Description : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift speed and resistance both will increase at a section
Last Answer : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift ... . If Assertion is false but Reason is true.
Description : Assertion : If a current flows through a wire of non-uniform cross-section, potential difference per unit length of wire is same throughout the length
Last Answer : Assertion : If a current flows through a wire of non-uniform cross-section, potential difference per ... . If Assertion is false but Reason is true.
Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0
Last Answer : (B) 12.88
Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose endsare hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2, the permissible maximumcrippling load will be (a) 1.288 tonnes (b) 12.88 (c) 128.8 tonnes (d) 288.0
Last Answer : (b) 12.88
Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero
Last Answer : a. remains the same
Description : An electron moves in a circular orbit of radius 10 cm with a constant speed of `4.0xx10^(6) ms^(-1)`. Determine the electric current at a point on the
Last Answer : An electron moves in a circular orbit of radius 10 cm with a constant speed of `4.0xx10^(6 ... Determine the electric current at a point on the orbit.
Description : Calculate the conductivity of a wire of length 2 m, area of cross-sectionl `2 cm^(2)` and resistance `10^(-4) Omega`.
Last Answer : Calculate the conductivity of a wire of length 2 m, area of cross-sectionl `2 cm^(2)` and resistance `10^(-4) Omega`.
Description : The size of a carbon block is `1.0xx10 cm xx50 cm`. Find its resistance (i) between the opposite square faces (ii) between the opposite rectangular fa
Last Answer : The size of a carbon block is `1.0xx10 cm xx50 cm`. Find its resistance (i) between the opposite square ... of carbon is `3.5xx10^(-5) Omega cm`.
Description : A metal wire of specific resistance `64xx10^(-6) Omega` m and length 1.98 cm has a resistance of `7 Omega`. Find its radius.
Last Answer : A metal wire of specific resistance `64xx10^(-6) Omega` m and length 1.98 cm has a resistance of `7 Omega`. Find its radius.
Description : A solenoid has length `0.4cm`, radius 1 cm and 400 turns of wire. If a current fo 5 A is passed through this solenoid, then what is the magnetic field
Last Answer : A solenoid has length `0.4cm`, radius 1 cm and 400 turns of wire. If a current fo 5 A is passed through this ... `6.28xx10^(-7)T` D. `6.28xx10^(-6)T`
Description : `AB` is a wire of uniform resistance. The galvanometer `G` shows no deflection when the length `AC = 20 cm` and `CB = 80 cm`. The resistance `R` is eq
Last Answer : `AB` is a wire of uniform resistance. The galvanometer `G` shows no deflection when the length `AC = 20 cm ... ` B. `8Omega` C. `20Omega` D. `40Omega`
Description : A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area of cross-section gets halved. Now, th
Last Answer : A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area ... Omega` C. `1 Omega` D. `4 Omega`
Description : A metal wire of circular cross-section has a resistance `R_(1)`. The wire is now stretched without breaking, so that its length is doubled and the den
Last Answer : A metal wire of circular cross-section has a resistance `R_(1)`. The wire is now stretched without breaking, so that its ... 2` C. `4 : 1` D. `1 : 4`
Last Answer : A wire of resistance R has it length and cross-section both doubled. Its resistance will become R.
Description : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)`. If 0.2 A current is flowing throug
Last Answer : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)` ... . `3.2xx10^(-2)V//m` D. `1V//m`
Description : Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature
Last Answer : it is directly proportional to the area of cross-section of wire
Description : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V battery, the resistivity of wire is
Last Answer : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V ... `4xx10^(-6)Omega-m` D. `1xx10^(-6)Omega-m`
Description : Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in ... ) A 100 m tape of cross section 10 mm 0.25 mm stretches about 10 mm under 5 kg pull
Last Answer : (B) An increase in temperature causes a tape to increase in length and the measured distance is too large
Description : A current of `10` ampere is flowing in a wire of length `1.5m`. A force of `15 N` acts on it when it is placed in a uniform magnetic field of `2` tesl
Last Answer : A current of `10` ampere is flowing in a wire of length `1.5m`. A force of `15 N` acts on it when it is placed ... `45^(@)` C. `60^(@)` D. `90^(@)`
Description : A metel rod of the length 10cm and a rectangular cross-section of 1 cm xx `1//2` cm is connected to a battery across opposite faces. The resistance wi
Last Answer : A metel rod of the length 10cm and a rectangular cross-section of 1 cm xx `1//2` cm is ... 2)` cm faces D. same irrepective of the three faces
Description : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)`. If each cubic metre of the wire contains `10^(29)` free
Last Answer : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)` ... taken by an electron to cross the length of the wire.
