Description : Normalising does not __________ of a metal. (A) Improve machinability & tensile strength (B) Remove internal stresses (C) Refine the structure (D) Remove strains caused by cold working
Last Answer : Option B
Description : Which one of the following impurity is not desirable in the soil used for brick formation a) Alkali b) Kankar c) Iron oxide d) Alkali & Kankar*
Last Answer : d) Alkali & Kankar*
Description : Cast iron contains phosphorus as impurity. In Bessemerisation of this cast iron the slag formed is
Last Answer : Cast iron contains phosphorus as impurity. In Bessemerisation of this cast iron the slag formed is A. `FePO_(4)` B. ` ... (4)` D. `Zn_(3)(PO_(4))_(2)`
Description : If the iron ore contains clay as an impurity, the flux added during calcination, is (A) Clay (B) Lime stone (C) Argillaceous iron ore (D) All the above
Last Answer : Answer: Option B
Description : If the impurity in a metal has a greater affinity for oxygen and is more easily oxidised than the metal, then the purification of metal may be carried
Last Answer : If the impurity in a metal has a greater affinity for oxygen and is more easily oxidised than ... B. electrorefining C. Zone refining D. POILING
Description : By increasing impurity content in the metal alloy the residual resistivity always
Last Answer : By increasing impurity content in the metal alloy the residual resistivity always increases.
Description : What is Refine ?
Last Answer : Refine .
Description : What is the meaning of the word refine ?
Last Answer : purify. Absorb , purify , purify or purify
Description : How does Du Bois refine a central idea in paragraph 5?
Last Answer : Need answer
Description : How much cotton could a slave produce and refine?
Last Answer : Feel Free to Answer
Description : In the last step of the troop leading process you as leader must supervise and refine the units preparation?
Description : You can“““.asearchby providing more information thesearchengine can use to select asmaller, more useful setof results. (A) refine (B) expand (C) load (D) query (E) slowdown
Last Answer : refine
Description : Normalising of a casting does not (A) Induce stresses in it (B) Refine its grain structure (C) Reduce segregation (D) Improve its mechanical properties
Last Answer : (A) Induce stresses in it
Description : Normalising of an object does not (A) Refine coarse grain structure obtained during hot working (B) Improve ductility (C) Improve yield strength (D) Improve mechanical properties
Last Answer : (B) Improve ductility
Description : Which of the following is Not a part of research a. Diligent study b. Unsystematic inquiry c. Refine existing knowledge d. Validate the knowledge
Last Answer : b. Unsystematic inquiry
Description : MOS stands for 1) Metal Oxide Semiconductor 2) Most Often Store 3) Method Organised Stack 4) None of these
Last Answer : 2) Most Often Store
Last Answer : Yes. লেই Washing the unclean place will make you clean
Description : When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes are
Last Answer : When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes ... "),("Pure Zinc","ImPure Zinc"):}`
Description : Which one of the following elements is present as a major impurity in pig iron ?
Last Answer : Which one of the following elements is present as a major impurity in pig iron ? A. graphite B. oxygen C. sulphur D. silicon
Description : Silver is refined by cupellation process, the process removes the impurity of:
Last Answer : Silver is refined by cupellation process, the process removes the impurity of: A. Cu B. Au C. Pb D. Pt
Description : The chief impurity present in bauxite is
Last Answer : The chief impurity present in bauxite is A. `SiO_(2)` B. `Fe_(2)O_(3)` C. `K_(2)SO_(4)` D. NaF
Description : Silver containing lead as an impurity is not purified by
Last Answer : Silver containing lead as an impurity is not purified by A. Poling B. Distillation C. cupellation D. Levigation
Description : When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are :
Last Answer : When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are ... 4)","Impure zinc","Impure sample"):}`
Description : When copper pyrites is roasted in excess of air, a mixture of `CuO + FeO` is formed. `FeO` is present as impurity. This can be removed as slag during
Last Answer : When copper pyrites is roasted in excess of air, a mixture of `CuO + FeO` is formed. `FeO` is present ... a basic flux D. CaO, which is a basic flux
Description : The impurity present in Blister copper is
Last Answer : The impurity present in Blister copper is A. FeS B. `Cu_(2)O` C. `Cu_(2)S` D. FeO
Description : The magnetic impurity present in cassiterite ore is
Last Answer : The magnetic impurity present in cassiterite ore is A. Silica B. Wolframite C. `SnO_(2)` D. Clay
Description : Impurity along `SO_(2)` is __ and it is removed by
Last Answer : Impurity along `SO_(2)` is __ and it is removed by A. `As_(2)O_(3),Fe_(2)O_(3),xH_(2)O` B. `H_(2)S,Al(OH ... 2)O` D. `AS_(2)O_(3),Al_(2)O_(3),xH_(2)O`
Description : The impurity percentage of seed
Last Answer : Ans. Dockage
Description : __________ chloride present in crude petroleum as impurity is the most prolific producer of HCl during distillation. (A) Magnesium (B) Potassium (C) Calcium (D) Sodium
Last Answer : (A) Magnesium
Description : The impurity present in the ore?
