Please Log in or Register for more.


93 views

2 Answers

Answer :

No

Like 0 like

Answer :

Voltmeter is used to measure voltage in a circuit.Ohmmeter is used to measure the resistance of a component in a circuit.
Like 0 like

Please log in or register to answer this question.

Related Questions


An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be  (1) unaffected (2) decreased (3) increased (4) either decreased or increased depending on the direction of the DC field
Last Answer : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be either decreased or increased depending on the direction of the DC field

Show More

337 views 1 answer








Last Answer : To measure a resistance with the help of a potentiometer it is not necessary to standardise the potentiometer.

Show More

225 views 1 answer







Name the method used to measure following resistances:- (i) Low resistance (ii) Medium resistance (iii) Insulation resistance (iv) Earth resistance.
Last Answer : Following are the methods used to measure resistances:-  (i) Low resistance: 1.Voltmeter-Ammeter Method 2. Kelvin's Double bridge Method  (ii) Medium resistance: 1.Voltmeter-Ammeter Method 2. ... of Charge Method  (iv) Earth resistance : 1. Fall of Potential Method 2. Earth tester

Show More

2.6k views 1 answer







An ac voltmeter using full -wave rectification and having a sinusoidal input has an ac sensitivity equal to  (1) 1.414 times dc sensitivity (2) dc sensitivity (3) 0.9 times dc sensitivity (4) 0.707 times dc sensitivity
Last Answer : An ac voltmeter using full -wave rectification and having a sinusoidal input has an ac sensitivity equal to 0.9 times dc sensitivity

Show More

606 views 1 answer








Last Answer : The multiplier and the meter coil in a voltmeter are in series.

Show More

181 views 1 answer







Use Voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R—C series circuit, draw phasor diagram.
Last Answer : Use Voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R-C series circuit, draw phasor diagram. Practical Significance In the industry environment ... autotransformer position to zero and switch OFF the supply. 8. Draw the phasor diagram.

Show More

459 views 1 answer







Use Voltmeter, ammeter, wattmeter to determine active, reactive and apparent power consumed in given R-L series circuit, draw phasor diagram.
Last Answer : Practical Significance In the industry environment Electrical Engineering diploma graduate are expected to measure basic parameters like voltage, frequency, time period etc. for R-L series circuits. Therefore ... /varying L. 7. Draw the phasor diagram for each of reading for verification.

Show More

515 views 1 answer







operation of half wave rectifier type AC Voltmeter.
Last Answer :  Half-wave Rectifier Voltmeter The d'Arsonval meter movement only responds to the average or dc value of the current through the moving coil. In order to measure alternating ... ) input voltage signal alternating signal needs to be rectified first by using diode rectifier to produce 

Show More

270 views 1 answer







advantages of DVM over electric voltmeter?
Last Answer : Advantages:  1) In case of digital volt meter the output signals is available in the form of discrete numerical. Where as in analog voltmeter, output is made available by using pointer ... using a suitable transducer the quantities such as temperature, pressure, etc. can also be measured.

Show More

119 views 1 answer







How range of A.C. ammeter & A.C. voltmeter is extended? Draw suitable diagram.
Last Answer : Extension of A.C. Ammeter Range: The range of a.c. ammeter can be extended by using CT, the arrangement is shown in figure. The CT is current transformer having less number of primary turns carrying high ... high magnitude of source voltage. In this way range of a.c. voltmeter can be extended.

Show More

456 views 1 answer







Draw a typical electric circuit including ammeter and voltmeter.
Last Answer : The figure shows typical electric circuit including ammeter and voltmeter. Ammeter is connected in series for measurement of current. Voltmeter is connected in parallel for measurement of voltage. Fuse is use ... are used. If the electric supply is DC the DC ammeter and DC voltmeter are used.

Show More

325 views 1 answer







The operation of a ramp type Digital Voltmeter is based on the principle of (A) Voltage-to-current conversion. (B) Voltage-to-time conversion. (C) Current-to-time conversion. (D) Current-to-frequency conversion.
Last Answer : The operation of a ramp type Digital Voltmeter is based on the principle of Voltage-to-time conversion.

