If the size of panel in a flat slab is 6 m × 6 m, then as per Indian Standard Code, the widths of column strip and middle strip are (A) 3.0 m and 1.5 m (B) 1.5 m and 3.0 m (C) 3.0 m and 3.0 m (D) 1.5 m and 1.5m

If the size of panel in a flat slab is 6 m × 6 m, then as per Indian Standard Code, the widths of
column strip and middle strip are
(A) 3.0 m and 1.5 m
(B) 1.5 m and 3.0 m
(C) 3.0 m and 3.0 m
(D) 1.5 m and 1.5 m
by

1 Answer

Answer :

Answer: Option C
by

Related questions

The effective width of a column strip of a flat slab, is (A) One-fourth the width of the panel (B) Half the width of the panel (C) Radius of the column (D) Diameter of the column

Description : The effective width of a column strip of a flat slab, is (A) One-fourth the width of the panel (B) Half the width of the panel (C) Radius of the column (D) Diameter of the column

Last Answer : Answer: Option B

If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than (A) WL/12 (L - 2D/3)² (B) WL/10 (L + 2D/3)² (C) WL/10 (L - 2D/3)² (D) WL/12 (L - D/3)²

Description : If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span ... (L + 2D/3)² (C) WL/10 (L - 2D/3)² (D) WL/12 (L - D/3)²

Last Answer : Answer: Option C

Thickened part of a flat slab over its supporting column, is technically known as (A) Drop panel (B) Capital (C) Column head (D) None of these

Description : Thickened part of a flat slab over its supporting column, is technically known as (A) Drop panel (B) Capital (C) Column head (D) None of these

Last Answer : Answer: Option A

Enlarged head of a supporting column of a flat slab is technically known as (A) Supporting end of the column (B) Top of the column (C) Capital (D) Drop panel

Description : Enlarged head of a supporting column of a flat slab is technically known as (A) Supporting end of the column (B) Top of the column (C) Capital (D) Drop panel

Last Answer : Answer: Option C

Critical section for shear in case of flat slabs is at a distance of (A) Effective depth of slab from periphery of column/drop panel (B) d/2 from periphery of column/capital/ drop panel (C) At the drop panel of slab (D) At the periphery of column

Description : Critical section for shear in case of flat slabs is at a distance of (A) Effective depth of slab from periphery of column/drop panel (B) d/2 from periphery of column/capital/ drop panel (C) At the drop panel of slab (D) At the periphery of column

Last Answer : Answer: Option B

If the length of an intermediate span of a continuous slab is 5m, the length of the end span is kept (A) 4.5 m (B) 4.0 m (C) 3.5 m (D) 3.0 m

Description : If the length of an intermediate span of a continuous slab is 5m, the length of the end span is kept (A) 4.5 m (B) 4.0 m (C) 3.5 m (D) 3.0 m

Last Answer : Answer: Option A

The diameter of the column head support a flat slab, is generally kept (A) 0.25 times the span length (B) 0.25 times the diameter of the column (C) 4.0 cm larger than the diameter of the column (D) 5.0 cm larger than the diameter of the column

Description : The diameter of the column head support a flat slab, is generally kept (A) 0.25 times the span length (B) 0.25 times the diameter of the column (C) 4.0 cm larger than the diameter of the column (D) 5.0 cm larger than the diameter of the column

Last Answer : Option A

According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is (A) Half of the width of the slab (B) Two-third of the width of the slab (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Description : According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each direction into middle strips and edge strips such that the width of the middle strip, is ... (C) Three-fourth of the width of the slab (D) Four-fifth of the width of the slab

Last Answer : Answer: Option C

what- A photographer likes to do special effects on his digital pictures by resizing his prints to non-standard lengths.For which size prints are the lengths and widths proportional?

Description : what- A photographer likes to do special effects on his digital pictures by resizing his prints to non-standard lengths.For which size prints are the lengths and widths proportional?

Last Answer : 4 in, by 5 in

Does a wall oven come in a standard size or different sized widths?

