Rittinger's crushing law states that
(A) Work required to form a particle of any size is proportional to the square
of the surface to volume ratio of the product
(B) Work required to form a particle of a particular size is proportional to the
square root of the surface to volume ratio of the product
(C) Work required in crushing is proportional to the new surface created
(D) For a given machine and feed, crushing efficiency is dependent on the
size of the feed & product

1 Answer

Answer :

(C) Work required in crushing is proportional to the new surface created

Related questions

Description : Bond crushing law (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law (B) Is less realistic in estimating the power requirements of commercial crushers ( ... (D) States that the work required for the crushing is proportional to the new surface created

Last Answer : (A) Calls for relatively less energy for the smaller product particles, than does the Rittinger law

Description : For crushing of solids, the Rittinger's law states that the work required for crushing is proportional to (A) The new surface created (B) The size reduction ratio (C) The change in volume due to crushing (D) None of these

Last Answer : (A) The new surface created

Description : . Which of the following equations is Rittinger's crushing law? (Where P = power required by the machine, m = feed rate, k = a constant, Ds̅a & D̅sb = volume surface mean diameter of feed & product respectively.) (A) P/m = K/ ... K . ln D̅sa /D̅sb (C) P/m = K . (1/ D̅sb - 1/Ds̅a ) (D) None of these

Last Answer : (C) P/m = K . (1/ D̅sb - 1/Ds̅a )

Description : According to Bond crushing law, the work required to form particle of size 'D' from very large feed is (where (S/V)p and (S/V) f are surface to volume ratio of the product and feed respectively). (A) (S/V)p (B) √(S/V)p (C) (S/V) 2 p (D) (S/V) f

Last Answer : (B) √(S/V)

Description : Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will ... Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Last Answer : (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing

Description : The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Description : Which of the following gives the crushing energy required to create new surface ? (A) Taggarts rule (B) Fick's law (C) Rittinger's Law (D) None of these

Last Answer : (C) Rittinger's Law

Description : Crushing efficiency is the ratio of the (A) Surface energy created by crushing to the energy absorbed by the solid (B) Energy absorbed by the solid to that fed to the machine (C) Energy ... surface energy created by crushing (D) Energy absorbed by the solid to the surface energy created by crushing

Last Answer : (A) Surface energy created by crushing to the energy absorbed by the solid

Description : Energy consumption in a crusher decreases with increase in the (A) Size of the product (at constant feed size) (B) Capacity of the crushing machine (C) Size of feed (at constant reduction ratio) (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not ... ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Last Answer : (C) Both the rolls run necessarily at the same speed

Description : Which of the following crushing laws is most accurately applicable to the fine grinding of materials? (A) Bond's crushing law (B) Kick's law (C) Rittinger's law (D) None of these

Last Answer : (C) Rittinger's law

Description : Pick out the wrong statement: (A) Magnetic separation method can be employed to treat both dry & wet ores (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed ... ) Gyratory crusher is used for coarse crushing (D) Screens are of stationary, moving and vibratory types

Last Answer : (B) Reduction ratio in crushing operation is defined as the ratio of minimum feed size to the maximum product size

Description : The terminal velocity of a solid spherical particle falling through a stationary fluid mass in the Stoke's law range is proportional to the (A) Inverse of fluid viscosity (B) Square of particle size (C) Difference in the densities of the particle & fluid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Which of the following gives the work required for size reduction of coal to -200 mesh in a ball mill most accurately? (A) Rittinger's law (B) Kick's law (C) Bond's law (D) None of these

Last Answer : (A) Rittinger's law

Description : In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Last Answer : (B) Inversely proportional to

Description : Rittinger's number designates the new surface created per unit mechanical energy absorbed by the material being crushed. Larger value of Rittinger's number of a material indicates its (A) Easier grindability (B) Poor grindability (C) High power consumption in grinding (D) None of these

Last Answer : (A) Easier grindability

Description : General crushing equation is given by d(P/m) = -K (dD̅S /D̅ n S ). Bond's crushing law is obtained by solving this equation for n = __________ and feed of infinite size. (A) 1 (B) 1.5 (C) 2 (D) 2.5

Last Answer : (B) 1.5

Description : Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement ... per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Last Answer : (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b )

Description : In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : In a size reduction crushing operation, the feed size is 10 to 50 mm, while the product size is 2 to 10 mm. This is a case of __________ crushing. (A) Primary (B) Secondary (C) Fine

Last Answer : (C) Fine

Description : In a size reduction crushing operation, feed size is 100 to 300 mm. while the product size is 10 to 50 mm. This is a case of the __________ crushing. (A) Primary (B) Secondary (C) Fine (D) Ultrafine

Last Answer : (B) Secondary

Description : In a size reduction crushing operation, feed size is 300 to 1500 mm while the product size is 100 to 300 mm. This is a case of the __________ crushing. (A) Secondary (B) Fine (C) Primary (D) Ultrafine

Last Answer : (C) Primary

Description : Angle of nip of the crushing rolls does not depend upon the (A) Diameter of the rolls (B) Speed of the rolls (C) Product size (D) Feed size

Last Answer : (B) Speed of the rolls

Description : Boyle's law states that A. pressure of a gas is inversely proportional to its volume i.e. P V = constant B. pressure of a gas is directly proportional to its volume i.e. P⁄V = constant C. ... of a gas is directly proportional to the square of its volume i.e. P ⁄ V² = constant

Last Answer : pressure of a gas is inversely proportional to its volume i.e. P × V = constant