Show More

134 views 1 answer







what is voltmeter ?
Last Answer : Voltmeter is an instrument which is use for measuring voltage in volts.

Show More

163 views 1 answer







A Pyrheliometer is an instrument to measure :  (A) temperature of solar photovoltaic cell  (B) intensity of direct solar radiation at normal incidence  (C) intensity of indirect solar radiation  (D) efficiency of a solar photovoltaic cell
Last Answer : A Pyrheliometer is an instrument to measure : intensity of direct solar radiation at normal incidence 

Show More

179 views 1 answer







Piezoelectric Transducer is used to measure  (1) displacement (2) resistance (3) current (4) temperature
Last Answer : Piezoelectric Transducer is used to measure displacement 

Show More

193 views 1 answer







Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these
Last Answer : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

Show More

2.8k views 1 answer








Last Answer : It is required to measure the true open circuit e.m.f. of a battery. The best device is D.C. potentiometer.

Show More

284 views 1 answer








Last Answer : Integrating instruments are those which measure the total quantity of electricity delivered in a particular time.

Show More

397 views 1 answer







What is the unit of measure for voltage?
Last Answer : Voltage measured in volts.

Show More

143 views 1 answer







What type of meter is used to measure current?
Last Answer : Ammeter

Show More

2.7k views 3 answers







What equipment is used to measure voltage?
Last Answer : Voltmeter is used to measure voltage.

Show More

276 views 2 answers








Last Answer : Yes it can...

Show More

92 views 1 answer







Resistance grounding is normally used for :  (A) high voltage long over head transmission lines  (B) low voltage short over head transmission lines  (C) extra high voltage long over head transmission lines  (D) all the above
Last Answer : Resistance grounding is normally used for : low voltage short over head transmission lines

Show More

94 views 1 answer







When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially short circuited because  (A) Cables have a low value of capacitance which draws a high ... high value of charging current (D) Cables have a low value of capacitance and initial resistance
Last Answer : When measuring insulation resistance of cables using d.c. source, the galvanometer used should be initially short circuited because Cables have a high value of capacitance which draws a high value of charging current

Show More

854 views 1 answer







A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is (A) 1 Ω (B) 1.001 Ω (C) 0.5 Ω (D) 10 Ω
Last Answer : A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is 1.001 Ω

Show More

362 views 1 answer







The transducer with negative temperature co-efficient of resistance is (A) Thermistor (B) Resistance Thermometer (C) Strain Gauge (D) Thermocouple
Last Answer : The transducer with negative temperature co-efficient of resistance is Thermistor

Show More

90 views 1 answer








Last Answer : For measuring a very high resistance we should use Meggar.

Show More

134 views 1 answer








Last Answer : Meggar is an instrument which measures the insulation resistance of an electric circuit relative to earth and one another.

Show More

376 views 1 answer








Last Answer : Yes ammeter has its own resistance Not only ammeter every electrical devices has there own resistance practicaly

Show More

123 views 1 answer







How to Measure Optical Distortion
Last Answer : How to Measure Optical Distortion Optical Distortion is defined as a defect in an optical system. In this defect, the magnification of lines causes lines that are typically straight and sitting at an ... to measure optical illusions and also how the illusion is affecting the way you see a specimen.

Show More

13 views 1 answer







How to Measure a Strain Gauge
Last Answer : How to Measure a Strain Gauge There are several ways to measure strain. The most common is to use a strain gauge. In laymen's terms, a strain gauge is a device whose electrical ... who supply all the necessary strain gauges and materials from connection tags, to binding adhesives and training.

Show More

35 views 1 answer







How to Read a Tape Measure
Last Answer : How to Read a Tape Measure Introduction Reading a tape measure is fairly simple. At some point, you may need to learn this method. Everyone is presented with the need for this device at one time or ... hand. Take extra care and check the measurement 2 or 3 times to be sure that they are correct.