Description : Does a wall oven come in a standard size or different sized widths?

Last Answer : They do with the most predominate sizes being 24", 27" and 30". The size that is widely used is 30".

A this usual rowing rate, Mohit can travel 12 miles downstream in a certain river in 6 hours less than it takes him to travel the same distance upstream. But if he could double his usual rowing rate for his 24 miles round trip, the downstream 12 miles would then take only one hour less than the upstream 12 miles. What is the speed of the current in miles per hour? A.2.5m/hr B.4 m/hr C.8/3 m/hr D. 5/3m/hr

Description : A this usual rowing rate, Mohit can travel 12 miles downstream in a certain river in 6 hours less than it takes him to travel the same distance upstream. But if he could double his usual rowing rate for his 24 miles round trip, ... current in miles per hour? A.2.5m/hr B.4 m/hr C.8/3 m/hr D. 5/3m/hr

Last Answer : Answer-C Basic Formula: Speed of the stream = ½ (a-b) km/hr Explanation: Let the speed in still water be x m/hr Speed of stream be y m/hr Then, speed upstream = x-y m/hr and Speed downstream = x+y m/hr 12/x-y - ... 1] 3y^2 = 8 y so, y = 8/3 speed of the current = 8/3 m/hr = 2 (2/3) m/hr

Codes consisting of lines of varying widths or lengths that arecomputer-readable are known as– (A) an ASCII code (B) a magnetic tape (C) an OCR scanner (D) a bar code (E) None of these

Description : Codes consisting of lines of varying widths or lengths that arecomputer-readable are known as– (A) an ASCII code (B) a magnetic tape (C) an OCR scanner (D) a bar code (E) None of these

Last Answer : a bar code

Codes consisting of lines of varying widths or lengths that are computer - readable are known as _______: a) an ASCII code b) a magnetic tape c) an OCR scanner d) a bar code e) None of The Above

Description : Codes consisting of lines of varying widths or lengths that are computer - readable are known as _______: a) an ASCII code b) a magnetic tape c) an OCR scanner d) a bar code e) None of The Above

Last Answer : d) a bar code

Codes consisting or Bars or lines of varying widths or lengths that are computer-readable are known as- 1) A bar code 2) An ASCII Code 3) A Magnetic Tape 4) A Light Pen

Description : Codes consisting or Bars or lines of varying widths or lengths that are computer-readable are known as- 1) A bar code 2) An ASCII Code 3) A Magnetic Tape 4) A Light Pen

Last Answer : 1) A bar code

If a is the optimistic time, b is the pessimistic time and m is most likely time of an activity, the expected time of the activity, is (A) (a + m + b)/6 (B) (a + 2m + b)/6 (C) (a + 4m + b)/6 (D) (a + 5m + b)/6

Description : If a is the optimistic time, b is the pessimistic time and m is most likely time of an activity, the expected time of the activity, is (A) (a + m + b)/6 (B) (a + 2m + b)/6 (C) (a + 4m + b)/6 (D) (a + 5m + b)/6

Last Answer : (C) (a + 4m + b)/6

For a continuous slab of 3 m × 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (A) 50 mm (B) 75 mm (C) 100 mm (D) 120 mm

Description : For a continuous slab of 3 m × 3.5 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (A) 50 mm (B) 75 mm (C) 100 mm (D) 120 mm

Last Answer : (B) 75 mm

State the requirement of good form work and state the stripping time of form work as per IS 456-2000. i) Slab ii) Beam iii) Column with labelling on sketch.

Description : State the requirement of good form work and state the stripping time of form work as per IS 456-2000. i) Slab ii) Beam iii) Column with labelling on sketch.

