Calculate surface area to volume ratio of spherical particle.

1 Answer

Answer :

Calculate surface area to volume ratio of spherical particle. See how the ratio increases with the ... particle. Plot the ratio against the radius.

Related questions

Description : For a non-spherical particle, the sphericity (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle (B) Has ... of volume of a sphere having the same surface area as the particle to the actual volume of the particle

Last Answer : (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle

Description : Sphericity is the ratio of the surface area of a spherical particle having the same volume as the particle to the surface area of the particle. Which of the following has the maximum value of sphericity? (A) Sphere (B) Cube (C) Cylinder (L/D = 1) (D) Raschig rings

Last Answer : (A) Sphere

Description : . Equivalent diameter of a particle is the diameter of the sphere having the same (A) Ratio of surface to volume as the actual volume (B) Ratio of volume to surface as the particle (C) Volume as the particle (D) None of these

Last Answer : (A) Ratio of surface to volume as the actual volume

Description : According to Bond crushing law, the work required to form particle of size 'D' from very large feed is (where (S/V)p and (S/V) f are surface to volume ratio of the product and feed respectively). (A) (S/V)p (B) √(S/V)p (C) (S/V) 2 p (D) (S/V) f

Last Answer : (B) √(S/V)

Description : Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a ... ) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Last Answer : (C) Work required in crushing is proportional to the new surface created

Description : Bond crushing law (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law (B) Is less realistic in estimating the power requirements of commercial crushers ( ... (D) States that the work required for the crushing is proportional to the new surface created

Last Answer : (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law

Description : If dp is the equivalent diameter of a non-spherical particle, Vp its volume and sp its surface area, then its sphericity is φs is defined by (A) φs = 6 Vp /dpsp (B) φs = Vp /dpsp (C) φs = 6 dpSp /Vp (D) φs = dpSp /Vp

Last Answer : (A) φs = 6 Vp /dpsp

Description : Sphericity for a non-spherical particle is given by (where, V and S are volume and surface area respectively of one particle. and, D = equivalent diameter of particle). (A) 6.V/D.S (B) V/6D.S (C) D.S/V (D) V/D.S

Last Answer : (B) V/6D.S (C) D.S/V (D) V/D.S

Description : Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates ... (except the first one) is involved in each of the evaporation process (D) None of these

Last Answer : (B) There is no dynamic equilibrium between successive layer

Description : Coulter counter is used in determination of (A) particle surface area (B) particle size (C) particle volume (D)all of A, B, C

Last Answer : (D)all of A, B, C

Description : PROBLEM FA sample of soft saturated clay weighs 350 grams and has a volume of 205cc. After oven drying, the soil weighs 225 grams. Calculate the values of saturated unit weight, void ratio, porosity and specific gravity?

Last Answer : {

Description : The whole surface area of a rectangular block is 1300 cm2. Find its volume, if their dimensions are in the ratio of 4 : 3 : 2. -Maths 9th

Last Answer : Let the length, breadth and height of the rectangular box be 4x, 3x and 2x, respectively. ∵ Total surface area = 1300 cm2 2(4x × 3x + 3x × 2x + 4x × 2x) = 1300 52x2 =1300x2 = 25x = 5 ∴ Volume of rectangular box = 4x × 3x × 2x = 24(5)2 = 3000 cm3

Description : If the ratio of curved surface area and total surface area of a cylinder is 1 : 3, then find the volume of cylinder when the height is 2 cm. -Maths 9th

Last Answer : Let the radius and height of the cylinder be r and h, respectively . Given that, Curved surface area / Total surface area = 1/3 ⇒ 2πrh / 2πr(h + r) = 1/3 ⇒ 3h = h + r ⇒ r = 2h = 4cm ∴ volume of cylinder πr2h = π × (4)2 × 2 = 32π cm3

Description : The whole surface area of a rectangular block is 1300 cm2. Find its volume, if their dimensions are in the ratio of 4 : 3 : 2. -Maths 9th

Last Answer : Let the length, breadth and height of the rectangular box be 4x, 3x and 2x, respectively. ∵ Total surface area = 1300 cm2 2(4x × 3x + 3x × 2x + 4x × 2x) = 1300 52x2 =1300x2 = 25x = 5 ∴ Volume of rectangular box = 4x × 3x × 2x = 24(5)2 = 3000 cm3

Description : If the ratio of curved surface area and total surface area of a cylinder is 1 : 3, then find the volume of cylinder when the height is 2 cm. -Maths 9th

