List the steps involved in slugging process

List the steps involved in slugging process
by

1 Answer

Answer :

i) Sieving

ii) Weighing

iii) Blending

iv) Slugging

v) Screening

vi) Blending

vii) Compression

Or.

Drug + Excipients → Blending → Slugging(formation of big size tablet) → Screening → Blending → Compression.
by

Related questions

Give steps involved in moist granulation.

Description : Give steps involved in moist granulation.

Last Answer : Steps: i. Moisten of Medicament with excipients with granulating agent. ii. Sieving of moist mass through sieve number 8 or 10. iii. Drying of wet granules in hot air oven at ... sieve number 20 to collect granules of uniform size v. Lubrication of sifted granules with lubricating agent

State and explain the steps involved in sugar coating of tablet.

Description : State and explain the steps involved in sugar coating of tablet.

Last Answer : Steps of sugar coating of tablet: Sieving Sealing Sub-coating Syrup coating Finishing Polishing i) Sieving :- The tablets to be coated are shaken in a suitable sieve to remove the fine ... on the canvas cloth. This gives a proper shining to the tablets Sugar coating is an art 

Explain the different steps involved in sugar coating of tablet.

Description : Explain the different steps involved in sugar coating of tablet.

Last Answer : Steps of sugar coating of tablet:-  Sieving Sealing Sub-coating Syrup coating Finishing Polishing i) Sieving :- The tablets to be coated are shaken in a suitable sieve to remove the ... the wax coated tablets are rubbed on the canvas cloth. This gives a proper shining to the tablets

What do you mean by reserved percolation? Enlist different steps involved in it.

Description : What do you mean by reserved percolation? Enlist different steps involved in it.

Last Answer : Reserve percolation:   In this process a part of percolate, generally 3/4th volume of the finished preparation is reserved.(contains high solute concentration) Then the percolation process is continued ... :  a. Imbibition, b. Maceration, c. Percolation, d. Distillation or evaporation.

What are the two main steps in drying of materials?

Description : What are the two main steps in drying of materials?

Last Answer : Drying process involves both heat transfer and mass transfer. The steps needed for drying are; i.Heat must be supplied to provide latent heat of vaporization. ii.The liberated vapour must be removed by moving an air stream.

What are the different mechanisms involved in the method of size reduction.

Description : What are the different mechanisms involved in the method of size reduction.

Last Answer : Cutting. Compression. Impact Attrition Combined impact and attrition 

Define microencapsulation.What are its advantages and different techniques involved in it?

Description : Define microencapsulation.What are its advantages and different techniques involved in it?

Last Answer : Microencapsulation : it is the technique in which a thin coating is applied on the particles of solids, liquids, resulting in the formation of micro-capsules ranging from micron to ... 4) Electrostatic Deposition 5) Vacuum deposition 6) Polymerization 7) Multiorific Centrifugal Process.

Write the stages involved in sterilization of surgical dressing.

Description : Write the stages involved in sterilization of surgical dressing. 

Last Answer : Stages of sterilisation are: 1) Pack or wrap the unsterilized surgical dressing into a suitable device/perforated container or any packaging material i.e parchment paper. 2) Load this container ... the sterilizer. 5) Containers are labelled with date of sterilization to prevent overload storage.

__________ is the process used for setting up compressive stresses in the surface of a metal to improve its fatigue strength. (A) Lancing (B) Shot peening (C) Slugging (D) Spinning

Description : __________ is the process used for setting up compressive stresses in the surface of a metal to improve its fatigue strength. (A) Lancing (B) Shot peening (C) Slugging (D) Spinning

Last Answer : (B) Shot peening

Define Pharmacopoeia. List official books used in India.

Description : Define Pharmacopoeia. List official books used in India. 