Last Answer : Requirement of good form work: 1. It should be strong enough to resist the weight of concrete, workers and machinery. 2. It should be economical compared to total cost of construction. 3. It should be possible ... arch of span more than 6m - 21 days iii) Column: Vertical formwork - 16 to 24 hours

A flat slab is supported (A) On beams (B) On columns (C) On beams and columns (D) On columns monolithically built with slab

Description : A flat slab is supported (A) On beams (B) On columns (C) On beams and columns (D) On columns monolithically built with slab

Last Answer : Answer: Option D

The minimum thickness of a flat slab is taken (A) L/32 for end panels without drops (B) L/36 for end panels without drops (C) L/36 for interior panels without drop (D) All the above

Description : The minimum thickness of a flat slab is taken (A) L/32 for end panels without drops (B) L/36 for end panels without drops (C) L/36 for interior panels without drop (D) All the above

Last Answer : Answer: Option D

A reinforcing slab, build monolithically with the supporting columns and is reinforced in two or more directions, without any provision of beams is called a (a) Two way slab (b) Flat slab (c) Continus slab (d) Cireulashion

Description : A reinforcing slab, build monolithically with the supporting columns and is reinforced in two or more directions, without any provision of beams is called a (a) Two way slab (b) Flat slab (c) Continus slab (d) Cireulashion

Last Answer : (b) Flat slab

Reinforced concrete slab supported only on columns is said to be [ A ] Rigid slab [ B ] Flat slab [ C ] Both(a) and (b) [ D ] None of the above.

Description : Reinforced concrete slab supported only on columns is said to be [ A ] Rigid slab [ B ] Flat slab [ C ] Both(a) and (b) [ D ] None of the above.

Last Answer : [ B ] Flat slab

For a continuous slab of 3 m x 35 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (a) 120 mm (b) 100 mm (c) 75 mm (d) 50 mm

Description : For a continuous slab of 3 m x 35 m size, the minimum overall depth of slab to satisfy vertical deflection limits is (a) 120 mm (b) 100 mm (c) 75 mm (d) 50 mm

Last Answer : (a) 120 mm

Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of the column (C) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Description : Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of ... ) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Last Answer : Answer: Option C

Minimum clear cover (in mm) to the main steel bars in slab, beam, column and footing respectively, are (a) 10, 15, 20 and 25 (b) 15, 25, 40 and 75 (c ) 20, 25, 30 and 40 (d) 20, 35, 40 and 75

Description : Minimum clear cover (in mm) to the main steel bars in slab, beam, column and footing respectively, are (a) 10, 15, 20 and 25 (b) 15, 25, 40 and 75 (c ) 20, 25, 30 and 40 (d) 20, 35, 40 and 75

Last Answer : (b) 15, 25, 40 and 75

Flats belts are available in various widths ranging from a) 1.0 to 50 cm b) 1.5 to 50 cm c) 2 to 50 cm d) 2.5 to 50 cm

Description : Flats belts are available in various widths ranging from a) 1.0 to 50 cm b) 1.5 to 50 cm c) 2 to 50 cm d) 2.5 to 50 cm

Last Answer : d) 2.5 to 50 cm

Which one of the following parameters is accurate for DGPS? (A) Positional accuracies ~ 1 - 2 m if rover is less than 1-2 km from the reference station (B) Positional accuracies ~ 2 - 5m if rover is less than 2-5 fm from the reference station (C) Positional accuracies ~ 5 - 10 m if rover is less than 5-10 km from reference station (D) Positional accuracies ~ 5 - 10 m if rover is less than 25 km

Description : Which one of the following parameters is accurate for DGPS? (A) Positional accuracies ~ 1 - 2 m if rover is less than 1-2 km from the reference station (B) Positional accuracies ~ 2 - 5m if rover is ... -10 km from reference station (D) Positional accuracies ~ 5 - 10 m if rover is less than 25 km

Last Answer : Answer: Option A

To prevent segregation the concrete should to be thrown from a height of more than. (a) ½ m (b) 1m (c) 1.5m (d) 2m

Description : To prevent segregation the concrete should to be thrown from a height of more than. (a) ½ m (b) 1m (c) 1.5m (d) 2m

Last Answer : (b) 1m

If the ratio of long and short spans of a two way slab with corners held down is r, the actual reduction of B.M. is given by (A) (5/6) (r/1 + r²) M (B) (5/6) (r²/1 + r²) M (C) (5/6) (r²/1 + r3 ) M (D) (5/6) (r²/1 + r4 ) M

