What are the solutions for an overheating laptop?

What are the solutions for an overheating laptop?
by

1 Answer

Answer :

Make sure the fan inside the laptop is functioning properly and cleaned as this could be a cause for over heating. If that fails you should probably look into purchasing another laptop.
by

Related questions

Is this laptop overheating?

Description : Is this laptop overheating?

Last Answer : answer:I definitely concur that it is overheating, and at times dangerously so. While Intel CPUs may be more heat tolerant than those from AMD, still, when a CPU is averaging 76 (centigrade), or about ... especially if the case feels hot to the touch-that computer needs to be cooled down, and fast.

Is my HP computer laptop overheating?

Description : Is my HP computer laptop overheating?

Last Answer : How old is your computer? Have you installed anything recently? Have you dropped it, or sat on it, or exposed it to adverse conditions?

Is an overheating laptop a problem that can be fixed?

Description : Is an overheating laptop a problem that can be fixed?

Last Answer : Can you say more about this problem? Is it shutting down because it is overheating? Is something driving the CPU? Is it your graphics chipset? Is it just feeling hot to you? If so consider a good quality cooling pad from Amazon or someplace similar.

Any tips on how to stop your laptop from overheating?

Description : Any tips on how to stop your laptop from overheating?

Last Answer : What are you setting it on? If it is on you bed or something that won’t let it breathe, it is going to overheat. Also, look into a laptop stand that has fans for cooling it.

Laptop overheating

Description : I have an older laptop computer and when I'm working on it it's completely hot. Is there anything you can do about it?

Last Answer : I would try the cooling pads under the laptop. They have them in PC stores.

What is the best way to keep a laptop from overheating?

Description : What is the best way to keep a laptop from overheating?

Last Answer : Make sure your laptop is free from dust and that your fans are working properly. Put fan on your laptop.or use it in air condition.Do not put laptop on the bed and use it. Dust your laptop ... object like halve an inch under the notebook infront.The reason is to allow ample air to blow under it.

PS3 overheating when it isn't hot?

Description : PS3 overheating when it isn't hot?

Last Answer : It’s dirty. Clean the inside so that the fans and cooling fins can do their job.

Any ideas about why my car is overheating?

Description : Any ideas about why my car is overheating?

Last Answer : I had a similar issue recently on my Mazda B3000 truck. Turned out to be a fan clutch.

Can I use a can of compressed air to rid my Xbox 360 of overheating problems?

Description : Can I use a can of compressed air to rid my Xbox 360 of overheating problems?

Last Answer : answer:First off, have you called Microsoft? I've had friends get their boxes replaced. Its worth a shot. The best way would be to take it apart. That's really the only way you will get all ... out. Trying to blow it out with compressed air would just succeed in burying whatever is in there deeper.

My car is overheating and I have no heat - any ideas what's wrong?

Description : My car is overheating and I have no heat - any ideas what's wrong?

Last Answer : Your coolant is either low or leaking (cabin heat comes from blowing air across hot antifreeze in the heater core). Worst case scenario, your head gasket is blown. If your car isn't ... can warp and resurfacing is really expensive, let alone the labor involved in removing and reinstalling it.

Need help regarding my macbook overheating?

Description : Need help regarding my macbook overheating?

Last Answer : This is very simplistic but it helps, I bought a couple of those little plastic caps that go on the end of bar stools and raise the back of the lapbook up on those. I also bought a little usb ... laptop has to generate the power to run the fan to cool it??? Macbooks are notorious for running hot!

What can I do about my Chevrolet 4.3 v6 engine overheating?

Description : What can I do about my Chevrolet 4.3 v6 engine overheating?

Last Answer : answer:Overheating problems are usually fairly easy to diagnose and I would think if your dad is the owner of a 100 year old truck, he knows how to spin a wrench. I would assume he either didnt ... usually ID that if there is fluid leaking from the heads or the rad fluid is spotty or milky.

At what point should I worry about my iMac overheating?

Description : At what point should I worry about my iMac overheating?

Last Answer : Don’t worry about it. There’s a thermal safety shutdown in the firmware. Also, the newer Core Duo chips will happily run up to 80C without blinking. Have a cool drink and relax.