Last Answer : Defination: Pharmakon means a drug and poeia means to make . Pharmacopoeia is defined as a compressive book which is issued under the authority of government and contains a list of drug ...  v) International Pharmacopeia  vi) Japanese Pharmacopoeia (J.P.)  vii) Martindale Extra Pharmacopoeia 

List any four equipment used in drying.

Description : List any four equipment used in drying.

Last Answer : Equipment used for drying: i) Tray dryer ii) Tunnel dryer iii) Rotary dryer iv) Fluidized Bed Dryer v)Vacuum dryer vi) Freeze dryer.

List the importance of size reduction in pharmaceutical industries.

Description : List the importance of size reduction in pharmaceutical industries. 

Last Answer : Importance of size reduction ;-  i) To increase the rate of solution in case of chemical substance because reduction of particle size,increases the surface area for the action of solvent. ii) To allow ... form. vi) To help in the process of suppression of solid form liquids by filtration.

List qualities of an ideal filter aid and state any two example of it.

Description : List qualities of an ideal filter aid and state any two example of it.

Last Answer : Ideal qualities of filter aid:  i. It should be remain suspended in the liquid. ii. It should be free from impurities. iii. It should be inert. iv. It should have a particle size distribution suitable ... i. Asbestos. ii. Cellulose. iii. Carbon. iv. Diatomaceous earth (silica). v. Perlite.

What are main objectives of mixing? Give the list of equipment’s used for mixing of semi solids.

Description : What are main objectives of mixing? Give the list of equipment’s used for mixing of semi solids.

Last Answer : Objectives of mixing are as follows: i) Simple physical mixing of materials to form a uniform mixture. ii) To promote the chemical reaction to get uniform product. iii) Dispersion of solid in ... Equipment's used for mixing of semi solids: Triple roller mill Agitator mixer. Planetary mixer

Give the list of chemicals which are used as bactericide?

Description : Give the list of chemicals which are used as bactericide?

Last Answer : List of Bactericides i. Chlorocresol . 0. 2% ii. Phenyl mercuric nitrate or acetate 0.002% iii. Benzalkonium chloride 0.01% iv. Thiomersal 0.01% v. Chlorohexidine acetate 0.01%

Give the list of equipments used for mixing of semi-solids.

Description : Give the list of equipments used for mixing of semi-solids.

Last Answer : Equipment’s used for mixing of semi solids: i. Triple roller mill. ii. Agitator mixer. iii. Planetary mixer. iv .Sigma Mixer

List the various equipment’s used for liquid mixing and explain how vortex formation can be avoided in liquid mixing.

Description : List the various equipment’s used for liquid mixing and explain how vortex formation can be avoided in liquid mixing. 

Last Answer : Equipment used for mixing of liquid:  1. Propeller mixture. 2. Turbine Mixture. 3. Paddle mixture. Vortex formation can be avoided in liquid mixing by making the following changes in the position of the ... the side of vessels. 4. Using push pull propeller. 5. Using baffles.

Write the advantages of microencapsulation and list different methods of microencapsulation.

Description : Write the advantages of microencapsulation and list different methods of microencapsulation.

Last Answer : Advantages of microencapsulation:  1. To mask the bitter taste of drugs like Paracetamol, Nitrofurantoin etc. 2. To reduce gastric and other gastro intestinal (G.I) tract irritations, ... 4) Electrostatic Deposition 5) Vacuum deposition 6) Polymerization 7) Multiorific Centrifugal Process.

List the precautions to be taken while using hot air oven.

Description : List the precautions to be taken while using hot air oven.

Last Answer : 1. Glass apparatus and equipment should be wrapped individually. 2. Articles should be placed in such away that they should not interfere with air flow 3. Once in operation oven should not be open ... substance should never be sterilized in hot air oven. 6. It should never be over loaded.

What is aseptic technique? List the various sources of contamination and explain the sterility test.

Description : What is aseptic technique? List the various sources of contamination and explain the sterility test.

