List any four equipment used in drying.

List any four equipment used in drying.
by

1 Answer

Answer :

Equipment used for drying: i) Tray dryer ii) Tunnel dryer iii) Rotary dryer iv) Fluidized Bed Dryer v)Vacuum dryer vi) Freeze dryer.
by

Related questions

Define drying. Give application of drying in pharmacy.

Description : Define drying. Give application of drying in pharmacy.

Last Answer : Definition:  Drying: It is defined as final removal of liquid from solid by vaporization with aid of heat. Application:  1) In pharmaceutical industry it is used as a unit process in the ... of product, when powder is dried it gets solublised fast. 7) Drying ensures free flowing of powders.

Explain The theory of freeze drying and state its application.

Description : Explain The theory of freeze drying and state its application.

Last Answer : Theory:-  i) In this process, the material is frozen in a suitable container connected to a high vacuum system, so that the vapour pressure of water vapours is ... antibiotics, blood products, vaccines, enzymes preparation, microbiological cultures & other thermo labile pharmaceutical substances.

Explain principle of freeze drying. Give its advantages.

Description : Explain principle of freeze drying. Give its advantages.

Last Answer : Principle:  i. The material is frozen in a suitable container connected to a high vacuum system, so that the vapour pressure of water is reduced to less than that of material being dried. ii. ... it is properly sealed in an inert atmosphere. vii. The sterility of the product can be maintained. 

Define Drying .What are different factors affecting to the rate of drying?

Description : Define Drying .What are different factors affecting to the rate of drying?

Last Answer : Definition: Final removal of liquid from the solid with the help of heat is called drying. Factor affecting the rate of drying: Following factor can affect the rate of drying: 1) Surface area of ... (Hs-Hg) between surface layer and atmospheric: if difference is more rate of drying will be fast.

Give application of freeze drying.

Description : Give application of freeze drying.

Last Answer : (i) The process is mainly used for drying of biological products such as antibiotics, blood products, vaccines ,enzymes preparation, microbiological cultures etc. (ii) The heat sensitive material can be dried

Discuss the theory, construction, and working of freeze drying apparatus

Description : Discuss the theory, construction, and working of freeze drying apparatus

Last Answer : Theory: Freeze drying or sublimation drying consists of simply reducing the temperature & pressure to values below the triple point .(4.579mm of Hg& temp. of 0.0099 c) Under these ... . 5. Packing: Biological products are dried packed in aseptic condition immediately after drying.

Discuss in brief Freeze drying.

Description : Discuss in brief Freeze drying.

Last Answer : Principle:  The material is frozen in a suitable container connected to a high vacuum system, so that the vapour pressure of water is reduced to less than that of material being dried. Thus, it ... special precautions. 3. The period of drying is quite long.(usually not less than 10 hours)  

Write the applications of drying.

Description : Write the applications of drying.

Last Answer : i. It is used in manufacturing of granules. ii. It reduces the bulk and weight of the material. iii. It helps in preservation of crude drug. iv. It helps in size reduction of crude drug. v. It is used in the drying of aluminium hydroxide. vi. It controls the moisture level in solids.

What are the two main steps in drying of materials?

Description : What are the two main steps in drying of materials?

Last Answer : Drying process involves both heat transfer and mass transfer. The steps needed for drying are; i.Heat must be supplied to provide latent heat of vaporization. ii.The liberated vapour must be removed by moving an air stream.

Give Significance of drying.

Description : Give Significance of drying.

Last Answer : 1) In pharmaceutical industry it is used as a unit process in the manufacture of granules which can be dispensed in bulk or converted into tablets or capsules. 2) Drying can also be used to ... of product, when powder is dried it gets solubilised fast. 7) Drying ensures free flowing of powders.

Describe construction and working of equipment used for moist heat sterilization.

Description : Describe construction and working of equipment used for moist heat sterilization. 

Last Answer : Moist heat sterilizer or Autoclave:  Diagram:  Construction:  It consists of a string metallic chamber usually made of stainless steel. It has a cover fitted with a steam vent, pressure gauze ... whole of the steam is removed, the lid is opened and the sterilized material is taken out.

Define Pharmacopoeia. List official books used in India.

Description : Define Pharmacopoeia. List official books used in India. 

Last Answer : Defination: Pharmakon means a drug and poeia means to make . Pharmacopoeia is defined as a compressive book which is issued under the authority of government and contains a list of drug ...  v) International Pharmacopeia  vi) Japanese Pharmacopoeia (J.P.)  vii) Martindale Extra Pharmacopoeia 

List the importance of size reduction in pharmaceutical industries.

Description : List the importance of size reduction in pharmaceutical industries. 