Description : Flow rates of particular nozzle is directly proportional to a. square root of pressure b. orifice area c. Both (a) and (B) d. none of the above

Last Answer : c. Both (a) and (B)

Description : As per Gilliland's equation, the diffusivity is (A) Directly proportional to 'T 1.5 ' (B) Inversely proportional to 'P' (C) Dependent on the molecular volume & molecular weight of components (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Description : . Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Last Answer : (A) kW. sec/kg

Description : Crushing efficiency of a machine ranges between __________ percent. (A) 0.1 to 2 (B) 5 to 10 (C) 20 to 25

Last Answer : (A) 0.1 to 2

Description : In Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass varies as the __________ of its diameter. (A) Inverse (B) Square root (C) Second power (D) First power

Last Answer : (B) Square root

Description : Hooke's law states that A. the extension is proportional to the load when the elastic limit is not exceeded B. the extension is inversely proportional to the load when the elastic limit is not ... is independent of the load when the elastic limit is not exceeded D. load is dependent on extension

Last Answer : the extension is proportional to the load when the elastic limit is not exceeded

Description : During size reduction by a jaw crusher, the energy consumed decreases with the (A) Decreasing size of product at constant size of feed (B) Decreasing machine capacity (C) Increasing size of feed at constant reduction ratio (D) None of these

Last Answer : (C) Increasing size of feed at constant reduction ratio

Description : Fick's law relates to (A) Energy consumption (B) Final particle size (C) Feed size (D) None of these

Last Answer : (A) Energy consumption

Description : Volumetric efficiency of a compressor without clearance volume A. Increases with increase in compression ratio B. Decreases wit increase in compression ratio C. Not dependent upon compression ratio D. Unpredictable

Last Answer : ANSWER : C

Description : Assertion A: Large size stones are required in stone revetment in shore protection. Reason R: Resistance of stone to wave force is proportional to its volume and wave force is proportional to the exposed area of the stone. ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is the correct explanation of A

Description : Half the angle of nip, (α), for a roll crusher is given by (where, dr, dp and df are diameters of crushing rolls, feed particles and rolls gap respectively). (A) cos α = (dr + dp)/(dr + df) (B) cos α = (dr + df)/(dr + dp) (C) tan α = (dr + dp)/(dr + df) (D) sin α = (dr + dp)/(dr + df)

Last Answer : (A) cos α = (dr + dp)/(dr + df)

Description : For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (B) Diffusion through ash layer

Description : The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number

Last Answer : (D) Dependent on the Reynolds number

Description : For a non-spherical particle, the sphericity (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle (B) Has ... of volume of a sphere having the same surface area as the particle to the actual volume of the particle

Last Answer : (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle

Description : . Equivalent diameter of a particle is the diameter of the sphere having the same (A) Ratio of surface to volume as the actual volume (B) Ratio of volume to surface as the particle (C) Volume as the particle (D) None of these

Last Answer : (A) Ratio of surface to volume as the actual volume

Description : Sphericity is the ratio of the surface area of a spherical particle having the same volume as the particle to the surface area of the particle. Which of the following has the maximum value of sphericity? (A) Sphere (B) Cube (C) Cylinder (L/D = 1) (D) Raschig rings

Last Answer : (A) Sphere

Description : Pick out the wrong statement. (A) The equivalent stiffness of two springs (of equal stiffness 'S') in series is S/2 while in parallel is 2S (B) For a helical spring, deflection is ... is less than the buckling load (D) Modulus of resilience is proportional to (stress at elastic limit)2

Last Answer : (C) Crushing load or columns is less than the buckling load

Description : The acceleration of a particular body is directly proportional to the resultant force acting on it & inversely proportional to its mass.  a. Pascal's Law  b. Joule's Law  c. Newton's Law  d. None of the above

Last Answer : Newton's Law

Description : Kepler's law of planetary motion states that the square of the time period is proportional to the – (1) semi-major axis (2) square of the semi-major axis (3) cube of the semi-major axis (4) fourth power of the serni-major axis

Last Answer : (3) cube of the semi-major axis Explanation: Kepler's law of planetary motion states that the square of the time period is proportional to the cube of the semi-major axis.

Description : Kepler’s law of planetary motion states that the square of the time period is proportional to the (1) semi-major axis (2) square of the semi-major axis (3) cube of the semi-major axis (4) fourth power of the semi-major axis

Last Answer : cube of the semi-major axis

Description : The specific surface of spherical particles is proportional to (where, Dp = diameter of particle). (A) D2 p (B) Dp (C) 1/Dp (D) 1/D2p

Last Answer : (C) 1/Dp

Description : Solidification time of a molten metal in a casting is proportional to (where, V = volume of metal & A = its surface area; in the casting) (A) V/A (B) V/A2 (C) V2/A (D) V2/A2

Last Answer : (D) V2/A2

Description : The resistance offered by the filter used in a bag filter is proportional to (where, c = dust concentration, and s = particle size). (A) c/s (B) s/c (C) s . c (D) 1/s . c

Last Answer : (A) c/s

Description : According to Newton's law of universal gravitation, any two particles of finite mass attract one another with a force which is A. Inversely proportional to the product of their masses and ... the product of their masses and inversely proportional to the square of their distance apart

Last Answer : Directly proportional to the product of their masses and inversely proportional to the square of their distance apart

Description : During decarburising of a plain carbon steel, the thickness of ferrite layer growth is proportional to (A) Time (B) Square root of time (C) Square of time (D) Cube of time

Last Answer : Option B

Description : Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the ... the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Last Answer : (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow