What does inspect mean ?

What does inspect mean ?
by

1 Answer

Answer :

Inspect means to supervise.
by

Related questions

Safari Web Inspector - Keyboard Shortcut for Inspect Element?

Description : Safari Web Inspector - Keyboard Shortcut for Inspect Element?

Last Answer : Not that I know of, sorry. computerhope.com these guys might be able to help

I found a crack in my basement wall behind the insulation that the builder originally installed. Is it ok to finish the basement without tearing down all of the insulation to inspect?

Description : I found a crack in my basement wall behind the insulation that the builder originally installed. Is it ok to finish the basement without tearing down all of the insulation to inspect?

Last Answer : Is the house new? If so the builder might still be responsible for repairs. And yes, if there is moisture around the crack you need to have that looked at. You do not want to finish out ... french drains outside to deal with the water / moisture issue that started the cracking in the first place.

A carpenter built a new house on some property he owned. When he went to inspect his new house, he observed a large animal had taken up residence in the new house. However, the carpenter was not surprised by this. He made no attempt to chase the large animal from the house, nor did he call animal control to have the animal removed. In fact, he provided food and water to the animal on an ongoing basis at his own expense. Why wasn't the carpenter upset about the animal living in his newly built house? -Riddles

Description : A carpenter built a new house on some property he owned. When he went to inspect his new house, he observed a large animal had taken up residence in the new house. However, the carpenter was ... own expense. Why wasn't the carpenter upset about the animal living in his newly built house? -Riddles

Last Answer : The new house the carpenter had just built was a dog house. He built it for the new dog he had just purchased ----- a massive Saint Bernard.

Is inspect a noun or a verb?

Description : Is inspect a noun or a verb?

Last Answer : The word 'inspect' is a verb, a word meaning to look at carefully; to inspect; a word for an action.The noun forms of the verb to 'inspect' are inspector, inspection, and the gerund, inspecting.

How to Inspect Gantry Cranes in Regular Service?

Description : How to Inspect Gantry Cranes in Regular Service?

Last Answer : Gantry cranes are mostly designed to lift extremely heavyobjects and are very powerful machines. Almost always, they come inmassive sizes. Any malfunction can lead to serious injuries anddamages. Frequent ... noises, as wells as vibrations, andthe overall functioning of the gantry.2. Make sure

Who do I call to inspect and clean a chimney?

Description : Who do I call to inspect and clean a chimney?

Last Answer : Who do I call to inspect and clean a chimney?

How often do termite exterminators need to inspect your home?

Description : How often do termite exterminators need to inspect your home?

Last Answer : It depends on in what part of the country you live. Some experts say once a year and if you have ever had termites you may even need twice a year inspections.

Inspect your Roof without Walking on the Roofing Shingles?

Description : Inspect your Roof without Walking on the Roofing Shingles?

Last Answer : Every roof requires regular inspections so repairs can be made before leaks set in. You can inspect your roof without every setting foot on your shingles by using a pair of binoculars. Staying on the ... indicate a loss of the protective granules and could indicate that it's time for a new roof.

What is the role of "Ombudsman" in a bank? (1) To provide quality and speedy redressal of grievances of customers. (2) To provide suggestions for innovative schemes in the banks. (3) To inspect the internal working of the branches. (4) To monitor the poverty alleviation programmes under-taken by or implemented by the bank.

Description : What is the role of "Ombudsman" in a bank? (1) To provide quality and speedy redressal of grievances of customers. (2) To provide suggestions for innovative schemes in the banks. (3) To ... the branches. (4) To monitor the poverty alleviation programmes under-taken by or implemented by the bank.

Last Answer : (1) To provide quality and speedy redressal of grievances of customers. Explanation: The Banking Ombudsman Scheme enables an expeditious and inexpensive forum to bank customers for resolution of complaints relating ... Section 35 A of the Banking Regulation Act, 1949 by RBI with effect from 1995.

According to _________, Any person can also search and inspect the records maintained by the Registry on payment of fees. A. Securitisation and Reconstruction of Financial Assets and Enforcement of Security Interest Act, 2002. B. Companies Act, 1956 C. Both (A) and (B) D. Securitisation and Reconstruction of Financial Assets and Enforcement of Security Interest (Central Registry) Rules, 2011 E. None of these

Description : According to _________, Any person can also search and inspect the records maintained by the Registry on payment of fees. A. Securitisation and Reconstruction of Financial Assets and Enforcement of ... Assets and Enforcement of Security Interest (Central Registry) Rules, 2011 E. None of these

Last Answer : D. Securitisation and Reconstruction of Financial Assets and Enforcement of Security Interest (Central Registry) Rules, 2011 Explanation: Any person can also search and inspect the records maintained by the ... are planning to purchase, is free of any loan/security interest created by a lender.