Last Answer : Gangue
Description : __________ is a donor impurity for semi-conductors. (A) Boron (B) Antimony (C) Gallium (D) None of these
Last Answer : (B) Antimony
Description : Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B)
Description : A small quantity of impurity reduces how much of conductivity of copper?
Last Answer : 35% of conductivity will be reduced due a small impurity in the conductor.
Description : Water may not contain much impurity if its source is (A) Reservoirs (B) Stream flowing in plains (C) Lakes in lower regions (D) Spring along hill slopes
Last Answer : (D) Spring along hill slopes
Description : When a sample of germanium and silicon having same impurity density are kept at room temperature then Resistivity of silicon will be higher than that of germanium, Why?
Last Answer : Ans-The answer is simple. Consider the PN diode for Ge 0.3eV is the breakdown voltage and in the case of Si its 0.7eV since the impurities are added in the same amount the bond due to the other atoms of the Si makes it resistive compared to the Ge.. thats all!
Description : The most detrimental impurity in high pressure boiler feed water is (A) Suspended salt (B) Dissolved salt (C) Silica (D) Turbidity
Last Answer : Option C
Description : The impurity of mixing water which affects the setting time and strength of concrete, is (A) Sodium sulphates (B) Sodium chlorides (C) Sodium carbonates and bicarbonates (D) Calcium bicarbonates
Last Answer : Answer: Option C
Description : Which of the following is not a result of the excess of impurity in boiler-feed. a) Scale and sludge formation b) Decomposition c) Corrosion, priming and foaming d) Caustic embrittlement
Last Answer : b) Decomposition
Description : Which of the following techniques would be most useful to determine the mass of an impurity in a drug substance? A. NMR B. MS C. IR D. HPLC
Last Answer : B. MS
Description : Application of HPLC includes? A. Detection of functional groups in organic compounds B. Determination of molecular mass C. Separation of volatile compounds D. Impurity profiling
Last Answer : D. Impurity profiling
Description : A semiconductor formed by addition of trivalent impurity is : a) P–Type b) N–Type c) Q–type d) M–Type
Last Answer : d) M–Type
Description : The process of addition of impurity in pure semiconductor is : a) Doping b) Radiating c) Mixing d) Insulating
Last Answer : d) Insulating
Description : Addition of trivalent impurity to a semiconductor creates many (A) holes. (B) free electrons. (C) valance electrons. (D) bound electrons.
Last Answer : (B) free electrons.
Description : When a semiconductor is doped with a P-type impurity, each impurity atom will (A) acquire negative charge. (B) acquire positive charge. (C) remain electrically neutral. (D) give away one electron.
Last Answer : (A) acquire negative charge.
Description : In order to obtain p-type germanium it should be doped with a (A) Trivalent impurity. (B) Tetravalent impurity. (C) Pentavalent impurity. (D) Any of the above will do.
Last Answer : (A) Trivalent impurity.
Description : In n type semi conductor added impurity is (A) pentavalent. (B) divalent. (C) tetravalent. (D) trivalent.
Last Answer : (A) pentavalent.
Description : Which of the following techniques would be most useful to identify and quantify the presence of a known impurity in a drug substance? A. NMR B. MS C. IR D. HPLC
Last Answer : IR
Description : Explain types of impurity added in a semiconductor with one example each.
Last Answer : There are two types of impurities added in a intrinsic semiconductor which are as follows 1.Donor Impurity 2.Acceptor Impurity 1.Donor Impurity - These are pentavalent which means they have five ... called as Acceptor doping. It is used to manufacture P-type semiconductor Eg:Boron,Gallium,Indium
Description : Impurity atoms to be added to pure silicon in order to make a p-type semiconductor belongs to (a) Phosphorous (b) Boron (c) Antimony (d) Aluminium
Last Answer : Boron , a group three element.
Description : Which of the following serves as donor impurity in Silicon? (A) Boron (B) Indium (C) Germanium (D) Antimony
Last Answer : Which of the following will serve as a donor impurity in silicon? (A) Boron (B) Indium (C) Germanium (D) Antimony