Last Answer : Aseptic technique:  The method which is used to prevent the access of microorganism during the preparation of parenteral product and their testing are called Aseptic Technique . Sources of contamination: 1) ... the sample is declared to have pass the test and same test is repeated for two times.

Define emulsion and list the different emulsifying agents

Description : Define emulsion and list the different emulsifying agents

Last Answer : Definition: Emulsions are biphasic liquid preparation consisting of two immiscible liquid phasesone of which is dispersed as minute globules into other phase that is continuous phase and made miscible by ... monoesters, Milk of magnesia, Mg oxide, Mg trioxide, Carbowax, cholesterol and lecithin.

List different excipients used in processing of capsule.

Description : List different excipients used in processing of capsule. 

Last Answer : i. Diluents: To increase bulk, e.g. lactose, sorbitol, starch etc. ii. Absorbents: Eutectic or hygroscopic drug need absorbent, e.g. oxides and carbonates of magnesium and calcium. iii. Glidants: ... filling machine a lot of dust comes out to avoid this antidusting agent added e.g. inert oils.

Differentiate between maceration process for organised drugs and maceration for unorganised drugs.

Description : Differentiate between maceration process for organised drugs and maceration for unorganised drugs.

Last Answer : Sr. No. Organised Drugs  Unorganised drugs. 1 Drug along with whole menstrum is used in maceration process Drug along with 4/5th of menstrum is used in maceration process  2 The ... made by this process are: a. Tincture of Tolu b. Tincture of Myrrh c. Tincture of Benzoin

Discuss in brief the stepwise process of percolation used in preparation of tincture.

Description : Discuss in brief the stepwise process of percolation used in preparation of tincture.

Last Answer : Stages involved in preparation of tincture by percolation:  a. Imbibition: Drug is kept is moistened with sufficient quantity of menstruum. Allow to stand for 4 hr. Significance: o It allow ... extraction. After collecting 3/4th volume of product then marc is pressed. Mix the liquids.

Draw a well labelled diagram of ‘Soxhlet apparatus.’ Mention the various limitations of continuous hot percolation process.

Description : Draw a well labelled diagram of ‘Soxhlet apparatus.’ Mention the various limitations of continuous hot percolation process. 

Last Answer : Limitation: 1. Physical character of the drug: If the drug would block the soxhlet apparatus then this process cannot be used for extraction. Eg opium. Gum, resin, ... for drugs having thermolabile active constituents such as enzymes, alkaloids, anthraquinone derivatives, esters, etc. 

Explain in detail about maceration with adjustment. How does it differ from simple maceration process?

Description : Explain in detail about maceration with adjustment. How does it differ from simple maceration process?

Last Answer : Maceration with adjustment: This process is carried out for unorganized drug. Method: i) Place unorganized drug with 4/5th of the menstruum in a close vessel for 2-7 days. ii) ... of Capsicum Examples of tinctures: Compound Tincture of Benzoin, Tincture of Tolu, Tincture of Myrrh

Write in detail about modified percolation process.

Description : Write in detail about modified percolation process. 

Last Answer : Modified Percolation: In percolation process for tinctures drug\ percolate (d/p) ratio is 1:4.The drug/percolate ratio is reduced to 1:3 by modifying percolation process. Thus saves lot of heat, ... evaporated and then mixed with main percolate.  Final volume is made by adding more menstrum. 

Draw a labelled diagram of apparatus used for continuous hot extraction process. Mention limitations of the process.

Description : Draw a labelled diagram of apparatus used for continuous hot extraction process. Mention limitations of the process.

Last Answer : Diagram: Limitations: process cannot be used in following conditions.  Physical character of the drug: Drugs which may block the apparatus such as opium, gums, resins, etc cannot ... process. Chemical constituents: Unsuitable for thermolabile drugs, such as enzymes, alkaloids, etc

Define extraction and explain reserve percolation process.

Description : Define extraction and explain reserve percolation process.

