Distance 5.5m beam 25x25 can be only two columns

I want to do a stand and I need to know the size of the beam that will be on two struts 5.5 m apart
by

1 Answer

Answer :

Need Answer
by

Related questions

A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Description : A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Last Answer : d.16.27 mm.

A uniformly distributed load of 20 kN/m acts on a simply supported beam of rectangular cross section of width 20 mm and depth 60 mm. What is the maximum bending stress acting on the beam of 5m? a. 5030 Mpa b. 5208 Mpa c. 6600 Mpa d. Insufficient data

Description : A uniformly distributed load of 20 kN/m acts on a simply supported beam of rectangular cross section of width 20 mm and depth 60 mm. What is the maximum bending stress acting on the beam of 5m? a. 5030 Mpa b. 5208 Mpa c. 6600 Mpa d. Insufficient data

Last Answer : b. 5208 Mpa

A this usual rowing rate, Mohit can travel 12 miles downstream in a certain river in 6 hours less than it takes him to travel the same distance upstream. But if he could double his usual rowing rate for his 24 miles round trip, the downstream 12 miles would then take only one hour less than the upstream 12 miles. What is the speed of the current in miles per hour? A.2.5m/hr B.4 m/hr C.8/3 m/hr D. 5/3m/hr

Description : A this usual rowing rate, Mohit can travel 12 miles downstream in a certain river in 6 hours less than it takes him to travel the same distance upstream. But if he could double his usual rowing rate for his 24 miles round trip, ... current in miles per hour? A.2.5m/hr B.4 m/hr C.8/3 m/hr D. 5/3m/hr

Last Answer : Answer-C Basic Formula: Speed of the stream = ½ (a-b) km/hr Explanation: Let the speed in still water be x m/hr Speed of stream be y m/hr Then, speed upstream = x-y m/hr and Speed downstream = x+y m/hr 12/x-y - ... 1] 3y^2 = 8 y so, y = 8/3 speed of the current = 8/3 m/hr = 2 (2/3) m/hr

Height gauges should be located at a minimum distance of….. from gate post. (a) 5 m (b) 7.5m (c) 8m* (d)10m

Description : Height gauges should be located at a minimum distance of….. from gate post. (a) 5 m (b) 7.5m (c) 8m* (d)10m

Last Answer : (c) 8m*

Stopping distance of vehicles : When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is an important factor for road safety and depends on the initial velocity ( v 0 ) and the braking capacity, or deceleration, ?a that is caused by the braking. A car travelling at speed 72km/hr suddenly applies the brake with the deceleration of 5m/s2. Find the stopping distance of the car -Science

Description : Stopping distance of vehicles : When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is an important factor for road safety and depends on ... the brake with the deceleration of 5m/s2. Find the stopping distance of the car -Science

Last Answer : Here u=72 km/hr = 72×10003600m/s=2072×10003600m/s=20 m/s , v=0 a= -5 m/s2 Now using the relation v2=u2+2asv2=u2+2as 0=(20)2+2×(−5)×s0=(20)2+2×(−5)×s s=40ms=40m

An object of `1cm^(2)` face area is placed at a distance of 1.5m from a screen. How far from the object should a concave mirror be placed so that it f

Description : An object of `1cm^(2)` face area is placed at a distance of 1.5m from a screen. How far from the object should a concave mirror be placed so that it f

Last Answer : An object of `1cm^(2)` face area is placed at a distance of 1.5m from a screen. How ... the screen? Also, calculate the focal length of the mirror.

A frosted bulb which may be taken as an isotropic source, gives as illumination of `8lm//m^(2)` at a distance of 5m. Calculate (i) its luminous intens

Description : A frosted bulb which may be taken as an isotropic source, gives as illumination of `8lm//m^(2)` at a distance of 5m. Calculate (i) its luminous intens

Last Answer : A frosted bulb which may be taken as an isotropic source, gives as illumination of `8lm//m^(2)` ... and (ii) the total luminous flux from the blub.

Calculate the illuminance at a surface distance 0.5m from a ligth source of luminous intensity 200 cd, assuming normal incidence. If the area of the s

Description : Calculate the illuminance at a surface distance 0.5m from a ligth source of luminous intensity 200 cd, assuming normal incidence. If the area of the s

Last Answer : Calculate the illuminance at a surface distance 0.5m from a ligth source of luminous intensity 200 cd, ... , what is the luminous flux on this area ?

Calculate the intensity of illumination at a distance of 0.5m from a source of light of power 200 candela assuming normal incidence.

Description : Calculate the intensity of illumination at a distance of 0.5m from a source of light of power 200 candela assuming normal incidence.