How long can a Playstation-2 go without overheating?

Description : How long can a Playstation-2 go without overheating?

Last Answer : Is it an early model? If not, you should just be able to leave it on. My nephews played theirs pretty constantly without problem.

Why is my car overheating?

Description : Why is my car overheating?

Last Answer : Maybe your temperature gauge is broken. Sorry to state the obvious but it might be.

What's wrong with my car? Overheating and no A/C?

Description : What's wrong with my car? Overheating and no A/C?

Last Answer : answer:Typically your air conditioning and your cooling systems are separate. It sounds to me like you have two different problems. I've never seen air conditioning go out that caused a cooling system problem. I ... , where is it going? If not, what part in the (engine) cooling system has gone bad?

What are the causes of smartphone overheating ?

Last Answer : See, if we talk about heating, then we have to say that every electronic device or machine is hot. For example, your car , computer, etc., everything is not prevented from getting hot. Water is ... -36 degrees Celsius. And if you use a smartphone in this temperature, it will heat up more quickly.

How do I protect my smartphone from overheating ?

Last Answer : You can't work more on a smartphone or play more games , but that's not the point. If you want to protect your smartphone from overheating, keep your phone's software updated. Many times ... which apps are taking up more space in the background. Identify those apps and temporarily shut them down.

What is the solution to a PC's overheating problem?

Description : What is the solution to a PC's overheating problem?

Last Answer : check if the fan is working or not avoid blocking the vent put less pressure on your Pc speed up fan speed Reapply thermal paste Clean up the Pc stop overclocking

How can I reduce the overheating problem in my Android phone?

Description : How can I reduce the overheating problem in my Android phone?

Last Answer : Sometimes extensive use of your phone could cause it to overheat. My phone is fairly new and it overheats at times as well, but if its a consistent problem try looking into purchasing another phone.

How do circuit breakers keep the wires in an electric circuit from overheating?

Description : How do circuit breakers keep the wires in an electric circuit from overheating?

Last Answer : They reduce the flow of electrons.

How do circuit breakers keep the wires in an electric circuit from overheating?

Description : How do circuit breakers keep the wires in an electric circuit from overheating?

Last Answer : They reduce the flow of electrons.

How can I keep my my motherboard from overheating?

Description : How can I keep my my motherboard from overheating?

Last Answer : Get a well ventilated case in a cool area with fans. Make sure heat sinks and fans are properly installed.

Are there overheating issues with certain computer cases?

Description : Are there overheating issues with certain computer cases?

Last Answer : You should bot use your computer in the case or have it one that will revent over heating.

By overheating the nutritional value of cereal proteins is (A) Increased (B) Decreased (C) Unchanged (D) None of these

Description : By overheating the nutritional value of cereal proteins is (A) Increased (B) Decreased (C) Unchanged (D) None of these

Last Answer : Answer : B

One of the purposes of sub-cooling the liquid refrigerant is to (a) reduce compressor overheating (b) reduce compressor discharge temperature (c) increase cooling effect (d) ensure that only liquid and not the vapour enters the expansion (throttling) valve

Description : One of the purposes of sub-cooling the liquid refrigerant is to (a) reduce compressor overheating (b) reduce compressor discharge temperature (c) increase cooling effect (d) ensure that only liquid and not the vapour enters the expansion (throttling) valve

Last Answer : Ans: d

If one cylinder of a diesel engine receives more fuel than others , then for that cylinder the A. exhaust will be smoky B. scavenging occurs C. exhaust temperature will be high D. engine starts overheating

Description : If one cylinder of a diesel engine receives more fuel than others , then for that cylinder the A. exhaust will be smoky B. scavenging occurs C. exhaust temperature will be high D. engine starts overheating

Last Answer : ANSWER : B

One should not connect a number of electrical appliances to the same power socket because 1. this can damage the appliances 2. this can damage the domestic wiring due to overheating 3. the appliances will not get full voltage Which of the above is/are valid reasons? (a) 2 and 3 (b) 2 only (c) 1 and 2 (d) 3 only