Show More

9 views 1 answer







How to Measure Temperature
Last Answer : How to Measure Temperature Whether you're measuring body temperature or dealing with high-temperature substances in laboratories, you need a very reliable way to measure heat. Thermometers and temperature ... or from an object. With these steps, you can measure temperature quickly and accurately.

Show More

11 views 1 answer







How to Measure For Replacement Windows
Last Answer : How to Measure For Replacement Windows You could have any number of reasons for wanting to replace your windows. Windows that are older are often far less energy efficient than the newer vinyl ... probably even give you a rebate for choosing energy efficient windows to replace your old windows.

Show More

12 views 1 answer







How to Measure For a Garage Door
Last Answer : How to Measure For a Garage Door At some point you will probably need a new garage door. Before getting the new door, however, you will need to take some measurements. This article explains how to measure ... a new garage door you needn't worry if the garage door you buy will fit into the opening.

Show More

7 views 1 answer







How to Measure Tire Sizes
Last Answer : How to Measure Tire Sizes Buying a new set of tires is just like buying shoes: you have to make sure that your tires fit perfectly on the wheel. Tires that are too small or too big for your ... , you can buy a set of tires designed and custom-fit to make your driving experience safe and secure.

Show More

4 views 1 answer







Draw venture meter and write steps to measure flow rate.
Last Answer : Venturi meter consists of three sections that is converging section, throat section and diverging section. The flow is introduced to the meter through the inlet with diameter D' . The inclined angle ... to 15o . Flow rate is proportional to the square root of the differential pressure.

Show More

91 views 1 answer







Explain the term reactive power. Why it is sometimes essential to measure reactive power?
Last Answer : Reactive power: The reactive power (Q) is defined as the product of voltage(V), current (I) and sine of angle between voltage(V) and current( I) Therefore Reactive power Q = V I ... power so that corrective measures can be taken accordingly to maintain systems power factor near to the unity.

Show More

82 views 1 answer







List any four measure knobs on front panel on CRO.
Last Answer : Knobs on front panel of CRO: 1. Power ON- OFF 2. Intensity control 3. Focus control 4. Astigmatism control 5. Volt/Div control 6. Vertical position control 7. Invert 8. Horizontal position control 9. Synchronization. 10. Channel selection.

Show More

211 views 1 answer







‘PMMC instrument is not suitable to measure AC quantity’. State the reason.
Last Answer : The direction of force exerted on moving coil depends on the direction of current flowing through moving coil. If the direction of magnetic field is kept constant, it produces unidirectional torque if the current is ... on the coil in one cycle to zero. Hence the meter cannot read A.C. quantities.

Show More

370 views 1 answer







A _________ is used to measure the stator % winding temperature of the generator.  (A) Thermocouple (B) Pyrometer (C) Resistance thermometer (D) Thermometer
Last Answer : A Resistance thermometer is used to measure the stator % winding temperature of the generator. 

Show More

3.4k views 1 answer







An open-circuit test on a transformer is conducted primarily to measure?
Last Answer : The open-circuit test in a transformer is used to measure

Show More

626 views 2 answers







How do you measure the speed of a motor?

Show More

45 views 0 answers







What are ways we can measure the flow of electrons?

Show More

111 views 0 answers







How do you measure power factor?
Last Answer : P= 1.83*V*I*COS@ where P is power           V is voltage            I is current           COS @ is P.F COS@= P/(1.83*V*I)  in other way cos @ = true power/apparent power

Show More

97 views 1 answer







What does an electric meter measure?

Show More

71 views 0 answers







A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is (A) 9997 Ω (B) 10000 Ω (C) 997 Ω (D) 10003 Ω
Last Answer : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is 9997 Ω

Show More

193 views 1 answer







How many quarts are in a gallon?
Last Answer : 4?

Show More

1 view 1 answer







What affect does the thickness of a wire have on its resistance?
Last Answer : Ans: The resistance of a wire decreases as its thickness increases.

Show More

5 views 1 answer







Which of these has the lowest resistance?
Last Answer : b) Copper has the lowest resistance. 

Show More

7 views 1 answer






Show More⇦ PreviousNext ⇨