Last Answer : Calculate the intensity of illumination at a distance of 0.5m from a source of light of power 200 candela assuming normal incidence.

Calculate the capacitance of a material in air with area 20 units and distance between plates is 5m. a) 35.36pF b) 3.536pF c) 35.36nF d) 3.536nF

Description : Calculate the capacitance of a material in air with area 20 units and distance between plates is 5m. a) 35.36pF b) 3.536pF c) 35.36nF d) 3.536nF

Last Answer : a) 35.36pF

Pick up the correct statement from the following: (A) Construction joints in columns are provided a few cm below the junction of beam (B) Construction joints in columns are provided at the bottom hunching (C) Construction joints in beams and slabs are provided within middle third (D) All the above

Description : Pick up the correct statement from the following: (A) Construction joints in columns are provided a few cm below the junction of beam (B) Construction joints in columns are provided at the bottom ... (C) Construction joints in beams and slabs are provided within middle third (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed load, is (where is the distance of centre of gravity of column loads). (A) y = L - (l - ) (B) y = L/2 + (l - ) (C) y = L/2 - (l + ) (D) y = L/2 - (l - )

Description : If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed ... l - ) (C) y = L/2 - (l + ) (D) y = L/2 - (l - )

Last Answer : Answer: Option D

Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Description : Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of (A) 0.1 L from the outer edge of column (B) 0.1 L from the centre edge of column (C) Half the distance of projection (D) One-fourth the distance of projection

Last Answer : Answer: Option B

Inter-distance between ventilation columns in a sewer line is kept A. 25 to 50 m B. 50 m to 100 m C. 100 m to 150 m D. 150 m to 300 m

Description : Inter-distance between ventilation columns in a sewer line is kept A. 25 to 50 m B. 50 m to 100 m C. 100 m to 150 m D. 150 m to 300 m

Last Answer : ANS: D

Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of the column (C) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Description : Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of ... ) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Last Answer : Answer: Option C

The volume (in ml) of 0.5 M NaOH required for the complete reaction with 150 ml of 1.5M `H_(3)PO_(3)` solution is

Description : The volume (in ml) of 0.5 M NaOH required for the complete reaction with 150 ml of 1.5M `H_(3)PO_(3)` solution is

Last Answer : The volume (in ml) of 0.5 M NaOH required for the complete reaction with 150 ml of 1.5M `H_(3)PO_(3)` solution is A. 1350 B. 900 C. 1250 D. 1150

How many square meters in a area 3m by 5.5m?

Description : How many square meters in a area 3m by 5.5m?

Last Answer : It is 3 times 5.5 = 16.5 square meters

How many square meters in a area 3m by 5.5m?

Description : How many square meters in a area 3m by 5.5m?

Last Answer : It is 3 times 5.5 = 16.5 square meters

Find the Lorentz force of a charge 2.5C having an electric field of 5 units and magnetic field of 7.25 units with a velocity 1.5m/s. a) 39.68 b) 68.39 c) 86.93 d) 93.68

Description : Find the Lorentz force of a charge 2.5C having an electric field of 5 units and magnetic field of 7.25 units with a velocity 1.5m/s. a) 39.68 b) 68.39 c) 86.93 d) 93.68

Last Answer : a) 39.68

Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 6m. a) 17/6 b) -17/6 c) 13/6 d) -13/6

Description : Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 6m. a) 17/6 b) -17/6 c) 13/6 d) -13/6

Last Answer : d) -13/6

Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ =-3 at R = 5m. Find the flux density at R = 4.5m. a) 4/4.5 b) 3/4.5 c) 2/4.5 d) 1/4.5

Description : Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ =-3 at R = 5m. Find the flux density at R = 4.5m. a) 4/4.5 b) 3/4.5 c) 2/4.5 d) 1/4.5

Last Answer : c) 2/4.5

Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 3m. a) 3 b) 10/3 c) 11/3

Description : Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 3m. a) 3 b) 10/3 c) 11/3 d) 4

Last Answer : b) 10/3

Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 1m. a) 0 b) 1 c) 2 d) 3

Description : Three charged cylindrical sheets are present in three spaces with σ = 5 at R = 2m, σ = - 2 at R = 4m and σ = -3 at R = 5m. Find the flux density at R = 1m. a) 0 b) 1 c) 2 d) 3

Last Answer : a) 0

Which one of the following parameters is accurate for DGPS? (A) Positional accuracies ~ 1 - 2 m if rover is less than 1-2 km from the reference station (B) Positional accuracies ~ 2 - 5m if rover is less than 2-5 fm from the reference station (C) Positional accuracies ~ 5 - 10 m if rover is less than 5-10 km from reference station (D) Positional accuracies ~ 5 - 10 m if rover is less than 25 km