RBI can inspect the branches of Banks under _______ of the Banking Regulation Act, 1949 A. Section 35 B. Section 25 C. Section 15 D. Section 30 E. None of the Above

Description : RBI can inspect the branches of Banks under _______ of the Banking Regulation Act, 1949 A. Section 35 B. Section 25 C. Section 15 D. Section 30 E. None of the Above

Last Answer : A. Section 35 Explanation: RBI can inspect the branches of Banks under section 35 of the Banking Regulation Act, 1949

Which of the following is a function of SEBI? A. to approve by−laws of stock exchanges. B. inspect the books of accounts of financial intermediaries. C. to require the stock exchange to amend their by−laws. D. compel certain companies to list their shares in one or more stock exchanges. E. All of the Above

Description : Which of the following is a function of SEBI? A. to approve by−laws of stock exchanges. B. inspect the books of accounts of financial intermediaries. C. to require the stock exchange to amend their ... compel certain companies to list their shares in one or more stock exchanges. E. All of the Above

Last Answer : E. All of the Above Explanation: Function of SEBI: To approve by−laws of stock exchanges. Inspect the books of accounts of financial intermediaries. To require the stock exchange to amend their by−laws. Compel certain companies to list their shares in one or more stock exchanges.

An open in the armature of a DC motor is suspected, but is not found by visual inspection of the commutator. The next step in troubleshooting this problem is to ________________. A. conduct a bar to bar test of the armature B. visually inspect the armature windings C. conduct an insulation resistance test of the armature D. test the commutator for a ground

Description : An open in the armature of a DC motor is suspected, but is not found by visual inspection of the commutator. The next step in troubleshooting this problem is to ________________. A. conduct a ... windings C. conduct an insulation resistance test of the armature D. test the commutator for a ground

Last Answer : Answer: A

As part of a routine maintenance program for deck machinery, you should ___________. A. inspect electrical wiring and pushbutton switches for evidence of corrosion or burned insulation B. disassemble pushbutton switches and drain water each week C. remove motor covers and ventilate as weather permits D. Check drum switch contact pressure every three months

Description : As part of a routine maintenance program for deck machinery, you should ___________. A. inspect electrical wiring and pushbutton switches for evidence of corrosion or burned insulation B. disassemble ... covers and ventilate as weather permits D. Check drum switch contact pressure every three months

Last Answer : Answer: A

During maintenance of circuit breakers, _______________. A. always smooth roughened contact surfaces with a file B. never pass more than rated breaker current through the overload heater element C. inspect for wear and misalignment of main contacts D. assume heater elements installed are of correct size

Description : During maintenance of circuit breakers, _______________. A. always smooth roughened contact surfaces with a file B. never pass more than rated breaker current through the overload heater element C. ... wear and misalignment of main contacts D. assume heater elements installed are of correct size

Last Answer : Answer: C

When troubleshooting a console circuit card which is suspected of being faulty, the first step would be to _____. A. pull the card and measure the value of all resistors B. check for the correct value and polarity of all power connections to the card C. de-energize and pull the card to visually inspect for burned components D. check for continuity of circuit board traces and then the gain of each transistor

Description : When troubleshooting a console circuit card which is suspected of being faulty, the first step would be to _____. A. pull the card and measure the value of all resistors B. check for the ... for burned components D. check for continuity of circuit board traces and then the gain of each transistor

Last Answer : Answer: C

Normally, the FIRST step in troubleshooting a transistor circuit card is to _____________. A. carefully remove the transistors from the card B. give the circuit an initial test with a signal generator C. test for continuity with a low voltage DC supply D. visually inspect the card

Description : Normally, the FIRST step in troubleshooting a transistor circuit card is to _____________. A. carefully remove the transistors from the card B. give the circuit an initial test with a signal generator C. test for continuity with a low voltage DC supply D. visually inspect the card

Last Answer : Answer: D

What is the first step in project planning? Select one: a. Establish the objectives and scope. b. Determine the budget. c. Select the team organizational model. d. Determine project constraints. e. Inspect the deliverables.

Description : What is the first step in project planning? Select one: a. Establish the objectives and scope. b. Determine the budget. c. Select the team organizational model. d. Determine project constraints. e. Inspect the deliverables.

Last Answer : a. Establish the objectives and scope.

What is the first step in project planning? Select one: a. Establish the objectives and scope. b. Determine the budget. c. Select the team organizational model. d. Determine project constraints. e. Inspect the deliverables.

Description : What is the first step in project planning? Select one: a. Establish the objectives and scope. b. Determine the budget. c. Select the team organizational model. d. Determine project constraints. e. Inspect the deliverables.

Last Answer : a. Establish the objectives and scope.

When should we inspect a scaffold?

Description : When should we inspect a scaffold?

Last Answer : A Scaffolding shall be inspected and tagged after completing erection. Also before each work period or where they are altered, adjusted or subjected to rain or heavy winds. Thereafter the scaffolding shall be examined at least once in every seven days. 

Who can inspect the components used for erecting a scaffold?

Description : Who can inspect the components used for erecting a scaffold?

