Among the voltages to various electrodes in a CRT the voltage is the highest on

by

1 Answer

Answer :

Among the voltages to various electrodes in a CRT the voltage is the highest on PD anode.

by

Related questions

What is the voltage of an electrolytic cell copper and magnesium electrodes?

Description : What is the voltage of an electrolytic cell copper and magnesium electrodes?

Last Answer : -2.71 V

The voltages across various discs of suspension insulators having identical discs are different due to:

Description : The voltages across various discs of suspension insulators having identical discs are different due to:  (A) Surface leakage currents  (B) Series capacitance of lines  (C) Shunt capacitance to ground  (D) Series and shunt capacitances

Last Answer : The voltages across various discs of suspension insulators having identical discs are different due to: Shunt capacitance to ground 

When paralleling two alternators the synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. This indicates the ____________. A. alternator voltages are 180° apart B. incoming alternator is running too fast C. incoming alternator is in phase with the bus voltage D. synchroscope pointer is defective or broken

Description : When paralleling two alternators the synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. This indicates the ____________. A. alternator voltages ... alternator is in phase with the bus voltage D. synchroscope pointer is defective or broken

Last Answer : Answer: C

One important difference between wye-connected and delta-connected generators is that delta connections have ____________. A. line voltages equal to the vector sum of the phase voltages B. phase voltages 90° out of sync C. line current equal to the phase current D. line voltage equal to the phase voltage

Description : One important difference between wye-connected and delta-connected generators is that delta connections have ____________. A. line voltages equal to the vector sum of the phase voltages B. phase voltages 90° ... C. line current equal to the phase current D. line voltage equal to the phase voltage

Last Answer : Answer: D

At high discharge rates, nickel-cadmium storage batteries are superior to lead-acid batteries because they __________. A. require fewer cells for the same voltage and less mounting space B. are able to produce higher voltages and do not have to be charged as often C. can be charged and discharged many times without much damage D. have no individual cells to replace at the end of useful life

Description : At high discharge rates, nickel-cadmium storage batteries are superior to lead-acid batteries because they __________. A. require fewer cells for the same voltage and less mounting space B. are able to ... times without much damage D. have no individual cells to replace at the end of useful life

Last Answer : Answer: C

AC and DC generators are similar in that they _____________. A. both generate alternating voltages B. both rectify the voltage before delivery C. are constructed at the same physical size for the same kilowatt rating D. both supply three-phase power

Description : AC and DC generators are similar in that they _____________. A. both generate alternating voltages B. both rectify the voltage before delivery C. are constructed at the same physical size for the same kilowatt rating D. both supply three-phase power

Last Answer : Answer: A

Which of the following statements is true concerning simple parallel resistance circuits? A. The total current flow equals the sum of the individual currents. B. The total current flow equals the reciprocal of the sum of the individual currents. C. The total resistance equals the sum of the individual resistance. D. The total voltage equals the sum of the individual voltages across each resistance.

Description : Which of the following statements is true concerning simple parallel resistance circuits? A. The total current flow equals the sum of the individual currents. B. The total current flow equals the ... resistance. D. The total voltage equals the sum of the individual voltages across each resistance.

Last Answer : Answer: A

Which of the following statements concerning a simple parallel resistance circuit is correct? A. The voltage drop across each resistor is the same. B. The total current flow equals the reciprocal of the sum of the individual currents. C. The total resistance equals the sum of the individual resistances. D. The total voltage equals the sum of the individual voltages across each resistance.

Description : Which of the following statements concerning a simple parallel resistance circuit is correct? A. The voltage drop across each resistor is the same. B. The total current flow equals the reciprocal ... resistances. D. The total voltage equals the sum of the individual voltages across each resistance.

Last Answer : Answer: A

At 100% modulation, the sum fo the effective voltages in both sidebands is equal to ______% of the unmodulated carrier voltage. A. 50 B. 71 C. 100 D. 25

Description : At 100% modulation, the sum fo the effective voltages in both sidebands is equal to ______% of the unmodulated carrier voltage. A. 50 B. 71 C. 100 D. 25

Last Answer : B. 71

When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease (which one) in the resistance of the regulating device.

Description : When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease (which one) in the resistance of the regulating device.

Last Answer : An increase.

When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease in the resistance of the regulating device.

Description : When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease in the resistance of the regulating device.

Last Answer : Increase.

If the load requirement consists of both positive and negative voltages, what technique is used in the voltage divider to supply the loads from a single voltage source?

Description : If the load requirement consists of both positive and negative voltages, what technique is used in the voltage divider to supply the loads from a single voltage source?

Last Answer : The ground (reference point) is placed in the proper point in the voltage divider so that positive and negative voltages are supplied

What is the relationship of the voltage at C in figure 3-7 to the voltages at A and B?