Last Answer : Definition: Extraction may be defined as the treatment of the plant or animal tissues with solvent, whereby active constituents are dissolved, and most of the inert matter remains undissolved. Reserve ... in reserve portion of percolate and sufficient menstruum is added to make up the volume. 

Describe simple maceration process.

Description : Describe simple maceration process.

Last Answer : Simple maceration is a maceration process for tinctures made from organised drugs. In this process, the drug is placed with the whole of the menstruum in a closed vessel for seven days. During ... made by simple maceration process are Tincture of Orange, Tincture of Lemon, Tincture of Squill, etc.

Explain the method of hot percolation process with well labelled diagram and write its limitations.

Description : Explain the method of hot percolation process with well labelled diagram and write its limitations.

Last Answer : Diagram: Procedure :  1) The menstrum is placed in a round bottom flask. 2) The drug to be extracted is packed in a filter paper and placed in the body ... is unsuitable for drugs having thermolabile active constituents such as enzymes, alkaloids, anthraquinone derivatives, esters, etc.

Describe the process of manufacturing of hard gelatine capsules.

Description : Describe the process of manufacturing of hard gelatine capsules. 

Last Answer : Process of manufacturing of hard gelatine capsules.   i)Capsules are filled in the loading tray& placed over the filling bed. ii) Cam handle is operated to separate the capsule caps from their ... cleaned by wiping with clean cloth. This gives good shine to the capsules. Diagram

Explain tyndallisation process

Description : Explain tyndallisation process

Last Answer : Tyndallization, also called fractional sterilization and discontinuous heating, is a form of sterilization.This method is relatively simple but somewhat time-consuming.  Process: This is a fractional sterilization ... the spores may germinate in the days to follow and will be killed subsequently. 

Ultra purification of a metal is done by (1) slugging (2) zone melting (3) smelting (4) leaching

Description : Ultra purification of a metal is done by (1) slugging (2) zone melting (3) smelting (4) leaching

Last Answer : (2) zone melting Explanation: When metals are required in a ultra pure state, the zone refining method is used. The principleemployed states that the impurities, which lower the melting point of ... remain preferentially dissolved in the liquid phase and purer metal will emerge in the solid phase.

Slugging in a fluidised bed can be avoided by using (A) Tall narrow vessel (B) Deep bed of solids (C) Shallow beds of solids and proper choice of particle size (D) Very large particles

Description : Slugging in a fluidised bed can be avoided by using (A) Tall narrow vessel (B) Deep bed of solids (C) Shallow beds of solids and proper choice of particle size (D) Very large particles

Last Answer : (C) Shallow beds of solids and proper choice of particle size

Slugging occurs in a fluidised bed, if the bed is (A) Narrow (B) Deep (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Slugging occurs in a fluidised bed, if the bed is (A) Narrow (B) Deep (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Ultra purification of a metal is done by : (1) slugging (2) zone melting (3) smelting (4) leaching

Description : Ultra purification of a metal is done by : (1) slugging (2) zone melting (3) smelting (4) leaching

Last Answer : zone melting

Explain principle and working of fluid energy mill with a diagram.

Description : Explain principle and working of fluid energy mill with a diagram.

Last Answer : Principle  It works on the principle of impact and attrition. Working: The air or inert gas is introduced with a very high pressure through nozzles. Solids are introduced into air stream through inlet. ... 100 mesh and then passed through fluid energy mill. Diagram of fluid energy mill :

Give application of simple distillation. What is the principle of fractional distillation?

Description : Give application of simple distillation. What is the principle of fractional distillation?

Last Answer : Applications of simple distillation:  i. It is used for the preparation of distilled water and water for injection. ii. Preparation of many volatile oils and aromatic water. iii. Purification ... becomes richer with the liquid having the lower boiling point which gets condensed in a condenser. 

Mention official and unofficial evaluation test for tablets. Describe weight variation test.

Description : Mention official and unofficial evaluation test for tablets. Describe weight variation test. 