Description : One should not connect a number of electrical appliances to the same power socket because 1. this can damage the appliances 2. this can damage the domestic wiring due to overheating 3. the appliances will not get full voltage Which ... valid reasons? (a) 2 and 3 (b) 2 only (c) 1 and 2 (d) 3 only

Last Answer : Ans:(b)

Why does milk curdle? (a) Due to fermentation of lactose (b) Due to reaction of microbes (c) Due to overheating (d) Due to fungus growth

Description : Why does milk curdle? (a) Due to fermentation of lactose (b) Due to reaction of microbes (c) Due to overheating (d) Due to fungus growth

Last Answer : Ans:(a)

Coast Guard Regulations (46 CFR), require that an indicating light at the propulsion control station will operate if overloading or overheating occurs in a _______________. A. forced draft blower motor B. steering gear motor C. fuel pump motor D. condensate pump motor

Description : Coast Guard Regulations (46 CFR), require that an indicating light at the propulsion control station will operate if overloading or overheating occurs in a _______________. A. forced draft blower motor B. steering gear motor C. fuel pump motor D. condensate pump motor

Last Answer : Answer: B

Damp armature windings in a D.C. motor may lead to ____________. A. reduced voltage B. reduced current C. increased resistance D. overheating

Description : Damp armature windings in a D.C. motor may lead to ____________. A. reduced voltage B. reduced current C. increased resistance D. overheating

Last Answer : Answer: D

Electrical failures in motors are caused by the breakdown of insulation, which may be caused by _____________. A. penetration of moisture B. accumulation of dirt C. overheating D. all of the above

Description : Electrical failures in motors are caused by the breakdown of insulation, which may be caused by _____________. A. penetration of moisture B. accumulation of dirt C. overheating D. all of the above

Last Answer : Answer: D

A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray can of refrigerant approved for this purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Description : A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray ... purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Last Answer : Answer: B

Multiple grounds have developed and were initialy indicated by the grounddetecting system as one ground. The FIRST step in locating the grounds is to _____________. A. examine the main bus bars for signs of overheating B. eliminate the individual circuits one by one until the ground detecting system no longer indicates any grounds C. change over generators D. check each circuit with a megohmmeter

Description : Multiple grounds have developed and were initialy indicated by the grounddetecting system as one ground. The FIRST step in locating the grounds is to _____________. A. examine the main bus bars ... no longer indicates any grounds C. change over generators D. check each circuit with a megohmmeter

Last Answer : Answer: B

Discoloration of the rotor bars in a squirrel-cage motor is typical evidence of _____________. A. moisture B. overheating C. vibration D. all of the above

Description : Discoloration of the rotor bars in a squirrel-cage motor is typical evidence of _____________. A. moisture B. overheating C. vibration D. all of the above

Last Answer : Answer: B

During its operation, loud buzzing and resultant welding of contacts of a magnetic relay may be caused by __________. A. overheating of the contactor coil B. low voltage on the operating coil C. low insulation resistance to ground D. lubrication of the contact bearing points

Description : During its operation, loud buzzing and resultant welding of contacts of a magnetic relay may be caused by __________. A. overheating of the contactor coil B. low voltage on the operating coil C. low insulation resistance to ground D. lubrication of the contact bearing points

Last Answer : Answer: B

A circuit is protected from overheating by a/an ___________. A. pyrometer B. thermal overload relay C. magnetic contactor D. overload transformer

Description : A circuit is protected from overheating by a/an ___________. A. pyrometer B. thermal overload relay C. magnetic contactor D. overload transformer

Last Answer : Answer: B

Electrical circuits are protected against overheating by means of a/an ______________. A. circuit breaker B. amplifier C. diode D. capacitor

Description : Electrical circuits are protected against overheating by means of a/an ______________. A. circuit breaker B. amplifier C. diode D. capacitor

Last Answer : Answer: A

The purpose of an impressed current cathodic protection system aboard ship is to _______________. A. prevent corrosion of the hull, propeller, rudder and line shafting B. neutralize the vessel's stray magnetic fields which would interfere with radar C. protect engine room and deck machinery from oxidation in the presence of salt air D. maintain a minimum constant alternator load to prevent overheating