Description : What is the relationship of the voltage at C in figure 3-7 to the voltages at A and B?

Last Answer : C is 1.414 times greater than A or B.

Between the branch voltages of a loop the Kirchhoff s voltage law imposes?

Description : Between the branch voltages of a loop the Kirchhoff s voltage law imposes?

Last Answer : Between the branch voltages of a loop the Kirchhoff s voltage law imposes linear constraints.

Various adjustments in an energy meter include

Last Answer :  Various adjustments in an energy meter include light load or friction, lag and creep, overload and voltage compensation.

When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes are

Description : When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes are

Last Answer : When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes ... "),("Pure Zinc","ImPure Zinc"):}`

Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Description : Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Last Answer : Brine is electrolysed by using inert electrodes. The reaction at anode is_______ A. `Cl^(-)(aq.)rarr(1)/(2)Cl_(2) ... )H_(2)(g),E_("cell")^(o.)=0.00V`

When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are :

Description : When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are :

Last Answer : When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are ... 4)","Impure zinc","Impure sample"):}`

Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Description : Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Last Answer : Brine is electrolysed by using inert electrodes. The reaction at anode is_______ A. `Cl^(-)(aq)to(1)/(2)Cl_(2 ... 2)H_(2)(g), E_(Cell)^(otimes)=0.00V`

In what situation might in be better to position the electrodes on the upper arm and the thighs rather than lower on the arms and legs?

Description : In what situation might in be better to position the electrodes on the upper arm and the thighs rather than lower on the arms and legs?

Last Answer : Need answer

What are the half-reactions for galvanic cell with Ni and Mg electrodes?

Description : What are the half-reactions for galvanic cell with Ni and Mg electrodes?

Last Answer : Ni2+(aq) + 2e- Ni(s) and Mg(s) Mg2+(aq) + 2e-

What is oxidized in galvanic cell made with silver and nickel electrodes?

Description : What is oxidized in galvanic cell made with silver and nickel electrodes?

Last Answer : The nickel metal(apex)

How to detect damp electrodes?

Description : How to detect damp electrodes?

Last Answer : Pre dry unusually damp electrodes for 30 - 45 minutes before final drying to minimize cracking of the coating that format.

The movement of charged particles towards one of the electrodes under the influence of electrical current is (A) Gel filtration (B) Molecular sieving (C) Gas liquid chromatography (D) Electrophoresis

Description : The movement of charged particles towards one of the electrodes under the influence of electrical current is (A) Gel filtration (B) Molecular sieving (C) Gas liquid chromatography (D) Electrophoresis

Last Answer : Answer : D

Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at eathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at eathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Last Answer : (1) Copper at eathode and oxygen at anode. Explanation: Copper is deposited at the cathode and is dissolved at the anode. Consequently the concentration of copper ions in solution remains constant. This can be used as a method of purification of copper as only pure copper is deposited at the cathode

Whic of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc.? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon

Description : Whic of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc.? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon

Last Answer : (2) Nickel and cadmium Explanation: A rechargeable battery, storage battery, or accumulator is a type of electrical battery. It comprises one or more electrochemical cells, and is a ... sizes, ranging from button cells to megawatt systems connected to stabilize an electrical distribution network.

Substance used for making electrodes is?

Description : Substance used for making electrodes is?

Last Answer : Graphite

Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Last Answer : (B) Manganese

What maintenance of earth electrodes should be done?

Description : What maintenance of earth electrodes should be done?

Last Answer : The neighbouring soil to the earth electrode shall be kept moist where necessary, by periodically pouring water through a pipe where fitted along with it or by pouring water in the immediate ... wherever available, shall be carried out to ensure their rigidity and other signs of deterioration. 

What is gap between the electrodes in transformer oil testing kit?

Description : What is gap between the electrodes in transformer oil testing kit?

Last Answer : 0.1 Inch.

A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent period is 1.5 ms. The intracellular electrode is 6 cm form the anode of the simulator and 4.5 cm from the cathode of the simulator. What is the conduction velocity of the axon. a. 15 m/s b. 30 m/s c. 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Description : A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent ... . 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Last Answer : 30 m/s

The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Description : The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Last Answer : (B) Flow of current through a heating element

An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace. (A) Resistance (B) Arc (C) Low frequency induction (D) None of these

Description : An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace. (A) Resistance (B) Arc (C) Low frequency induction (D) None of these

Last Answer : (B) Arc

Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres(B) As moth balls (insecticides)(C) As a fuel in furnaces(D) For making electrodes

Description : Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres (B) As moth balls (insecticides) (C) As a fuel in furnaces (D) For making electrodes