Description : If the ratio of long and short spans of a two way slab with corners held down is r, the actual reduction of B.M. is given by (A) (5/6) (r/1 + r²) M (B) (5/6) (r²/1 + r²) M (C) (5/6) (r²/1 + r3 ) M (D) (5/6) (r²/1 + r4 ) M

Last Answer : Answer: Option D

The reinforcement in a continuous slab is provided (a) At the top of the slab portion over the intermediate supports. (b) At the bottom of the slab portion over the intermediate supports. (c) All the middle of the slab portion over the intermediate supports (d) All the above

Description : The reinforcement in a continuous slab is provided (a) At the top of the slab portion over the intermediate supports. (b) At the bottom of the slab portion over the intermediate supports. (c) All the middle of the slab portion over the intermediate supports (d) All the above

Last Answer : (a) At the top of the slab portion over the intermediate supports.

A reinforced concrete slab is 75 mm thick. The maximum size of reinforcement bar that can be used is (a) 6 mm diameter (b) 8 mm diameter (c) 10 mm diameter (d) 12 mm diameter

Description : A reinforced concrete slab is 75 mm thick. The maximum size of reinforcement bar that can be used is (a) 6 mm diameter (b) 8 mm diameter (c) 10 mm diameter (d) 12 mm diameter

Last Answer : (b) 8 mm diameter

If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm

Description : If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is (A) 200 cm (B) 300 cm (C) 150 cm (D) 100 cm

Last Answer : Answer: Option C

The size of the mesh at each corner meant for torsion reinforcement in a rectangular slab of size (Lx ´ Ly) is Lx = shorter span Lx = Longer span [ A ] 0.1 Ly x 1 Ly [ B ] 0.2 Ly x 0.2 Ly [ C ] 0.1 Lx x 0.1 Lx [ D ] 0.2 Lx x 0.2 Lx

Description : The size of the mesh at each corner meant for torsion reinforcement in a rectangular slab of size (Lx ´ Ly) is Lx = shorter span Lx = Longer span [ A ] 0.1 Ly x 1 Ly [ B ] 0.2 Ly x 0.2 Ly [ C ] 0.1 Lx x 0.1 Lx [ D ] 0.2 Lx x 0.2 Lx

Last Answer : [ D ] 0.2 Lx x 0.2 Lx

IPCC stands for: a. Indian Penal and Criminal Code b. International Peoples Consortium for Climate Change c. Intergovernmental Panel for Climate Change d. International Panel for Climate Change

Description : IPCC stands for: a. Indian Penal and Criminal Code b. International Peoples Consortium for Climate Change c. Intergovernmental Panel for Climate Change d. International Panel for Climate Change

Last Answer : d. International Panel for Climate Change

If 5M=3N, then M:N is____

Description : If 5M=3N, then M:N is____

Last Answer : If 5M=3N, then M:N is____

If `5m + 18 = 8`, then m = _____

Description : If `5m + 18 = 8`, then m = _____

Last Answer : If `5m + 18 = 8`, then m = _____

The volume (in ml) of 0.5 M NaOH required for the complete reaction with 150 ml of 1.5M `H_(3)PO_(3)` solution is

Description : The volume (in ml) of 0.5 M NaOH required for the complete reaction with 150 ml of 1.5M `H_(3)PO_(3)` solution is

Last Answer : The volume (in ml) of 0.5 M NaOH required for the complete reaction with 150 ml of 1.5M `H_(3)PO_(3)` solution is A. 1350 B. 900 C. 1250 D. 1150

A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s.  a. 267 kg/s  b. 378 kg/s  c. 375 kg/s  d. 456.5 kg/s m = Aν/V

Description : A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s.  a. 267 kg/s  b. 378 kg/s  c. 375 kg/s  d. 456.5 kg/s m = Aν/V