Description : Which one of the following parameters is accurate for DGPS? (A) Positional accuracies ~ 1 - 2 m if rover is less than 1-2 km from the reference station (B) Positional accuracies ~ 2 - 5m if rover is ... -10 km from reference station (D) Positional accuracies ~ 5 - 10 m if rover is less than 25 km

Last Answer : Answer: Option A

If the length of an intermediate span of a continuous slab is 5m, the length of the end span is kept (A) 4.5 m (B) 4.0 m (C) 3.5 m (D) 3.0 m

Description : If the length of an intermediate span of a continuous slab is 5m, the length of the end span is kept (A) 4.5 m (B) 4.0 m (C) 3.5 m (D) 3.0 m

Last Answer : Answer: Option A

If the size of panel in a flat slab is 6 m × 6 m, then as per Indian Standard Code, the widths of column strip and middle strip are (A) 3.0 m and 1.5 m (B) 1.5 m and 3.0 m (C) 3.0 m and 3.0 m (D) 1.5 m and 1.5m

Description : If the size of panel in a flat slab is 6 m × 6 m, then as per Indian Standard Code, the widths of column strip and middle strip are (A) 3.0 m and 1.5 m (B) 1.5 m and 3.0 m (C) 3.0 m and 3.0 m (D) 1.5 m and 1.5 m

Last Answer : Answer: Option C

A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s.  a. 267 kg/s  b. 378 kg/s  c. 375 kg/s  d. 456.5 kg/s m = Aν/V

Description : A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s.  a. 267 kg/s  b. 378 kg/s  c. 375 kg/s  d. 456.5 kg/s m = Aν/V

Last Answer : 375 kg/s

A flag staff 17.5 m high casts a shadow of length 40.25m. What will be the height of a building, which casts a shadow of length 28.75m under similar conditions? a) 14m b) 11.4m c) 13.5m d) 12.5 m

Description : A flag staff 17.5 m high casts a shadow of length 40.25m. What will be the height of a building, which casts a shadow of length 28.75m under similar conditions? a) 14m b) 11.4m c) 13.5m d) 12.5 m

Last Answer : d) 12.5 m

enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m

Description : enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m

Last Answer : (a) 1.5-3.0m

A railway wagon moving with a speed of 1.5m/s is brought to rest by bumper consisting of two springs. Mass of wagon is 100kg. The springs are compressed by 125mm. Calculate the maximum force acting on each spring. a) 1200N b) 1500N c) 1800N d) 2000N

Description : A railway wagon moving with a speed of 1.5m/s is brought to rest by bumper consisting of two springs. Mass of wagon is 100kg. The springs are compressed by 125mm. Calculate the maximum force acting on each spring. a) 1200N b) 1500N c) 1800N d) 2000N

Last Answer : c) 1800N

How much dirt is in a hole that was dug 5m deep and 6m wide? -Riddles

Description : How much dirt is in a hole that was dug 5m deep and 6m wide? -Riddles

Last Answer : There is no dirt because it was dug out.

Hameed has built a cubical water tank with lid for his house, with each other edge 1.5m long. -Maths 9th

Description : Hameed has built a cubical water tank with lid for his house, with each other edge 1.5m long. -Maths 9th

Last Answer : Edge of cubical tank = 1.5 m ∴ Area of 4 walls = 4 (side)² = 4(1.5)² m² = 4 x 225 = 9 m² Area of floor = (1.5)² = 2.25 m² ∴ Total surface area = 9 + 2.25 = 11.25 m² Edge of square tile = 25 m = 0.25 m² ∴ Area of 1 tile = (0.25)2 = .0625 m²

A cuboidal water tank is 6m long, 5m wide and 4.5m deep. How many litres of water can it hold? -Maths 9th

Description : A cuboidal water tank is 6m long, 5m wide and 4.5m deep. How many litres of water can it hold? -Maths 9th

Last Answer : Dimensions of a cuboidal water tank are: l = 6 m and b = 5 m and h = 4.5 m Formula to find volume of tank, V = l b h Put the values, we get V = (6 5 4.5) = 135 ... water, 135 m3volume hold = (135 1000) litres = 135000 litres Therefore, given cuboidal water tank can hold up to135000 litres of wate

Find (i) the lateral or curved surface area of a closed cylindrical petrol storage tank that is 4.2 m in diameter and 4.5m high. -Maths 9th

Description : Find (i) the lateral or curved surface area of a closed cylindrical petrol storage tank that is 4.2 m in diameter and 4.5m high. -Maths 9th

Last Answer : Height of cylindrical tank, h = 4.5m Radius of the circular end , r = (4.2/2)m = 2.1m (i) the lateral or curved surface area of cylindrical tank is 2πrh = 2 (22/7) 2.1 4.5 m2 = (44 0.3 ... ) = 87.12 m2 This implies, S = 95.04 m2 Therefore, 95.04m2 steel was used in actual while making such a tank.