Last Answer : (C) As a fuel in furnaces

Anthracite can be used for (A) Recarbonising steel (B) Making carbon electrodes(C) Blending with highly coking coal to check its swelling which helps insaving coke even walls from damage and to produce high strength coke(D) All (A), (B) and (C)

Description : Anthracite can be used for (A) Recarbonising steel (B) Making carbon electrodes (C) Blending with highly coking coal to check its swelling which helps in saving coke even walls from damage and to produce high strength coke (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC

Description : Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC

Last Answer : (D) 60 KV DC

Coal tar is used as a (A) Binding material for coal briquettes (B) Fuel in rotary kiln (C) Binder in making carbon electrodes (D) All (A), (B) and (C)

Description : Coal tar is used as a (A) Binding material for coal briquettes (B) Fuel in rotary kiln (C) Binder in making carbon electrodes (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The emf of a Deniell cell “Zn | Zn2+|| Cu2+| Cu” can be increased by (A) Decreasing the surface area of the electrodes (B) Increasing the concentration of zinc sulphate solution (C) Increasing the surface area of the electrodes (D) Increasing the concentration of copper sulphate solution

Description : The emf of a Deniell cell “Zn | Zn2+|| Cu2+| Cu” can be increased by (A) Decreasing the surface area of the electrodes (B) Increasing the concentration of zinc sulphate solution (C) Increasing the surface area of the electrodes (D) Increasing the concentration of copper sulphate solution

Last Answer : (D) Increasing the concentration of copper sulphate solution

In electrical resistance welding, distortion results from the use of improper (A) Clamping methods (B) Electrodes (C) Current (D) Filler material

Description : In electrical resistance welding, distortion results from the use of improper (A) Clamping methods (B) Electrodes (C) Current (D) Filler material

Last Answer : (A) Clamping methods

Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Description : Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Last Answer : (B) Arc

Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the tip diameter should be equal to t (where, t = plate thickness to be welded) (C) In spot welding, two pieces to be joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Last Answer : (D) Mild steel sheet cannot be spot welded

Coating provided on the electrodes used in the arc welding is not expected to (A) Add alloying elements (B) Prevent electrode from contamination (C) Stabilise the arc (D) Provide protective atmosphere to weld

Description : Coating provided on the electrodes used in the arc welding is not expected to (A) Add alloying elements (B) Prevent electrode from contamination (C) Stabilise the arc (D) Provide protective atmosphere to weld

Last Answer : (B) Prevent electrode from contamination

TIG welding, thoriated tungsten electrodes are used, because it (A) Has higher current carrying capacity (B) Has better electron emissivity (C) Is stronger than ordinary tungsten (D) Is easy to prepare

Description : TIG welding, thoriated tungsten electrodes are used, because it (A) Has higher current carrying capacity (B) Has better electron emissivity (C) Is stronger than ordinary tungsten (D) Is easy to prepare

Last Answer : Option B

Circuit breakers are essentially (a) current carrying contacts called electrodes (b) arc extinguishers (c) circuits to break the system (d) transformers to isolate the two systems (e) any of the above

Description : Circuit breakers are essentially (a) current carrying contacts called electrodes (b) arc extinguishers (c) circuits to break the system (d) transformers to isolate the two systems (e) any of the above

Last Answer : (a) current carrying contacts called electrodes

Moving tube electrodes apart to decrease interelectrode capacitance causes an increase in the effect of what property?

Description : Moving tube electrodes apart to decrease interelectrode capacitance causes an increase in the effect of what property?

Last Answer : Transit time

Q-9 how many electrodes are used in the TANDEM SAW? What is the polarity of the both electrode?

Description : Q-9 how many electrodes are used in the TANDEM SAW? What is the polarity of the both electrode?

Last Answer : In TANDEM SAW process there are more than one electrode is used. But for first electrode alternative current and for second electrode direct current shall be used.

When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if they were in a sealed vacuum pack prior to use c) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use

Description : When welding medium carbon steel plates over 100mm in thickness would the basic electrodes require any pre treatment before use? a) None if they were in a vacuum pack opened 8 hours prior to use b) None if ... ) Heat to 500 °C for 2 hours if used outside d) Baked at 150°C for 4hours prior to use

Last Answer : b) None if they were in a sealed vacuum pack prior to use

Why it is sometimes necessary to preheat the base material before welding? a) To remove oil and grease b) To remove moisture from inside the material c) To prevent the possible risk of cracking d) Not required if using cellulosic electrodes as these will provide enough heat

Description : Why it is sometimes necessary to preheat the base material before welding? a) To remove oil and grease b) To remove moisture from inside the material c) To prevent the possible risk of cracking d) Not required if using cellulosic electrodes as these will provide enough heat

Last Answer : c) To prevent the possible risk of cracking