When placed in direct sunlight which object will absorb the most visible light?

When placed in direct sunlight which object will absorb the most visible light?
by

1 Answer

Answer :

Darker objects will absorb more light - especially blackobjects.Of course, the amount of sunlight absorbed also depends onthe exposed surface area.
by
selected by

Related questions

White clothes are cooler than black ones because they – (1) absorb all the light that reaches them (2) reflect all the light that reaches them (3) will not allow the light to penetrate (4) cool the sunlight completely

Description : White clothes are cooler than black ones because they – (1) absorb all the light that reaches them (2) reflect all the light that reaches them (3) will not allow the light to penetrate (4) cool the sunlight completely

Last Answer : (2) reflect all the light that reaches them Explanation: The coolness and warmth associated with clothes is because of their reflective or absorptive capacities. White clothes are good reflectors of light, thereby keeping the body cool. The opposite is the case with black clothes.

White clothes are cooler than black ones because they (1) absorb all the light that reaches them (2) reflect all the light that reaches them (3) will not allow the light to penetrate (4) cool the sunlight completely

Description : White clothes are cooler than black ones because they (1) absorb all the light that reaches them (2) reflect all the light that reaches them (3) will not allow the light to penetrate (4) cool the sunlight completely

Last Answer : reflect all the light that reaches them

Transition ions absorb light in – (1) infrared region (2) ultraviolet region (3) microwave region (4) visible region

Description : Transition ions absorb light in – (1) infrared region (2) ultraviolet region (3) microwave region (4) visible region

Last Answer : (4) visible region Explanation: Transition metal ions have an incomplete set of 3d electrons. Changes in the energy of these electrons correspond to the energy of visible light. The absorption of visible light by these ions lend colour to gems.

Pick out the wrong statement. (A) Benzopyrene which causes cancer is present in traces in tobacco, charcoal & petrol driven automobile exhaust (B) NO2 is capable of penetrating the troposphere and can absorb both ultraviolet & visible light (C) Hydrocarbon pollutants are produced by sweet gum, oak & natural rubber trees (D) H2S is not at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Description : Pick out the wrong statement. (A) Benzopyrene which causes cancer is present in traces in tobacco, charcoal & petrol driven automobile exhaust (B) NO2 is capable of penetrating the troposphere and ... at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

Last Answer : (D) H2S is not at all produced during combustion of sulphur bearing fuels as all the sulphur is oxidised to SO2

When considering visible light cured composites, which of the following statements is incorrect? A. An air-inhibited layer is present superficially on the composite. B. The wavelength of the light which affects the initiator is in the range of 450 to 500 nanometers. C. All other things equal. The light generally penetrates deeper into a small-particle composite than it does into a microfilled composite. (smaller particles absorb more light) D. B and C E. All are true

Description : When considering visible light cured composites, which of the following statements is incorrect? A. An air-inhibited layer is present superficially on the composite. B. The wavelength of the light which affects ... composite. (smaller particles absorb more light) D. B and C E. All are true

Last Answer : E. All are true

Transition ions absorb light in : (1) infrared region (2) ultraviolet region (3) microwave region (4) visible region

Description : Transition ions absorb light in : (1) infrared region (2) ultraviolet region (3) microwave region (4) visible region

Last Answer : visible region

What cell structures are seen only in cells that absorb sunlight and carry out photosynthesis?

Description : What cell structures are seen only in cells that absorb sunlight and carry out photosynthesis?

Last Answer : What is the answer ?

The nurse advises the patient undergoing photodynamic therapy (PDT) for macular degeneration to avoid exposure to direct sunlight or bright lights for a) the first five days after the procedure. Photodynamic therapy includes the use of verteporfin, a light-activated dye. The dye within the blood vessels near the surface of the skin could become activated with exposure to strong light, such as sunlight or bright lights. Ordinary indoor light is not a problem. The patient should be counseled to wear protective clothing, such as long-sleeved shirts, sunglasses, and wide-brimmed hats, if the patient has to go outdoors during daylight hours in the first five days post-treatment. Inadvertent sunlight exposure can lead to severe blistering of the skin and sunburn.