Last Answer : Official test list: 1. Size and shape of tablet. 2. Appearance. 3. Content of active ingredient. 4. Uniformity of weight/weight variation test 5. Uniformity of content 6. ... the percentage deviation given in the table and none should deviate by more than twice that percentage.

Draw a well labelled diagram of aerosol container and give its advantages and disadvantages.

Description : Draw a well labelled diagram of aerosol container and give its advantages and disadvantages.

Last Answer : Diagram of aerosol container Advantages:   1. Medicament can be delivered directly to affected areas. 2. Absence of air prevents oxidation. 3. Hydrolysis of medicament prevented ... on injured skin. 4. Difficulties occurred during formulation when drug not soluble in propellants.

Discuss working of ball mill with neat diagram.

Description : Discuss working of ball mill with neat diagram. 

Last Answer : Working: The drug to be ground is put into the cylinder of the mill and is rotated. The speed of the rotation is very different. At low speed, the mass of balls will slide or roll over each other and ... and passed through a sieve to get powder of the required size. Ball mill diagram:   

Define pharmaceutical container. Give qualities of an ideal container.

Description : Define pharmaceutical container. Give qualities of an ideal container.

Last Answer : Definition: Pharmaceutical container  A device that holds the drug and it may or may not be in direct contact with the pharmaceutical dosage form or preparations. Qualities of an ideal container:  1 ... and temperature. 7. Labelled easily 8. Non-toxic. 9. Closure easily removable/replaceable.

Write the official standards of powder.

Description : Write the official standards of powder.

Last Answer : i. Coarse powder: A powder of which all particles pass through sieve no 10 with nominal aperture size 1.7mm and not more than 40% pass through sieve no 44 with nominal aperture size 355um.  ii. ... powder: A powder of which all particles pass through sieve no 120 with nominal aperture size 125 um.

Write special application of capsule.

Description : Write special application of capsule. 

Last Answer : Applications of capsule:  1. Enteric coated capsule: These capsules do not disintegrate in stomach (Acidic Medium) but break up in intestine (Alkaline medium). On commercial scale, a coating ... gelatine commonly used Capsule punctured by using sterile needle and then instilled into the eye.

Give the principle and working of Fluidised bed dryer.

Description : Give the principle and working of Fluidised bed dryer.

Last Answer : Principle: In FBD, good contact between hot air and particles to be dried is obtained which cause rapid drying. Working of Fluidised bed dryer: Two types of FBD are used in pharmaceutical industry. There are ... ranging from 5 kg to 200 kg with an average drying time of about 20-40 min.

Define aseptic techniques. What are the various sources of contamination?

Description : Define aseptic techniques. What are the various sources of contamination?

Last Answer : Definition: Aseptic technique  The method which is used to prevent the access of microorganism during the preparation of parenteral product and their testing are called Aseptic Technique Sources of ... are also a source of contamination. A handkerchief is the richest source of contamination. 

Give principal and working of silverson homogenizer with labelled diagram.

Description : Give principal and working of silverson homogenizer with labelled diagram.

Last Answer : Principal:   These work on the principal of braking large globules in to small globules by passing them under pressure through a narrow orifice. Working:   The emulsified head is placed in the vessel ... blades. So a fine emulsion is produced which is then expelled out. Diagram :

Define drying. Give application of drying in pharmacy.

Description : Define drying. Give application of drying in pharmacy.

Last Answer : Definition:  Drying: It is defined as final removal of liquid from solid by vaporization with aid of heat. Application:  1) In pharmaceutical industry it is used as a unit process in the ... of product, when powder is dried it gets solublised fast. 7) Drying ensures free flowing of powders.

Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Description : Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Last Answer : Economical. Available in variety of sizes and shapes.  Chemically inert, impermeable, strong and rigid. Does not deteriorate with age. Easy to label. Excellent barrier against light. ... easy to break. Heavy, Bulky to carry. Leaching and absorption of alkalis. Flak formation