Two capacitors connected in parallel results in

by

1 Answer

Answer :

Two capacitors connected in parallel results in More capacitance.

by

Related questions

How will the total capacitance change, when two capacitors are connected in parallel?

Description : How will the total capacitance change, when two capacitors are connected in parallel?

Last Answer : The  capacitance  will  increase  if  connected  in  parallel  because  it  will  be  like  you  have  increase  surface  area  of  a  plate  by  connecting  it  to   another.

If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Description : If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Last Answer : same

In a full-wave voltage doubler, are the capacitors connected in series or in parallel with the output load?

Description : In a full-wave voltage doubler, are the capacitors connected in series or in parallel with the output load?

Last Answer : In parallel.

Three capacitors 15µf, 18µf and 12µf are connected in a circuit. Find equivalent capacitance when they are connected in – 1) Series 2) Parallel

Description : Three capacitors 15µf, 18µf and 12µf are connected in a circuit. Find equivalent capacitance when they are connected in – 1) Series 2) Parallel

Last Answer : Ans: Value of equivalent capacitance: Given: C1= 15μF, C2=18 µF, C3= 12µF  i)For Series combination of capacitors: 1/Cs = (1/C1)+( 1/C2) +(1/C3) = (1/15)+( 1/18)+( 1/12) 1/Cs = 0.0666+0.0555+0. ... Cs = 4.868 µF   ii) For parallel combination of capacitors: Cp = C1 + C2 + C3 = 15 +18+ 12 = 45 µF 

Equivalent capacitance ‘C’ of a system of capacitors C1,C2,C3 connected in parallel is

Description : Equivalent capacitance ‘C’ of a system of capacitors C1,C2,C3 connected in parallel is

Last Answer : Equivalent capacitance ‘C’ of a system of capacitors C1,C2,C3 connected in parallel is C = C1+C2+C3

what will be the capacitance if three capacitors connected in parallel each having value of 0.5 micro Farad ?

Description : what will be the capacitance if three capacitors connected in parallel each having value of 0.5 micro Farad ?

Last Answer : the total capacitace when connected in parallel Tc=total capacitor c1=c2=c3=0.5uf Tc=c1+c2+c3 Tc=1.5uf

What will happen when capacitors are connected in parallel?

Last Answer : The capacity of capacitor is added and it becomes multiple of no of capacitors capacity

What are the different types of capacitors?

Description : What are the different types of capacitors?

Last Answer : (b) is facilitated by telomerase

Which capacitors are suitable for DC filter circuits?

Description : Which capacitors are suitable for DC filter circuits?

Last Answer : Electrolytic capacitors are suitable for DC filter circuits.

Identical dielectric slabs are inserted into two identical capacitors `A` and `B`. These capacitors and a battery are connected as shown in figure. No

Description : Identical dielectric slabs are inserted into two identical capacitors `A` and `B`. These capacitors and a battery are connected as shown in figure. No

Last Answer : Identical dielectric slabs are inserted into two identical capacitors `A` and `B`. These capacitors ... , which fully appears as heat in the circuit

How are synchro capacitors connected in a circuit?

Description : How are synchro capacitors connected in a circuit?

Last Answer : They are delta-connected across the stator windings.

The effective capacitance of four, 5-microfarad capacitors connected in series is: w) 0.20 microfarad x) 0.5 microfarad y) 1.0 microfarad z) 1.25 microfarad

Description : The effective capacitance of four, 5-microfarad capacitors connected in series is: w) 0.20 microfarad x) 0.5 microfarad y) 1.0 microfarad z) 1.25 microfarad

Last Answer : ANSWER: Z -- 1.25 MICROFARAD

Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x) The magnitude of the charge is the same on all of the capacitor plates. y) The capacitance of the system depends on the voltage applied across the three capacitors.

Description : Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x ... y) The capacitance of the system depends on the voltage applied across the three capacitors.

Last Answer : ANSWER: X -- THE MAGNITUDE OF THE CHARGE IS THE SAME ON ALL OF THE CAPACITOR PLATES

A battery of 40 V and three capacitors of 1000 μF, 500 μF and 100 μF are all connected in

Description : A battery of 40 V and three capacitors of 1000 μF, 500 μF and 100 μF are all connected in (I) parallel and (II) series. The ratio of total charge stored in case I to that in case II is approximately  (a) 3 : 64 (b) 64 : 3 (c) 160 : 3 (d) 104 : 5

Last Answer : A battery of 40 V and three capacitors of 1000 μF, 500 μF and 100 μF are all connected in (I) parallel and (II) series. The ratio of total charge stored in case I to that in case II is approximately 104 : 5

There resistors of 3Ω, 10Ω, and 15Ω are connected in parallel to a 30 V...

Description : There resistors of 3Ω, 10Ω, and 15Ω are connected in parallel to a 30 V circuit the current that will flow through the 3Ω resistor is 

Last Answer : There resistors of 3Ω, 10Ω, and 15Ω are connected in parallel to a 30 V circuit the current that will flow through the 3Ω resistor is 10A.

[75] Two transformers are connected in parallel. These transformers do not have equal percentage impedance which results A. Short-circuiting of the secondaries B. Power factor of one of the transformers is leading while that of the other lagging C. Transformers having higher copper losses will have negligible core losses D. Loading of the transformers not in proportion to their kVA ratings.

Description : [75] Two transformers are connected in parallel. These transformers do not have equal percentage impedance which results A. Short-circuiting of the secondaries B. Power factor of one of the ... have negligible core losses D. Loading of the transformers not in proportion to their kVA ratings.

Last Answer : D. Loading of the transformers not in proportion to their kVA ratings

What is Law of capacitors in parallel?

Description : What is Law of capacitors in parallel?

Last Answer : Need answer

Heat flux through several resistances in series in analogous to the current flowing through several (A) Resistances in parallel (B) Capacitors in series (C) Resistances in series (D) None of these

Description : Heat flux through several resistances in series in analogous to the current flowing through several (A) Resistances in parallel (B) Capacitors in series (C) Resistances in series (D) None of these

Last Answer : (C) Resistances in series

Do capacitors in parallel have the same voltage?

Description : Do capacitors in parallel have the same voltage?

Last Answer : Not same but we will get addition of both values when capacitors are connected in parallel...

The polarisation of dielectric material results in

Last Answer : The polarisation of dielectric material results in Creation of electric dipoles.

A snubber circuit is connected to the power semiconductor device to reduce the

Description : A snubber circuit is connected to the power semiconductor device to reduce the (A) turn-on time (B) turn-off time (C) electrical stresses (D) thermal resistance

Last Answer : A snubber circuit is connected to the power semiconductor device to reduce the electrical stresses

Norton’s theorem states that a complex network connected to a load can be replaced with an equivalent

Description : Norton’s theorem states that a complex network connected to a load can be replaced with an equivalent impedance (A) in series with a current source (B) in parallel with a voltage source (C) in series with a voltage source (D) in parallel with a current source

Last Answer : in parallel qith current source

To increase the ampere hour capacity of secondary cells, the cells are to be connected in

Last Answer : To increase the ampere-hour capacity of secondary cells, the cells are to be connected in Parallel.

When a transistor is connected in common emitter mode, it with have

Last Answer : When a transistor is connected in common emitter mode, it with have medium input resistance and high output resistance.

Is there any relation between the capacitances of two capacitors used in two value capacitor start capacitor run motor?

Description : Is there any relation between the capacitances of two capacitors used in two value capacitor start capacitor run motor?

Last Answer : Ans: Starting capacitor has about 10 – 15 times high capacity than the value of running capacitor.

What are the two common methods for obtaining integrated capacitors?

Description : What are the two common methods for obtaining integrated capacitors?

Last Answer : • Monolithic junction capacitor • Thin-flim capacitor

Find the total capacitances when two capacitors 2F and 5F are in series. a) 5/7 b) 12/7 c) 2/5 d) 10/7

Description : Find the total capacitances when two capacitors 2F and 5F are in series. a) 5/7 b) 12/7 c) 2/5 d) 10/7

Last Answer : d) 10/7

What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF,

Description : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Last Answer : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

If the centrifugal switch of a two-value capacitor motor using two capacitors fails to open then?

Last Answer : If the centrifugal switch of a two-value capacitor motor using two capacitors fails to open then Electrolytic capacitor will, in all probability, suffer break down.

The condition for parallel operation of two inverters is

Description : The condition for parallel operation of two inverters is • Amplitude of voltages should be same. • Frequency of voltages should be same. • Both the voltages should be in same phase. • All the three above.

Last Answer : The condition for parallel operation of two inverters is • Amplitude of voltages should be same. • Frequency of voltages should be same. • Both the voltages should be in same phase. • All the three above.

I need to buy really low voltage electrolytic capacitors.

Description : I need to buy really low voltage electrolytic capacitors.

Last Answer : answer:Allied Electronics http://www.alliedelec.com/ Weird hobby though.

How do I test how well capacitors are functioning?

Description : How do I test how well capacitors are functioning?

Last Answer : What kind? Flux?

Can I charge these capacitors with a 6v lantern battery?

Description : Can I charge these capacitors with a 6v lantern battery?

Last Answer : Never mind, my brain wasn’t working.

How many types of capacitors and what are they ?

Description : How many types of capacitors and what are they ?

Last Answer : There are three types of capacitors. For example: 1. Fixed capacitor. 2. Adjustable capacitor. 3. Variable capacitor.

What is the use of capacitors in fire alarm circuit?

Description : What is the use of capacitors in fire alarm circuit?

Last Answer : Fire alarm system may be having some electronic devices andcards, in which some capacitors are used. Capacitors are part ofany electronic cards.

What is the use of capacitors in fire alarm circuit?

Description : What is the use of capacitors in fire alarm circuit?

Last Answer : Fire alarm system may be having some electronic devices andcards, in which some capacitors are used. Capacitors are part ofany electronic cards.

