Explain the theory of pure torsion.

Explain the theory of pure torsion.
by

1 Answer

Answer :

A shaft is a rotating part of machine which transmits power from one point to other. When a force acts tangentially at a point on the surface of the shaft it rotates or twist. The twisting is due to the moment of a tangential force at the axis of rotation. The shaft is said to be in torsion.

The study of behavior of the shaft in torsion without taking into account bending moment due to self-weight or other longitudinal forces known as pure torsion.

Due to torsion shearing stress are induced in the material of the shaft. Every point in the material of the shaft is subjected to pure shear. 

Torsional Equation is  image  

image

by

Related questions

State and explain perpendicular axis theorem of moment of Inertia.

Description : State and explain perpendicular axis theorem of moment of Inertia.

Last Answer : Perpendicular axis theorem: It states MI of a plane lamina about an axis perpendicular to the plane of lamina and passing through the centroid of the lamina is equal to the addition of the moments of ... OY are mutually perpendicular and OZ is the axis perpendicular to plane XY of the lamina.

Define the core of a section.

Description : Define the core of a section.

Last Answer : The centrally located portion of a within which the load must act so as to produce only compressive stress is called a core of the section.

State the condition for no tension at the base of a column.

Description : State the condition for no tension at the base of a column.

Last Answer : If the load acting in the middle third area or core of the section, then the material experiences only compressive stress without producing tensile stress. i.e. Direct stress is equal to bending stress. Minimum stress is zero, such condition is said to be no tension condition.  

Define section modulus and neutral axis.

Description : Define section modulus and neutral axis.

Last Answer : Section Modulus: It is the ratio of M. I. of the section about the neutral axis and the distance of the most extreme fiber from the neutral axis. Neutral Axis: It is the axis shown in cross ... The intersection of the neutral layer with any normal cross section of a beam is called as neutral axis.

Define point of contra-flexure of a loaded beam with sketch.

Description : Define point of contra-flexure of a loaded beam with sketch.

Last Answer : Point of Contra-flexure: It is the point in bending moment diagram where bending moment changes its sign from positive to negative and vice versa. At that point bending moment is equal to zero. This point is called as point of contra-flexure.

Draw stress-strain diagram for mild-steel rod and show different limits on it.

Description : Draw stress-strain diagram for mild-steel rod and show different limits on it. 

Last Answer : Where, A = Limit of proportionality B = Elastic limit C = Upper yield point D = Lower yield point E = Ultimate load point F = Breaking point

State the relation between Young’s modulus and bulk modulus.

Description : State the relation between Young’s modulus and bulk modulus. 

Last Answer : E = 3K(1 - 2 µ ) Where, E= Young’s Modulus  K= Bulk Modulus  µ= Poisson’s Ratio

Define: (i) Moment of Inertia (ii) Radius of Gyration

Description : Define: (i) Moment of Inertia (ii) Radius of Gyration

Last Answer : i) Moment of Inertia: Moment of Inertia of a body about any axis is equal to the product of the area of the body and square of the distance of its centroid from that axis.  OR  Moment of ... at which the entire area is assumed to be concentrated without changing the M. I. about the given axis. 

The following assumption is not true in the theory of pure torsion: (A) The twist along the shaft is uniform (B) The shaft is of uniform circular section throughout (C) Cross-section of the shaft, which is plane before twist remains plane after twist (D) All radii get twisted due to torsion

Description : The following assumption is not true in the theory of pure torsion:  (A) The twist along the shaft is uniform  (B) The shaft is of uniform circular section throughout  (C) Cross- ... , which is plane before twist remains plane after twist  (D) All radii get twisted due to torsion 

Last Answer : (D) All radii get twisted due to torsion 

A shaft a. Is always subjected to pure torsion b. Combination of M & T but no end thrust c. Combination of torque & end thrust but no bending moment d. May be subjected to a combination of M, T and end thrust

Description : A shaft a. Is always subjected to pure torsion b. Combination of M & T but no end thrust c. Combination of torque & end thrust but no bending moment d. May be subjected to a combination of M, T and end thrust

Last Answer : d. May be subjected to a combination of M, T and end thrust

A shaft is said to be in pure torsion if a. Turning moment is applied at one end and other end is free b. Turning force is applied at one end and other end is free c. Two opposite turning moments are applied to the shaft d. Combination of torsional load and bending load is applied to the shaft

Description : A shaft is said to be in pure torsion if a. Turning moment is applied at one end and other end is free b. Turning force is applied at one end and other end is free c. Two opposite turning moments are applied to the shaft d. Combination of torsional load and bending load is applied to the shaft

