Description : The cutter bar of a tractor operated mower ordinarily makes: A. Near the front axis B. 40mm towards the real axis C. At the power take off shaft D. Between the two lower Links
Last Answer : D. Between the two lower Links
Description : The cutter bar of a tractor operated mower ordinarily makes: A. 800-1200 strokes/min B. 1600-2000 strokes/min C. 2400-2800 strokes/min D. 3200-3600 strokes/min
Last Answer : A. 800-1200 strokes/min
Description : In vertical conveyor reaper, the crop to be harvested are guided by a) Star wheel b) Reel c) Row divider d) Cutter bar
Last Answer : Star wheel
Description : eripheral velocity of impact cutter is about: A.50m/sec B.20m/sec C.10m/sec D.5m/sec
Last Answer : A.50m/sec
Description : Speed of power operated machine chaff cutter is E. 35 rpm F. 50 rpm G. 600-1000 rpm H. None of the above
Last Answer : G. 600-1000 rpm
Description : Speed of band operated machines chaff cutter having two knives F. 35 rpm G. 50 rpm H. 600 rpm I. 1000 rpm
Last Answer : F. 35 rpm
Description : 267 .Double knives movers offers advantage over conventional mower are a)Double knife are dynamically balanced b) They can be operated at higher forward speeds then conventional mower c)They produce more uniform stubble height d)All of the above
Last Answer : d)All of the above
Description : The cutter bar of a tractor operated on owner makes strokes/min (a) 400 – 500 (b) 500 – 750 (c) 800 – 1200 (d) 1250 – 1500
Last Answer : (c) 800 – 1200
Description : Capacity of vertical conveyor reaper is A) 0.1-0.9 ha/h B) 10-20 ha/h C) 0.4-0.6 ha/h D) 1-2 ha/h
Last Answer : 0.4-0.6 ha/h
Description : knives of the cutter bar are scrratedin order to a)Increase the co-efficient of friction between crop stalk machine b)Reducing the deflection of stalk side ways c)To increase the cutting speed d)To improve cutting height
Last Answer : a)Increase the co-efficient of friction between crop stalk machine
Description : o over come the rear ward deflection the load given to outer end of the cutter bar is about..... (a)1.57cm/m (b) 2.0cm/m (b)3.0cm/m (d) 3.5cm/m
Last Answer : b) 2.0cm/m
Description : Speed of the cutter bar in case of combine (grain) is (a)400-550 rpm (b) 500-800rpm (c)800-1000rpm (d) 1000-1200rpm
Last Answer : a)400-550 rpm
Description : Vertical conveyor reaper is mostly used for paddy and………... b. Soybean c. Ground nut d. None of above
Last Answer : Ans- a. wheat
Description : is not well register, there is unbalance load, uneven harvesting and exclusive clogging of crops on the knife A) Vertical conveyor reaper B) MOVER C) Reaper binder D) Potato digger elevator.
Last Answer : MOVER
Description : .An olpad thresher is operated (A) Manually (B)By a pair of Bullocks (C)By a tractor (D)By an electric motor
Last Answer : (B)By a pair of Bullocks
Description : Flooding nozzles are generally operated with (a) Axis vertical (b) Axis horizontal (c) Inclined (d) None of the above
Last Answer : (a) Axis vertical
Description : The minimum cushion specified over an arch bridge is -- a) 0.5m b) 0.9m c) 1.0m* d) 1.2 m
Last Answer : c) 1.0m*
Description : Harvesting of wheat with bullock drawn reaper and making bundles could require a) 2 persons b) 3 persons c) 4 persons d) 5 person
Last Answer : a) 2 persons
Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc
Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.
Description : Reaper is used for a.) Plowing b.) Harvesting and threshing. c.) Cutting crops. d.) Cutting and windrow.
Last Answer : d.) Cutting and windrow.
Description : A reaper used for : a. Cutting crop b. Cutting and windrewing c. Cutting and threshing d. None of these
Last Answer : b. Cutting and windrewing
Description : Diminishing returns for a single year on TQM budgets become noticeable at a. $3.0M. b. $1.5M. c. $2.0M. d. $5.0M. e. $1.0M.
Last Answer : c. $2.0M.