Last Answer : Let the radius and height of the cylinder be r and h, respectively . Given that, Curved surface area / Total surface area = 1/3 ⇒ 2πrh / 2πr(h + r) = 1/3 ⇒ 3h = h + r ⇒ r = 2h = 4cm ∴ volume of cylinder πr2h = π × (4)2 × 2 = 32π cm3

Description : Find the ratio of surface area and volume of the sphere of unit radius. -Maths 9th

Last Answer : Required ratio = 4πr2 / 4/3.πr3 = 3 x 4 x π x (1)2 / 4 x π x (1)3 = 3/1 (Since, r = 1) i.e., 3 : 1

Description : A sphere and a cube have the same surface area. What is the ratio of the square of volume of the sphere to the square of volume of the cube ? -Maths 9th

Last Answer : answer:

Description : What happens to a cell's ratio of surface area to volume as the volume increases more rapidly than its surface area?

Last Answer : The cell's ratio of surface area to volume would decrease if itsvolume increases more rapidly than its surface area.

Description : What does low surface area to volume ratio do?

Last Answer : Reduces evaporation

Description : What is the ratio of surface area to volume for a sphere with the following measurements surface area equals 588 M squared volume equals 1372 m to the Third?

Last Answer : The ratio appears to be 588 to 1372 or 3 to 7 in its simplest form

Description : What is cell surface area to volume ratio?

Last Answer : IDK quite

Description : A high surface area to volume ratio in cells is important because it (a) Enables efficient transfer of wastes, nutrients and gases across the cell membrane (b) Prevents overproduction of cell ... self and non-self (d) Provides for better structural support to cope with external physical pressure

Last Answer : Ans:(a)

Description : In Biot number, the characteristic length used is the ratio of the __________ of the solid. (A) Volume to surface area (B) Perimeter to surface area (C) Surface area to volume (D) Surface area to perimeter

Last Answer : (A) Volume to surface area

Description : Rate of low temperature oxidation of coal due to bad storage conditions (A) Decreases with increase in surface area (B) Does not vary with increase in surface area (C) Is more for low volatile ... to high volatile coal (D) Is accelerated by storage in large heaps with small surface to volume ratio

Last Answer : (D) Is accelerated by storage in large heaps with small surface to volume ratio

Description : Which of the following may account for the small size of the cells? A- .The rate of diffusion B- The surface area/volume ratio C- The number of mRNAs that can be produced by the nucleus D- All of the above

Last Answer : All of the above

Description : A n `alpha`-particle of velocity `1.6xx10^(7) m s^(-1)` approaches a gold nucleii `(Z=79)`. Calculate the distance of closest approach. Mas of an `alp

Last Answer : A n `alpha`-particle of velocity `1.6xx10^(7) m s^(-1)` approaches a gold nucleii `(Z=79)`. Calculate ... of an `alpha`-particle `=6.6xx10^(-27) kg`.

Description : Line integral is used to calculate a) Force b) Area c) Volume d) Length

Last Answer : d) Length

Description : If particle size is reduced then total surface area will be — a. Decreased b. Constant c. Increased d. None of these

Last Answer : c. Increased

Description : Does anyone know a mathematical formula to calculate the surface area of bubbles in a sink or bathtub of suds?

Last Answer : Too many variables when it comes to the size and quantity of the bubbles.

Description : A 4 cm cube is cut into 1 cm cubes. Calculate the total surface area of all the small cubes. -Maths 9th

Last Answer : Side of cube = 4 cm But cutting into 1 cm cubes, we get = 4 x 4 x 4 = 64 Now surface area of one cube = 6 x (1)² = 6 x 1=6 cm² and surface area of 64 cubes = 6 x 64 cm² = 384 cm²

Description : Calculate the surface area of a hemispherical dome of a temple with radius 14 m to be whitewashed from outside. -Maths 9th

Last Answer : Here, radius of hemispherical dome (r) = 14 m Surface area of dome = 2πr2 = 2 × 22 / 7 × 14 × 14 = 1232 m2 Hence , total surface area to be whitewashed from outside is 1232 m2

Description : Calculate the surface area of a hemispherical dome of a temple with radius 14 m to be whitewashed from outside. -Maths 9th

Last Answer : Here, radius of hemispherical dome (r) = 14 m Surface area of dome = 2πr2 = 2 × 22 / 7 × 14 × 14 = 1232 m2 Hence , total surface area to be whitewashed from outside is 1232 m2

Description : Calculate the illuminance at a surface distance 0.5m from a ligth source of luminous intensity 200 cd, assuming normal incidence. If the area of the s

Last Answer : Calculate the illuminance at a surface distance 0.5m from a ligth source of luminous intensity 200 cd, ... , what is the luminous flux on this area ?