Last Answer : Importance of size reduction ;-  i) To increase the rate of solution in case of chemical substance because reduction of particle size,increases the surface area for the action of solvent. ii) To allow ... form. vi) To help in the process of suppression of solid form liquids by filtration.

List qualities of an ideal filter aid and state any two example of it.

Description : List qualities of an ideal filter aid and state any two example of it.

Last Answer : Ideal qualities of filter aid:  i. It should be remain suspended in the liquid. ii. It should be free from impurities. iii. It should be inert. iv. It should have a particle size distribution suitable ... i. Asbestos. ii. Cellulose. iii. Carbon. iv. Diatomaceous earth (silica). v. Perlite.

What are main objectives of mixing? Give the list of equipment’s used for mixing of semi solids.

Description : What are main objectives of mixing? Give the list of equipment’s used for mixing of semi solids.

Last Answer : Objectives of mixing are as follows: i) Simple physical mixing of materials to form a uniform mixture. ii) To promote the chemical reaction to get uniform product. iii) Dispersion of solid in ... Equipment's used for mixing of semi solids: Triple roller mill Agitator mixer. Planetary mixer

Give the list of chemicals which are used as bactericide?

Description : Give the list of chemicals which are used as bactericide?

Last Answer : List of Bactericides i. Chlorocresol . 0. 2% ii. Phenyl mercuric nitrate or acetate 0.002% iii. Benzalkonium chloride 0.01% iv. Thiomersal 0.01% v. Chlorohexidine acetate 0.01%

Give the list of equipments used for mixing of semi-solids.

Description : Give the list of equipments used for mixing of semi-solids.

Last Answer : Equipment’s used for mixing of semi solids: i. Triple roller mill. ii. Agitator mixer. iii. Planetary mixer. iv .Sigma Mixer

List the various equipment’s used for liquid mixing and explain how vortex formation can be avoided in liquid mixing.

Description : List the various equipment’s used for liquid mixing and explain how vortex formation can be avoided in liquid mixing. 

Last Answer : Equipment used for mixing of liquid:  1. Propeller mixture. 2. Turbine Mixture. 3. Paddle mixture. Vortex formation can be avoided in liquid mixing by making the following changes in the position of the ... the side of vessels. 4. Using push pull propeller. 5. Using baffles.

Write the advantages of microencapsulation and list different methods of microencapsulation.

Description : Write the advantages of microencapsulation and list different methods of microencapsulation.

Last Answer : Advantages of microencapsulation:  1. To mask the bitter taste of drugs like Paracetamol, Nitrofurantoin etc. 2. To reduce gastric and other gastro intestinal (G.I) tract irritations, ... 4) Electrostatic Deposition 5) Vacuum deposition 6) Polymerization 7) Multiorific Centrifugal Process.

List the precautions to be taken while using hot air oven.

Description : List the precautions to be taken while using hot air oven.

Last Answer : 1. Glass apparatus and equipment should be wrapped individually. 2. Articles should be placed in such away that they should not interfere with air flow 3. Once in operation oven should not be open ... substance should never be sterilized in hot air oven. 6. It should never be over loaded.

What is aseptic technique? List the various sources of contamination and explain the sterility test.

Description : What is aseptic technique? List the various sources of contamination and explain the sterility test.

Last Answer : Aseptic technique:  The method which is used to prevent the access of microorganism during the preparation of parenteral product and their testing are called Aseptic Technique . Sources of contamination: 1) ... the sample is declared to have pass the test and same test is repeated for two times.

Define emulsion and list the different emulsifying agents

Description : Define emulsion and list the different emulsifying agents

Last Answer : Definition: Emulsions are biphasic liquid preparation consisting of two immiscible liquid phasesone of which is dispersed as minute globules into other phase that is continuous phase and made miscible by ... monoesters, Milk of magnesia, Mg oxide, Mg trioxide, Carbowax, cholesterol and lecithin.

List the steps involved in slugging process

Description : List the steps involved in slugging process

Last Answer : i) Sieving ii) Weighing iii) Blending iv) Slugging v) Screening vi) Blending vii) Compression Or. Drug + Excipients → Blending → Slugging(formation of big size tablet) → Screening → Blending → Compression.

List different excipients used in processing of capsule.

Description : List different excipients used in processing of capsule. 

Last Answer : i. Diluents: To increase bulk, e.g. lactose, sorbitol, starch etc. ii. Absorbents: Eutectic or hygroscopic drug need absorbent, e.g. oxides and carbonates of magnesium and calcium. iii. Glidants: ... filling machine a lot of dust comes out to avoid this antidusting agent added e.g. inert oils.

Name any four materials used for packaging.

Description : Name any four materials used for packaging.