Last Answer : c. Two opposite turning moments are applied to the shaft

Which of the following assumptions are made in torsion theory? a. Shaft is perfectly straight b. Material of the shaft is heterogeneous c. Twist cannot be uniform along the length of the shaft d. Shaft is perfectly curve

Description : Which of the following assumptions are made in torsion theory? a. Shaft is perfectly straight b. Material of the shaft is heterogeneous c. Twist cannot be uniform along the length of the shaft d. Shaft is perfectly curve v

Last Answer : a. Shaft is perfectly straight b. Material of the shaft is heterogeneous

In a torsion pendulum a.The body attached to the lower end of wire or rod must be elastic b.The clamp must be elastic c.The clamp must be elastic d.(A) and (B) above e.(A), (B) and (C) together

Description : In a torsion pendulum a.The body attached to the lower end of wire or rod must be elastic b.The clamp must be elastic c.The clamp must be elastic d.(A) and (B) above e.(A), (B) and (C) together

Last Answer : c. The clamp must be elastic

what is bloat/gastric torsion in dogs?

Description : content:

Last Answer : Another name for bloat/gastric torsion is gastric dilation-volvulus (GDV). It occurs when the stomach twist trapping air and gases and blocking them from escaping. THIS IS A MEDICAL ... REQUIRING IMMEDIATE SURGERY. Please see our article "Stomach Torsion and Bloat" for further information.

Where does the torsion spring connect on an Ariens RM1028E riding mower?

Description : Where does the torsion spring connect on an Ariens RM1028E riding mower?

Last Answer : Need Answer

Torsion bar suspension?

Description : Torsion bar suspension?

Last Answer : A torsion bar suspension is nothing but a suspension that uses a torsion bar to bear the weight of a vehicle instead of using conventional suspension springs. These kind of suspension are usually used in people mover caravans, MUVs, military vehicles etc.

Which of the following mollusc is formed by a larvae which have torsion

Description : Which of the following mollusc is formed by a larvae which have torsion

Last Answer : Which of the following mollusc is formed by a larvae which have torsion A. Lamelledes B. Pila C. Sepia D. Octopus

What is the torsion constant of a victor mousetrap?

Description : What is the torsion constant of a victor mousetrap?

Last Answer : Need answer

Testicular torsion repair - series?

Description : Testicular torsion repair - series?

Last Answer : Normal anatomyThe testicles are suspended in the scrotal sac.IndicationsTesticular torsion occurs when the testicle, normally attached to the scrotum by a small ligament at its base, becomes loose. The testicle can then ... Also reviewed by David Zieve, MD, MHA, Medical Director, A.D.A.M., Inc.

Fatigue failure of a material may occur, when it is subjected to __________ stress. (A) Fluctuating(B) Tensile(C) Compressive(D) Torsion

Description : Fatigue failure of a material may occur, when it is subjected to __________ stress. (A) Fluctuating (B) Tensile (C) Compressive (D) Torsion

Last Answer : (A) Fluctuating

Helical torsion spring is used in (A) door hinges (B) door closers (C) automobile starters (D) all of the above

Description : Helical torsion spring is used in (A) door hinges (B) door closers (C) automobile starters (D) all of the above

Last Answer : (D) all of the above

The type of spring used to absorb and release energy in mechanical watches is (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Helical torsion spring

Description : The type of spring used to absorb and release energy in mechanical watches is (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Helical torsion spring

Last Answer : (C) Spiral spring

The type of spring used in vehicle clutches is, (A) Helical compression spring (B) Belleville spring (C) Both (A) and (B) (D) Helical torsion spring

Description : The type of spring used in vehicle clutches is, (A) Helical compression spring (B) Belleville spring (C) Both (A) and (B) (D) Helical torsion spring

Last Answer : (C) Both (A) and (B)

When the helical torsion spring is subjected to torque, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Description : When the helical torsion spring is subjected to torque, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Last Answer : (C) Bending stress

The type of spring used in door hinges is, (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Helical torsion spring

Description : The type of spring used in door hinges is, (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Helical torsion spring

Last Answer : (D) Helical torsion spring

The type of spring used to achieve any linear or non-linear load-deflection characteristic is (A) Spiral spring (B) Non-ferrous spring (C) Belleville (coned disk) spring (D) Torsion spring

Description : The type of spring used to achieve any linear or non-linear load-deflection characteristic is (A) Spiral spring (B) Non-ferrous spring (C) Belleville (coned disk) spring (D) Torsion spring

