Light duty cranes are generally used in _____________.

by

1 Answer

Answer :

Light duty cranes are generally used in automobile workshops, pumping stations, power houses.

by

Related questions

Which D.C. motor is generally preferred for cranes and hoists ?

Last Answer : D.C. Series motor is generally preferred for cranes and hoists.

In case of travelling cranes, the motor preferred for boom hoist is _________.

Last Answer : In case of travelling cranes, the motor preferred for boom hoist is slip ring induction motor.

How do construction cranes rise up?

Description : How do construction cranes rise up?

Last Answer : Look at rough terrain mobile crane to see if that’s what you mean.

A man wished to move a block of size 3 m x 3 m weighing 80 kg. The coefficient of friction between the block and the ground is 0.27. Which of the following methods should be used? a.Slide along the ground by pushing b.Ask for cranes c.Pull it d.Tip it over e.Lift it bodily

Description : A man wished to move a block of size 3 m x 3 m weighing 80 kg. The coefficient of friction between the block and the ground is 0.27. Which of the following methods should be used? a.Slide along the ground by pushing b.Ask for cranes c.Pull it d.Tip it over e.Lift it bodily

Last Answer : d. Tip it over

I have a mouth, no butt, two cranes and floating vessels. What am I? -Riddles

Description : I have a mouth, no butt, two cranes and floating vessels. What am I? -Riddles

Last Answer : A ship dock!

How to Inspect Gantry Cranes in Regular Service?

Description : How to Inspect Gantry Cranes in Regular Service?

Last Answer : Gantry cranes are mostly designed to lift extremely heavyobjects and are very powerful machines. Almost always, they come inmassive sizes. Any malfunction can lead to serious injuries anddamages. Frequent ... noises, as wells as vibrations, andthe overall functioning of the gantry.2. Make sure

What are gantry cranes commonly used for?

Description : What are gantry cranes commonly used for?

Last Answer : Gantry cranes are commonly seen on docks and are used for lifting containers. There are also smaller versions of gantry cranes that can be used inside workshops or other industrial buildings.

where can i buy some bridge cranes?

Description : where can i buy some bridge cranes?

Last Answer : You can find some bridge cranes for either rental or to buy by looking in your local yellow pages. Or you can check www.Craigslist.com for more great deals

What industries use overhead cranes?

Description : What industries use overhead cranes?

Last Answer : The biggest industry which uses an over head crane would be a construction company, or an architectural company, which works in teh construction and building industry.

Match the following: A. Gir Forest 1. Siberian cranes B. Kaziranga Sanctuary 2. Lions C. Dachigam Sanctuary 3. Indian stag D. Ghana Sanctuary 4. Rhinoceros A B C D (a) 1 2 3 4 (b) 3 1 2 4 (c) 2 4 3 1 (d) 3 2 1 4

Description : Match the following: A. Gir Forest 1. Siberian cranes B. Kaziranga Sanctuary 2. Lions C. Dachigam Sanctuary 3. Indian stag D. Ghana Sanctuary 4. Rhinoceros A B C D (a) 1 2 3 4 (b) 3 1 2 4 (c) 2 4 3 1 (d) 3 2 1 4

Last Answer : Ans: (c)

What is the advantage of vvvf drives over non vvvf drives for EOT cranes?

Description : What is the advantage of vvvf drives over non vvvf drives for EOT cranes?

Last Answer : Answer: Advantages1. Smooth start and stop. 2. No jerking of load. 3. Exact positioning 4. Better protection for motor. 5. High/low speed selection. 6. Reliability of break shoe. 7. Programmable break control. 8. Easy circuitry 9. Reduction in controls 10. Increases motor life

Name the different types of motors used in vacuum cleaners, phonographic appliances, vending machines, refrigerators, rolling mills, lathes, power factor improvement and cranes.

Description : Name the different types of motors used in vacuum cleaners, phonographic appliances, vending machines, refrigerators, rolling mills, lathes, power factor improvement and cranes.

Last Answer : A: Following motors are used: - Vacuum cleaners- Universal motor. Phonographic appliances - Hysteresis motor. Vending machines - Shaded pole motor. Refrigerators - Capacitor split phase ... Cumulative motors. Lathes - DC shunt motors. Power factor improvement - Synchronous motors.

Purpose of hydraulic accumulator is to (A) Ensure intermittent supply of hydraulic pressure (B) Increase the pressure and store/ accumulate it (C) Accumulate pressure to increase force (D) Generate high pressure to operate hydraulic machines like cranes, lifts, presses etc

Description : Purpose of hydraulic accumulator is to (A) Ensure intermittent supply of hydraulic pressure (B) Increase the pressure and store/ accumulate it (C) Accumulate pressure to increase force (D) Generate high pressure to operate hydraulic machines like cranes, lifts, presses etc

Last Answer : (D) Generate high pressure to operate hydraulic machines like cranes, lifts, presses etc

In thermal power plants, coal is transferred from bunker to the other places by [IES-1992] (a) Hoists (b) conveyors (c) cranes (d) lifts

Description : In thermal power plants, coal is transferred from bunker to the other places by [IES-1992] (a) Hoists (b) conveyors (c) cranes (d) lifts 

Last Answer : (b) conveyors

Name the types of motors used in vacuum cleaners, phonographic appliances, vending machines, refrigerators, rolling mills, lathes, power factor improvement and cranes.