Description : A copper wire of diameter 0.16 cm is connected in series to an aluminium wire of diameter 0.25 cm. A current of 10 A is passed through them. Find (i)
Last Answer : A copper wire of diameter 0.16 cm is connected in series to an aluminium wire of diameter 0.25 cm. A ... of aluminium wire is `10^(29) m^(-3)`.
Description : A stready current i is flowing through a conductor of uniform cross-section. Any segment of the conductor has
Last Answer : A stready current i is flowing through a conductor of uniform cross-section. Any segment of the ... charge D. charge proportional to current `i`
Description : Potentiometer wire of length `1 m` is connected in series with `490 Omega` resistance and `2 V` battery. If `0.2 mV/cm` is the potential gradient, the
Last Answer : Potentiometer wire of length `1 m` is connected in series with `490 Omega` resistance and `2 V` battery. If ... 7.9Omega` C. `5.9Omega` D. `6.9Omega`
Description : Change in length and cross-sectional area of metal wire changes A. current B. voltage C. resistance D. magnetic effect
Last Answer : resistance
Description : Elongation of a bar of uniform cross section of length ‘L’, due to its own weight ‘W’ is given by a. 2WL/E b. WL/E c. WL/2E d. WL/3E Where, E=Young’s modulus of elasticity of material
Last Answer : c. WL/2E
Description : When a fluid flows over a solid surface, the (A) Velocity is uniform at any cross-section (B) Velocity gradient is zero at the solid surface (C) Resistance between the surface & the fluid is lesser as compared to that between the fluid layers themselves (D) Velocity is not zero at the solid surface
Last Answer : (B) Velocity gradient is zero at the solid surface
Description : Uniform flow occurs when (A) The flow is steady (B) The flow is streamline (C) Size and shape of the cross section in a particular length remain constant (D) Size and cross section change uniformly along length
Last Answer : Answer: Option C
Description : A standard steel tape of length 30 m and cross-section 15 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of ... (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these
Last Answer : (A) - 0.000909 m
Description : A current of 5 ampere is passing through a metallic wire of cross-sectional area `4xx10^(-6) m^(2)`. If the density of the charge-carriers in the wire
Last Answer : A current of 5 ampere is passing through a metallic wire of cross-sectional area `4xx10^(-6) m^(2)`. If the ... ms^(-1)` D. `1xx10^(-2)ms^(-1)`
Description : An electron gun emits `2.0xx10^(16)` electrons per second. What is the associated current ?
Last Answer : An electron gun emits `2.0xx10^(16)` electrons per second. What is the associated current ?
Description : A uniform wire which connected in parallel with the 2 m long wire, will give a resistance of `2.0 Omega`.
Last Answer : A uniform wire which connected in parallel with the 2 m long wire, will give a resistance of `2.0 Omega`.
Description : What is the resistance of a 160 m wire with a uniform diameter of 0.28 mm, if the specific resistance is 12.32 μΩ-cm? A) 3.2 Ω B) 3.2 μΩ C) 0.8 Ω D) None of these
Last Answer : What is the resistance of a 160 m wire with a uniform diameter of 0.28 mm, if the specific resistance is 12.32 μΩ-cm? A) 3.2 Ω B) 3.2 μΩ C) 0.8 Ω D) None of these
Description : Pick up the incorrect statement from the following: In a dry dock block made of hard wood, (A) Spacing of the blocks is 1.35 m (B) The lowest block is 1.8 m long 40 cm × 40 cm in cross-section (C) The middle block is 1.6 m long 40 cm × 40 cm in cross-section (D) None of these
Last Answer : (D) None of these
Description : A uniform slope was measured by the method of stepping. If the difference in level between two points is 1.8 m and the slope distance between them is 15 m, the error is approximately equal to (A) Cumulative, + 0.11 m (B) Compensating, ± 0.11 m (C) Cumulative, - 0.11 m (D) None of these
Last Answer : (A) Cumulative, + 0.11 m
Description : For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section
Last Answer : (6) electrical conductivity
Description : The length of line measured by 20 m chain was found to be 751 m. The chain was tested before start of measurement and was found correct. The chain was again tested after measurement and was found 6 cm too short. What shall be the correct length of line ?