Last Answer : A Competent and Certified Scaffolding Supervisor 

The ______RMS must inspect every ______at intervals of about ____such offices and sections in his sub division as are assigned to him by the ______ a) ASP, twelve months six months, Head of the Circle b) Sub divisional Inspector, three months, three months, Head of the Circle c) Sub divisional Inspector, twelve months six months, Head of the Circle d) None of these

Description : The ______RMS must inspect every ______at intervals of about ____such offices and sections in his sub division as are assigned to him by the ______ a) ASP, twelve months six months, Head of the Circle ... c) Sub divisional Inspector, twelve months six months, Head of the Circle d) None of these

Last Answer : c) Sub divisional Inspector, twelve months six months, Head of the Circle

Bulk bags should be so closed as to enable the post office inspect the contents each bag should weigh not less than ____ and not more than_______ a) 10Kg & 30 Kg b) 20 Kg & 30 Kg c) 5 Kg & 30 Kg d) 5 Kg & 20 Kg

Description : Bulk bags should be so closed as to enable the post office inspect the contents each bag should weigh not less than ____ and not more than_______ a) 10Kg & 30 Kg b) 20 Kg & 30 Kg c) 5 Kg & 30 Kg d) 5 Kg & 20 Kg

Last Answer : ) 5 Kg & 30 Kg

How do you service a cooling tower? • Ensure Proper Airflow. . Clean Your Tubes. • Inspect the Water Pump. • All of above

Description : How do you service a cooling tower? • Ensure Proper Airflow. . Clean Your Tubes. • Inspect the Water Pump. • All of above

Last Answer : all of above

How do you service a cooling tower? • Ensure Proper Airflow. Clean Your Tubes. • Inspect the Water Pump. • All of above

Description : How do you service a cooling tower? • Ensure Proper Airflow. Clean Your Tubes. • Inspect the Water Pump. • All of above

Last Answer : All of above

What is the reason to service a cooling tower? a) to ensure proper air flow b) to clean the tubes c) to inspect the water pump d) all of these

Description : What is the reason to service a cooling tower? a) to ensure proper air flow b) to clean the tubes c) to inspect the water pump d) all of these

Last Answer : all of these

Using a standard microscope to inspect a fiber-end face, you observe that all parts of the fiberend face are in focus at the same time. Is the fiber-end face flat, concave, or convex?

Description : Using a standard microscope to inspect a fiber-end face, you observe that all parts of the fiberend face are in focus at the same time. Is the fiber-end face flat, concave, or convex?

Last Answer : Flat.

The most accurate way to evaluate the effectiveness of root planning is by: A. Inspect the root surface with an instrument for root smoothness B. Use air for visual inspection C. Activate a curette against root surface and listen for a high pitched sound which indicates a smooth, hard surface. D. Evaluate the soft tissue at the end of the appointment for a decrease oedema and bleeding E. Evaluate the soft tissues 10 to 14 days later.

Description : The most accurate way to evaluate the effectiveness of root planning is by: A. Inspect the root surface with an instrument for root smoothness B. Use air for visual inspection C. Activate a ... the appointment for a decrease oedema and bleeding E. Evaluate the soft tissues 10 to 14 days later.

Last Answer : E. Evaluate the soft tissues 10 to 14 days later.

In case of distressed bridge category II, ADEN shall inspect the bridge

Description : In case of distressed bridge category II, ADEN shall inspect the bridge

Last Answer : once in 6 months

The Assistant Divisional Engineer should inspect the equipment at every manned level crossing on the subdivision once in a) 2 months b) 3 months c) 4 months d) 6 months*

Description : The Assistant Divisional Engineer should inspect the equipment at every manned level crossing on the subdivision once in a) 2 months b) 3 months c) 4 months d) 6 months*

Last Answer : d) 6 months

George Prakash has a group of farmers who provide him with a regular supply of fresh vegetables. He picks up their produce and has a regular route of grocers and restaurants who inspect and purchase quantities of the items he has on any given day. George's operation is which type of wholesaler? A)Drop shipper B)Limited-line C)Truck D)Cash-and-carry

Description : George Prakash has a group of farmers who provide him with a regular supply of fresh vegetables. He picks up their produce and has a regular route of grocers and restaurants who inspect and purchase ... operation is which type of wholesaler? A)Drop shipper B)Limited-line C)Truck D)Cash-and-carry

Last Answer : C)Truck

What is the role of “Ombudsman” in a bank? (1) To provide quality and speedy redressal of grievances of customers. (2) To provide suggestions for innovative schemes in the banks. (3) To inspect the internal working of the branches. (4) To monitor the poverty alleviation programmes undertaken by or implemented by the bank.

Description : What is the role of Ombudsman in a bank? (1) To provide quality and speedy redressal of grievances of customers. (2) To provide suggestions for innovative schemes in the banks. (3) To ... of the branches. (4) To monitor the poverty alleviation programmes undertaken by or implemented by the bank.

Last Answer : To provide quality and speedy redressal of grievances of customers.