Description : The nurse advises the patient undergoing photodynamic therapy (PDT) for macular degeneration to avoid exposure to direct sunlight or bright lights for a) the first five days after the procedure. ... should avoid exposure to direct sunlight or bright lights for the first five days post-treatment.

Last Answer : a) the first five days after the procedure. Photodynamic therapy includes the use of verteporfin, a light-activated dye. The dye within the blood vessels near the surface of the skin could ... days post-treatment. Inadvertent sunlight exposure can lead to severe blistering of the skin and sunburn.

What refers to the heating of the earth’s atmosphere not caused by direct sunlight but by infrared light radiated by the surface and absorbed mainly by atmospheric carbon dioxide?  A. Greenhouse effect  B. Global warming  C. Thermal rise effect  D. Ozone effect

Description : What refers to the heating of the earth’s atmosphere not caused by direct sunlight but by infrared light radiated by the surface and absorbed mainly by atmospheric carbon dioxide?  A. Greenhouse effect  B. Global warming  C. Thermal rise effect  D. Ozone effect

Last Answer : Greenhouse effect

When hotspots are taken and placed upon a global map, does it make you better able to absorb a great deal of information?

Description : When hotspots are taken and placed upon a global map, does it make you better able to absorb a great deal of information?

Last Answer : *** Within the articles, the maps and photographs show closer mapping information of each area. To access a more- discernible image, please press the camera image in each corner to access the information.

When the wavelength of a spectral line emitted from an object decreases which end of the visible light spectrum does it move toward and what is the object and motion relative to Earth?

Description : When the wavelength of a spectral line emitted from an object decreases which end of the visible light spectrum does it move toward and what is the object and motion relative to Earth?

Last Answer : Need answer

Every hot object emits – (1) X-rays (2) Visible light (3) Infrared rays (4) Ultraviolet rays

Description : Every hot object emits – (1) X-rays (2) Visible light (3) Infrared rays (4) Ultraviolet rays

Last Answer : (3) Infrared rays

Every hot object emits _____ (1) X–rays (2) Visible light (3) Infrared rays (4) Ultraviolet rays

Description : Every hot object emits _____ (1) X–rays (2) Visible light (3) Infrared rays (4) Ultraviolet rays 

Last Answer : Infrared rays

Answer the following S. No Statement Chose the correct answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the blanks 3 Non Contact Infrared Thermometer cannot measure temperature of objects placed in hazardous places True/False 4 To measure the RPM of a Flywheel, ______ type of RPM meter is used and for a visible shaft-end _______ type of RPM meter is used. Fill in the blanks 5 In a switch yard, _____ instrument is used to identify the loose joints and terminations Fill in the blanks 6 Every Designated Consumer shall have its first energy audit conducted by ________ Energy Auditor within ______ months of

Description :  Answer the following S. No Statement Chose the correct  answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the ... of RPM  meter is used and for a visible shaft-end _______ type of  RPM meter is used.

Last Answer : Sr  No Statement Chose the correct  answer OR Fill-in-the-blanks Solution 1 Fyrite measures CO2, O2 and  SO2 True/False False 2 Ultrasonic Flow Meter uses the  principle of____& ____ ... ]  10 In a gasification system the  reduction zone is above the  combustion zone True/False False

What are the sleeping patterns like for animals with no access to direct sunlight?

Description : What are the sleeping patterns like for animals with no access to direct sunlight?