Description : The purpose of an impressed current cathodic protection system aboard ship is to _______________. A. prevent corrosion of the hull, propeller, rudder and line shafting B. neutralize the vessel's ... the presence of salt air D. maintain a minimum constant alternator load to prevent overheating

Last Answer : Answer: A

When charging lead-acid batteries, you should reduce the charging rate as the battery nears its full charge capacity to ______________. A. prevent excessive gassing and overheating B. allow equalization of cell voltages C. reduce lead sulfate deposits D. increase lead peroxide formation

Description : When charging lead-acid batteries, you should reduce the charging rate as the battery nears its full charge capacity to ______________. A. prevent excessive gassing and overheating B. allow equalization of cell voltages C. reduce lead sulfate deposits D. increase lead peroxide formation

Last Answer : Answer: A

Which of the damages listed can occur to the components of a winch master control switch, if the cover gasket becomes deteriorated? A. Overheating of the winch motor. B. Contamination of lube oil. C. Sparking at the winch motor brushes. D. Rapid corrosion of switch components.

Description : Which of the damages listed can occur to the components of a winch master control switch, if the cover gasket becomes deteriorated? A. Overheating of the winch motor. B. Contamination of lube oil. C. Sparking at the winch motor brushes. D. Rapid corrosion of switch components.

Last Answer : Answer: D

Electric propulsion coupling excitation is reduced at slow speeds to ___________. A. increase speed control B. increase shaft torque C. prevent coupling overheating D. prevent coupling slippage

Description : Electric propulsion coupling excitation is reduced at slow speeds to ___________. A. increase speed control B. increase shaft torque C. prevent coupling overheating D. prevent coupling slippage

Last Answer : Answer: C

Low water in boiler drum is unsafe because it may result in overheating of water tubes in furnace. Why it is unsafe to have high water condition in boiler drum ?

Description : Low water in boiler drum is unsafe because it may result in overheating of water tubes in furnace. Why it is unsafe to have high water condition in boiler drum ?

Last Answer : High drum level does not allow steam separation to be effective and some water can be carried over with steam which is not desirable for steam turbine.

Overheating of relay contacts or contact born out is due to (a) slow making and breaking of load circuit contacts (b) foreign matter on the contact surface (c) too low contact pressure (d) all of the above

Description : Overheating of relay contacts or contact born out is due to (a) slow making and breaking of load circuit contacts (b) foreign matter on the contact surface (c) too low contact pressure (d) all of the above

Last Answer : (d) all of the above

The most likely cause of brake fade is: a. Oil or grease on the brake drums b. Worn stators c. The pilot reducing the brake pressure d. The brake pads overheating

Description : The most likely cause of brake fade is: a. Oil or grease on the brake drums b. Worn stators c. The pilot reducing the brake pressure d. The brake pads overheating

Last Answer : d. The brake pads overheating

The most likely cause of brake fade is: a. Oil or grease on the brake drums b. Worn stators c. The pilot reducing the brake pressure d. The brake pads overheating

Description : The most likely cause of brake fade is: a. Oil or grease on the brake drums b. Worn stators c. The pilot reducing the brake pressure d. The brake pads overheating

Last Answer : d. The brake pads overheating

The contraction (Gaseous) porosity in inlays is related to:** A. Overheating of the alloy B. Molten gases C. Diameter of the sprue D. Overheating of investment

Description : The contraction (Gaseous) porosity in inlays is related to:** A. Overheating of the alloy B. Molten gases C. Diameter of the sprue D. Overheating of investment

Last Answer : B. Molten gases

An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Description : An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Last Answer : ANSWER: Z -- 200 OHMS

Overheating of relay contacts or contact born out is due to?

Last Answer : Overheating of relay contacts or contact born out is due to slow making and breaking of load circuit contacts, foreign matter on the contact surface, too low contact pressure.

Part of the transformer which is most subject to damage from overheating is?

Description : Part of the transformer which is most subject to damage from overheating is?

Last Answer : Part of the transformer which is most subject to damage from overheating is winding insulation.