Description : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift speed and resistance both will increase at a section
Last Answer : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift ... . If Assertion is false but Reason is true.
Description : A negligbly small current is passed through a wire of length 15 cm and uniform cross-section `6.0xx10^(-7) m^(2)` and its resistance is measured to be
Last Answer : A negligbly small current is passed through a wire of length 15 cm and uniform cross-section ` ... the material at the temperature of the experiment ?
Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero
Last Answer : a. remains the same
Description : A cross a metallic conductor of non-uniform cross-section, a constant potential difference is applied. The quantity which remain (s) constant along th
Last Answer : A cross a metallic conductor of non-uniform cross-section, a constant potential difference is applied ... current C. drift velocity D. electric field
Description : A beam of uniform strength has a. same cross-section throughout the beam b. same bending stress at every section c. same bending moment at every section d. same shear stress at every section
Last Answer : b. same bending stress at every section
Description : When a current of `(2.5 +- 0.5)` ampere flows through a wire, it develops a potential difference of `(20 +- 1)` volt, the resistance of the wire is
Last Answer : When a current of `(2.5 +- 0.5)` ampere flows through a wire, it develops a potential difference of `(20 +- ... `(8 pm 1.5)Omega` D. `(8 pm 3)Omega`
Description : When a fluid flows over a solid surface, the (A) Velocity is uniform at any cross-section (B) Velocity gradient is zero at the solid surface (C) Resistance between the surface & the fluid is lesser as compared to that between the fluid layers themselves (D) Velocity is not zero at the solid surface
Last Answer : (B) Velocity gradient is zero at the solid surface
Description : The following assumption is not true in the theory of pure torsion: (A) The twist along the shaft is uniform (B) The shaft is of uniform circular section throughout (C) Cross- ... , which is plane before twist remains plane after twist (D) All radii get twisted due to torsion
Last Answer : (D) All radii get twisted due to torsion
Description : Which one of the following is the correct ratio of plastic moment to yield moment for a simply supported beam of uniform square cross section throughout the span (a) 1.5 (b) 1.7 (c) 2.0 (d) 2.34
Last Answer : (a) 1.5
Description : The current through a wire depends on time as `I=I_(0)+alpha t`, where `I_(0)=10` A and `alpha=4 As^(-1)`. Find the charge that flows across a section
Last Answer : The current through a wire depends on time as `I=I_(0)+alpha t`, where `I_(0)=10` A and ... that flows across a section of the wire in 10 seconds.
Description : If a constant section beam is subjected to a uniform bending moment throughout, its length bends to (A) A circular arc (B) A parabolic arc (C) A catenary (D) None of these
Last Answer : (A) A circular arc
Description : Water flows in a tank 150 m × 100 m at the base, through a pipe whose cross-section is 2 dm by 1.5 dm, at a speed of 15 km per hour. -Maths 9th
Last Answer : Volume of water discharged through the pipe = Volume increase of the tank First, consider the pipe. Volume discharge through pipe = length breadth speed time Let the time taken to fill the tank to 3 m depth be t. ... the tank V=150 100 3 cu. m ⇒ V=450 100 Therefore, 450t=450 100 ⇒ t=100 hours
Description : Owing to skin effect (a) current flows through the half cross-section of the conductor (b) portion of the conductor near the surface carries more current and core of the conductor carries less current (c) ... core of the conductor carries more cur¬rent (d) any of the above (e) none of the above
Last Answer : (b) portion of the conductor near the surface carries more current and core of the conductor carries less current
Description : he pressure drop per unit length of pipe incurred by a fluid 'X' flowing through pipe is Δp. If another fluid 'Y' having both the specific gravity & density just double of that of fluid 'X', flows through the same pipe ... then the pressure drop in this case will be (A) Δp (B) 2Δp (C) Δp 2 (D) Δp/2
Last Answer : (B) 2Δp
Description : For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section
Last Answer : (6) electrical conductivity
Description : Assertion : Current between two points in an electrical always flows from higher potential to lower potential. Reason : During charging of a battery c
Last Answer : Assertion : Current between two points in an electrical always flows from higher potential to lower ... . If both Assertion and Reason are false.
Description : When the rate of flow of charge through a metallic condoctor of non-uniform cross-section is uniform, then the quantity that remains constant along th
Last Answer : When the rate of flow of charge through a metallic condoctor of non-uniform cross-section is ... . electric field C. electric potential D. current
Description : A beam is said to be of uniform strength, if (A) B.M. is same throughout the beam (B) Shear stress is same throughout the beam (C) Deflection is same throughout the beam (D) Bending stress is same at every section along its longitudinal axis
Last Answer : (D) Bending stress is same at every section along its longitudinal axis
Description : Assertion A flexeble wire loop of irregular shape carrying current when placed in a uniform external magnetic field acquires a circular shape. Reason
Last Answer : Assertion A flexeble wire loop of irregular shape carrying current when placed in a uniform external ... circular shape is having the greatert area.
Description : A stready current i is flowing through a conductor of uniform cross-section. Any segment of the conductor has
Last Answer : A stready current i is flowing through a conductor of uniform cross-section. Any segment of the ... charge D. charge proportional to current `i`
Description : An electric current of `2.0 mu A` exists in a discharge tube. How much charge flows across a cross-section of the tube in 5 minutes ?
Last Answer : An electric current of `2.0 mu A` exists in a discharge tube. How much charge flows across a cross-section of the tube in 5 minutes ?
Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0
Last Answer : (B) 12.88
Description : Uniform flow occurs when (A) The flow is steady (B) The flow is streamline (C) Size and shape of the cross section in a particular length remain constant (D) Size and cross section change uniformly along length
Last Answer : Answer: Option C
Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose endsare hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2, the permissible maximumcrippling load will be (a) 1.288 tonnes (b) 12.88 (c) 128.8 tonnes (d) 288.0
Last Answer : (b) 12.88
Description : Elongation of a bar of uniform cross section of length ‘L’, due to its own weight ‘W’ is given by a. 2WL/E b. WL/E c. WL/2E d. WL/3E Where, E=Young’s modulus of elasticity of material
Last Answer : c. WL/2E
Description : A liquid flows through a capillary tube. Then the velocity of the liquid is (a) Maximum at the walls of the tubs (b) Constant at all points in the cross section of the tube (c) Maximum along the axis of the tube (d) Independent of the pressure-head
Last Answer : Ans:(c)
Description : A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area of cross-section gets halved. Now, th
Last Answer : A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area ... Omega` C. `1 Omega` D. `4 Omega`
Description : A metal wire of circular cross-section has a resistance `R_(1)`. The wire is now stretched without breaking, so that its length is doubled and the den
Last Answer : A metal wire of circular cross-section has a resistance `R_(1)`. The wire is now stretched without breaking, so that its ... 2` C. `4 : 1` D. `1 : 4`
Description : Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature
Last Answer : it is directly proportional to the area of cross-section of wire
Last Answer : A wire of resistance R has it length and cross-section both doubled. Its resistance will become R.
Description : The magnetic field at a point on the axis of a long solenoid having 5 turns per cm length when a current of 0.8 A flows through it is
Last Answer : The magnetic field at a point on the axis of a long solenoid having 5 turns per cm length when a current of 0.8 A ... )` D. `8.024xx10^(-8) Wb//m^(2)`
Description : A current of 5.8 A flows through a 0.25 m long straight conductor which is kept perpendicular in a region of uniform magnetic field of 3.7 T . The force on conductor is a) 5.4 N b) 2.4 N c) 3.4 N d) 6.4 N
Last Answer : a) 5.4 N
Description : A current of 0.2A flows through a component with a resistance of 40 ohms. Calculate the potential difference.?
Last Answer : 8
Description : A 10 C of charge flows through a wire in 5 minutes. The radius of the wire is 1 mm. It contains `5xx10^(22)` electrons per `"centimetre"^(3)`. Calcula
Last Answer : A 10 C of charge flows through a wire in 5 minutes. The radius of the wire is 1 mm. It ... centimetre"^(3)`. Calculate the current and drift velocity.
Description : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)`. If each cubic metre of the wire contains `10^(29)` free
Last Answer : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)` ... taken by an electron to cross the length of the wire.
Description : A current of `10` ampere is flowing in a wire of length `1.5m`. A force of `15 N` acts on it when it is placed in a uniform magnetic field of `2` tesl
Last Answer : A current of `10` ampere is flowing in a wire of length `1.5m`. A force of `15 N` acts on it when it is placed ... `45^(@)` C. `60^(@)` D. `90^(@)`
Description : An approximately __________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section. (A) Adiabatic (B) Isothermal (C) Isentropic (D) Isochoric
Last Answer : (B) Isothermal
Description : What does an electric current act like when it flows through a wire, according to Hans Christian Oersted's hypothesis?
Last Answer : a magnet
Description : What happens when a current flows through a wire?
Last Answer : Current can produce two effect one is heating effect and second is magnetic effect.
Description : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V battery, the resistivity of wire is
Last Answer : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V ... `4xx10^(-6)Omega-m` D. `1xx10^(-6)Omega-m`
Description : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)`. If 0.2 A current is flowing throug
Last Answer : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)` ... . `3.2xx10^(-2)V//m` D. `1V//m`
Description : When current of one ampere is flowing across any cross-section of wire in one second, then the quantity of charge is said to be: (a) One coulomb (b) Three coulomb (c) One micro-coulomb (d) None of above
Last Answer : (a) One coulomb
Description : The distribution of the forces along the length of key fitted in a shaft (A) Varies linearly (B) Is uniform throughout (C) Varies exponentially, being more near the torque-input end (D) Varies exponentially, being less near the torque-input end
Last Answer : (C) Varies exponentially, being more near the torque-input end
Description : In a 2700 m race around a round track of length 300m, abi and kabi meet at the end of the 3rd minute, for the first time after the start of the race. All the runners maintain uniform speed throughout the race. ... time taken by abi to finish the race. a) 27 mints b) 32 mints c) 5 mints d) 23 mints
Last Answer : A As, abi is twice as fast as the kabi, abi would have completed two rounds by the time kabi completes one round. And that is their second meeting. Their first meeting takes place after the abi ... 300m ⇒He takes 2700/300 *3 =27 mints Hence he takes 27 minutes to finish the race.
Description : Consider the following statements: Mitra's hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate ... a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only
Last Answer : d) 1 and 3 only
Description : Assertion : Two resistance wires shown in figure are of same material. They have equal length. More heat is generated in wire A. Reason : In series `H
Last Answer : Assertion : Two resistance wires shown in figure are of same material. They have equal length. More ... . If Assertion is false but Reason is true.
Description : The spring index is, (A) Ratio of wire diameter to mean coil diameter (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection
Last Answer : (C) Ratio of mean coil diameter to wire diameter
Description : The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection
Last Answer : (D) Force required to produce unit deflection
Description : A current of `2 A` flows in a system of conductor as shown. The potential difference `(V_(A) - V_(B))`
Last Answer : A current of `2 A` flows in a system of conductor as shown. The potential difference `(V_(A) - V_(B))` A. `-1V` B. `+1V` C. `-2V` D. `+2V`
Last Answer : A current of `2 A` flows in a system of conductor as shown. The potential difference `(V_(A) - V_(B))` A. `+1V` B. `-1V` C. `+2V` D. `-2V`