Last Answer : answer:From what I've found, what isn't much and I maybe wrong on this so let me keep checking but some animals that live in caves or sea life at the bottom of the ocean don't sleep. What I also want ... night as they don't seem to sleep as we know it but I'm guessing it's more complex than that.

how many hrs of direct sunlight do hummingbird trees need

Description : how many hrs of direct sunlight do hummingbird trees need

Last Answer : Need Answer

What grows well in direct outdoor sunlight

Description : What grows well in direct outdoor sunlight

Last Answer : Need Answer

Should I plant radishes in direct sunlight?

Description : This year I will plant radishes for the first time. Do you think I should put them in direct sunlight? Or rather in the shade? I have either a flower bed under a tree in the shade or directly in the sun.

Last Answer : In the sun. Not under a tree.

Is it safe to keep gas cylinder in direct sunlight?

Description : Is it safe to keep gas cylinder in direct sunlight?

Last Answer : Yes. Keeping a gas cylinder under the sunlight is just okay. It will not make it explode. It will only increase its pressure. The heat absorbed by the cylinder is not enough to ignite the liquid ... is very high for too long and even blast when it is continuously exposed to intensed heat like fire.

Does the direct sunlight harms DSLR lens?

Description : Does the direct sunlight harms DSLR lens?

Last Answer : Yes, it can damage your camera on the long run because the lens will act as a magnifier glass, directing the Sun rays straight to the inside parts of your camera. Of course a shot here and there ... rays can get damaged. It can overheat and also spoil the plástic used in the built of your equipment.

$ Halophytes are those plants which grow in salty soils. Heliophytes are those plants which grown in direct sunlight

Description : $ Halophytes are those plants which grow in salty soils. Heliophytes are those plants which grown in direct sunlight

Last Answer : $ Halophytes are those plants which grow in salty soils. Heliophytes are those plants which grown in direct ... wrong D. If both As and R are wrong.

What is the best material for curtains that are continuously in direct sunlight, in order to avoid fading?

Description : What is the best material for curtains that are continuously in direct sunlight, in order to avoid fading?

Last Answer : Any heavy material, such as those used in blackout curtains will be great for resisting fade.

How long do bamboo shades last in direct sunlight?

Description : How long do bamboo shades last in direct sunlight?

Last Answer : Genuine bamboo shades can last a long time even in direct sunlight. The bamboo its self can have a life span of 120 years!

Is a shadow on the ground, cast by sunlight, the same width as the object that cast it?

Description : Is a shadow on the ground, cast by sunlight, the same width as the object that cast it?

Last Answer : answer:Yes. The rays of light are all parallel to each other because they all come from the sun, which is very, very far away. There will always be some fuzziness at the shadow's edges ... accurate IF you measure the wall's shadow along a line parallel to the wall-otherwise you need trigonometry.

For locating a distant object visible from two transit stations, the method usually preferred to, is (A) Angles and distances from transit stations (B) Angles from two transit stations (C) Distance from two transit stations (D) Angle from one transit station and distance from the other

Description : For locating a distant object visible from two transit stations, the method usually preferred to, is  (A) Angles and distances from transit stations  (B) Angles from two transit stations  ... from two transit stations  (D) Angle from one transit station and distance from the other 

Last Answer : (B) Angles from two transit stations 

An object on the top of a hill 100 m high is just visible above the horizon from a station at sea level. The distance between the station and the object is : (a) 38.53 km (b) 3.853 km (c) 3853 km (d) 385.3 km

Description : An object on the top of a hill 100 m high is just visible above the horizon from a station at sea level. The distance between the station and the object is : (a) 38.53 km (b) 3.853 km (c) 3853 km (d) 385.3 km

Last Answer : (a) 38.53 km

Which of the following is true about the static member variable in C++. i) It is initialized to zero when the first object of its class is created. Other initialization is also permitted. ii) It is visible only within the class, but its lifetime is the entire program. A) i-True, ii-True B) ii-False, ii-True C) i-True, ii-False D) i-False, iii-False

Description : Which of the following is true about the static member variable in C++. i) It is initialized to zero when the first object of its class is created. Other initialization is also permitted. ii) It is visible only within ... , ii-True B) ii-False, ii-True C) i-True, ii-False D) i-False, iii-False

Last Answer : B) ii-False, ii-True

What powerful force allows black holes to absorb light? -Space

Description : What powerful force allows black holes to absorb light? -Space

Last Answer : Actually, the torrent of ultraviolet radiation is being emitted by gas that is heated as it is pulled into the black hole's powerful gravity. Black holes, by definition, are regions from which light cannot escape. Thus, any radiation observed from outside must come from outside black holes.