Last Answer : (C) Belleville (coned disk) spring

For a helical torsion sprig, the stress concentration factor at outer fibre is? Give spring index=5. a) 0.78 b) 0.87 c) 1.87 d) 0.69

Description : For a helical torsion sprig, the stress concentration factor at outer fibre is? Give spring index=5. a) 0.78 b) 0.87 c) 1.87 d) 0.69

Last Answer : b) 0.87

For a helical torsion sprig, the stress concentration factor at inner fibre is? Give spring index=5. a) 1.005 b) 1.175 c) 1.223 d) 1.545

Description : For a helical torsion sprig, the stress concentration factor at inner fibre is? Give spring index=5. a) 1.005 b) 1.175 c) 1.223 d) 1.545

Last Answer : b) 1.175

The helical spring ad wire of helical torsion spring, both are subjected to torsional shear stresses. a) True b) False

Description : The helical spring ad wire of helical torsion spring, both are subjected to torsional shear stresses. a) True b) False

Last Answer : b) False

Transverse fillet welds are under (i) Bending and shear stresses (ii)Compressive and torsion shear stresses (iii)Tensile and compressive stresses (iv)None

Description : Transverse fillet welds are under (i) Bending and shear stresses (ii)Compressive and torsion shear stresses (iii)Tensile and compressive stresses (iv)None

Last Answer : (iv)None

Parallel fillet welds are under  Shear and bending stresses  Compressive and torsion shear stresses  Tensile and compressive stresses  None

Description : Parallel fillet welds are under  Shear and bending stresses  Compressive and torsion shear stresses  Tensile and compressive stresses  None

Last Answer :  None

Flexible shafts have _______ rigidity in torsion making them flexible. a) Low b) High c) Very high d) Infinitely small

Description : Flexible shafts have _______ rigidity in torsion making them flexible. a) Low b) High c) Very high d) Infinitely small

Last Answer : b) High

Magnification factor is the ratio of the maximum displacement due to forced vibrations to the deflection due to _______ A Static force B Dynamic force C Torsion D Compression

Description : Magnification factor is the ratio of the maximum displacement due to forced vibrations to the deflection due to _______ A Static force B Dynamic force C Torsion D Compression

Last Answer : A Static force

Magnification factor is the ratio of the maximum displacement due to forced vibrations to the deflection due to _______ a) Static force b) Dynamic force c) Torsion d) Compression

Description : Magnification factor is the ratio of the maximum displacement due to forced vibrations to the deflection due to _______ a) Static force b) Dynamic force c) Torsion d) Compression

Last Answer : a) Static force

Pick up the correct statement from the following: (A) Mcg = M M 2 + r2 ) where letters carry their usual meanings (B) Tcp = m 2 + T2 )where letters carry their usual meanings (C) The torque which when acting alone would produce maximum shear stress equal to the maximum shear stress caused by the combined bending and torsion, is called equivalent torque (D) All the above

Description : Pick up the correct statement from the following:  (A) Mcg = M M 2  + r2 ) where letters carry their usual meanings  (B) Tcp = m 2  + T2 )where ... maximum shear stress caused by the combined bending and torsion, is called equivalent  torque  (D) All the above 

Last Answer : (D) All the above 

The ratio of strengths of solid to hollow shafts, both having outside diameter D and hollow having inside diameter D/2, in torsion, is (A) 1/4 (B) 1/2 (C) 1/16 (D) 15/15

Description : The ratio of strengths of solid to hollow shafts, both having outside diameter D and hollow having  inside diameter D/2, in torsion, is  (A) 1/4  (B) 1/2  (C) 1/16  (D) 15/15 

Last Answer : (D) 15/15 

Suitability of steel for its use in cable is judged by its strength in (A) Tension (B) Compression (C) Torsion (D) Shear

Description : Suitability of steel for its use in cable is judged by its strength in (A) Tension (B) Compression (C) Torsion (D) Shear

Last Answer : (A) Tension

. __________ test can be termed as the semi-destructive test. (A) Impact (B) Torsion (C) Hardness (D) Charpy

Description : . __________ test can be termed as the semi-destructive test. (A) Impact (B) Torsion (C) Hardness (D) Charpy

Last Answer : Option C

In a ring beam subjected to uniformly distributed load (i) Shear force at mid span is zero (ii) Shear force at mid span is maximum (iii) Torsion at mid span is zero (iv) Torsion at mid span is maximum The correct answer is (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Description : In a ring beam subjected to uniformly distributed load (i) Shear force at mid span is zero (ii) Shear force at mid span is maximum (iii) Torsion at mid span is zero (iv) Torsion at mid span is maximum The correct answer ... and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv)

Last Answer : Option A

A beam curved in plan is designed for (A) Bending moment and shear (B) Bending moment and torsion (C) Shear and torsion (D) Bending moment, shear and torsion

Description : A beam curved in plan is designed for (A) Bending moment and shear (B) Bending moment and torsion (C) Shear and torsion (D) Bending moment, shear and torsion

Last Answer : Answer: Option D

Write The Torsion Equation?