Description : .The number of knives on powered chaff cutter a) 2-6 b) 1-2 c) 5-10 d) 10-20
Last Answer : a) 2-6
Description : Cutting speed of the impact type cutter is a)10-20 m/s. b)20-40m/s c)40-50m/s. d)46-56m/s
Last Answer : b)20-40m/s
Description : Capacity of field choppers (chaff cutter) is affected by.... (a) Capacity of the feed mechanism (cross-sectional area) (b) Rate of advance of material through throat considered as to be same linear speed of feed mechanism (c) Density of forage material (d) All of the above
Last Answer : (d) All of the above
Description : nging the speed of feed mechanism (b) The number of knives on feed mechanism (c) Changing speed of cutter head (d) All of the above
Description : The implement which can work in offset position a)offset disc harrow b) mower c) both (a) and (b) d) none of the above
Last Answer : c) both (a) and (b)
Description : The purpose of registration in a mower is (A) to get uniform length of cut of grass (B)to run the mower at minimum power (C)to run the mower at uniform torque (D)to reduce the occurrence of overload
Last Answer : (B)to run the mower at minimum power
Description : Crank speed on the mower with dynamically balanced systems a)850-1000rpm. b)1000-1200rpm c)850-1150rpm. d)1200-1600rpm
Last Answer : b)1000-1200rpm
Description : rank speed on the mower with conventional pit man drive is a)850-1000 rpm b)1000-1200rpm c)800-1150rpm d)1200-1600 rpm
Last Answer : a)850-1000 rpm
Description : A Tillage implement moving at a constant velocity is subjected to a) Force of gravity b) Soil force (resistance) c) Pull of mower d) All of the above
Last Answer : d) All of the above
Description : Normal consumption of fuep in ltrs/hr. by a 35hp tractor is (A) 2.5 (B)3.0 (C)3.5 (D)4
Last Answer : (B)3.0
Description : power spray are operated at a pressure. a. 5-10 kg/m2 b.10-20 kg/m2 c.20-55 kg/m2 d.>55 kg/m2
Last Answer : c.20-55 kg/m2
Description : The average working speed of a hand operated chaff fitted with two knives is _________ rev/min.
Last Answer : 35
Description : Optimum operating cylinder speed for wheat threshing using power operated thresher is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : d) 1100-1200rpm
Description : Optimum operating cylinder speed for the power operated maize sheller is a) 200-400rpm b) 400-600rpm c) 600-800rpm d) 1000-1200rpm
Last Answer : c) 600-800rpm
Description : Hand operated sprayer are operated at a pressure (kg/cm2) a) 1-7 b) 7-10 c)10-20 d) 20-55
Last Answer : a) 1-7
Description : subsoilers are operated at maximum depth of: A.30-40cm B.45-75cm C.75-90cm D.10-20cm
Last Answer : B.45-75cm
Description : Recommended capacity of the seed box or hopper for manually operated seeder is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit
Last Answer : a. 2-10 lit
Description : Operating pressure of power operated sprayer E. 1-7 kg/cm2 F. 10-20 kg/cm2+ G. 20-55 kg/cm2 H. >55 kg/cm2
Last Answer : G. 20-55 kg/cm2
Description : Operating pressure of the hand operated sprayer is E. 20-55 kg/cm2 F. 1-7 kg/cm2 G. 10-20 kg/cm2 H. >55 kg/cm2
Last Answer : F. 1-7 kg/cm2
Description : Differential lock offers advantage of E. Threshing efficiency of thresher (power operated) F. Capacity of chaff cutters G. Cleaning capacity of straw walkers H. None of the above
Last Answer : F. Capacity of chaff cutters
Description : Suggested or recommended difference in mass to power ratio between ballasted and unballasted tractor is of the order a)10kg/PTO KW b)6kg/PTO kw c)20kg/PTO kw d)30kg/PTO kw
Last Answer : b)6kg/PTO kw
Description : Formula for adding weight (ballast) on tractor tyres working in loose wet soil for good traction a)(km/hr × kg/PTO kw)=540 b)( km/hr × kg/PTO kw)=670 c)( km/hr × kg/PTO HP)=540 d)( km/hr × kg/PTO HP)=670
Last Answer : a)(km/hr × kg/PTO kw)=540
Description : Swinging drawbar is advantageous because it help A. Taking short turn with machine wider than the tractor B. Reduces side draft C. Leaves only small area uncovered at corner of the fied D. All the above
Last Answer : A. Taking short turn with machine wider than the tractor
Description : .Increase length of a land slide of a one bottom right hand mould board plough will a) Increase the amount of offset on tractor b) Decrease the amount of offset c) No affect d) Affect Completely
Last Answer : c) No affect
Description : ASPEE are famous for manufacturing: a) Tractor b) Power tillers c) Ploughs d) Sprayers
Last Answer : d) Sprayers
Description : The first tractor plant in india was set up by : A)hindustan b)hmt C)eicher d)ford
Last Answer : C)eicher
Description : the time taken to plough one acre farm with 35 hp tractor is : A)60 minutes b)75 minutes C)90 minutes d)120 minutes
Last Answer : b)75 minutes
Description : which of the following tractor has the cair cooled engine? A)ford b)eicher C)international d)hmt
Last Answer : b)eicher