What oil and gasoline to the fichtl?

What kind of petrol does fichtl run and what oil is added to the petrol?
by

1 Answer

Answer :

Today it is easiest to refuel N95 (or N91) and 2T oil, the ratio I would recommend 33: 1 (after all, it is no longer the youngest engine) ... ;-)
by

Related questions

Does it matter what kind of gasoline I put in the fichtl?

Description : I have petrol but I don't know what it is. What can happen?

Last Answer : Fichtlu is - basically it doesn't matter if it's N95 or N100, but it can be important whether oil is added or not. If you overflow the gasoline, the engine will not run much, your candle will be oiled and ... in there, you will stuck the engine. Ideally, it should be about 1:33 - 1:40 (with M2T).

Which is more dense motor oil or gasoline?

Description : Which is more dense motor oil or gasoline?

Last Answer : Motor oil is denser.

Which of the following is the lightest and most volatile liquid fuel A. diesel B. kerosene C. fuel oil D. gasoline

Description : Which of the following is the lightest and most volatile liquid fuel A. diesel B. kerosene C. fuel oil D. gasoline

Last Answer : ANSWER : D

Which of the following is the lightest and most volatile liquid fuel? a. diesel b. kerosene c. gasoline d. fuel oil

Description : Which of the following is the lightest and most volatile liquid fuel? a. diesel b. kerosene c. gasoline d. fuel oil

Last Answer : ANSWER c. gasoline

A supercharger is used to compress a. air b. gasoline c. fuel oil d. all of the above

Description : A supercharger is used to compress a. air b. gasoline c. fuel oil d. all of the above

Last Answer : ANSWER a. air

Gasoline is 1. Same as diesel oil 2. Same as petrol 3. Obtained from natural gas 4. Obtained from crude oil The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 4

Description : Gasoline is 1. Same as diesel oil 2. Same as petrol 3. Obtained from natural gas 4. Obtained from crude oil The correct answers are: (a) 1 and 3 (b) 2 and 4 (c) 3 and 4 (d) 1 and 4

Last Answer : Ans:(b)

Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude oil are separated by fractional distillation. The correct statements are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Description : Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude ... (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

The fuel -substance that causes minimum atmospheric pollution is (a) hydrogen (b) kerosene oil (c) coke (d) gasoline

Description : The fuel -substance that causes minimum atmospheric pollution is (a) hydrogen (b) kerosene oil (c) coke (d) gasoline

Last Answer : Ans:(a)

Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil

Description : Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil

Last Answer : (4) Lubricating oil Explanation: Lubricating oil is the most commonly used lubricant because of its wide range of possible applications. The two basic categories of lube oil are mineral and synthetic.

The catalytic cracking of heavier petroleum fraction is done to produce mainly (A) Gasoline (B) Asphalt (C) Diesel oil (D) Tar

Description : The catalytic cracking of heavier petroleum fraction is done to produce mainly (A) Gasoline (B) Asphalt (C) Diesel oil (D) Tar

Last Answer : (C) Diesel oil

Carbon/hydrogen ratio (by weight) is maximum (out of following) for (A) Gasoline (B) Kerosene (C) Light gas oil (D) Heavy fuel oil

Description : Carbon/hydrogen ratio (by weight) is maximum (out of following) for (A) Gasoline (B) Kerosene (C) Light gas oil (D) Heavy fuel oil

Last Answer : (A) Gasoline

Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Description : Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Last Answer : (C) Fuel oil

The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Description : The most commonly used feed stock for the reforming reactor is (A) Heavy fuel oil (B) Residuum (C) Straight run gasoline (D) Casing head gasoline

Last Answer : (C) Straight run gasoline

Which of the following fractions of a crude oil will have the maximum gravity API (i.e. °API)? (A) Diesel (B) Gasoline (C) Atmospheric gas oil (D) Vacuum gas oil

Description : Which of the following fractions of a crude oil will have the maximum gravity API (i.e. °API)? (A) Diesel (B) Gasoline (C) Atmospheric gas oil (D) Vacuum gas oil

Last Answer : (C) Atmospheric gas oil

Natural gasoline is produced (A) From oil wells (B) In oil refineries (C) By natural gas stripping (D) None of these

Description : Natural gasoline is produced (A) From oil wells (B) In oil refineries (C) By natural gas stripping (D) None of these

Last Answer : (C) By natural gas stripping

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Percentage of straight run gasoline in a typical crude oil may be around (A) 6 (B) 18 (C) 38 (D) 52

Description : Percentage of straight run gasoline in a typical crude oil may be around (A) 6 (B) 18 (C) 38 (D) 52

Last Answer : (D) 52

Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Description : Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil

Last Answer : (A) Naphtha or straight run gasoline

Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Description : Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these

Last Answer : (C) Wax from lube oi

. The main aim of cracking is to produce (A) Gasoline (B) Lube oil (C) Petrolatum (D) Coke

Description : . The main aim of cracking is to produce (A) Gasoline (B) Lube oil (C) Petrolatum (D) Coke

Last Answer : (A) Gasoline

Visbreaking (A) Uses natural gas as feed (B) Is carried out at atmospheric pressure (C) Produces fuel oil of lower viscosity (D) Produces gasoline only

Description : Visbreaking (A) Uses natural gas as feed (B) Is carried out at atmospheric pressure (C) Produces fuel oil of lower viscosity (D) Produces gasoline only

Last Answer : (C) Produces fuel oil of lower viscosity

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following has maximum hydrogen/carbon ratio (by weight)? (A) Naphtha (B) Gasoline (C) Diesel (D) Fuel oil

Description : Which of the following has maximum hydrogen/carbon ratio (by weight)? (A) Naphtha (B) Gasoline (C) Diesel (D) Fuel oil

Last Answer : (B) Gasoline

Laboratory gas is obtained by the cracking of (A) Gasoline (B) Diesel (C) Fuel oil (D) Kerosene

Description : Laboratory gas is obtained by the cracking of (A) Gasoline (B) Diesel (C) Fuel oil (D) Kerosene

Last Answer : (D) Kerosene

Presence of volatile compounds like gasoline, oil, alcohol, ether etc. in municipal sewers may cause (A) Explosion(B) Non biodegradable foam(C) Undesirable plant growth(D) Corrosion

Description : Presence of volatile compounds like gasoline, oil, alcohol, ether etc. in municipal sewers may cause (A) Explosion (B) Non biodegradable foam (C) Undesirable plant growth (D) Corrosion

Last Answer : (A) Explosion

Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Description : Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Last Answer : Gasoline

For rapid curing cutbacks, the oil used is (A) Gasoline (B) Kerosene oil (C) Light diesel (D) Heavy diesel

Description : For rapid curing cutbacks, the oil used is (A) Gasoline (B) Kerosene oil (C) Light diesel (D) Heavy diesel

Last Answer : Answer: Option A

Which of the following is the lightest and most volatile liquid fuel?  A.Gasoline  B.Kerosene  C.Fuel oil

Description : Which of the following is the lightest and most volatile liquid fuel?  A.Gasoline  B.Kerosene  C.Fuel oil

Last Answer : Answer: A