Last Answer : 375 kg/s

If the atmospheric pressure on the surface of an oil tank (sp. gr. 0.8) is 0.2 kg/cm", the pressure at a depth of 50 m below the oil surface will be (A) 2 meters of water column (B) 3 meters of water column (C) 5 meters of water column (D) 6 meters of water Column

Description : If the atmospheric pressure on the surface of an oil tank (sp. gr. 0.8) is 0.2 kg/cm", the pressure at a depth of 50 m below the oil surface will be (A) 2 meters of water column (B) 3 meters of water column (C) 5 meters of water column (D) 6 meters of water Column

Last Answer : Answer: Option D

The minimum cushion specified over an arch bridge is -- a) 0.5m b) 0.9m c) 1.0m* d) 1.2 m

Description : The minimum cushion specified over an arch bridge is -- a) 0.5m b) 0.9m c) 1.0m* d) 1.2 m

Last Answer : c) 1.0m*

What's the difference between wide screen and flat panel HDTVs?

Description : What's the difference between wide screen and flat panel HDTVs?

Last Answer : I don’t think there’s a distinction between those two. They are independent. All LDC TVs are flat screen. Most are wide screen too. One has nothing to do with the other.

Where can I get a flat panel TV on the Cheap?

Description : Where can I get a flat panel TV on the Cheap?

Last Answer : answer:www.craigslist.com --though you want to do some research on exact models to make sure you're not getting ripped off. I work at Micro Center you can find pretty cheap TV's there too .42 in for ... -rate the difference on the warranty and they can keep it. If you need any more help let me know.

What are 2 things you should use to clean a flat panel LCD screen?

Description : What are 2 things you should use to clean a flat panel LCD screen?

Last Answer : A soft, slightly damp cloth is really all you need. Screensrarely get to the stage where you need to use cleaningproducts.

Can I trust my flat panel TV to show 1080p if its date of manufacture is within the past two years?

Description : Can I trust my flat panel TV to show 1080p if its date of manufacture is within the past two years?

Last Answer : If you want a 1080p tv you have to buy one which is capable of it. These have been made for several years, but just because a tv is new has no bearing on it's specifications.

What is the typical cost for a flat panel tv that is between 32 and 52 inches?

Description : What is the typical cost for a flat panel tv that is between 32 and 52 inches?

Last Answer : Searches in the internet show that the cost of a 32 inches flat panel tv can be in the range of $350-750; however, there are good models 32" flat panel TVs of popular brands available at around $450; ... however, you should be able to get a good brand of typical 52" flat panel TV at around $1200.

How much does it cost to repair a flat panel television?

Description : How much does it cost to repair a flat panel television?

Last Answer : The cost of repair for a flat panel television varies by company. The cost also depends on the problems that are found on the television and the parts required for repair. The cost to replair a flat ... on what parts you need replaced. It also depends on who is fixing it and their repair rates.

Is a flat panel television better than a big screen?

Description : Is a flat panel television better than a big screen?

Last Answer : A flat panel television and a big screen television are not necessarily mutually exclusive. You can have a flat panel big screen television, which is the best television of all.

Will the Dynex Coaxial-to-RCA Connector Adapter work with my 32" RCA Flat Panel TV?

Description : Will the Dynex Coaxial-to-RCA Connector Adapter work with my 32" RCA Flat Panel TV?

Last Answer : Yes, absolutely. Any television with RCA style inputs can be used with this adapter, including LCD's, Plasma, projections, and even CRT.

Sony Bravia V-Series KDL-40V5100 40 in. 1080p LCD Flat Panel HDTV compatible with a Mac TV?

Description : Sony Bravia V-Series KDL-40V5100 40 in. 1080p LCD Flat Panel HDTV compatible with a Mac TV?

Last Answer : Assuming you mean an Apple Mac TV, Apple does not make televisions. Otherwise are you looking for Apple TV compatibility, or a Mac TV tuner?

Where can I find flat panel TV reviews?

Description : Where can I find flat panel TV reviews?

Last Answer : Reviews for flat panel television sets can be found in a number of places. One great place to check would be consumer websites such as Amazon or Best Buy. You can also try services like Consumer Reports.