In order to improve the power factor ___ device is employed in the substation a) Synchronous condenser b) Synchronous reactor c) Series Capacitors d) None of the above

Description : In order to improve the power factor ___ device is employed in the substation a) Synchronous condenser b) Synchronous reactor c) Series Capacitors d) None of the above

Last Answer : Ans: A

In the schematic of the electrical circuit shown in the illustration, what is the value of the total capacitance, when compared to the value of equal individual capacitors? EL-0038 A. Equal B. Half C. Double D. Squared

Description : In the schematic of the electrical circuit shown in the illustration, what is the value of the total capacitance, when compared to the value of equal individual capacitors? EL-0038 A. Equal B. Half C. Double D. Squared

Last Answer : Answer: C

Regarding the illustrated electrical schematic, 'S1-P', 'S1-Q', and 'S1-R' represent ____________. EL-0016 A. capacitors B. normally-closed contacts C. normally-open contacts D. normally-closed pushbutton switches

Description : Regarding the illustrated electrical schematic, 'S1-P', 'S1-Q', and 'S1-R' represent ____________. EL-0016 A. capacitors B. normally-closed contacts C. normally-open contacts D. normally-closed pushbutton switches

Last Answer : Answer: C

When replacing component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its base B. there is a danger of phosphor poisoning should 'B''s bulb break C. component 'D' must be closed during the replacement to provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Description : When replacing component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its ... provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Last Answer : Answer: D

A switchboard ammeter indicates a reading slightly above 'zero' when the leads are disconnected, this is caused by _____________. A. mechanical misalignment of the meter pointer B. a poor ground for the meter case C. static electricity in the air D. capacitors inside the meter storing charges

Description : A switchboard ammeter indicates a reading slightly above 'zero' when the leads are disconnected, this is caused by _____________. A. mechanical misalignment of the meter pointer B. a poor ground for the meter case C. static electricity in the air D. capacitors inside the meter storing charges

Last Answer : Answer: A

When working on electrical circuits containing large capacitors, in addition to deenergizing the circuit, which of the listed precautions should also be taken? A. Keep all radio equipment away. B. Measure capacitor insulation resistance. C. Ground the capacitor terminals. D. Check capacitor circuit polarity.

Description : When working on electrical circuits containing large capacitors, in addition to deenergizing the circuit, which of the listed precautions should also be taken? A. Keep all radio equipment ... capacitor insulation resistance. C. Ground the capacitor terminals. D. Check capacitor circuit polarity.

Last Answer : Answer: C

Capacitors can be used in electric distribution systems to improve power factor. This is accomplished by seesawing energy between the capacitor and the _____________. A. generator B. inductive loads C. resistive loads D. all of the above

Description : Capacitors can be used in electric distribution systems to improve power factor. This is accomplished by seesawing energy between the capacitor and the _____________. A. generator B. inductive loads C. resistive loads D. all of the above

Last Answer : Answer: B

Which of the devices listed is indicated by the symbols lettered 'A' to 'F', shown in the illustration? EL-0016 A. Diodes B. Linear inductors C. Capacitors D. Transistors

Description : Which of the devices listed is indicated by the symbols lettered 'A' to 'F', shown in the illustration? EL-0016 A. Diodes B. Linear inductors C. Capacitors D. Transistors

Last Answer : Answer: A

As shown in the illustration, 'H1' and 'H2' are ___________. EL-0058 A. fixed capacitors B. variable capacitors C. contacts, closed when the circuit is energized D. contacts, open when the circuit is energized

Description : As shown in the illustration, 'H1' and 'H2' are ___________. EL-0058 A. fixed capacitors B. variable capacitors C. contacts, closed when the circuit is energized D. contacts, open when the circuit is energized

Last Answer : Answer: D

Capacitors are used on the output of the power supply in today's consoles to _____________. A. filter out 'ripple' B. prevent overloads C. act as a permanent load D. decrease the average value of the output voltage

Description : Capacitors are used on the output of the power supply in today's consoles to _____________. A. filter out 'ripple' B. prevent overloads C. act as a permanent load D. decrease the average value of the output voltage

Last Answer : Answer: A

Alternating current circuits develop resistance, inductance, and capacitance. The capacitance of individual capacitors is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : Alternating current circuits develop resistance, inductance, and capacitance. The capacitance of individual capacitors is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: D

When changing out component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its base B. there is a danger of phosphor poisoning should 'B''s bulb break C. component 'D' must be closed during the replacement to provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Description : When changing out component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its ... provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Last Answer : Answer: D

Why The Capacitors Works On Ac Only?

Description : Why The Capacitors Works On Ac Only?

Last Answer : Generally capacitor gives infinite resistance to dc components(i.e., block the dc components). it allows the ac components to pass through.

Why shaded-pole single phase induction motor does not need any special starting technique like capacitors and auxiliary winding etc.

Description : Why shaded-pole single phase induction motor does not need any special starting technique like capacitors and auxiliary winding etc.

Last Answer : Because it is inherently self started motor. The construction of the poles is such that they give a sweep to the magnetic flux and motor starts rotating.