating growth from seed to adulthood (d) regulators synthesised by plants and influencing physiological processes.

Description : Phytohormones are (a) chemical regulating flowering (b) chemical regulating secondary growth (c) hormones regulating growth from seed to adulthood (d) regulators synthesised by plants and influencing physiological processes.

Last Answer : (d) regulators synthesised by plants and influencing physiological processes.

Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process. (A) Mechanical (B) Sulphate/Kraft (C) Sulphite (D) Neutral sulphite semi-chemical

Description : Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process. (A) Mechanical (B) Sulphate/Kraft (C) Sulphite (D) Neutral sulphite semi-chemical

Last Answer : (D) Neutral sulphite semi-chemical

Low purity oxygen is used for(A) L.D. steel making(B) Cutting and welding of metals(C) Medicinal purposes(D) Chemical oxidation processes

Description : Low purity oxygen is used for (A) L.D. steel making (B) Cutting and welding of metals (C) Medicinal purposes (D) Chemical oxidation processes

Last Answer : (D) Chemical oxidation processes

Platinum is a versatile catalyst for many processes in chemical industries. It is highly prone to be poisoned by the presence of (A) Carbon (B) Arsenic (C) Lead (D) Sulphur

Description : Platinum is a versatile catalyst for many processes in chemical industries. It is highly prone to be poisoned by the presence of (A) Carbon (B) Arsenic (C) Lead (D) Sulphur

Last Answer : (B) Arsenic

"If different processes are used to bring about the same chemical reaction, the enthalpy change is same for all of them". This is __________ law. (A) Hess's (B) Kirchoff's (C) Lavoisier and Laplace (D) None of these

Description : "If different processes are used to bring about the same chemical reaction, the enthalpy change is same for all of them". This is __________ law. (A) Hess's (B) Kirchoff's (C) Lavoisier and Laplace (D) None of these

Last Answer : (A) Hess's

Chemical engineering thermodynamics is concerned with the __________ in/of chemical processes. (A) Reaction mechanism (B) Calculation of rates (C) Energy transformation from one form to another (D) None of these

Description : Chemical engineering thermodynamics is concerned with the __________ in/of chemical processes. (A) Reaction mechanism (B) Calculation of rates (C) Energy transformation from one form to another (D) None of these

Last Answer : (C) Energy transformation from one form to another