Monochromatic radiation of wavelength `lambda` is incident on a hydrogen sample in ground state. hydrogen atoms absorb a fraction of light and subsequ

Description : Monochromatic radiation of wavelength `lambda` is incident on a hydrogen sample in ground state. hydrogen atoms absorb a fraction of light and subsequ

Last Answer : Monochromatic radiation of wavelength `lambda` is incident on a hydrogen sample in ground state. ... different wavelength .Find the value of `lambda`

What Substances that absorb light convert it to .?

Description : What Substances that absorb light convert it to .?

Last Answer : Optically active

What Substances that absorb light convert it to what energy?

Description : What Substances that absorb light convert it to what energy?

Last Answer : Optically active

When a metal is heated in a flame, the electrons absorb energy and jump to higher energy state. On coming back to the lower energy state, they emit light, which we can observe in - (1) Raman spectra (2) Absorption spectra (3) Emission spectra (4) Fluorescence

Description : When a metal is heated in a flame, the electrons absorb energy and jump to higher energy state. On coming back to the lower energy state, they emit light, which we can observe in - (1) Raman spectra (2) Absorption spectra (3) Emission spectra (4) Fluorescence

Last Answer : (3) Emission spectra Explanation: When a metal atom is strongly heated, its electrons absorb the heat energy and jump to a higher energy level. When the electron returns to its original position it ... to the energy the electron has released at each stage °fits fall back to its original state.

Purpose of an optical filter is to – (1) reflect lights of different colours (2) dispense light into component colours (3) refract light of different colours (4) transmit or absorb light of different colours

Description : Purpose of an optical filter is to – (1) reflect lights of different colours (2) dispense light into component colours (3) refract light of different colours (4) transmit or absorb light of different colours

Last Answer : (4) transmit or absorb light of different colours Explanation: Optical filters are devices that selectively transmit light in a particular range of wavelengths, that is, colors, while ... as absorptive filters), fluorescence microscopy, spectroscopy, clinical chemistry, colour stage lighting, etc.

Light colours absorb less heat therefore these are not heated as much as the black colour.

Description : Light colours absorb less heat therefore these are not heated as much as the black colour.

Last Answer : Ans: Dark colours do not exactly absorb more heat, but they do convert a higher percentage of light into heat. In the sun with a dark coloured shirt it gets hot, where a lighter ... and converted into heat. White objects reflect all visible light, where black objects absorb all visible light.

Which component of the protein absorb UV light at 280 nm?

Description : Which component of the protein absorb UV light at 280 nm?

Last Answer : Indole ring of tryptophan.

Which of the following absorb light energy for photosynthesis? (a) Chlorophyll (b) Water molecule (c) O2 (d) RuBP

Description : Which of the following absorb light energy for photosynthesis? (a) Chlorophyll (b) Water molecule (c) O2 (d) RuBP

Last Answer : a) Chlorophyll

It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss

Last Answer : B. absorption loss

It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT

Last Answer : absorption loss

Antireflection coating is helps in which case of the following? A. Minimizing the reflection of light from top surface B. To absorb and control the amount of light entering into the medium C. To allow maximum light to reflect from top surface D. To allow minimum light to enter into the medium

Description : Antireflection coating is helps in which case of the following? A. Minimizing the reflection of light from top surface B. To absorb and control the amount of light entering into the medium C. To allow maximum light to reflect from top surface D. To allow minimum light to enter into the medium