Last Answer : Types of materials used for packaging are: i) Glass ii) Plastic iii) Metal iv) Paper and board 

Enlist four methods for size reduction.

Description : Enlist four methods for size reduction. 

Last Answer : Methods for size reduction: i) Cutting ii) Compression iii) Impact iv) Attrition iv) Combined impact and attrition.

Give any four precautions to be taken during aseptic work.

Description : Give any four precautions to be taken during aseptic work.

Last Answer : i. Self hygiene: avoid coughing, sneezing.  ii. Avoid contamination of products.  iii. Cover the whole body by Wear complete body suit up to foot.  iv. Wear hand gloves.  v. Allow minimum persons to work in aseptic area.  vi. Don’t touch unnecessarily.

Define evaporation and explain any four factors affecting evaporation.

Description : Define evaporation and explain any four factors affecting evaporation.

Last Answer : Definition:   Evaporation is the free escape of vapour from the surface of a liquid bellow its boiling point. Factors affecting evaporation: 1) Temperature: The rate of evaporation ... evaporated: The rate of evaporation is directly proportional to the vapour pressure of the evaporating liquid

Explain any four factors affecting filtration. Draw a well labelled diagram of leaf filter.

Description : Explain any four factors affecting filtration. Draw a well labelled diagram of leaf filter.

Last Answer : Factors which affect the rate of filtration are:   1. Pressure: The rate of filtration of liquid is directly proportional to the pressure difference between the filter medium and filter cake. Thus, the ... cake increases which decreases the rate of filtration.  Diagram of leaf filter :

Explain any four factors affecting size reduction.

Description : Explain any four factors affecting size reduction.

Last Answer : Factors affecting Size Reduction: i. Hardness: Soft material easytobreak than hard. ii. Toughness: Drug with fibrous nature or those having high moisture content are tough and hard to reduce in size ... the size reduction of the material in a machine depends upon the bulk density of the substance.

Explain any four manufacturing defects in tablet manufacturing.

Description : Explain any four manufacturing defects in tablet manufacturing. 

Last Answer : i) Capping: There is partial or complete removal of top or bottom portion of the tablet. The reasons are: Excessive fines, defective punches and dies, high speed of the machine, too dry ... moves slightly upward before ejection of a tablet and gives a second though light imprint on the tablet.

Explain any four factors affecting size reduction

Description : Explain any four factors affecting size reduction

Last Answer : Factor affecting size reduction are:  1.Hardness: Soft material easy break than hard.  2.Toughness: Drug with fibrous nature or those having high moisture content are tough and hard to reduce in ... of the size reduction of the material in a machine depends upon the bulk density of the substance.

Give any four reasons for film coating.

Description : Give any four reasons for film coating.

Last Answer : To mask the disagreeable odour, colour or taste of the drug/tablet. To offer a physical and/or chemical protection to the drug. To protect drug from the deterioration effect of external ... . Increasing the mechanical strength of the dosage form. To improve the appearance of tablets

Define evaporation. Explain any four factors affecting rate of evaporation.

Description : Define evaporation. Explain any four factors affecting rate of evaporation.

Last Answer : Definition:  Evaporation is the free escape of vapour from the surface of a liquid bellow its boiling point. Factors affecting rate of evaporation:  1. Temperature: The rate of evaporation is ... The rate of evaporation is maximum at its boiling point when the liquid has maximum vapour pressure.

Explain principle and working of fluid energy mill with a diagram.

Description : Explain principle and working of fluid energy mill with a diagram.

Last Answer : Principle  It works on the principle of impact and attrition. Working: The air or inert gas is introduced with a very high pressure through nozzles. Solids are introduced into air stream through inlet. ... 100 mesh and then passed through fluid energy mill. Diagram of fluid energy mill :

Give application of simple distillation. What is the principle of fractional distillation?

Description : Give application of simple distillation. What is the principle of fractional distillation?

Last Answer : Applications of simple distillation:  i. It is used for the preparation of distilled water and water for injection. ii. Preparation of many volatile oils and aromatic water. iii. Purification ... becomes richer with the liquid having the lower boiling point which gets condensed in a condenser. 

Mention official and unofficial evaluation test for tablets. Describe weight variation test.

Description : Mention official and unofficial evaluation test for tablets. Describe weight variation test. 

Last Answer : Official test list: 1. Size and shape of tablet. 2. Appearance. 3. Content of active ingredient. 4. Uniformity of weight/weight variation test 5. Uniformity of content 6. ... the percentage deviation given in the table and none should deviate by more than twice that percentage.

Draw a well labelled diagram of aerosol container and give its advantages and disadvantages.

Description : Draw a well labelled diagram of aerosol container and give its advantages and disadvantages.