Description : How do you calculate total surface area for aveoli in lungs?

Last Answer : Need answer

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : (2) Surface area of the bottom of the vessel Explanation: The pressure exerted by a static fluid depends only upon the depth of the fluid, the density of the fluid, and the acceleration of gravity. Static fluid pressure does not depend on the shape, total mass, or surface area of the liquid.

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : (2) Surface area of the bottom of the vessel Explanation: The pressure exerted by a static fluid depends only upon the depth of the fluid, the density of the fluid, and the acceleration of gravity.

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : Surface area of the bottom of the vessel

Description : The volume of a colloidal particle `V_C` as compared to the volume of a solute particle in a true solution `V_S` could be

Last Answer : The volume of a colloidal particle `V_C` as compared to the volume of a solute particle in a true solution `V_S` could ... `~ 10^(-3)` D. `~ 10^(3)`

Description : Number of particles in a crushed solid sample is given by (where, m = mass of particles in a sample, Vp = volume of one particle, ρ= density of particles) (A) m/ρ . Vp (B) m . ρ/Vp (C) m . Vp /ρ (D) Vp /m . ρ

Last Answer : (A) m/ρ . Vp

Description : Helium-mercury method can be used to determine the __________ of the catalyst particle. (A) Pore volume (B) Solid density (C) Porosity (D) All (A), (B), & (C)

Last Answer : (D) All (A), (B), & (C)

Description : For crushing of solids, the Rittinger's law states that the work required for crushing is proportional to (A) The new surface created (B) The size reduction ratio (C) The change in volume due to crushing (D) None of these

Last Answer : (A) The new surface created

Description : To avoid fire by spontaneous combustion of coal due to its low temperature oxidation, it should be stored in (A) Shallow and small piles (B) Fine sizes without the presence of any lump (C) Closed space without any ventilation facility (D) Large heaps with small surface to volume ratio

Last Answer : (A) Shallow and small piles

Description : Spontaneous combustion of coal on storage results due to (A) Inadequate ventilation (B) Low temperature oxidation (C) Storage in large heaps with small surface to volume ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Magnetron tuning by altering the surface-to-volume ratio of the hole portion of a hole-and-slot cavity is what type of tuning?

Last Answer : Inductive.

Description : How to calculate the volume of air in a compressed container?

Last Answer : answer:This is one of the handiest rules of thumb to know.: 22.4 liters of gas at STP (Standand Temperature and Pressure weighs it's molecular weight in grams. For example 22.4 liters of Oxygen weighs 32 grams 22.4 ... it 400 grams of (assume) propane C3H8 ( MW 44) is 22.4 x 400/44 = ~200 liters.

Description : Calculate the edge of the cube if its volume is 1331 cm3 -Maths 9th

Last Answer : Let the edge of the cube be a Volume of a cube = a×a×a 1331= a×a×a 11 =a ( as 1331 is the cube of 11 Therefore , Edge of a cube is 11 cm

Description : Calculate the edge of the cube if its volume is 1331 cm3 -Maths 9th

Last Answer : Let the edge of the cube be a Volume of a cube = a×a×a 1331= a×a×a 11 =a ( as 1331 is the cube of 11 Therefore , Edge of a cube is 11 cm

Description : A soccer ball is packaged in a cubic box with side lengths of 22 cm. Assuming that the ball touches all faces of the box, calculate what percentage of the volume of the box is wasted space Write it step by step pls?

Last Answer : one centimetre

Description : A soccer ball is packaged in a cubic box with side lengths of 22 cm. Assuming that the ball touches all faces of the box, calculate what percentage of the volume of the box is wasted space?

Last Answer : one centimetre

Description : For a reversible process at T = 300K, the volume is increased from `V_(i)=1L` to `V_(f)=10L`. Calculate `Delta H` if the process is isothermal -

Last Answer : For a reversible process at T = 300K, the volume is increased from `V_(i)=1L` to `V_(f)=10L`. Calculate `Delta H ... kJ B. 4.98 kJ C. 0 D. `-11.47 kJ`