Description : Write The Torsion Equation?

Last Answer : The torsional equation is, T/J = q/r = GӨ/L Where, T - Torsional moment (T is in N-mm) J - Polar moment of inertia (J is in mm⁴) q - Shear stress in the element (q is in N/mm²) r - Distance of element from ... (G is in N/mm²) Ө - Angle of twist (Ө is in radians) L - Length of the shaft (L is in mm)

In prestressed concrete members, the shear force depends upon (a) Distributed load (b) Torsion (c) Concentrated load (d) Variation in net bending moment

Description : In prestressed concrete members, the shear force depends upon (a) Distributed load (b) Torsion (c) Concentrated load (d) Variation in net bending moment

Last Answer : (d) Variation in net bending moment

Which of the following steel sections should preferably be used at places where torsion occurs? (a) Box-type section (b) Channel section (c) Angle section (d) Any of the above

Description : Which of the following steel sections should preferably be used at places where torsion occurs? (a) Box-type section (b) Channel section (c) Angle section (d) Any of the above

Last Answer : (a) Box-type section

The torsion resisting capacity of a given reinforced concrete section. (a) Decreases with decrease in stirrups spacing. (b) Decreases with increase in longitudinal bars. (c) Does not depend upon stirrups and longitudinal steels. (d) Increases with increase in stirrups and longitudinal steels.

Description : The torsion resisting capacity of a given reinforced concrete section. (a) Decreases with decrease in stirrups spacing. (b) Decreases with increase in longitudinal bars. (c) Does not depend upon stirrups and longitudinal steels. (d) Increases with increase in stirrups and longitudinal steels.

Last Answer : (d) Increases with increase in stirrups and longitudinal steels.

The size of the mesh at each corner meant for torsion reinforcement in a rectangular slab of size (Lx ´ Ly) is Lx = shorter span Lx = Longer span [ A ] 0.1 Ly x 1 Ly [ B ] 0.2 Ly x 0.2 Ly [ C ] 0.1 Lx x 0.1 Lx [ D ] 0.2 Lx x 0.2 Lx

Description : The size of the mesh at each corner meant for torsion reinforcement in a rectangular slab of size (Lx ´ Ly) is Lx = shorter span Lx = Longer span [ A ] 0.1 Ly x 1 Ly [ B ] 0.2 Ly x 0.2 Ly [ C ] 0.1 Lx x 0.1 Lx [ D ] 0.2 Lx x 0.2 Lx

Last Answer : [ D ] 0.2 Lx x 0.2 Lx

When a tooth is twisted along its long axis this is called: A. Mesio version B. Disto version C. Lingo version D. Torsion

Description : When a tooth is twisted along its long axis this is called: A. Mesio version B. Disto version C. Lingo version D. Torsion

Last Answer : D. Torsion

A large cystic ovarian tumour is detected in a woman on routine antenatal check up. The most common complication she can encounter is: a) Torsion. b) Rupture. c) Haemorrhage. d) Degeneration. e) Infection.

Description : A large cystic ovarian tumour is detected in a woman on routine antenatal check up. The most common complication she can encounter is: a) Torsion. b) Rupture. c) Haemorrhage. d) Degeneration. e) Infection.

Last Answer : a) Torsion.

The type of spring used to achieve any linear and non-linear load-deflection characteristics is (a)spiral spring (b) non-ferrous spring (c)Belleville spring (d) torsion spring

Description : The type of spring used to achieve any linear and non-linear load-deflection characteristics is (a)spiral spring (b) non-ferrous spring (c)Belleville spring (d) torsion spring

Last Answer : (c)Belleville spring

The material used for making torsion bar is (a) Steel (b) Cast iron (c) High carbon steel (d) All of the above

Description : The material used for making torsion bar is (a) Steel (b) Cast iron (c) High carbon steel (d) All of the above

Last Answer : (a) Steel

When a close-coiled helical spring is subjected to an axial load, it is said to be under. (a) Bending (b) Shear (c) Torsion (d) Crushing

Description : When a close-coiled helical spring is subjected to an axial load, it is said to be under. (a) Bending (b) Shear (c) Torsion (d) Crushing

Last Answer : (c) Torsion