Last Answer : Given Data: Standard length of chain (L)= 20m Measured Length (M.L.) = 751 m Error before start of measurement = 0.0 Error after measurement = 6 cm = 0.06 m To Find: Actual length or Correct length Solution: ... (L'/L) = (751) x (19.97/20) = 749.87 Correct length of line is 749.87 m
Description : Two wires a and b, each of length 40 m and area of cross-section `10^(-7) m^(2)` , are connected in series and a potenital difference of 60 V is appli
Last Answer : Two wires a and b, each of length 40 m and area of cross-section `10^(-7) m^(2)` ... resistance, (ii) electric-field and (iii) current-dentsity.
Description : Which one of the following is the correct ratio of plastic moment to yield moment for a simply supported beam of uniform square cross section throughout the span (a) 1.5 (b) 1.7 (c) 2.0 (d) 2.34
Last Answer : (a) 1.5
Description : When the rate of flow of charge through a metallic condoctor of non-uniform cross-section is uniform, then the quantity that remains constant along th
Last Answer : When the rate of flow of charge through a metallic condoctor of non-uniform cross-section is ... . electric field C. electric potential D. current
Description : An approximately __________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section. (A) Adiabatic (B) Isothermal (C) Isentropic (D) Isochoric
Last Answer : (B) Isothermal
Description : The resistance of electric wire will decrease as its _______________. A. length increases B. cross-sectional area increases C. temperature increases D. percent of metallic purities increases
Last Answer : Answer: B
Description : What happens to the resistance of a wire when its length as well as the cross-sectional area are doubled? A) It doubles B) It becomes 4 times C) It becomes 2π times D) It remains the same
Last Answer : Automatically the resistivity will increase as they are the factors affecting the resistivity
Description : An electron is travelling at right angles to a uniform magnetic field of flux density 1.2 mT with a speed of 8 × 106 m s-1, the radius of circular path followed by electron is A. 3.8 cm B. 3.7 cm C. 3.6 cm D. 3.5 cm
Last Answer : 3.8 cm
Description : A current of 5.8 A flows through a 0.25 m long straight conductor which is kept perpendicular in a region of uniform magnetic field of 3.7 T . The force on conductor is a) 5.4 N b) 2.4 N c) 3.4 N d) 6.4 N
Last Answer : a) 5.4 N
Description : Water flows in a tank 150 m × 100 m at the base, through a pipe whose cross-section is 2 dm by 1.5 dm, at a speed of 15 km per hour. -Maths 9th
Last Answer : Volume of water discharged through the pipe = Volume increase of the tank First, consider the pipe. Volume discharge through pipe = length breadth speed time Let the time taken to fill the tank to 3 m depth be t. ... the tank V=150 100 3 cu. m ⇒ V=450 100 Therefore, 450t=450 100 ⇒ t=100 hours
Description : AB is a potentiometer wire of length 100 cm and its resistance is `10Omega`. It is connected in series with a resistance R = 40 `Omega` and a battery
Last Answer : AB is a potentiometer wire of length 100 cm and its resistance is `10Omega`. It is connected in series with a ... `1.6V` C. `0.08V` D. `0.16V`
Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (A) 200 (B) 240 (C) 360 (D) 416
Last Answer : (D) 416
Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 240 (b) 416 (c) 360 (d) 400
Last Answer : (b) 416
Description : The slenderness ratio of a vertical column of a square cross-section of 2.5 cm sides and 300 cm length, is (a) 200 (b) 240 (c) 360 (d) 416
Last Answer : (d) 416