Last Answer : Diagram of aerosol container Advantages:   1. Medicament can be delivered directly to affected areas. 2. Absence of air prevents oxidation. 3. Hydrolysis of medicament prevented ... on injured skin. 4. Difficulties occurred during formulation when drug not soluble in propellants.

Discuss working of ball mill with neat diagram.

Description : Discuss working of ball mill with neat diagram. 

Last Answer : Working: The drug to be ground is put into the cylinder of the mill and is rotated. The speed of the rotation is very different. At low speed, the mass of balls will slide or roll over each other and ... and passed through a sieve to get powder of the required size. Ball mill diagram:   

Define pharmaceutical container. Give qualities of an ideal container.

Description : Define pharmaceutical container. Give qualities of an ideal container.

Last Answer : Definition: Pharmaceutical container  A device that holds the drug and it may or may not be in direct contact with the pharmaceutical dosage form or preparations. Qualities of an ideal container:  1 ... and temperature. 7. Labelled easily 8. Non-toxic. 9. Closure easily removable/replaceable.

Write the official standards of powder.

Description : Write the official standards of powder.

Last Answer : i. Coarse powder: A powder of which all particles pass through sieve no 10 with nominal aperture size 1.7mm and not more than 40% pass through sieve no 44 with nominal aperture size 355um.  ii. ... powder: A powder of which all particles pass through sieve no 120 with nominal aperture size 125 um.

Write special application of capsule.

Description : Write special application of capsule. 

Last Answer : Applications of capsule:  1. Enteric coated capsule: These capsules do not disintegrate in stomach (Acidic Medium) but break up in intestine (Alkaline medium). On commercial scale, a coating ... gelatine commonly used Capsule punctured by using sterile needle and then instilled into the eye.

Give the principle and working of Fluidised bed dryer.

Description : Give the principle and working of Fluidised bed dryer.

Last Answer : Principle: In FBD, good contact between hot air and particles to be dried is obtained which cause rapid drying. Working of Fluidised bed dryer: Two types of FBD are used in pharmaceutical industry. There are ... ranging from 5 kg to 200 kg with an average drying time of about 20-40 min.

Define aseptic techniques. What are the various sources of contamination?

Description : Define aseptic techniques. What are the various sources of contamination?

Last Answer : Definition: Aseptic technique  The method which is used to prevent the access of microorganism during the preparation of parenteral product and their testing are called Aseptic Technique Sources of ... are also a source of contamination. A handkerchief is the richest source of contamination. 

Give principal and working of silverson homogenizer with labelled diagram.

Description : Give principal and working of silverson homogenizer with labelled diagram.

Last Answer : Principal:   These work on the principal of braking large globules in to small globules by passing them under pressure through a narrow orifice. Working:   The emulsified head is placed in the vessel ... blades. So a fine emulsion is produced which is then expelled out. Diagram :

Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Description : Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Last Answer : Economical. Available in variety of sizes and shapes.  Chemically inert, impermeable, strong and rigid. Does not deteriorate with age. Easy to label. Excellent barrier against light. ... easy to break. Heavy, Bulky to carry. Leaching and absorption of alkalis. Flak formation

Draw a well labelled diagram of filter candle. Give its working and disadvantages.

Description : Draw a well labelled diagram of filter candle. Give its working and disadvantages.

Last Answer : Diagram : Working  : The filter candle is placed in a vessel containing the liquid to be filtered. When vacuum is applied, the pressure inside the candle is decreased. Due to ... Disadvantages   1. Chance of clogging/blocking. 2. Traces of material may come in the solution.

Explain the factors affecting evaporation of a liquid.

Description : Explain the factors affecting evaporation of a liquid.

Last Answer : Factor affecting evaporation  1. Temperature: The rate of evaporation is directly proportional to the temperature of the liquid. The evaporation can be accelerated by increasing the temperature but it ... of evaporation is maximum at its boiling point when the liquid has maximum vapour pressure.

Write the working of filter press with well labelled diagram.

Description : Write the working of filter press with well labelled diagram.

Last Answer : Working:  1. The slurry is pumped in under positive pressure up to 20 bar and fill each frame. 2. The filtrate passes through the cloths on opposite sides of the frame and runs down between the ... 6. Thickness of cake can be varied by using frame of different thickness. Diagram: 

Explain in detail evaporating still with its advantage and disadvantages.

Description : Explain in detail evaporating still with its advantage and disadvantages.

Last Answer : It consist of a hemispherical pan made from copper or stainless steel. It is surrounded by a steam jacket. Still is covered from top and connected to condenser. Hemispherical shape ... heat transfer is poor. Heating surface is limited. Not suitable for thermolabile material.