The inner diameter of a circular well is 3.5m. It is 10m deep. Find (i) its inner curved surface area, (ii) the cost of plastering this curved surface at the rate of Rs. 40 per m2. -Maths 9th

Description : The inner diameter of a circular well is 3.5m. It is 10m deep. Find (i) its inner curved surface area, (ii) the cost of plastering this curved surface at the rate of Rs. 40 per m2. -Maths 9th

Last Answer : Inner radius of circular well, r = 3.5/2m = 1.75m Depth of circular well, say h = 10m (i) Inner curved surface area = 2πrh = (2 (22/7 ) 1.75 10) = 110 Therefore, the inner curved surface ... area = Rs (110 40) = Rs.4400 Therefore, the cost of plastering the curved surface of the well is Rs. 4400.

The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Description : The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Last Answer : longest pole can be faced along the diagonal and its length =102+102+52​=225​=15m

The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Description : The length of the longest pole that can be put in a room of dimensions (10m x 10m x 5m) is -Maths 9th

Last Answer : Solution of this question

The number of positive integral values of m satisfying the inequalities 8m + 35 > 75 and 5m + 18 < 53 is -Maths 9th

Description : The number of positive integral values of m satisfying the inequalities 8m + 35 > 75 and 5m + 18 < 53 is -Maths 9th

Last Answer : answer:

2.88 m + ___= 5m?

Description : 2.88 m + ___= 5m?

Last Answer : 7.88

5000cm greater than 5m?

Description : 5000cm greater than 5m?

Last Answer : Since 5000 cm converts to 50 m, 5000 cm is greater than 5 m.

The volume of 3 M `Ba(OH)^(2)` solution required to neutralize completely 120 mL of 1.5M `H_(3)PO_(4)` solution is :

Description : The volume of 3 M `Ba(OH)^(2)` solution required to neutralize completely 120 mL of 1.5M `H_(3)PO_(4)` solution is :

Last Answer : The volume of 3 M `Ba(OH)^(2)` solution required to neutralize completely 120 mL of 1.5M `H_(3)PO_(4)` solution is :

If 5M=3N, then M:N is____

Description : If 5M=3N, then M:N is____

Last Answer : If 5M=3N, then M:N is____

If `5m + 18 = 8`, then m = _____

Description : If `5m + 18 = 8`, then m = _____

Last Answer : If `5m + 18 = 8`, then m = _____

A current of `10` ampere is flowing in a wire of length `1.5m`. A force of `15 N` acts on it when it is placed in a uniform magnetic field of `2` tesl

Description : A current of `10` ampere is flowing in a wire of length `1.5m`. A force of `15 N` acts on it when it is placed in a uniform magnetic field of `2` tesl

Last Answer : A current of `10` ampere is flowing in a wire of length `1.5m`. A force of `15 N` acts on it when it is placed ... `45^(@)` C. `60^(@)` D. `90^(@)`

A conducting stick of length 2L and mass m is moving down a smooth inclined plane of inclination `60^(@)` with constant speed 5m/s. A current 2A is fl

Description : A conducting stick of length 2L and mass m is moving down a smooth inclined plane of inclination `60^(@)` with constant speed 5m/s. A current 2A is fl

Last Answer : A conducting stick of length 2L and mass m is moving down a smooth inclined plane of inclination `60^(@)` with ... )/(4L)` D. `(sqrt(3)mg)/(2L)`

A 1m long wire of diameter `0.31mm` has a resistance of `4.2 Omega`. If it is replaced by another wire of same material of length `1.5m` and diameter

Description : A 1m long wire of diameter `0.31mm` has a resistance of `4.2 Omega`. If it is replaced by another wire of same material of length `1.5m` and diameter

Last Answer : A 1m long wire of diameter `0.31mm` has a resistance of `4.2 Omega`. If it is replaced by another wire of ... 6 Omega` C. `26.7 Omega` D. `0.8 Omega`

What is the total of 3.8m and 0.5m in centimetres?

Description : What is the total of 3.8m and 0.5m in centimetres?

Last Answer : It is: 380cm plus 50cm = 430cm

What is 12.5m in centimeters?

Description : What is 12.5m in centimeters?

Last Answer : 1250 cm