Last Answer : A. Minimizing the reflection of light from top surface

When a metal is heated in a flame, the electrons absorb energy and jump to higher energy state. On coming back to the lower energy siate, they emit light, which we can observe in (1) Raman spectra (2) Absorption spectra (3) Emission spectra (4) Fluorescence

Description : When a metal is heated in a flame, the electrons absorb energy and jump to higher energy state. On coming back to the lower energy siate, they emit light, which we can observe in (1) Raman spectra (2) Absorption spectra (3) Emission spectra (4) Fluorescence

Last Answer : Emission spectra

Purpose of an optical filter is to (1) reflect lights of different colours (2) dispense light into component colours (3) refract light of different colours (4) transmit or absorb light of different colours

Description : Purpose of an optical filter is to (1) reflect lights of different colours (2) dispense light into component colours (3) refract light of different colours (4) transmit or absorb light of different colours

Last Answer :  transmit or absorb light of different colours

One method of testing for a reversed shunt field coil in a DC generator or motor is by connecting the field to a direct current source, at reduced field rated voltage, and test for polarity using a/an ____________. A. iron bar across each field B. magnetic compass placed near each field C. test lamp across adjacent fields D. copper jumper across the interpole connections

Description : One method of testing for a reversed shunt field coil in a DC generator or motor is by connecting the field to a direct current source, at reduced field rated voltage, and test for ... placed near each field C. test lamp across adjacent fields D. copper jumper across the interpole connections

Last Answer : Answer: B

What are materials used in production in a manufacturing company or are placed on the shelf for sale in a retail environment? a. Direct materials b. Indirect materials c.EDI d. None of the above

Description : What are materials used in production in a manufacturing company or are placed on the shelf for sale in a retail environment? a. Direct materials b. Indirect materials c.EDI d. None of the above

Last Answer : a. Direct materials

An indent in Form SK 85 in duplicate will be placed direct on eh a) Store depot b) Circle office c) Supplying agency d) None of these

Description : An indent in Form SK 85 in duplicate will be placed direct on eh a) Store depot b) Circle office c) Supplying agency d) None of these

Last Answer : c) Supplying agency

What are materials used in production in a manufacturing company or are placed on the shelf for sale in a retail environment? a. Direct materials b. Indirect materials c. EDI d. None of the above

Description : What are materials used in production in a manufacturing company or are placed on the shelf for sale in a retail environment? a. Direct materials b. Indirect materials c. EDI d. None of the above

Last Answer : a. Direct materials

The weight of an object will be maximum when it is placed at a.North pole b.South pole c.Equator d.Centre of earth e.Any of the above loctions

Description : The weight of an object will be maximum when it is placed at a.North pole b.South pole c.Equator d.Centre of earth e.Any of the above loctions

Last Answer : d. Centre of earth

In order to figure out what is in a sealed box, you perform some tests. The box seems heavy for its size and is harder to remove from a steel table than when placed on a concrete floor. What kind of object could be inside the box?' -Riddles

Description : In order to figure out what is in a sealed box, you perform some tests. The box seems heavy for its size and is harder to remove from a steel table than when placed on a concrete floor. What kind of object could be inside the box?' -Riddles

Last Answer : The answer is magnet because it would be really hard to move a magnet across a steel table since it would attract to the steel-not making it able to move.

15. An object 2 cm high is placed at a distance of 64 cm from a white screen. On placing a convex lens at a distance of 32 cm from the object it is found that a distinct image of the object is formed on the screen. What is the focal length of the conve -Chemistry-10

Description : 15. An object 2 cm high is placed at a distance of 64 cm from a white screen. On placing a convex lens at a distance of 32 cm from the object it is found that a distinct image of the object is formed on the screen. What is the focal length of the conve -Chemistry-10

Last Answer : Since, object-screen distance is double of object-lens separation, the object is at a distance of 2f from the lens and the image should be of the same size of the object.