Description : Name the types of motors used in vacuum cleaners, phonographic appliances, vending machines, refrigerators, rolling mills, lathes, power factor improvement and cranes.

Last Answer : Following motors are used: - Vacuum cleaners- Universal motor. Phonographic appliances - Hysteresis motor. Vending machines - Shaded pole motor. Refrigerators - Capacitor split phase ... Cumulative motors. Lathes - DC shunt motors. Power factor improvement - Synchronous motors.

The rated loads of lifting cranes, as percentage of tipping load at specified radius, for crawlermounted and pneumatic tyre-mounted machines would be respectively (A) 80 and 90 (B) 90 and 80 (C) 85 and 75 (D) 75 and 83

Description : The rated loads of lifting cranes, as percentage of tipping load at specified radius, for crawlermounted and pneumatic tyre-mounted machines would be respectively (A) 80 and 90 (B) 90 and 80 (C) 85 and 75 (D) 75 and 83

Last Answer : (D) 75 and 83

Buses, trains, trolleys, hoists, cranes require high starting torque and therefore make use of?

Last Answer : Buses, trains, trolleys, hoists, cranes require high starting torque and therefore make use of D.C. series motor.

A CPA who is engaged to prepare an income tax return has a duty to prepare it in such a manner that the tax is: a. The legal minimum. b. Computed in conformity with generally accepted accounting principles. c. Supported by the client’s audited financial statements. d. Not subject to change upon audit

Description : A CPA who is engaged to prepare an income tax return has a duty to prepare it in such a manner that the tax is: a. The legal minimum. b. Computed in conformity with generally accepted ... principles. c. Supported by the client's audited financial statements. d. Not subject to change upon audit

Last Answer : The legal minimum

Universal motors will operate on AC or DC current, and are generally found in _____________. A. portable tools B. large pump motors C. turbo electric main motors D. forced draft fans

Description : Universal motors will operate on AC or DC current, and are generally found in _____________. A. portable tools B. large pump motors C. turbo electric main motors D. forced draft fans

Last Answer : Answer: A

One of the generator bearing shells is generally insulated from the end housing in order to prevent _____________. A. rapid brush wear B. residual magnetism leak off C. excessive field winding heat D. circulation of shaft currents

Description : One of the generator bearing shells is generally insulated from the end housing in order to prevent _____________. A. rapid brush wear B. residual magnetism leak off C. excessive field winding heat D. circulation of shaft currents

Last Answer : Answer: D

The hardware feature of LISP machines generally includes _____________ a) Large memory and high-speed processorb) Letter quality printers and eight-inch disk drives c) A mouse and specialized keyboard d) A mouse and specialized keyboard, Letter quality printers and eight-inch disk drives

Description : The hardware feature of LISP machines generally includes _____________ a) Large memory and high-speed processorb) Letter quality printers and eight-inch disk drives c) A mouse and specialized keyboard d) A mouse and specialized keyboard, Letter quality printers and eight-inch disk drives

Last Answer : d) A mouse and specialized keyboard, Letter quality printers and eight-inch disk drives

Kennedy key is used in (A) Light duty applications (B) Heavy duty applications (C) High speed applications (D) Precision equipments

Description : Kennedy key is used in (A) Light duty applications (B) Heavy duty applications (C) High speed applications (D) Precision equipments

Last Answer : (B) Heavy duty applications

The required spacing between the disc on the gang bolt ranges from 15 to 25 cm for light duty and 25 to 30cm for heavy duty harrows is b. 25 to 35cm c. 25 to 40cm d. None of the above.

Description : The required spacing between the disc on the gang bolt ranges from 15 to 25 cm for light duty and 25 to 30cm for heavy duty harrows is b. 25 to 35cm c. 25 to 40cm d. None of the above.

Last Answer :    <!-- [endif] -->Ans - a. 25 to 30cm

Current levels of off-peak electric capacity are sufficient to power how much of our nations car and light-duty truck fleet? • 19% • 33% • 55% • 73%

Description : Current levels of off-peak electric capacity are sufficient to power how much of our nations car and light-duty truck fleet? • 19% • 33% • 55% • 73%

Last Answer : • 73%

A pulse waveform has a high time of 8 ms and a pulse width of 32 ms. The duty - cycle is equal to:

Description : A pulse waveform has a high time of 8 ms and a pulse width of 32 ms. The duty - cycle is equal to: A. 25% B. 50% C. 1% D. 100%

Last Answer : A pulse waveform has a high time of 8 ms and a pulse width of 32 ms. The duty - cycle is equal to:  25%

A chopper operating at a fixed frequency is feeding an R-L load. As they duty ratio of the chopper is increased...

Description : A chopper operating at a fixed frequency is feeding an R-L load. As they duty ratio of the chopper is increased from 25% to 75%, the ripple in the load current.

Last Answer : Remains constant.