How to Use a Laser Level
Compared to the ordinary level, a laser level is more efficient and easier to use. It projects a laser beam forward, making sure the measurements for the project you work on comes out level. A laser level can guide you effectively, but if used improperly, can lead to drastic results. If you don’t know how to use this tool, follow these tips.
What You’ll Need:
Laser level
Mounting device
Laser level remote control
Pencil (for marking)
Buying A Laser Level
The efficiency of your laser level depends on how well you choose one. The kind of level must be in accordance with the project or place you’re working on. There are several different types, so here are a few guidelines.
laser level
If it’s a small do-it-yourself task, you can just buy an inexpensive level that can be manually leveled. If it’s a bigger project, such as outdoor or indoor construction, you might need a self leveling level type.
Check your laser level’s accuracy. One with an accuracy reading of less than 1 mm is a good option.
A level with a good projection range is great for outdoor projects. Find one with a range that can reach more than 250 feet.
If you often do leveling projects outdoors, find a laser level with a laser receiver. This has a bright beam which can be seen even in sunlight. If not, there’s no need for this function. If you do use the level both indoors and outdoors, opt for a rotary laser level.
Other special features, such as automatic calibration and remote controls, are ideal.
Using The Tool
Set down the laser level where you’ll be needing it. You need to put it on a solid surface for the best results.
If needed, buy a mounting device to keep the level in place. Tripods, stands and mounting brackets are available to help you out.
Once you’ve set the level down, it will find a level and shoot a constant red line.
Using the remote control, set the position of the level where you need it, and keep it there.
If, for example, you’re hanging up a picture and marking a wall, mark the area first with a pencil. Then, hold the straight line level on the spot. This will make a red line straight to the wall, telling you where to put the screw or nail.
If there’s a problem the laser level will give you a signal. Usually, this occurs if the level is jolted or hit.
A laser level is very handy, and as long as it’s properly used, it’ll make you finish any task quicker and more efficiently. Just remember these steps and tips when you’re working with this tool.